MEARIN®-Drainage Channel
An outstanding product from MEA
SUMMARY
Product features
MEARIN 100
MEARIN 160
Accessories
Installation examples
2
3–5
6
7
8
MEARIN-Drainage Channel
Drainage at its best!
MEA, a name representing advanced, quality building components to meet
the most demanding requirements. Manufactured with know-how
and precision for everyone demanding more than average
performance. In achieving perfect drainage of open
surfaces, MEARIN drainage channels show their best
qualities wherever they are installed. As
standard "100" and "160" MEARIN
drainage channels, as angle
channels; as double
channels or as heavy
duty channels;
MEARIN from MEA –
the right solution for
every requirement.
MEARIN 100 TopFix
with galv. steel slotted grating
MEARIN-Drainage Channel:
1
Glass-fibre reinforced polyester,
extensively proven over many years
2
Unbreakable, extremely strong,
abrasion-resistant
3
Frostproof, rustproof and heatproof
4
Extensive resistance against salts,
acids, oil, petrol, hot asphalt and
liquid manures
5
Special ridges provide optimal
anchorage
6
Self cleaning due to its very smooth
base and favourable cross section 1 mm slope sufficient
7
Subject to constructional changes!
2
Easy to install
MEARIN-Drainage Channel 100
Lightweight, extremely stable and unbreakable
Galvanized steel slotted grating
for cars/light goods vehicles
Galvanized mesh grating 30/10 mm
for cars/light goods vehicles
Grating locking mechanisms: (1 piece every 50 cm)
Dimensions in cm:
Grating locking mechanisms
(Except TopFix grating)
Channel and
In line trap set
MEARIN silt box
Channel length 100 cm
or 50 cm
Channel end cap
Subject to constructional changes!
10
15
③
Runner stone
①
②
B 25
For heavy loads
10
10
①
②
③
15
③
③
B 25
③
10
④
⑤
⑥
15
⑥
10
①
②
B 25
③
10
Installation examples
The finished ground level should be about 5 mm
higher than the top edge of the grating.
① Block paving
④ Asphalt
② Sand layer
⑤ Base course
③ Sub-Base
⑥ Concrete
For light loads
3
MEARIN-Drainage Channel 100
Lightweight, extremely stable and unbreakable
Reinforced galvanized mesh grating 30/10 mm
for goods vehicles
Cast iron grating
for goods vehicles and forklift trucks
Technical Data
Type
EDP-No.
Size in cm
LengthxWidthxDepth
Type of grating
„MEARIN 100 TopFix“
141621
100 x 13,6 x 12,5
Galvanized steel slotted grating
„MEARIN
50 TopFix“
141626
50 x 13,6 x 12,5
Galvanized steel slotted grating
„MEARIN 100-30/10“
141300
100 x 13,6 x 12,5
Galvanized mesh grating 30/10
„MEARIN
141250
50 x 13,6 x 12,5
Galvanized mesh grating 30/10
„MEARIN 100 ES“
141670
100 x 13,6 x 12,5
Stainless steel slotted grating
„MEARIN
141675
50 x 13,6 x 12,5
Stainless steel slotted grating
„MEARIN 100 V 30/10“
141380
100 x 13,6 x 12,5
Reinforced mesh grating 30/10
„MEARIN
141390
50 x 13,6 x 12,5
Reinforced mesh grating 30/10
„MEARIN 100 VS“
141340
100 x 13,6 x 12,5
Reinforced slotted grating
„MEARIN
141320
50 x 13,6 x 12,5
Reinforced slotted grating
„MEARIN 100 G 22“
141360
100 x 13,6 x 12,5
„MEARIN
50 G 22“
141370
50 x 13,6 x 12,5
„MEARIN 100 KSG“
141630
100 x 13,6 x 12,5
„MEARIN
50 KSG“
141635
50 x 13,6 x 12,5
„MEARIN 100 KSB“
141650
100 x 13,6 x 12,5
„MEARIN
141653
50 x 13,6 x 12,5
Load rating when installed in
accordance with instructions
for cars
50-30/10“
50 ES“
50 V 30/10“
for goods vehicles
50 VS“
Cast iron grating *
Cast iron grating
for goods vehicles and
forklift trucks
Plastic slotted grating grey *
Plastic slotted grating grey
for cars
50 KSB“
* Grating length 50 cm, 2 gratings required per metre length.
4
Plastic slotted grating beige *
Plastic slotted grating beige
MEARIN-Drainage Channel 100
Lightweight, extremely stable and unbreakable
ting
Gra
d
e
t
Slot
ic
stry
last
indu
P
s
f
f
N
RI
stu
one
food
y pr
MEA
the
ular
For
artic
p
s
area
For st
u
to r
it
r Un
e
n
s
Cor
ed a
RIN
mbl
A
e
E
s
s
M
dy a
Rea r units
e
corn
Channel Gratings – Quality with Safety:
Gratings in variety of finishes are available for each
MEARIN drainage channel. A special channel grating
locking mechanism (1 locking mechanism every 50 cm)
provides "traffic-proof" protection.
We recommend the use of grating locking
systems
5
MEARIN-Drainage Channel 160
High discharge capacity
Mesh grating 30/10 mm, 25 mm high
for cars
Cast iron grating
for good vehicles and forklift trucks
Grating locking mechanisms: (1 piece every 50 cm)
Dimensions in cm:
Channel length 100 cm
or 50 cm
Connection
DN 150
Grating locking
mechanism
Odour seal
with PVCpipe
(installation
on site)
Channel and
In line trap set
Channel end cap
Silt box 160 cross-section
10
15
③
Runner stone
①
②
B 25
For heavy loads
6
10
10
①
②
③
15
③
③
B 25
③
10
④
⑤
⑥
15
⑥
10
①
②
B 25
For light loads
③
10
Installation examples
The finished ground level should be about 5 mm
higher than the top edge of the grating.
