REGIONAL HEAD QUARTERS / BRANCHES
Sales Offices
NORTHERN REGION
New Delhi : Vandana, 11,Tolstoy Marg, New Delhi - 110 001.
Jaipur : Church Road P.B. No. 173, Jaipur - 302 001.
Jalandar : B XII - 407, 2nd Floor, Ladowali Road, Nr. BSF Chowk, Jalandar - 144 001.
Lucknow : 3rd Floor, Saran Chamber-II, 5-Park Road, Lucknow - 226 001.
Tel No.
(011) 30416300, 30416319
(0141) 301800, 301824
(0181) 3240990, 3240991
(0522) 3018852, 3018869
Fax No.
23324360
2365371
2226342
2237009
(033) 22829681-22829685,22829942
(0612) 2212751
(0674) 2531277, 2533647
22994218
2229531
2533521
(0361) 2605132, 2543830
(0651) 2281187
2521126
2473473
2281187
Tel No.
(022)67558622,67558598
(079)26587238,26587328,26582780
(0731)2498269, 2498276
Fax No
25795158
26586047
5065621
(0712)2531271,2560870
(0265)2332460, 2332227
2537196
2332458
(020)25534675,25534677
25534684
(044)42247500,55247510
28231973
(080)41391908,41391909
41391900
(0484)2370860, 2370863
2373728
(040)40002300,40002308
(0422)2521829,2521830
40002340
2525334
(0452) 2667771
2667772
REGISTERED OFFICE
CG House, 6th Floor, Dr. Annie Basant Road, Worli, Mumbai-400 030
(022) 24382211/77
24237788
LIGHTING DIVISION-SURVEILLANCE BUSINESS GROUP
Kanjurmarg (East), Bhandup, Mumbai-400 042. (Maharashtra)INDIA
(022)67558697,67558448,67558000
25787283
EASTERN REGION
Kolkata : 50, Chowringhee Road, Kolkata - 700 071.
Patna : Sahayagi Marg, Exhibition Road, Patna-800 001.
Bhubaneshwar : Janpath Tower, 3rd Floor, Ashok Nagar, Unit II,
Bhubaneshwar - 751 009.
Guwahati : C/o. Zenith Drugs & Allied Agencies (P) Ltd., 533,
K.C.Chaudhury Road, Satribari, Guwahati - 781 008
Ranchi : C/o. Ess Ess Agencies, Uphar Cinema Campus,Ratu Road,
Ranchi - 854005.
WESTERN REGION
Mumbai : Crompton Greaves Ltd. Kanjurmarg (East), Mumbai - 400 042.
Ahemdabad : 909, Sakar-II, Near Ellisbridge Police Stn. Ahemdabad-380 036.
Indore : 103-B, Apollo Trade Centre, 2-B, Rajgarh Kothi,
Mumbai-Agra Road, Indore - 452 001.
Nagpur : 3, West High Court, Dharam Peth, Nagpur - 440 010. (Satellite Off.)
Baroda : 10A, Vrundan Colony, Near Hari nagar Water Tank, Gotri Road,
Baroda - 390 007.
Pune : Premium Point Building, 4th Floor, J.M. Road, Shivaji Nagar,
Pune - 411 005.
SOUTHERN REGION
Chennai : 3A, Kodambakkam High Road, P.B.No. 3316, Nungambakkam,
Chennai - 600 034.
Bangalore : 1st Floor, Janardhan Towers, 562/640, Bannerghatta Main Road,
Bilekahalli, Bangalore-560 076.
Cochin : Cherupushpam building, 5th Floor,300-6, Shanmugham Road,
Ernakulum, Cochin-682 031
Secunderabad : Minerva Complex, 94, Sarojinidevi Road, Secunderabad-500 003.
Coimbatore : 658/664, RajLaxmi Plaza, 100 Feet Road, Gandhipuram,
Coimbature-641 037 (Satellite Off.)
Madurai : 2/3, Mangayakarsi Women’s College Road, Paravai,
Madurai-625 402. (Satellite Off.)
email : [email protected] website : www.cglonline.com
HIGHMASTS
&
STREET LIGHTING
POLES
A company that sells quality with diversity
Crompton Greaves Limited an Indian MNC and member of the Gautam Thapar led group of companies
AVANTHA, was established in 1937. Ever since then, the Company has assiduously endeavoured to bring
about meaningful & revolutionary changes in the lives of people, through its wide spectrum of products
and services. Today we proudly associate the corporate positioning line – “Everyday Solutions” with the
legacy left behind by our founder Col. R.E.B. Crompton.
The company’s origins go back to two entrepreneurial ventures in the 19th century. One of them was an
English firm by the name of R.E.B. Crompton & Company, which was founded in 1878 by Colonel Rookes
Evelyn Bell Crompton, a renowned electrical engineer. The other was James Greaves & Company (JGC),
an Indian firm that was established in 1858. In 1927, Crompton & Company merged with F. A. Parkinson,
pioneers in the field of large-scale industrial engineering to form a new company, Crompton Parkinson.
Crompton Parkinson, UK, set up a factory in Worli, Bombay, for the manufacture of small electric motors
and ceiling fans under the style Crompton Parkinson Works (India) Ltd. A marketing organisation under
the banner, Greaves Cotton and Crompton Parkinson (Pvt.) Ltd. was established simultaneously with
Greaves Cotton & Co., the selling agents of Crompton Parkinson Works (India).
From the beginning, R.E.B. Crompton & Company had focused on generation of electricity, with lighting
making up a significant part of its activities. A Crompton dynamo powered the first electric-lit house in the
world at Colchester, Essex. The company set up arc lighting plants at Buckingham Palace, Holyrod Palace,
Crystal Palace and King’s Cross Station, London.
Today, the 70-year young Crompton Greaves’ principal business groups comprise Power Systems,
Industrial Systems and Consumer Products which include the recently introduced IP Surveillance Products.
With the recent acquisitions of the Pauwels Group of Belgium in 2005, Ganz Transelektro and its Associate
Company Transverticum, Hungary, in October 2006 and Microsol Holdings Limited, Ireland, in May 2007
the company is poised to offer superior and complete Power Solutions to its diverse and discerning
clientele. Besides manufacturing facilities, CG’s international operations are spread over every continent
in the world to become one of the largest suppliers from India in each segment of Transformers, Switchgear,
Motors & Generators, Pumps, Fans and Lighting equipment. Its manufacturing and marketing superiority
is spread over seven countries and 140 sales offices, respectively. Apart from developed countries, CG
also enjoys an export presence in the emerging Southeast Asian and Latin American countries.
The Lighting Business Group of Crompton Greaves which is a part of the Consumer Products SBU, has been
a pioneering player in the field of artificial illumination for the last three decades. The Group has added many
firsts to its credit; introduction of IP66 range of streetlights, vacuum pressure impregnation technology
ballasts for FTL, CFL & HID lamps and the next generation T5 lighting systems, to name just a few.
The Baroda Lamp Works with its state-of-the-art manufacturing facilities, manufactures incandescent
lamps, fluorescent tubes, HID lamps and CFL lamps which have found wide acceptance internationally
because of their superior quality.
