®
Item # ______________________________________________
®
HD SUPER™
WORK CENTER WITH OVERHEAD
• Organize Work Areas: HD Super™ Work Center with
overhead structure helps organize work areas, keeping
the work surface neat and clutter-free.
• Saves Steps, Time: Overhead accessories provide a
place for spices, pots and pans and utensils, so they are
always within easy reach.
• Choice of Three Overhead Accessories:
Cantilever Shelf — 12" (305mm) wide wire shelf holds
cooking utensils, ingredients, etc.
Spice Rack — wire rack keeps spices handy.
Hook — attaches to the edge of the other accessories to
hold pots, pans, utensils, etc.
• Arrange Accessories to Suit Needs: The cantilever
shelf and the spice rack can be placed at any level
above the table top, and can be adjusted as needed in
two-inch increments. They can be arranged in any
combination and number along the 88" (2235mm) high
HD Super™ back posts
• Unique Sanitary Seal Around Back Posts: The 88"
(2235mm) high back posts extend up through holes in
the table, which is embossed at 3/8" (12mm) around the
holes. A seal at the top of the embossment creates a
watertight seal between the posts and the table,
preventing food particles and liquids from entering
the holes.
• Heavy-Duty: HD Super™ Work Centers are designed
and built for heavy-duty foodservice and food
processing applications. The 34" (864mm) high work
surface is made of seamless, 14-gauge stainless steel
with a support structure that virtually eliminates any
“drumming” effect.
Work Center with Overhead
Job ________________________________________________
Work Center with Cantilever Shelf
and Spice Rack Accessories
• Greater Rigidity: Work Centers feature sturdy 15/8"
(38mm) diameter HD Super™ posts and the tapered
sleeves and corners of patented Super Erecta Shelf ®
construction.
These two features assure a rigid, wobble-free table.
• Easy to Assemble: Units are shipped knocked down
and can be put together in minutes without special tools.
®
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
17.26
• Several Styles Available: HD Super™ Work Centers with
overhead structure come in 12 models, all with stainless
steel table tops, but offering a choice of chrome-plated
or stainless steel posts and either a shelf or a threesided frame which can be placed at the desired level
below the top. (NSF requires that shelves be placed at
least 6", 152.4mm above the floor.) Additional shelves
can be ordered from HD Super™ stock
Copyright © 1999 InterMetro Industries Corp.
17.26
Job ________________________________________________
®
WORK CENTER WITH OVERHEAD
Specifications:
• Top: Seamless 14-gauge T-304 stainless
steel, embossed at 3/8" (12mm) around
holes for posts, neoprene-sealed at top of
embossment. 14-gauge (.075) channel
support structure is nickel/chrome-plated
after fabrication.
(610 x 1370mm) bottom frames; 30" x 72"
(760 x 1825mm) and 30" x 96" (760 x
2439mm) work centers have 24" x 60"
(610 x 1525mm) bottom frames.
• Bottom Shelf: 16-gauge galvanized or
T-304 stainless steel.
14-gauge available on special order. 30" x
60" (760 x 1525mm) work centers have
24" x 54" (610 x 1370mm) bottom shelves;
30" x 72" (760 x 1825mm) and 30" x 96"
(760 x 2439mm) work centers have 24" x
60" (610 x 1525mm) bottom shelves.
• Shelf and Spice Rack: Open wire
construction, with tapered corners that fit
over tapered split sleeves on 15/8"
(38mm) diameter HD Super™ posts.
Available in stainless steel or chromeplated.
Spice Rack
• Other Accessories: See data sheet
#17.22 for cutting board holder and
drawers.
Hook
Dimensions
Width
(in)
(mnm)
Length
(in.) (mm)
30
30
30
30
30
30
30
30
30
60
72
96
60
72
96
60
72
96
Overall
Height
(in.)
(mm)
881/4
881/4
881/4
881/16
881/16
881/16
881/4
881/4
881/4
1525
1825
2439
1525
1825
2439
1525
1825
2439
2242
2242
2242
2237
2237
2237
2242
2242
2242
Approx.
Pkd. Wt.
(lbs.)
(kg)
Post
Material
Bottom
Shelf
Material
Bottom
Frame
Material
Cat. No.
158
182
234
160
184
236
137
160
212
SS
SS
SS
Chrome
Chrome
Chrome
SS
SS
SS
SS
SS
SS
Galvanized
Galvanized
Galvanized
—
—
—
—
—
—
—
—
—
SS
SS
SS
WTC306FS
WTC307FS
WTC309FS
WTC306FC
WTC307FC
WTC309FC
WTC306US
WTC307US
WTC309US
72
83
106
73
83
107
62
73
96
LOAD RATING FOR OVERHEAD: 300 lbs. (136 Kg.) maximum.
LOAD RATING FOR TOP: 3060–625 lbs. (283 kg.); 3072–750 lbs. (340 kg.); 3096–1000 lbs. (454 kg.) equally distributed.
Accessories
Spice Rack
Inside Height
(in.)
(mm)
Fits Units
15
60" (1525mm) long
72" (1825mm) long &
96" (2439mm) long
Inside Depth
(in.)
(mm)
3
Inside Length
(in.)
(mm)
9
Approx. Pkd. Wt.
(lbs.)
(kg)
Cat. No.
Chrome-Plated
Cat. No.
Stainless
1 /16
49.2
4 /8
111
51 /16
1310
7.7
3.5
654SRC
654SRS
115/16
49.2
43/8
111
579/16
1462
8.3
3.75
660SRC
660SRS
Cantilever Shelf
Fits Units
(in.)
Width
(mm)
60" (1525mm) long
72" (1825mm) long &
96" (2439mm) long
12
Length
(in.)
(mm)
Approx. Pkd. Wt.
(lbs.)
(kg)
12
Cat. No.
Chrome-Plated
Cat. No.
Stainless
43
54
1370
11.8
5.4
1254CHC
1254CHS
43
60
1525
12.7
5.8
1260CHC
1260CHS
LOAD RATING: 150 lbs. (68 kg.) equally distributed.
Hook
Width
(in.)
3
/8
Depth
(mm)
(in.)
11
12
1 /16
Height
(mm)
(in.)
(mm)
43
7
87
3 /16
Approx. Pkd. Wt.
(lbs.)
(kg)
0.1
0.04
Cat. No.
Chrome-Plated
Cat. No.
Stainless
HK23C
HK23S
Manufactured by:
®
Work Center with Overhead
• Bottom Frame: Three-sided tubular
frame available in 16-gauge chromeplated or stainless steel. 30" x 60" (760 x
1525mm) work centers have 24" x 54"
760
760
760
760
760
760
760
760
760
Cantilever Shelf
• Posts: Steel posts have an outside
diameter of 15/8" (38mm), with rolled
grooves in 2" (51mm) increments along
entire height.
®
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
L02-120
Rev. 9/00
Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.