Surface Amenity
Punto
A range of surface mounted square IP54 amenity luminaires. Constructed from a
polycarbonate base, with opal or clear prismatic polycarbonate diffuser. Suitable
for use in commercial and industrial areas, hospitals, schools and other applications
where a protected luminaire is required.
Available in black or white base finish
Integral, self-test and central battery emergency
versions available
LED energy saving versions available
Daylight dimming and microwave
detection options available
Tamper proof securing screws available
Punto 310114
presence
Against electric shock Class 1 protected with earthed
metalwork. Against ingress of dust and moisture IP54
Technical Specification.
Ordering Information
(Luminaires supplied c/w white base, prismatic diffuser & lamp)
Code
Weight
(kg)
Total
Total
Watts Lumens
Standards
Luminaire Lamp
Efficacy Efficacy
16W 2D
DLP2D16WPHFL
2.54
19
1050
39
55
28W 2D
DLP2D28WPHFL
2.65
29
2050
50
70
38W 2D
DLP2D38WPHFL
3.16
41
2850
50
69
9W LED*
DLP09LEDWP
2.60
9.7
1255
129
n/a
14W LED*
DLP14LEDWP
2.60
14.5
1591
109
n/a
The Punto range of luminaires is designed and manufactured
to meet the requirements of BSEN 60598 2-1.
Operation
Designed for operation in an exterior environment.
Ambient temperature range:
Normal versions: -5o to +25oC.
Emergency versions: 0o to +25oC.
LED versions: 0o to +25oC.
230V 50Hz nominal input voltage.
Emergency - Integral. Maintained or non-maintained (not LED version)
Integral microwave detector available with LED version.
* LED version is available with 3000 or 4000oK colour temperature. Please use a
suffix of /30 or /40 to suit. Lumens for 14W 3000oK version are 1388.
P h o to me tric s
Options & Accessories
Base colour choice - add suffix to end of product code:
‘W’ White polycarbonate
‘B’ Black polycarbonate
Diffuser choice - add suffix to end of product code:
‘O’ Opal polycarbonate
‘P’ Prismatic clear polycarbonate
Dimming:
DSI, SwitchDIM and DALI dimming ballasts are available on request
Self-contained 3hr emergency - add suffix ‘EM’ e.g. DLP2D28WOHFL/EM
Self-test and central battery options are available upon request.
Product Code:
DLP2D28WPHFL
Lamp:
1 x 28W 2D 4pin
Light Output Ratios:
Up: 0.10 Down: 0.62 Total: 0.72
Spacing to Height Ratios: SHR NOM 1.50 SHR MAX 1.62
Emergency output:
307
Utilisation Factors UF(F)
Room
Room Index
Reflectances
C
Dimensions
W
F
0.75 1.00 1.25 1.50 2.00 2.50 3.00 4.00 5.00
0.70 0.50 0.20
0.35 0.41 0.46 0.50 0.55 0.59 0.61 0.65 0.67
0.50 0.50 0.20
0.33 0.38 0.43 0.46 0.51 0.55 0.57 0.60 0.62
0.00 0.00 0.00
0.21 0.25 0.29 0.32 0.37 0.40 0.42 0.46 0.48
SPECIFICATION
To specify state the following:
A range of surface mounted square IP54 amenity luminaires.
Constructed from a polycarbonate base, with opal or clear prismatic
polycarbonate diffuser. Suitable for use in commercial and industrial
areas, hospitals, schools and other applications where a protected
luminaire is required.
- as Hilclare Punto.
HILCLARE
LIGHTING
MANUFACTURER
Unit 1, Bond Street Industrial Estate, Mancunian Way, Manchester M12 6HW
T: 0161 274 3626 F: 0161 274 3731 E: [email protected] W: www.hilclare.com
Punto 310114
E&OE:
Whilst every effort is made to ensure the accuracy of information contained within this data sheet, due to a policy of continuous product development details are subject to
change without prior notice. Quoted photometric data is based on lamp and control gear from specific manufacturers and can vary.
Surface Amenity
Classification for Protection