RAM Mount Catalogue
Price list 2013
Mounts, Components, Cradles,
Holders, Adapters and Accessories
ABOUT RAM MOUNT
RAM is the revolutionary universal ball and socket
mounting SYSTEM that allows you to mount practically
anything anywhere.
RAM’s family of more than 900 interchangeable accessories
will offer you solutions to your most challenging mounting
problems.
If you need to mount a GPS, laptop, pda, pocket pc, radar, camera, light, computer, cellular phone, speaker, mirror, antenna, or
just about anything else look no further. RAM mounts will help
you make a professional job easy and affordable.
Its unique design provides easy installation, mobility, strength,
versatility, vibration protection and durability, all at a low cost.
RAM is backed by NPIs renowned Lifetime Warranty which makes
it the mounting SYSTEM of choice.
To provide light weight strength and corrosion resistance, RAM
is made of marine grade aluminum with a powder coated finish,
stainless steel hardware and rubber balls.
Recognized and accepted by the U.S. Patent Office, RAM is the
only universal ball-and-socket SYSTEM that holds tremendous
amounts of weight in high vibration applications for military,
commercial and private use.
How it works
(we can build these for you)
Small Holder
Large Holder
eg. for the ipad mini
eg. for the ipad
balls join the bases
to the arms
Short arm
Medium arm
Long arm
Your choice of mounting to attach to aircraft
Suction cup
Permanent
Yoke mount
Prices subject to change due to exchange rate fluctuations.
Please confirm stock availability
HOLDERS
RAM Mounts for iPad
1. RAM Leg Kneeboard Mount for the Apple iPad
Part #: RAM-BM-L1-SB1-AP8U
Price: R1651.86
2. RAM Tab-Tite™ Universal Clamping Cradle for the Apple iPad 4,
iPad 3, iPad 2 & iPad 1 WITH OR WITHOUT LIGHT DUTY CASE
Part #: RAM-HOL-TAB3U
Price: R534.66
3. RAM Universal X-Grip III™ Tablet Holder for Large Tablets including
the Apple iPad, iPad 2, iPad 3, Samsung & Motorola XOOM
Part #: RAM-HOL-UN9U
Price: R1268.82
RAM Mounts for iPad Mini
1. RAM TAB-TITE™ Universal Clamping Cradle for the iPad mini WITH
CASE, SKIN OR SLEEVE
Part #: RAM-HOL-TAB12U
Price: R419.52
2. RAM Universal X-Grip II™ Tablet Holder with 1” Ball
Part #: RAM-HOL-UN8BU
Price: R502.74
3. RAM TAB-LOCK™ Universal Locking Cradle for the iPad mini WITH
CASE, SKIN OR SLEEVE
Part #: RAM-HOL-TABL12U
Price: R1079.58
Prices subject to change due to exchange rate fluctuations.
Please confirm stock availability
HOLDERS
RAM Mounts for Galaxy 10.1
1. RAM EZ-ROLL’R™ Model Specific Cradle for the Samsung Galaxy
Tab 10.1 & Galaxy Tab 2 10.1 WITHOUT CASE/SKIN/SLEEVE
Part #: RAM-HOL-SAM5U
Price: R346.56
2. RAM Tab-Lock™ Universal Locking Cradle for 10” Screen Tablets
WITH OR WITHOUT HEAVY DUTY CASES
Part #: RAM-HOL-TABL8U
Price: R1130.88
3. RAM Universal X-Grip III™ Tablet Holder for Large Tablets including the Apple iPad, iPad 2, iPad 3, Samsung & Motorola XOOMPart #: RAM-HOL-UN9U
Price: R1268.82
RAM Mounts for Samsung Galaxy 7 Inch
1. RAM EZ-ROLLR™ Model Specific Sync Cradle for the Samsung
GALAXY Tab 7.0 Plus WITHOUT CASE/SLEEVE/SKIN
Part #: RAM-HOL-SAM6U
Price: R429.78
2. RAM Tab-Tite™ Holder for Small Tablets with Thick Cases
Part #: RAM-HOL-TAB5U
Cost: R396.72
3. RAM Twist Lock Suction Cup Mount with Universal X-Grip™ II
Holder for Small Tablets
Part #: RAM-B-166-UN8U
Price: R981.54
Prices subject to change due to exchange rate fluctuations.