A sophisticated laboratory houses equipment for development of new products and quality assurance. CG
LUX the in-house lighting design software has rendered lighting calculations simple and quick. This user
friendly software, has many satisfied users viz; consultants, architects and interior designers.
Crompton Greaves’ Lighting is committed to offer the best products and solutions thus establishing a new
standard for good lighting practices. The products which are futuristic in their design and concept
contribute immensely to the ambience, adding a new dimension, for total customer satisfaction.
ISO 14001:1996 Certification
ISO 9001:2000 Certification
ISO 18001:1999 Certification
A company that sells quality with diversity
Crompton Greaves Limited an Indian MNC and member of the Gautam Thapar led group of companies
AVANTHA, was established in 1937. Ever since then, the Company has assiduously endeavoured to bring
about meaningful & revolutionary changes in the lives of people, through its wide spectrum of products
and services. Today we proudly associate the corporate positioning line – “Everyday Solutions” with the
legacy left behind by our founder Col. R.E.B. Crompton.
The company’s origins go back to two entrepreneurial ventures in the 19th century. One of them was an
English firm by the name of R.E.B. Crompton & Company, which was founded in 1878 by Colonel Rookes
Evelyn Bell Crompton, a renowned electrical engineer. The other was James Greaves & Company (JGC),
an Indian firm that was established in 1858. In 1927, Crompton & Company merged with F. A. Parkinson,
pioneers in the field of large-scale industrial engineering to form a new company, Crompton Parkinson.
Crompton Parkinson, UK, set up a factory in Worli, Bombay, for the manufacture of small electric motors
and ceiling fans under the style Crompton Parkinson Works (India) Ltd. A marketing organisation under
the banner, Greaves Cotton and Crompton Parkinson (Pvt.) Ltd. was established simultaneously with
Greaves Cotton & Co., the selling agents of Crompton Parkinson Works (India).
From the beginning, R.E.B. Crompton & Company had focused on generation of electricity, with lighting
making up a significant part of its activities. A Crompton dynamo powered the first electric-lit house in the
world at Colchester, Essex. The company set up arc lighting plants at Buckingham Palace, Holyrod Palace,
Crystal Palace and King’s Cross Station, London.
Today, the 70-year young Crompton Greaves’ principal business groups comprise Power Systems,
Industrial Systems and Consumer Products which include the recently introduced IP Surveillance Products.
With the recent acquisitions of the Pauwels Group of Belgium in 2005, Ganz Transelektro and its Associate
Company Transverticum, Hungary, in October 2006 and Microsol Holdings Limited, Ireland, in May 2007
the company is poised to offer superior and complete Power Solutions to its diverse and discerning
clientele. Besides manufacturing facilities, CG’s international operations are spread over every continent
in the world to become one of the largest suppliers from India in each segment of Transformers, Switchgear,
Motors & Generators, Pumps, Fans and Lighting equipment. Its manufacturing and marketing superiority
is spread over seven countries and 140 sales offices, respectively. Apart from developed countries, CG
also enjoys an export presence in the emerging Southeast Asian and Latin American countries.
The Lighting Business Group of Crompton Greaves which is a part of the Consumer Products SBU, has been
a pioneering player in the field of artificial illumination for the last three decades. The Group has added many
firsts to its credit; introduction of IP66 range of streetlights, vacuum pressure impregnation technology
ballasts for FTL, CFL & HID lamps and the next generation T5 lighting systems, to name just a few.
The Baroda Lamp Works with its state-of-the-art manufacturing facilities, manufactures incandescent
lamps, fluorescent tubes, HID lamps and CFL lamps which have found wide acceptance internationally
because of their superior quality.
A sophisticated laboratory houses equipment for development of new products and quality assurance. CG
LUX the in-house lighting design software has rendered lighting calculations simple and quick. This user
friendly software, has many satisfied users viz; consultants, architects and interior designers.
Crompton Greaves’ Lighting is committed to offer the best products and solutions thus establishing a new
standard for good lighting practices. The products which are futuristic in their design and concept
contribute immensely to the ambience, adding a new dimension, for total customer satisfaction.
ISO 14001:1996 Certification
ISO 9001:2000 Certification
ISO 18001:1999 Certification
EPR/PCP
Trailing Cable
Flood Lighting
Luminaire
Junction Box
Lantern
Carriage
Removable
Ring Suport
Mast Door
Stainless Steel
Wire Rope
Power Cable
Connection
Double Drum Winch
BASIC WIND SPEED IN M/s
(B a s e d o n P a s t 5 0 Y e a r R e c o r d A v a i l a b l e)
Power Tool
Gusset Plate
Base Plate
Remote for
Up & Down
of LC
Foundation Hole
Ty p i c a l B a s e C o m p a r t m e n t o f A H i g h M a s t
BASIC WIND SPEED
I n d i a i s a v a s t c o u n t r y w i t h diverse climatic conditions.
Wind speed at various locations change as per the conditions.
B a s e d o n p a s t 5 0 y e a r s r e cord of basic wind speed, we
LEGEND
Basic Wind Speed
In m/s
55
50
47
p r o v i d e h i g h m a s t s t r u c t u r e s that sustains the basic wind
44
s p e e d o f t h e l o c a t i o n & h e a d loads.
39
33
Colour
Scheme
EPR/PCP
Trailing Cable
Flood Lighting
Luminaire
Junction Box
Lantern
Carriage
Removable
Ring Suport
Mast Door
Stainless Steel
Wire Rope
Power Cable
Connection
Double Drum Winch
BASIC WIND SPEED IN M/s
(B a s e d o n P a s t 5 0 Y e a r R e c o r d A v a i l a b l e)
Power Tool
Gusset Plate
Base Plate
Remote for
Up & Down
of LC
Foundation Hole
Ty p i c a l B a s e C o m p a r t m e n t o f A H i g h M a s t
BASIC WIND SPEED
I n d i a i s a v a s t c o u n t r y w i t h diverse climatic conditions.
Wind speed at various locations change as per the conditions.
B a s e d o n p a s t 5 0 y e a r s r e cord of basic wind speed, we
LEGEND
Basic Wind Speed
In m/s
55
50
47
p r o v i d e h i g h m a s t s t r u c t u r e s that sustains the basic wind
44
s p e e d o f t h e l o c a t i o n & h e a d loads.
39
33
Colour
Scheme
HIGH MAST
Globalization has had a profound impact on the way organizations and individuals conduct their business activities. The working times have
extended way beyond the normal business hours; even leisure activities tend to be extended well into the night. This quantum shift has spawned
the need for outdoor lighting which goes much beyond the realm of the conventional street lighting or the odd lattice structure lighting, for the
movement of both, men and material.
High mast lighting as a concept in area lighting is being preferred over conventional lighting, especially where large areas are to be illuminated
without the need for numerous lighting columns that, under certain circumstances, can be a hazard to movement. This is possible because the
high mast lighting system achieves very large space to height ratios.
High-mast lighting is ideal for many areas, particularly complicated or multi-level road systems, industrial or commercial areas, docks, airports,
stations, car parks and even some hazardous areas. All of these areas require the best possible lighting with minimum interference from the
installation itself combined with ease of maintenance.
