Flat Corner Shelf Installation
t i l e s h o p. c o m
Flat Corner Shelf Installation
b
a
a
b
2. Plan Plan height for installation
of the shower shelf. Cut tile to
allow for the width of shower shelf,
allowing a 2” lateral overlap on both
sides.
3. Edges Notch the shelf each edge
to overlap the tile.
4. TEST Check for fit, making sure the
back of the shelf is in contact with the
backerboard and it overlaps the tile on
each side.
5. adhesive Apply Construction
Adhesive to back side of the shelf.
6. SET
7. WEdge Use wedge spacers to
fit the shelf flush to the upper tile
border.
8. CAulk Apply 100% Silicone to
the top edges of the shelf.
9. smooth Use a wet finger to
smooth the bead.
1. Clean Thoroughly clean the
surface on which the shelf will be
adhered with antibacterial cleaner.
Allow the shelf to dry for 24 hours.
Length a : the thickness of the wall tile
Length b : 2”
Press the shelf firmly in place
applying even pressure.
G e t inspi r e d at t i l e s h o p. c o m
10. sponge Use a damp sponge
to clean the exess caulk from the
tile.
11. scrape Use a utility knife to
remove any extra adhesive from the
bottom of the shelf.
12. accessorize Use your corner
shelf to showcase your finest bath
products.
OTHER HELPFUL HINTS :
-- When planning the height of fixtures it is a good idea to have all the people that are using the shower or tub
act out reaching for soaps or shampoos. The height that feels most comfortable to all people reaching for bath
items is the ideal height for your fixture.
Flat Corner Shelf Checklist
Pro caulk in various colors
220500 antibacterial cleaner
348317 Pro caulk gun
347969 nails
343207 giant sponge
349026 Wedge spacers
G e t inspi r e d at t i l e s h o p. c o m