Trouble Shooting Series Jabra
GN1000 Handset Lifter
When someone rings I can’t hear the phone ringing in my headset
Look at the front of your handset lifter (while it is on
your telephone), there is a small black rubber button.
This button controls whether or not you hear the
ringing of the phone in your headset. Get someone to
ring you if you can’t hear the ringing in your headset
press this rubber button once. And, vice versa if you
don’t want to hear the ringing.
My handset keeps falling off the telephone cradle when the phone
rings
On the top of the Jabra Handset Lifter is a small lever. (Look
where the arrow is pointing.) This lever controls the height of
the lifter. Ideally you want the lifter to lift your telephone
handset only a little bit higher than the button in the handset
cradle, when a call is answered. Adjust this level lower so you
can answer calls but your handset doesn’t fall off.
The telephone ringing in my headset is too loud or too soft
The knob at the back of the handset lifter controls the telephone
ringing volume in your headset. When someone rings you, if the
phone ringing in your headset is too loud or too soft, adjust this
dial by turning it to get a comfortable ringer volume. There is a
marker which indicates volume direction levels.
The letter o
the left side