Crompton Greaves with its pioneering position in the field of artificial illumination since last three decades is fully geared to meet the growing
need for high mast lighting. Equipped with a fully qualified team of experience professionals Crompton Greaves can successfully execute any high
mast lighting project, right from offering best illumination design schemes to supply of superior quality poles lamps and luminaires/accessories.
City planners, Architects, Engineers, Contractors and Consultants would definitely benefit from associating with Crompton Greaves.
FEATURES
M A S T
S T R U C T U R E
Our high mast is a continuously tapered, polygonal cross section of atleast 20 sides, presenting a good and pleasing appearance which is based
on proven in tension design conforming to the Technical report no.7 - 1996 of the Institution of Lighting Engineers. UK. to give an assured
performance and reliable service. The structure is suitable for loading as per IS 875 (part 3) 1987.
C O N S T R U C T I O N
High mast is fabricated from steel plates conforming to BS-EN 10025, cut and folded to form a polygonal section. Masts are in two sections for
16 & 20 Mtr and in three sections for 25 & 30 Mtr heights having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with
a fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange is fully developed to the
strength of the entire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimination of helical stress
concentration. For environmental protection of the mast, the entire fabricated mast is Hot Dip Galvanised (Single Dip)internally and externally,
having uniform coating thickness of 85 / 65 microns for bottom / top sections respectively.
D O O R
O P E N I N G
An adequate door opening is provided at the base of the mast. The opening is such that it permits clear access to equipments like winch, cable,
wire rope, plug & socket etc. and also facilitates easy removal of the winch for servicing. The door opening is complete with a close fitting vandal
resistant allen key locking with provision for external lock. The door opening is carefully designed and reinforced with adequate steel section so
that the mast section at the base is unaffected, and undue buckling of the cut portion is prevented under heavy wind condition.
D Y N A M I C
L O A D I NG
Our mast structure is designed to sustain an assumed maximum reaction arising from wind speed as per IS 875 (Part 3) 1987 (three seconds)
which is measured at a height of 10 mtrs above ground level. Our standard masts are suitable for a wind speed of 180 Kms/hour (50M/Sec) we
can also offer masts suitable for a wind speed of 225 Kms/hr (62.5 M/sec).
A C C E S S O R I E S
The high mast is provided with accessories as per customer requirements. Generally these include a raising and lowering system (R & L),
trailing cable, power tool, feeder pillar for automatic switching operation of luminaires, lighting finial and aviation obstruction warning light.
The R & L system will comprise of a double drum winch, SS wire ropes, head frame and lantern carriage. The winch is self lubricating and self
sustaining type. It does not require any brake or clutch and has a lifting capacity of SWL 750 Kgs.
The wire ropes are of stainless steel grade AISI316 with minimum 6mm diameter and 7/19 construction. It’s central core is also SS and have a
breaking strength of 2350Kgs.
The power tool is integral / external type suitable for handling the total head load. It has a mechanical torque limiter to ensure safety and also a
manual handle is provided. Suitable for use in open areas, airports, railway stations, road junctions, container yards etc.
A P P L I C A T I O N S
Road Junction • Car Parks
• Airports • Container Depots
• S e r v i c e Ya r d s S e c u r i t y
• R a i l w a y Ya r d s • S p o r t s S t a d i u m
• M o t o r w a y s • D o c k Ya r d s
• Lighting
•
HIGH MAST
Globalization has had a profound impact on the way organizations and individuals conduct their business activities. The working times have
extended way beyond the normal business hours; even leisure activities tend to be extended well into the night. This quantum shift has spawned
the need for outdoor lighting which goes much beyond the realm of the conventional street lighting or the odd lattice structure lighting, for the
movement of both, men and material.
High mast lighting as a concept in area lighting is being preferred over conventional lighting, especially where large areas are to be illuminated
without the need for numerous lighting columns that, under certain circumstances, can be a hazard to movement. This is possible because the
high mast lighting system achieves very large space to height ratios.
High-mast lighting is ideal for many areas, particularly complicated or multi-level road systems, industrial or commercial areas, docks, airports,
stations, car parks and even some hazardous areas. All of these areas require the best possible lighting with minimum interference from the
installation itself combined with ease of maintenance.
Crompton Greaves with its pioneering position in the field of artificial illumination since last three decades is fully geared to meet the growing
need for high mast lighting. Equipped with a fully qualified team of experience professionals Crompton Greaves can successfully execute any high
mast lighting project, right from offering best illumination design schemes to supply of superior quality poles lamps and luminaires/accessories.
City planners, Architects, Engineers, Contractors and Consultants would definitely benefit from associating with Crompton Greaves.
FEATURES
M A S T
S T R U C T U R E
Our high mast is a continuously tapered, polygonal cross section of atleast 20 sides, presenting a good and pleasing appearance which is based
on proven in tension design conforming to the Technical report no.7 - 1996 of the Institution of Lighting Engineers. UK. to give an assured
performance and reliable service. The structure is suitable for loading as per IS 875 (part 3) 1987.
C O N S T R U C T I O N
High mast is fabricated from steel plates conforming to BS-EN 10025, cut and folded to form a polygonal section. Masts are in two sections for
16 & 20 Mtr and in three sections for 25 & 30 Mtr heights having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with
a fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange is fully developed to the
strength of the entire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimination of helical stress
concentration. For environmental protection of the mast, the entire fabricated mast is Hot Dip Galvanised (Single Dip)internally and externally,
having uniform coating thickness of 85 / 65 microns for bottom / top sections respectively.
D O O R
O P E N I N G
An adequate door opening is provided at the base of the mast. The opening is such that it permits clear access to equipments like winch, cable,
wire rope, plug & socket etc. and also facilitates easy removal of the winch for servicing. The door opening is complete with a close fitting vandal
resistant allen key locking with provision for external lock. The door opening is carefully designed and reinforced with adequate steel section so
that the mast section at the base is unaffected, and undue buckling of the cut portion is prevented under heavy wind condition.
D Y N A M I C
L O A D I NG
Our mast structure is designed to sustain an assumed maximum reaction arising from wind speed as per IS 875 (Part 3) 1987 (three seconds)
which is measured at a height of 10 mtrs above ground level. Our standard masts are suitable for a wind speed of 180 Kms/hour (50M/Sec) we
can also offer masts suitable for a wind speed of 225 Kms/hr (62.5 M/sec).
A C C E S S O R I E S
The high mast is provided with accessories as per customer requirements. Generally these include a raising and lowering system (R & L),
trailing cable, power tool, feeder pillar for automatic switching operation of luminaires, lighting finial and aviation obstruction warning light.
The R & L system will comprise of a double drum winch, SS wire ropes, head frame and lantern carriage. The winch is self lubricating and self
sustaining type. It does not require any brake or clutch and has a lifting capacity of SWL 750 Kgs.
The wire ropes are of stainless steel grade AISI316 with minimum 6mm diameter and 7/19 construction. It’s central core is also SS and have a
breaking strength of 2350Kgs.
The power tool is integral / external type suitable for handling the total head load. It has a mechanical torque limiter to ensure safety and also a
manual handle is provided. Suitable for use in open areas, airports, railway stations, road junctions, container yards etc.
