SAM series
installation mixers / preamplifiers
SAM312, SAM412T,
SAM512T, SAM614T
SAM312 Key features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
3 input channels, 2 main outputs 19” installation mixer
3 MIC/stereo LINE input channel mixer
Input signal pushbutton selector (MIC/LINE) on back panel
Dedicated "Low Line" input with adapated sensibility for low level line signal sources, like mp3 players (iPod®, etc.) and laptop computers
Independent internal assignable phantom power for all MIC inputs
Direct MIX input allows straight forward connection of further mixers
Triple tone control (accessible only with screwdriver)
2 stereo outputs
3 led output level metre
2 additional stereo REC outputs (REC1, REC2)
Mono mode pushbutton
Headphones general MIX monitoring
Full remote MUTE control
Side rack mount ears with 2 possible positions, for front panel alignment with devices in the same rack
SAM412T Key features
Applications
••
••
••
••
••
••
••
••
••
3
Gyms
Licensed venues
Restaurants
Leisure venues
Retail outlets
Boardrooms and conference centres
Entertainment music playback
Education centres
A/V presentations
The SAM mixer
series has been
specially designed
for all public address
and communication
systems requiring
a minimum risk of
unwanted external
manipulation
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
4 MICRO/LINE input channels with independent 3 band tone control 19” installation mixer
4 channels with 2 selectable inputs per channel (balanced micro, line)
Dedicated “Low Line” input with adapated sensibility for low level line signal sources, like mp3 players (iPod®, etc.) and laptop computers
Micro sensitivity level can be adjusted on the back panel
+18V Phantom Power available in all “MIC” inputs
Direct micro input on front panel, channel 1
Includes a talkover assigned to “INPUT 1” with internal release time adjustment
Three-band tone controls for each channel, accessible with a screwdriver
Vu-meter for the mix signal
Output level control
Two internally adjustable output levels
Recording output
Direct access to the mixing bus allowing you to connect another mixer and increase the number of inputs
Remote MUTE control affecting all inputs for connecting fire detection systems and/or other safety devices. Internally programmable “NO / NC” (normally open, normally closed)
Mono/stereo switch
Side rack mount ears with 2 possible positions, for front panel alignment with devices in the same rack
SAM series
SAM512T Key features
installation mixers / preamplifiers
5 input channels, 2 main outputs 19” installation mixer
5 MIC/stereo LINE input channel mixer
Input signal pushbutton selector (MIC/LINE) on back panel
Dedicated “Low Line” input with adapated sensibility for low level line signal sources,
like mp3 players (iPod®, etc.) and laptop computers
PFL on all inputs for headphone monitoring
Independent internal assignable phantom power for all MIC inputs
Channel 1 features integrated TALKOVER on MIC input. Additional front panel MIC connector
Direct MIX input allows straight forward connection of further mixers
Triple tone control (accessible only with screwdriver)
2 stereo outputs with independent volume control
3 LED output level metre
2 additional stereo REC outputs (REC1, REC2)
Mono mode pushbutton
Full remote MUTE control
Side rack mount ears with 2 possible positions, for front panel alignment with devices in the same rack
Product
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
SAM312, SAM412T,
SAM512T, SAM614T
SAM614T Key features ••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
6 input channels routable to 2 main outputs. 19” installation mixer
6 input channels
MIC inputs on channels 1 and 2
Dedicated “Low Line” input with adapated sensibility for low level line signal sources, like mp3 players (iPod®, etc.) and laptop computers
MIC/stereo LINE in channels 3 and 4. Input signal selector (MIC/LINE) on back panel
Stereo LINE on channels 5 and 6
Input signal gain level control (accessible only with a screwdriver)
Each channel features signal present (SP) and CLIP indicators
General phantom power switch located on back panel. Independent internal phantom power assignment to any MIC input
Triple tone control (accessible only with a screwdriver)
2 main stereo outputs with independent volume control
3 LED output level metre
Input channels can be routed to any main output (A,B) or both
2 additional stereo REC outputs (REC1, REC2)
Mono mode selector
Headphones monitoring of selected output (A or B)
Integrated, internally configurable TALKOVER. Affects OUT A and REC A
Built-in, internally programmable TALKOVER. Affects OUT A and REC A
Side rack mount ears with 2 possible positions, for front panel alignment with devices in the same rack
All product characteristics are subject to variation due to production tolerances. ECLER, S.A. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
Motors, 166-168 08038 Barcelona - Spain - Domestic sales / Ventas España (+34) 902221400 Export sales / Ventas Export (+34) 902331400 General calls (+34) 932238403 Fax (+34) 932238404 www.ecler.com
4