① Block paving
④ Asphalt
② Sand layer
⑤ Base course
③ Sub-Base
⑥ Concrete
MEARIN-Accessories
Planned down to the smallest detail
MEARIN Accessories – quality from one souce
Prepacked sets, ready for delivery:
MEARIN In line trap
outlet and 4 screws
1 dirt trap with odour seal and
2 channel end caps
For larger drainage surfaces:
MEARIN silt box with silt trap and integral
odour seal
Corresponding channel grating and
2 cannel end caps
We recommend to use of
grating locking systems
Channel end cap
Channel
In line trap set
MEARIN silt box
Accessories for MEARIN 100
Type
EDP-No.
„MEARIN-Locking Mechanism
100 / 30 /10“
„MEARIN-Cast Iron Grating
Locking Mechanism“
Type of grating
141465
For mesh grating 30/10,
with stainless steel screw
141460
For cast iron grating,
with stainless steel screw
Silt box 100 TopFix
with grating
141631
50 x 13,6 x 39,5 cm
Galvanized TopFix grating
Silt box without grating
142000
50 x 13,6 x 39,5 cm
without grating
141707
50 x 12,3 cm
Galv. mesh grating 30/10
141710
50 x 12,3 cm
Stainless steel slotted grating
141731
50 x 12,3 cm
Reinf. mesh grating 30/10
141714
50 x 12,3 cm
Reinforced slotted grating
141716
50 x 12,3 cm
Cast iron grating
141709
50 x 12,3 cm
Plastic slotted grating grey
„MEARIN
Silt Box“
Size
LengthxWidthxDepth
Grating
141712
„MEARIN In Line Trap Set 100“
141400
Load rating when installed in
accordance with instructions
1 locking mechanism
every 50 cm
Accessories:
silt trap, integral odour seal
and 2 channel end caps
50 x 12,3 cm
Plastic slotted grating beige
Outlet Ø 110 mm with
4 screws, 1 dirt trap with odour seal and 2 channel end caps
Technical Data MEARIN 160
„MEARIN
„MEARIN
„MEARIN
„MEARIN
160/100-30/10“
160/50-30/10“
160/100-G 22“
160/50-G 22“
143611
143651
143661
143665
100 x 19,6 x 19 cm
50 x 19,6 x 19 cm
100 x 19,6 x 19 cm
50 x 19,6 x 19 cm
Galv. mesh grating 30/10, 25 high
Galv. mesh grating 30/10, 25 high
Cast iron grating, 2 x 50 cm
Cast iron grating
for cars
for goods vehicles and
forklift trucks
Accessories for MEARIN 160
„MEARIN Locking Mechan. 160/30/10“
143815 For 30/10 mesh grating, with stainless steel screw
„MEARIN Locking Mechan. 160/cast iron“ 143820 For cast iron grating with stainless steel screw
„MEARIN-Accessories 160“
„MEARINSilt Box“
30/10
G 22
1 locking mechanism
every 50 cm
143825 Outlet Ø 125 mm with 4 screws, dirt trap, 2 channel end caps
with outlet Ø 110 mm
143955
143950
50 x 19,6 x 70 cm
50 x 19,6 x 70 cm
Galv. mesh grating 30/10
Cast iron grating
Silt trap, integral odour
seal and 2 channel end caps
7
MEARIN-Drainage Channel 100 and 160
Installation instructions
Here’s how to do it:
1
Stretch a line. For MEARIN “100”, prepare a trench, 30 cm
wide and 25 cm deep. For MEARIN “160”, 36 cm wide and
32 cm deep. Fill with a concrete mixture (B 25) and
spread.
2
With MEARIN In line trap
For MEARIN “100” drainage channel, cut out the
preformed knockout using a knife, attach the DN 100
outlet, respectively DN 125 for the MEARIN “160”; using
the 4 screws provided and connect to soakage pit or sewer
using a standard water pipe connector and bend. Starting
at the outlet end, place the first channel on the prepared
concrete bed and straighten. Lower the following channels
into the interlocking joint.
2a
With MEARIN silt box (not pictured)
Ascertain the level for the silt box and saw off the
corresponding discharge point. Connect to soakage pit or
sewer using a standard water pipe (bend). Place channel
on the prepared concrete bed and straighten. Lower the
following channels into the interlocking joint.
3
Insert the MEA channel gratings so that they overlap the
channel joints. This helps straighten the channel and avoid
bends at channel joints. Fit one channel end cap to both
the channel start and end, or silt box. Surround channels
with concrete and make firm.
4
MEA Polymer Beton B.V.
Ambachtsweg 18, 7021 BT Zelhem, The Netherlands
P.O. Box 90, 7020 AB Zelhem, The Netherlands
Tel: (+31) 3 14 62 77 64
Fax: (+31) 3 14 62 77 77
[email protected]
www.mea.uk.com
8
973002/02.03.
If a further surface (paviers, asphalt or similar) is to be
added, allow for this in the height of concrete. For heavy
loads it is standard practice to completely bed the channels
in concrete (10 cm concrete border surrounding channel)
and then to commence laying the final surface. Depending
on the material, a freshly laid surface will settle. The top
of the completed surface should thus lie approx. 5mm
above the upper surface of the grating.