A P P L I C A T I O N S
Road Junction • Car Parks
• Airports • Container Depots
• S e r v i c e Ya r d s S e c u r i t y
• R a i l w a y Ya r d s • S p o r t s S t a d i u m
• M o t o r w a y s • D o c k Ya r d s
• Lighting
•
HIGHMAST AND ACCESSORIES
HIGHMAST STRUCTURE
Nominal height
of mast (mtrs.)
12.5 MTR
16 MTR
20 MTR
25 MTR
30 MTR
Catalogue No.
HM-11125
HM-1116 A
HM-1220
HM-1125
BSEN 10025
Material of
Construction
Normal
Thickness
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
Base Section - 3mm
Top Section - 3mm
Base Section - 4mm
Top Section - 3mm
Base Section - 4mm
Top Section - 3mm
Base Section - 4mm
Middle Section - 4mm
Top Section - 4mm
Base Section - 5mm
Middle Section - 4mm
Top Section - 4mm
Cross Section
of Mast
12 Sided Polygon
20 Sided Polygon
Length of
Individual Section
(Approx)
Base Section - 6.5 mtrs
Top Section - 6.5 mtrs
Base Section - 8.375 mtrs
Top Section - 8.375 mtrs
20 Sided Polygon
Base Section - 10.375 mtrs
Top Section - 10.375 mtrs
20 Sided Polygon
20 Sided Polygon
Base Section - 8.75 mtrs
Middle Section - 8.75 mtrs
Top Section - 8.75 mtrs
Base Section - 10.50 mtrs
Middle Section - 10.50 mtrs
Top Section - 10.50 mtrs
(Note: No circumferential weld is allowed
Base & Top
Diameter ( Approx.)
Base Dia - 350 mm
Top Dia - 150 mm
Base Dia - 350 mm
Top Dia - 150 mm
Base Dia - 460 mm
Top Dia - 150 mm
Base Dia - 485 mm
Top Dia - 150 mm
Base Dia - 600 mm
Top Dia - 150 mm
Size of Base Flange
Diameter & Thickness
( Approx.)
Diameter - 540 mm
Thickness - 25 mm
Diameter - 560 mm
Thickness - 25 mm
Diameter - 670 mm
Thickness - 25 mm
Diameter - 730 mm
Thickness - 32 mm
Diameter - 840 mm
Thickness - 32 mm
Details of Template
P. C. D. - 440 mm
P. C. D. - 460 mm
P. C. D. - 590 mm
P. C. D. - 660 mm
P. C. D. - 740 mm
No. of Foundation Bolt
6 Nos.
8 Nos.
12 Nos.
16 Nos.
16 Nos.
180 km/hr.
180 km/hr.
180 km/hr.
180 km/hr.
DYNAMIC LOADING
Max. Design
Wind Speed
180 km/hr.
LANTERN CARRIAGE
Diameter of Carriage
Ring (mm) Inc. Arms
2100 mm (Approx)
2400 mm (Approx)
2400 mm (Approx)
2400 mm (Approx)
2400 mm (Approx)
Number of Joints
2 Sections
2 Sections
2 Sections
3 Sections
3 Sections
Approx 350 kgs
Approx 500 kgs
Approx 750 kgs
Approx 750 kgs
Approx 750 kgs
6 Nos.
6 to 9 Nos.
9 to 12 Nos.
9 to 12 Nos.
9 to 12 Nos.
Load Carrying
Capacity
Number of
Luminaires
DOUBLE DRUM WINCH
Capacity
550 kgs
750 kgs
1500 kgs
1500 kgs
1500 kgs
Method of
Operation
Manual / Electrical
Manual / Electrical
Manual / Electrical
Manual / Electrical
Manual / Electrical
2 For winch
3 For Lantern Carriage
2 For winch
3 For Lantern Carriage
2 For winch
3 For Lantern Carriage
S TA I N L E S S S T E E L W I R E R O P E
2 For winch
2 For winch
Number of Ropes
3 For Lantern Carriage
3 For Lantern Carriage
6 mm
Diameter (mm)
Construction
7/19 with Central Core SS
6 mm
7/19 with Central Core SS
6 mm
7/19 with Central Core SS
6 mm
7/19 with Central Core SS
6 mm
7/19 with Central Core SS
POWER TOOL
Input Supply
440V 50 HZ
440V 50 HZ
440V 50 HZ
440V 50 HZ
440V 50 HZ
Wattage
0.75 KW
1.5 KW
1.5 KW
1.5 KW
1.5 KW
Reversible
Yes
Yes
Yes
Yes
Yes
TORQUE LIMITER
Type
Mechanical
Mechanical
Mechanical
Mechanical
Mechanical
Standard essential accessories offered with high masts.
Mastshaft, head frame with pullies lantern carriage, luminaire mounting arms (6 nos), ‘u’ bolts, lighting finial, stainless steel wire ropes
93 nos for lantern carriage + 2 nos for winch.) transiet plate, double drum winch, power tool, winch & power tool mounting bracket,
foundation bolts & nuts, anchor & tem – plate top junction box & gls type aviation light.
Optional item.
• Neon type aviation light, led type aviation light.
• Feeder piller
Technical compliance
CGL masts comply to technical report no. 7 of U.K.
HIGHMAST AND ACCESSORIES
HIGHMAST STRUCTURE
Nominal height
of mast (mtrs.)
12.5 MTR
16 MTR
20 MTR
25 MTR
30 MTR
Catalogue No.
HM-11125
HM-1116 A
HM-1220
HM-1125
BSEN 10025
Material of
Construction
Normal
Thickness
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
Base Section - 3mm
Top Section - 3mm
Base Section - 4mm
Top Section - 3mm
Base Section - 4mm
Top Section - 3mm
Base Section - 4mm
Middle Section - 4mm
Top Section - 4mm
Base Section - 5mm
Middle Section - 4mm
Top Section - 4mm
Cross Section
of Mast
12 Sided Polygon
20 Sided Polygon
Length of
Individual Section
(Approx)
Base Section - 6.5 mtrs
Top Section - 6.5 mtrs
Base Section - 8.375 mtrs
Top Section - 8.375 mtrs
20 Sided Polygon
Base Section - 10.375 mtrs
Top Section - 10.375 mtrs
20 Sided Polygon
20 Sided Polygon
Base Section - 8.75 mtrs
Middle Section - 8.75 mtrs
Top Section - 8.75 mtrs
Base Section - 10.50 mtrs
Middle Section - 10.50 mtrs
Top Section - 10.50 mtrs
(Note: No circumferential weld is allowed
Base & Top
Diameter ( Approx.)
Base Dia - 350 mm
Top Dia - 150 mm
Base Dia - 350 mm
Top Dia - 150 mm
Base Dia - 460 mm
Top Dia - 150 mm
Base Dia - 485 mm
Top Dia - 150 mm
Base Dia - 600 mm
Top Dia - 150 mm
Size of Base Flange
Diameter & Thickness
( Approx.)
Diameter - 540 mm
Thickness - 25 mm
Diameter - 560 mm
Thickness - 25 mm
Diameter - 670 mm
Thickness - 25 mm
Diameter - 730 mm
Thickness - 32 mm
Diameter - 840 mm
Thickness - 32 mm
Details of Template
P. C. D. - 440 mm
P. C. D. - 460 mm
P. C. D. - 590 mm
P. C. D. - 660 mm
P. C. D. - 740 mm
No. of Foundation Bolt
6 Nos.
8 Nos.
12 Nos.
16 Nos.
16 Nos.
180 km/hr.