Please confirm stock availability
ACCESSORIES
1. RAM 2 7/16” X 1 5/16” BASE WITH BALL
Part #: RAM-B-238
Price: R200.64
2. RAM 2 1/2” DIA. BASE WITH 1” BALL
Part #: RAM-B-202
Price: R199.50
3. RAM 3.3” DIA. SUCT CUP W 1” BALL
Part #: RAM-B-224-1U
Price: R429.78
4. RAM 1” Diameter Ball Flat Surface Mount with 2.5” Round Base &
Diamond Base
Part #: RAM-B-138U
Price: R468.54
5. UNPKGD RAM CLAMP FOR YOKE MOUNTING
Part #: RAM-B-121BU
Price: R519.84
6. RAM DBL SOCKET ARM B BALL A LENGTH
Part #: RAM-B-201-A
Price: R289.56
7. RAM DOUBLE SOCKET ARM FOR 1” BALLS
Part #: RAM-B-201
Price: R285
8. RAM DBL SOCKET ARM B BALL C LENGTH
Product Number: RAM-B-201-C
Price: R459.42
9. UNPKD RAM SUCTION MOUNT TWIST LOCK
Part #: RAM-B-166-202U
Price: R755.82
Prices subject to change due to exchange rate fluctuations.
Please confirm stock availability
Contents
RAM Mounts for iPad
RAM Mounts for iPad Mini
RAM Mounts for Samsung Galaxy 7 Inch
RAM Mounts for Galaxy 10.1
Accessories
RAM Mounts for iPad
RAM Leg Kneeboard Mount for the Apple iPad
Part #: RAM-BM-L1-SB1-AP8U
• Compatible Devices: Apple iPad (1st Generation);
Apple iPad 2 (2nd Generation)
• Portrait or landscape view can be achieved
• RAM’s innovative ball and socket snap-link feature has
just enough friction to maintain the desired position
but also allows for quick and convenient removal.
• Material: High Strength Composite
Price: R1651.86
Prices subject to change due to exchange rate fluctuations.
RAM Tab-Tite™ Universal Clamping Cradle for the
Apple iPad 4, iPad 3, iPad 2 & iPad 1 WITH OR WITHOUT LIGHT DUTY CASE
Part #: RAM-HOL-TAB3U
• Compatible Devices: Apple iPad 4 ((With Lightning Connector)); iPad 3;
iPad 2 & iPad 1; HP TouchPad (All with or without light duty case)
• Spring loaded back plate and custom support cups makes it easy to load
and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your
tablet, allowing access to audio jacks, usb, power, and other ports.
• Tab-Tite™ Cradle Dimensions:
Height: 8.5” minimum to 10.75” maximum (21.6cm - 27.3cm)
Width: Maximum to 7.75” (19.7cm)
Edge Depth: Maximum to 0.56” (1.4cm)
• Tab-Tite™ Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various
sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
• The RAM-HOL-TAB3U is not compatible with the Apple iPad (WITH LIFE
PROOF nüüd CASE)
Price: R534.66
Prices subject to change due to exchange rate fluctuations.
RAM Universal X-Grip III™ Tablet Holder for Large Tablets including the Apple iPad, iPad 2, iPad 3, Samsung
& Motorola XOOM
Part #: RAM-HOL-UN9U
• Simple to open and close,
leaves the outside edge of
your tablet almost completely
free of obstructions, Soft rubber fingers apply just enough
force to keep your tablet in safe
and secure.
• Compatible Devices:
Apple iPad Air; Apple new iPad
(3rd Generation); Apple iPad 2 (2nd Generation); Apple iPad 1 (1st Generation); Asus
EEE Pad; Asus Eee Pad Transformer; HP TouchPad; Lenovo LePad Slate; LG G-Slate; LG
Optimus Pad; Microsoft Surface RT, Surface 2, Surface Pro, Surface Pro 2 (with or without
protective case); Motorola XOOM; Motorola XYBOARD 10.1; Pandigital R90A200; Samsung
Galaxy Tab 8.9; Samsung Galaxy Tab 10.1; Samsung Galaxy Tab 2 10.1; Toshiba Thrive;
Most 10” Screen Tablets and with all devices that maintain the following dimensions below:
Minimum Width = 6.25” (15.87cm)
Maximum Width = 8.1” (20.57cm)
Depth = 0.875” (2.22cm)
• Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many 1” socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your
tablet
6. Multiple mounting access points on the back of the holder
7. Additional support keeper at the bottom of the holder
8. Will not interfere with electronic ports, speakers etc
• Note: The RAM-HOL-UN9 does not include a “ball” and will require either a RAM-B238 or RAM-B-202
Price: R1268.82
RAM Mounts for iPad Mini
RAM TAB-TITE™ Universal Clamping Cradle for the iPad
mini WITH CASE, SKIN OR SLEEVE
Part #: RAM-HOL-TAB12U
• The spring loaded design makes it easy to load and unload your tablet, along with
keeping it secure while on the go.
Interchangeable cup ends are designed to optimize the functionality of your tablet,
allowing access to audio jacks, usb, power, and other ports.
• Compatible with the following tablets: Apple iPad mini WITH CASE, SKIN, SLEEVE as well
as with any tablet that will fit the dimensions listed below. It is important to verify the
dimensions of your tablet when determining the overall size.
• The Tab-Tite™ cradle is compatible with
Height: 6.80” minimum to 9” maximum
Width: Maximum width to 5.68”
Depth: 0.125” minimum to 1” maximum
• Specifications:
Docking Cradle: No
Locking Cradle: No
Fit’s Tablet’s WITH Cases: Yes
Fit’s Tablet’s WITHOUT Cases: No
Low Vibration Environment: Yes
High Vibration Environment: Yes
• Tab-Tite™ Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
• Material: High Strength Composite
Price: R419.52
Prices subject to change due to exchange rate fluctuations.
RAM Universal X-Grip II™ Tablet Holder with 1” Ball
Part #: RAM-HOL-UN8BU
• The RAM X-Grip II™ has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. Compatible and
interchangeable with a wide range of popular RAM Mounting products.
• Consists of a spring loaded holder and 1” rubber ball connected to the back of the
base. Included are extra easy access grip knobs, located on the back of the holder for
quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit
of most 7” tablets.
• Compatible Devices:
Apple iPad Mini; Amazon Kindle; Amazon Kindle Fire; Archos 7; Asus EEE Pad Memo;
Barnes & Noble NOOKcolor; BlackBerry PlayBook; Dell Streak 7; HTC Flyer; Panasonic
Toughpad™ JT-B1; Samsung Galaxy Tab (7” version); Nexus 7; All devices that maintain
the following dimensions below:
• Holder Dimensions:
Minimum Width = 5.7cm (Devices 5.7cm in width must be a minimum of 17.8cm in height
to fit)
Maximum Width = 14.6cm
Depth = 2.2cm
• Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1” socket
mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your
tablet
• Material: High Strength Composite with Rubber Tips
• Ball Size: 1” Rubber Ball “B” Size
Price: R502.74
Prices subject to change due to exchange rate fluctuations.
RAM TAB-LOCK™ Universal Locking Cradle for the iPad
mini WITH CASE, SKIN OR SLEEVE
Part #: RAM-HOL-TABL12U
•
The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support
cups and locking mechanism for the iPad mini. This spring loaded design makes
it easy to load and unload your iPad mini, along with keeping it secure while on
the go. Cup ends are designed to optimize the functionality of your tablet, allowing
access to audio jacks, usb, power, and other ports. Quickly lock the cradle, keeping
your iPad mini secure and safe from theft.