180 km/hr.
180 km/hr.
180 km/hr.
DYNAMIC LOADING
Max. Design
Wind Speed
180 km/hr.
LANTERN CARRIAGE
Diameter of Carriage
Ring (mm) Inc. Arms
2100 mm (Approx)
2400 mm (Approx)
2400 mm (Approx)
2400 mm (Approx)
2400 mm (Approx)
Number of Joints
2 Sections
2 Sections
2 Sections
3 Sections
3 Sections
Approx 350 kgs
Approx 500 kgs
Approx 750 kgs
Approx 750 kgs
Approx 750 kgs
6 Nos.
6 to 9 Nos.
9 to 12 Nos.
9 to 12 Nos.
9 to 12 Nos.
Load Carrying
Capacity
Number of
Luminaires
DOUBLE DRUM WINCH
Capacity
550 kgs
750 kgs
1500 kgs
1500 kgs
1500 kgs
Method of
Operation
Manual / Electrical
Manual / Electrical
Manual / Electrical
Manual / Electrical
Manual / Electrical
2 For winch
3 For Lantern Carriage
2 For winch
3 For Lantern Carriage
2 For winch
3 For Lantern Carriage
S TA I N L E S S S T E E L W I R E R O P E
2 For winch
2 For winch
Number of Ropes
3 For Lantern Carriage
3 For Lantern Carriage
6 mm
Diameter (mm)
Construction
7/19 with Central Core SS
6 mm
7/19 with Central Core SS
6 mm
7/19 with Central Core SS
6 mm
7/19 with Central Core SS
6 mm
7/19 with Central Core SS
POWER TOOL
Input Supply
440V 50 HZ
440V 50 HZ
440V 50 HZ
440V 50 HZ
440V 50 HZ
Wattage
0.75 KW
1.5 KW
1.5 KW
1.5 KW
1.5 KW
Reversible
Yes
Yes
Yes
Yes
Yes
TORQUE LIMITER
Type
Mechanical
Mechanical
Mechanical
Mechanical
Mechanical
Standard essential accessories offered with high masts.
Mastshaft, head frame with pullies lantern carriage, luminaire mounting arms (6 nos), ‘u’ bolts, lighting finial, stainless steel wire ropes
93 nos for lantern carriage + 2 nos for winch.) transiet plate, double drum winch, power tool, winch & power tool mounting bracket,
foundation bolts & nuts, anchor & tem – plate top junction box & gls type aviation light.
Optional item.
• Neon type aviation light, led type aviation light.
• Feeder piller
Technical compliance
CGL masts comply to technical report no. 7 of U.K.
STREET LIGHTING POLES
With the passage of time the concept of Street lights have under gone a major transformation. From being merely functional elements satisfying illumination requirements during the night time, it now doubles up as street furniture during the day time. The street lighting poles are also contributing immensely to the beauty and
character of the changing cityscape. To reduce the clutter on the streets the street lighting poles, today, are also being designed for various street functions such as,
traffic signs, street names, advertisement banners, CCTV cameras etc.
Crompton Greaves has endeavoured to make the city roads and highways beautiful by introducing a whole new range of street poles and mounting brackets. City
planners, civic authorities, engineers, contractors and consultants would find these to be appealing long term solution for well illuminated and congestion free streets
FEATURES
CGL offers a wide variety of Hot Dip Galvanised Octogonal poles with a study base plate. Our octagonal poles have a galvanising thickness of 80 microns (internally
and externally). This protective coating ensures long life of the product and does not require periodic painting. Octagonal poles by CGL have a distinct edge over
conventional round stepped-swedged welded poles.
• Hot dip galvanized (80 microns) internally and externally.
• Sleek, elegant and pleasing aesthetics. with flushed door.
• bracket design as per cistomer requirments. (on request at extra cost)
• Ease of maintenance.
• Does not rquire periodic painting.
• Long life. (Estimated life is 15 to 20 years)
MOUNTING BRACKET
Crompton Greaves can supply galvanised arm brackets along with spigots matching with diffrent types of poles and as per customer requirments. Typical
arrangement and dimensional details for single arm and double arm bracket along with spigot suitable for different types of poles given below.
STREET POLES
T E C H N I C A L D ATA S P E C I F I C AT I O N S
Octagonal Hot Galvanized Street Light Poles
Pole Height (Mtrs.)
5 Mtrs
7 Mtrs
9 Mtrs
9 Mtrs
10 Mtrs
11 Mtrs
12 Mtrs
Cat. No.
HM 1105 P
HM 1107 P
HM 1109 PA
HM 1109 PB
HM 1110 P
HM 1111 P
HM 1112 P
Material of
Construction
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
Thickness of
Base Plate
16 mm
16 mm
20 mm
20 mm
20 mm
20 mm
25 mm
Bottom Dia.
135 mm
150 mm
150 mm
200 mm
200 mm
200 mm
240 mm
Top Dia.
65 mm
75 mm
75 mm
100 mm
100 mm
100 mm
110 mm
Number of
Foundation Bolts
4
4
4
4
4
4
4
PCD of Foundation
Bolt
210 x 210 mm
240 x 240 mm
240 x 240 mm
310 x 310 mm
310 x 310 mm
310 x 310 mm
350 x 350 mm
Bolt Dia.
16 mm
16 mm
20 mm
20 mm
20 mm
25 mm
25 mm
Metal Protection
Treatment
Thickness of
Galvanisation
Thickness of
Sheet
Above products are available with single & double arm luminaire mounting brackets.
S t a n d a r d e s s e n t i a l a c c e s s o r i e s o f f e r e d w ith street light pole s.
•
Foundation bolts, anchor plate & tem-plate
A P P L I C A T I O N S
•
•
•
•
•
Street Lighting
Open area Lighting
Ya r d L i g h t i n g
Periphery Lighting
Signage Lighting
STREET LIGHTING POLES
With the passage of time the concept of Street lights have under gone a major transformation. From being merely functional elements satisfying illumination requirements during the night time, it now doubles up as street furniture during the day time. The street lighting poles are also contributing immensely to the beauty and
character of the changing cityscape. To reduce the clutter on the streets the street lighting poles, today, are also being designed for various street functions such as,
traffic signs, street names, advertisement banners, CCTV cameras etc.
Crompton Greaves has endeavoured to make the city roads and highways beautiful by introducing a whole new range of street poles and mounting brackets. City
planners, civic authorities, engineers, contractors and consultants would find these to be appealing long term solution for well illuminated and congestion free streets
FEATURES
CGL offers a wide variety of Hot Dip Galvanised Octogonal poles with a study base plate. Our octagonal poles have a galvanising thickness of 80 microns (internally
and externally). This protective coating ensures long life of the product and does not require periodic painting. Octagonal poles by CGL have a distinct edge over
conventional round stepped-swedged welded poles.
• Hot dip galvanized (80 microns) internally and externally.
• Sleek, elegant and pleasing aesthetics. with flushed door.