•
•
•
•
The RAM-HOL-TABL12U cradle is compatible with the following tablets:
Apple iPad mini WITH CASE, SKIN, SLEEVE
The Tab-Lock™ holder is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Holder Dimensions:
Height: 6.55” minimum to 9.8” maximum
Width: Maximum width to 5.68”
Depth: 0.125” minimum to 1” maximum
Cradle Features:
1. Locking mechanism for theft deterrence
2. Compatible with multiple third party iPad mini skins, sleeves and cases
3. Support cups contain open slots to accommodate for tablets of various sizes
4. Back plate can support various size support cups
5. Spring loaded tension provides secure support for your tablet
6. Spring loaded cradle allows for quick release of your tablet
7. High strength materials maximize longevity of cradle
8. Full access to all ports
9. Lifetime warranty
•
Material: High Strength Composite
•
Look at our other mounts for Suction Cups and other bases for mounting options for
bikes / cars / boats / planes etc.
Price: R1079.58
Prices subject to change due to exchange rate fluctuations.
RAM Mounts for Galaxy 10.1
RAM EZ-ROLL’R™ Model Specific Cradle for the Samsung
Galaxy Tab 10.1 & Galaxy Tab 2 10.1 WITHOUT CASE/
SKIN/SLEEVE
Part #: RAM-HOL-SAM5U
• This cradle is designed to hold the following devices:
• Samsung Galaxy Tab 10.1 and Galaxy Tab 2 10.1 WITHOUT CASE, SKIN OR
SLEEVE
• For a device with a case, skin or sleeve, please look at the UN9 or the various
TAB holders.
• Features:
1. Easy access to electronic ports
2. Patent pending EZ-ROLL’R™ roller design for super smooth placement and
removal of the iPad
• Material: High Strength Composite
Price: R346.56
Prices subject to change due to exchange rate fluctuations.
RAM Tab-Lock™ Universal Locking Cradle for 10” Screen Tab• Keep your tablet safe with the new RAM Tab-Lock™ universal locking cradle.
This compact yet durable holder won’t take up a lot of space yet provides loads
of security.
• The RAM Tab-Lock™ universal locking cradle is compatible with the following tablets & cases:
10” Screen Tablets with or without heavy duty cases
10” Screen Tablets with OtterBox® Defender cases
10” Screen Tablets with Gumdrop Drop Tech cases
10” Screen Tablets with Griffin Technology cases
10” Screen Tablets with Belkin cases
Many More!
• The Tab-Lock™ cradle is compatible with any tablet or reader that will fit the dimensions
listed below. It is important to verify the dimensions of your tablet when determining the
size.
Maximum Width = 20.62cm (8.12”)
Length Range = 21.59cm to 26.67cm (8.5” to 10.5”)
Maximum Depth = 2.84cm (1.12”)
• Features:
1. Support cups contain open slots to accommodate for tablets of varying dimensions
2. Spring loaded for ease of removal and insertion of your tablet
3. Full access to all ports
4. Customize height of holder for your tablet
5. Locking mechanism for theft deterrence
6. Best usage in high vibration environments
• Material: High Strength Composite
• Included with Purchase:
(1) Spring loaded locking back plate
(2) Support cups for thick tablets
• Mounting hardware
Use with any RAM bases:
RAM-B-166 - Locking Suction Cup
RAM-B-149U - U-Bolt
RAM-B-316-1-238U - POD I
Price: R1130.88
Prices subject to change due to exchange rate fluctuations.
RAM Universal X-Grip III™ Tablet Holder for Large Tablets including the Apple iPad, iPad 2, iPad 3, Samsung & Motorola XOOM
Part #: RAM-HOL-UN9U
• Simple to open and
close, the spring
loaded RAM X-Grip
III™ leaves the outside
edge of your tablet almost completely free of
obstructions. Soft rubber
fingers apply just enough
force to keep your tablet in
safe and secure.