• bracket design as per cistomer requirments. (on request at extra cost)
• Ease of maintenance.
• Does not rquire periodic painting.
• Long life. (Estimated life is 15 to 20 years)
MOUNTING BRACKET
Crompton Greaves can supply galvanised arm brackets along with spigots matching with diffrent types of poles and as per customer requirments. Typical
arrangement and dimensional details for single arm and double arm bracket along with spigot suitable for different types of poles given below.
STREET POLES
T E C H N I C A L D ATA S P E C I F I C AT I O N S
Octagonal Hot Galvanized Street Light Poles
Pole Height (Mtrs.)
5 Mtrs
7 Mtrs
9 Mtrs
9 Mtrs
10 Mtrs
11 Mtrs
12 Mtrs
Cat. No.
HM 1105 P
HM 1107 P
HM 1109 PA
HM 1109 PB
HM 1110 P
HM 1111 P
HM 1112 P
Material of
Construction
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
Thickness of
Base Plate
16 mm
16 mm
20 mm
20 mm
20 mm
20 mm
25 mm
Bottom Dia.
135 mm
150 mm
150 mm
200 mm
200 mm
200 mm
240 mm
Top Dia.
65 mm
75 mm
75 mm
100 mm
100 mm
100 mm
110 mm
Number of
Foundation Bolts
4
4
4
4
4
4
4
PCD of Foundation
Bolt
210 x 210 mm
240 x 240 mm
240 x 240 mm
310 x 310 mm
310 x 310 mm
310 x 310 mm
350 x 350 mm
Bolt Dia.
16 mm
16 mm
20 mm
20 mm
20 mm
25 mm
25 mm
Metal Protection
Treatment
Thickness of
Galvanisation
Thickness of
Sheet
Above products are available with single & double arm luminaire mounting brackets.
S t a n d a r d e s s e n t i a l a c c e s s o r i e s o f f e r e d w ith street light pole s.
•
Foundation bolts, anchor plate & tem-plate
A P P L I C A T I O N S
•
•
•
•
•
Street Lighting
Open area Lighting
Ya r d L i g h t i n g
Periphery Lighting
Signage Lighting
STREET LIGHTING POLES
With the passage of time the concept of Street lights have under gone a major transformation. From being merely functional elements satisfying illumination requirements during the night time, it now doubles up as street furniture during the day time. The street lighting poles are also contributing immensely to the beauty and
character of the changing cityscape. To reduce the clutter on the streets the street lighting poles, today, are also being designed for various street functions such as,
traffic signs, street names, advertisement banners, CCTV cameras etc.
Crompton Greaves has endeavoured to make the city roads and highways beautiful by introducing a whole new range of street poles and mounting brackets. City
planners, civic authorities, engineers, contractors and consultants would find these to be appealing long term solution for well illuminated and congestion free streets
FEATURES
CGL offers a wide variety of Hot Dip Galvanised Octogonal poles with a study base plate. Our octagonal poles have a galvanising thickness of 80 microns (internally
and externally). This protective coating ensures long life of the product and does not require periodic painting. Octagonal poles by CGL have a distinct edge over
conventional round stepped-swedged welded poles.
• Hot dip galvanized (80 microns) internally and externally.
• Sleek, elegant and pleasing aesthetics. with flushed door.
• bracket design as per cistomer requirments. (on request at extra cost)
• Ease of maintenance.
• Does not rquire periodic painting.
• Long life. (Estimated life is 15 to 20 years)
MOUNTING BRACKET
Crompton Greaves can supply galvanised arm brackets along with spigots matching with diffrent types of poles and as per customer requirments. Typical
arrangement and dimensional details for single arm and double arm bracket along with spigot suitable for different types of poles given below.
STREET POLES
T E C H N I C A L D ATA S P E C I F I C AT I O N S
Octagonal Hot Galvanized Street Light Poles
Pole Height (Mtrs.)
5 Mtrs
7 Mtrs
9 Mtrs
9 Mtrs
10 Mtrs
11 Mtrs
12 Mtrs
Cat. No.
HM 1105 P
HM 1107 P
HM 1109 PA
HM 1109 PB
HM 1110 P
HM 1111 P
HM 1112 P
Material of
Construction
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
BSEN 10025
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
H.D.Galvanised
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
65 Microns
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
Thickness of
Base Plate
16 mm
16 mm
20 mm
20 mm
20 mm
20 mm
25 mm
Bottom Dia.
135 mm
150 mm
150 mm
200 mm
200 mm
200 mm
240 mm
Top Dia.
65 mm
75 mm
75 mm
100 mm
100 mm
100 mm
110 mm
Number of
Foundation Bolts
4
4
4
4
4
4
4
PCD of Foundation
Bolt
210 x 210 mm
240 x 240 mm
240 x 240 mm
310 x 310 mm
310 x 310 mm
310 x 310 mm
350 x 350 mm
Bolt Dia.
16 mm
16 mm
20 mm
20 mm
20 mm
25 mm
25 mm
Metal Protection
Treatment
Thickness of
Galvanisation
Thickness of
Sheet
Above products are available with single & double arm luminaire mounting brackets.
S t a n d a r d e s s e n t i a l a c c e s s o r i e s o f f e r e d w ith street light pole s.
•
Foundation bolts, anchor plate & tem-plate
APPLICATIONS
•
•
•
•
•
Street Lighting
Open area Lighting
Ya r d L i g h t i n g
Periphery Lighting
Signage Lighting
Floodlight Luminaires
For High Mast Lighting
INTERGRAL
IP65
Lamp
No
Voltage
(V)
Current
(A)
Approx
Wt (Kgs)
Cat Ref.
Type
FAI40IH
HPSV-T
1
400
240/220 2x3.0/2x4.3
12.25
FAI40IH/MH
MH-T
1
400
240/220 2x3.0/2x4.3
12.25
Watts
IP65
FAI1125IH
HPSV-T
1
250
240
1.34
9.6
FAI1125IH/MH
MH-T
1
250
240
1.34
9.6
NON-INTERGRAL
IP55
FBD1525/40
HPSV-E/T
1
250/400
240
3.0/4.3
6.15
FBD1525/40
MH-T
1
250/400
240
3.0/4.3
6.15
FGP1118
HPSV-E/T
1
250/400
240
3.0/4.3
3.3
FGP1118
MH-E/T
1
250/400
240
3.0/4.3
3.3
FAD1314
HPSV-T
1
250/400
240
3.0/4.3
3.35
FAD1314
MH-T
1
250/400
240
3.0/4.3
3.35
FHD1524
HPSV-T
2
250
240
2x3.0
7.0
FHD1524
HPSV-T
2
250
240
2x4.0
7.0
IP54
IP65
IP65
IP65
FHD1424
HPSV-T
2
250/400
240
2x3.0/2x4.3
7.65
FHD1424
MH-T
2
250/400
240
3.0/4.3
7.65
IP65
FAD1414
MH-T
1
250/400
240
3.0/4.3
4.8
TH
1
1000
240
4.16
1.7
IP65
TH7
All above luminaires (except TH7) to be used with appropriate control gear box, available in deep drawn as well as cast aluminium versions.
Floodlight Luminaires
For High Mast Lighting
INTERGRAL
IP65
Lamp
No
Voltage
(V)
Current
(A)
Approx
Wt (Kgs)
Cat Ref.
Type
FAI40IH
HPSV-T
1
400
240/220 2x3.0/2x4.3
12.25
FAI40IH/MH
MH-T
1
400
240/220 2x3.0/2x4.3
12.25
Watts
IP65
FAI1125IH
HPSV-T
1
250
240
1.34
9.6
FAI1125IH/MH
MH-T
1
250
240
1.34
9.6
NON-INTERGRAL
IP55
FBD1525/40
HPSV-E/T
1
250/400
240
3.0/4.3
6.15
FBD1525/40
MH-T
1
250/400
240
3.0/4.3
6.15
FGP1118
HPSV-E/T
1
250/400
240
3.0/4.3
3.3
FGP1118
MH-E/T
1
250/400
240
3.0/4.3
3.3
FAD1314
HPSV-T
1
250/400
240
3.0/4.3
3.35
FAD1314
MH-T
1
250/400
240
3.0/4.3
3.35
FHD1524
HPSV-T
2
250
240
2x3.0
7.0
FHD1524
HPSV-T
2
250
240
2x4.0
7.0
IP54
IP65
IP65
IP65
FHD1424
HPSV-T
2
250/400
240
2x3.0/2x4.3
7.65
FHD1424
MH-T
2
250/400
240
3.0/4.3
7.65
IP65
FAD1414
MH-T
1
250/400
240
3.0/4.3
4.8
TH
1
1000
240
4.16
1.7
IP65
TH7
All above luminaires (except TH7) to be used with appropriate control gear box, available in deep drawn as well as cast aluminium versions.
Floodlight Controlgear Box
For High Mast Lighting
CAST
ALUMINIUM
CONTROLGEAR
BOX
IP54
Lamp
No
Watts
Voltage
(V)
Current
(A)
1
250
240/220/200
1.32
255
204
115
5.4
2
HPMV
1
400
240/220/200
2.13
255
204
115
6.4
2
HPSV
1
150
240/220
0.74
255
204
115
5.4
2
CG1225S
HPSV
1
250
240/220
1.30
255
204
115
6.4
2
CG1215MH
MH
1
150
240/220
0.74
255
204
115
5.4
2
CG1225MH
MH
1
250
240/220
1.30
255
204
115
6.4
2
CG1340S
HPSV
1
400
240/220
2.10
255
204
115
7.5
2
REGIONAL HEAD QUARTERS / BRANCHES
CG1340MH
MH
1
400
240/220
2.10
255
204
115
7.5
2
Sales Offices
Cat Ref.
Type
CG1225M
HPMV
CG1240M
CG1215S
Dimension (mm) Approx
Case
A
B
C Wt (Kgs) Lot (Nos)
IP55
CG291KMH(CA)
MH
1
1000
240/220
5.0
266
266
167
15.5
1
CG291KS(CA)
HPSV
1
1000
240/220
5.0
266
266
167
15.5
1
IP55
CG12225S(CA)
HPSV
2
250
240/220
2.60
347
317
110
11.0
1
CG12240S(CA)
HPSV
2
400
240/220
4.20
347
317
110
14.0
CG12225MH(CA)
MH
2
250
240/220
2.60
347
317
110
11.0
1
1
CG12240MH(CA)
MH
2
400
240/220
4.20
347
317
110
14.0
1
IP65
CG1325M(CA)
HPMV
1
250
240/220/200
1.32
244
180
106
3.88
2
CG1340M(CA)
HPMV
1
400
240/220/200
2.13
244
180
106
4.90
CG1325S(CA)
HPSV
1
250
240/220
1.30
244
180
106
4.90
2
2
CG1325MH(CA)
MH
1
250
240/220
1.3
244
180
106
4.9
2
IP55
CG1240S(CA)
HPSV
1
400
240/220
2.10
260
208
106
7.4
2
CG1240MH(CA)
MH
1
400
240/220
2.10
260
208
106
7.4
2
All above luminaires control gear box, available in deep drawn as well as cast aluminium versions.
NORTHERN REGION
New Delhi : Vandana, 11,Tolstoy Marg, New Delhi - 110 001.
Jaipur : Church Road P.B. No. 173, Jaipur - 302 001.
Jalandar : B XII - 407, 2nd Floor, Ladowali Road, Nr. BSF Chowk, Jalandar - 144 001.
Lucknow : 3rd Floor, Saran Chamber-II, 5-Park Road, Lucknow - 226 001.
Tel No.
(011) 30416300, 30416319
(0141) 301800, 301824
(0181) 3240990, 3240991
(0522) 3018852, 3018869
Fax No.
23324360
2365371
2226342
2237009
(033) 22829681-22829685,22829942
(0612) 2212751
(0674) 2531277, 2533647
22994218
2229531
2533521
(0361) 2605132, 2543830
(0651) 2281187
2521126
2473473
2281187
Tel No.
(022)67558622,67558598
(079)26587238,26587328,26582780
(0731)2498269, 2498276
Fax No
25795158
26586047
5065621
(0712)2531271,2560870
(0265)2332460, 2332227
2537196
2332458
(020)25534675,25534677
25534684
(044)42247500,55247510
28231973
(080)41391908,41391909
41391900
(0484)2370860, 2370863
2373728
(040)40002300,40002308
(0422)2521829,2521830
40002340
2525334
(0452) 2667771
2667772
REGISTERED OFFICE
CG House, 6th Floor, Dr. Annie Basant Road, Worli, Mumbai-400 030
(022) 24382211/77
24237788
LIGHTING DIVISION-SURVEILLANCE BUSINESS GROUP
Kanjurmarg (East), Bhandup, Mumbai-400 042. (Maharashtra)INDIA
(022)67558697,67558448,67558000
25787283
EASTERN REGION
Kolkata : 50, Chowringhee Road, Kolkata - 700 071.
Patna : Sahayagi Marg, Exhibition Road, Patna-800 001.
Bhubaneshwar : Janpath Tower, 3rd Floor, Ashok Nagar, Unit II,
Bhubaneshwar - 751 009.
Guwahati : C/o. Zenith Drugs & Allied Agencies (P) Ltd., 533,
K.C.Chaudhury Road, Satribari, Guwahati - 781 008
Ranchi : C/o. Ess Ess Agencies, Uphar Cinema Campus,Ratu Road,
Ranchi - 854005.
WESTERN REGION
Mumbai : Crompton Greaves Ltd. Kanjurmarg (East), Mumbai - 400 042.
Ahemdabad : 909, Sakar-II, Near Ellisbridge Police Stn. Ahemdabad-380 036.
Indore : 103-B, Apollo Trade Centre, 2-B, Rajgarh Kothi,
Mumbai-Agra Road, Indore - 452 001.
Nagpur : 3, West High Court, Dharam Peth, Nagpur - 440 010. (Satellite Off.)
Baroda : 10A, Vrundan Colony, Near Hari nagar Water Tank, Gotri Road,
Baroda - 390 007.
Pune : Premium Point Building, 4th Floor, J.M. Road, Shivaji Nagar,
Pune - 411 005.