• Compatible Devices:
Apple iPad Air; Apple new iPad (3rd Generation); Apple iPad 2 (2nd Generation); Apple iPad
1 (1st Generation); Asus EEE Pad; Asus Eee Pad Transformer; HP TouchPad; Lenovo LePad
Slate; LG G-Slate; LG Optimus Pad; Microsoft Surface RT, Surface 2, Surface Pro, Surface
Pro 2 (with or without protective case); Motorola XOOM; Motorola XYBOARD 10.1; Pandigital
R90A200; Samsung Galaxy Tab 8.9; Samsung Galaxy Tab 10.1; Samsung Galaxy Tab 2 10.1;
Toshiba Thrive; Most 10” Screen Tablets
• All devices that maintain the following dimensions below:
Minimum Width = 6.25” (15.87cm)
Maximum Width = 8.1” (20.57cm)
Depth = 0.875” (2.22cm)
• Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many 1” socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
6. Multiple mounting access points on the back of the holder
7. Additional support keeper at the bottom of the holder
8. Will not interfere with electronic ports, speakers etc
• Note:
The RAM-HOL-UN9 does not include a “ball” and will require either a RAM-B-238 or
RAM-B-202
Price: R1268.82
Prices subject to change due to exchange rate fluctuations.
RAM Mounts for Samsung
Galaxy 7 Inch
RAM EZ-ROLLR™ Model Specific Sync Cradle for the Samsung GALAXY Tab 7.0 Plus WITHOUT CASE/SLEEVE/SKIN
Part #: RAM-HOL-SAM6U
• This RAM high strength composite cradle is designed to hold the following
devices:
Samsung Galaxy Tab 7.0 Plus WITHOUT CASE, SKIN, SLEEVE
• Alternative Cradles:
• RAM-HOL-UN8 - X-Grip™ cradle for the Samsung Galaxy Tab 7.0 Plus WITH
CASE, SKIN OR SLEEVE.
• RAM-HOL-TAB2 - Tab-Tite™ cradle for the Samsung Galaxy Tab 7.0 Plus WITH
CASE, SKIN OR SLEEVE.
• Features:
1. Easy access to electronic ports
2. Patent pending roller design for super smooth placement and removal of
the Galaxy
• Material: High Strength Composite
• Note:
The RAM-HOL-SAM6U will not hold the Samsung Galaxy 7.0. RAM cradles do
not include the RAM-B-202U (Round Base & 1” Ball) or RAM-202U (Round
Base & 1.5” Ball), required to attach to the cradle and RAM mounting system.
Price: R429.78
Prices subject to change due to exchange rate fluctuations.
RAM Tab-Tite™ Holder for Small Tablets with Thick Cases
Part #: RAM-HOL-TAB5U
• With interchangeable cup ends, you can fit the holder to your tablet for
a near custom fit. This spring loaded design makes it easy to load and
unload your tablet Tab, along with keeping it secure while on the go. Cup
ends are designed to optimize the functionality of your tablet, allowing
access to audio jacks, usb, power, and other ports, your Tab can be used
just as it was intended. Perfect for stationary or on the go applications,
this new RAM product is just what you need to get the most out of your
mobile device.
• The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet
when determining the overall size.
Height: 5” minimum to 9.1” maximum
Width: Maximum width to 4.70”
Depth: 0.125” minimum to 0.44” maximum
• Features:
1. Support cups contain open slots to accommodate for tablets of various
sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
• Material: High Strength Composite
Price: R396.72
Prices subject to change due to exchange rate fluctuations.