SOUTHERN REGION
Chennai : 3A, Kodambakkam High Road, P.B.No. 3316, Nungambakkam,
Chennai - 600 034.
Bangalore : 1st Floor, Janardhan Towers, 562/640, Bannerghatta Main Road,
Bilekahalli, Bangalore-560 076.
Cochin : Cherupushpam building, 5th Floor,300-6, Shanmugham Road,
Ernakulum, Cochin-682 031
Secunderabad : Minerva Complex, 94, Sarojinidevi Road, Secunderabad-500 003.
Coimbatore : 658/664, RajLaxmi Plaza, 100 Feet Road, Gandhipuram,
Coimbature-641 037 (Satellite Off.)
Madurai : 2/3, Mangayakarsi Women’s College Road, Paravai,
Madurai-625 402. (Satellite Off.)
email : [email protected] website : www.cglonline.com
Floodlight Controlgear Box
For High Mast Lighting
CAST
ALUMINIUM
CONTROLGEAR
BOX
IP54
Lamp
No
Watts
Voltage
(V)
Current
(A)
1
250
240/220/200
1.32
255
204
115
5.4
2
HPMV
1
400
240/220/200
2.13
255
204
115
6.4
2
HPSV
1
150
240/220
0.74
255
204
115
5.4
2
CG1225S
HPSV
1
250
240/220
1.30
255
204
115
6.4
2
CG1215MH
MH
1
150
240/220
0.74
255
204
115
5.4
2
CG1225MH
MH
1
250
240/220
1.30
255
204
115
6.4
2
CG1340S
HPSV
1
400
240/220
2.10
255
204
115
7.5
2
REGIONAL HEAD QUARTERS / BRANCHES
CG1340MH
MH
1
400
240/220
2.10
255
204
115
7.5
2
Sales Offices
Cat Ref.
Type
CG1225M
HPMV
CG1240M
CG1215S
Dimension (mm) Approx
Case
A
B
C Wt (Kgs) Lot (Nos)
IP55
CG291KMH(CA)
MH
1
1000
240/220
5.0
266
266
167
15.5
1
CG291KS(CA)
HPSV
1
1000
240/220
5.0
266
266
167
15.5
1
IP55
CG12225S(CA)
HPSV
2
250
240/220
2.60
347
317
110
11.0
1
CG12240S(CA)
HPSV
2
400
240/220
4.20
347
317
110
14.0
CG12225MH(CA)
MH
2
250
240/220
2.60
347
317
110
11.0
1
1
CG12240MH(CA)
MH
2
400
240/220
4.20
347
317
110
14.0
1
IP65
CG1325M(CA)
HPMV
1
250
240/220/200
1.32
244
180
106
3.88
2
CG1340M(CA)
HPMV
1
400
240/220/200
2.13
244
180
106
4.90
CG1325S(CA)
HPSV
1
250
240/220
1.30
244
180
106
4.90
2
2
CG1325MH(CA)
MH
1
250
240/220
1.3
244
180
106
4.9
2
IP55
CG1240S(CA)
HPSV
1
400
240/220
2.10
260
208
106
7.4
2
CG1240MH(CA)
MH
1
400
240/220
2.10
260
208
106
7.4
2
All above luminaires control gear box, available in deep drawn as well as cast aluminium versions.
NORTHERN REGION
New Delhi : Vandana, 11,Tolstoy Marg, New Delhi - 110 001.
Jaipur : Church Road P.B. No. 173, Jaipur - 302 001.
Jalandar : B XII - 407, 2nd Floor, Ladowali Road, Nr. BSF Chowk, Jalandar - 144 001.
Lucknow : 3rd Floor, Saran Chamber-II, 5-Park Road, Lucknow - 226 001.
Tel No.
(011) 30416300, 30416319
(0141) 301800, 301824
(0181) 3240990, 3240991
(0522) 3018852, 3018869
Fax No.
23324360
2365371
2226342
2237009
(033) 22829681-22829685,22829942
(0612) 2212751
(0674) 2531277, 2533647
22994218
2229531
2533521
(0361) 2605132, 2543830
(0651) 2281187
2521126
2473473
2281187
Tel No.
(022)67558622,67558598
(079)26587238,26587328,26582780
(0731)2498269, 2498276
Fax No
25795158
26586047
5065621
(0712)2531271,2560870
(0265)2332460, 2332227
2537196
2332458
(020)25534675,25534677
25534684
(044)42247500,55247510
28231973
(080)41391908,41391909
41391900
(0484)2370860, 2370863
2373728
(040)40002300,40002308
(0422)2521829,2521830
40002340
2525334
(0452) 2667771
2667772
REGISTERED OFFICE
CG House, 6th Floor, Dr. Annie Basant Road, Worli, Mumbai-400 030
(022) 24382211/77
24237788
LIGHTING DIVISION-SURVEILLANCE BUSINESS GROUP
Kanjurmarg (East), Bhandup, Mumbai-400 042. (Maharashtra)INDIA
(022)67558697,67558448,67558000
25787283
EASTERN REGION
Kolkata : 50, Chowringhee Road, Kolkata - 700 071.
Patna : Sahayagi Marg, Exhibition Road, Patna-800 001.
Bhubaneshwar : Janpath Tower, 3rd Floor, Ashok Nagar, Unit II,
Bhubaneshwar - 751 009.
Guwahati : C/o. Zenith Drugs & Allied Agencies (P) Ltd., 533,
K.C.Chaudhury Road, Satribari, Guwahati - 781 008
Ranchi : C/o. Ess Ess Agencies, Uphar Cinema Campus,Ratu Road,
Ranchi - 854005.
WESTERN REGION
Mumbai : Crompton Greaves Ltd. Kanjurmarg (East), Mumbai - 400 042.
Ahemdabad : 909, Sakar-II, Near Ellisbridge Police Stn. Ahemdabad-380 036.
Indore : 103-B, Apollo Trade Centre, 2-B, Rajgarh Kothi,
Mumbai-Agra Road, Indore - 452 001.
Nagpur : 3, West High Court, Dharam Peth, Nagpur - 440 010. (Satellite Off.)
Baroda : 10A, Vrundan Colony, Near Hari nagar Water Tank, Gotri Road,
Baroda - 390 007.
Pune : Premium Point Building, 4th Floor, J.M. Road, Shivaji Nagar,
Pune - 411 005.
SOUTHERN REGION
Chennai : 3A, Kodambakkam High Road, P.B.No. 3316, Nungambakkam,
Chennai - 600 034.
Bangalore : 1st Floor, Janardhan Towers, 562/640, Bannerghatta Main Road,
Bilekahalli, Bangalore-560 076.
Cochin : Cherupushpam building, 5th Floor,300-6, Shanmugham Road,
Ernakulum, Cochin-682 031
Secunderabad : Minerva Complex, 94, Sarojinidevi Road, Secunderabad-500 003.
Coimbatore : 658/664, RajLaxmi Plaza, 100 Feet Road, Gandhipuram,
Coimbature-641 037 (Satellite Off.)
Madurai : 2/3, Mangayakarsi Women’s College Road, Paravai,
Madurai-625 402. (Satellite Off.)
email : [email protected] website : www.cglonline.com
HIGHMASTS
&
STREET LIGHTING
POLES