RAM Twist Lock Suction Cup Mount with Universal XGrip™ II Holder for Small Tablets
Part #: RAM-B-166-UN8U
• The RAM X-Grip™ II Holder is Compatible with the Following Tablets:
Amazon Kindle WITH OR WITHOUT LIGHT DUTY CASE; Amazon Kindle Fire WITH
OR WITHOUT LIGHT DUTY CASE; Amazon Kindle Fire HD WITH OR WITHOUT LIGHT
DUTY CASE; Apple iPad mini WITH OR WITHOUT LIGHT DUTY CASE; Archos 7 WITH
OR WITHOUT LIGHT DUTY CASE; Asus EEE Pad Memo WITH OR WITHOUT LIGHT DUTY
CASE; Barnes & Noble NOOKcolor WITH OR WITHOUT LIGHT DUTY CASE; BlackBerry
PlayBook WITH OR WITHOUT LIGHT DUTY CASE; Dell Streak 7 WITH OR WITHOUT
LIGHT DUTY CASE; HTC Flyer WITH OR WITHOUT LIGHT DUTY CASE; Motorola XYBOARD
8.2 WITH OR WITHOUT LIGHT DUTY CASE; Pantech Element WITHOUT CASE; Panasonic
Toughpad™ JT-B1 WITH OR WITHOUT LIGHT DUTY CASE; Samsung Galaxy Tab (7” version) WITH OR WITHOUT LIGHT DUTY CASE; Samsung GALAXY Tab 7.0 Plus WITH OR
WITHOUT LIGHT DUTY CASE; Nexus 7; Most 7” Screen Tablets; All devices that maintain
the following dimensions below:
• Dimensions:
Minimum Width = 5.7cm (Devices 5.7cm in width must be a minimum of 17.8cm in height
to fit)
Maximum Width = 14.6cm
Depth = 2.2cm
• Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many RAM 1” socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
6. Lifetime warranty
7. Rustproof
• Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
• Ball Size: 1” Rubber Ball “B” Size
Price: R981.54
Prices subject to change due to exchange rate fluctuations.
ACCESSORIES
RAM 2 7/16” X 1 5/16” BASE WITH BALL
Part #: RAM-B-238
• The powder coated marine grade aluminum base contains a 1” diameter
rubber ball connected at right angles to a 1.25” x 2.5” inch diamond plate.
The base has two holes 1.912” from center to center, positioned at both
ends of the diamond base. Material:
• Powder Coated Marine Grade Aluminum Ball Size:
• 1” Rubber Ball “B” Size Note:
• Part number reflects product packaged in clear clam shell for store shelf display.
Price: R200.64
Prices subject to change due to exchange rate fluctuations.
RAM 2 1/2” DIA. BASE WITH 1” BALL
Part #: RAM-B-202
• The (RAM-B-202) RAM marine grade aluminum base contains a 1”
diameter rubber ball connected to a flat 2.5” diameter base. This mount
has pre-drilled holes, including the universal AMPS hole pattern.
• Material:
Powder Coated Marine Grade Aluminum
• Ball Size:
1” Rubber Ball “B” Size
• Note:
Part number reflects product packaged in clear clam shell for store shelf
display. The RAM-B-202 will attach to any RAM composite cradle; however, the
RAM-B-238U is most commonly used.
Price: R199.50
Prices subject to change due to exchange rate fluctuations.
RAM 3.3” DIA. SUCT CUP W 1” BALL
Part #: RAM-B-224-1U
• This product The RAM-B-224-1U, composite twist lock mount consists of
a 3.25” rubber base that has a is connected to the (RAM-B-238U), diamond base with 1” rubber ball. The suction cup is designed to have an
extra strong hold on any smooth non-porous surface, but for best result,
mount the suction cup on a glass or non-porous plastic surface.
• Material:
High Strength Composite
• Ball Size:
1” Rubber Ball “B” Size
• Note:
The “U” in the part number reflects product packaged in poly bag. Related
Links:RAM Suction Cup Mounts PageMounting hardware
• Use with any RAM bases:
RAM-B-166 - Locking Suction Cup
RAM-B-149U - U-Bolt
RAM-B-316-1-238U - POD I
Price: R429.78
Prices subject to change due to exchange rate fluctuations.
RAM 1” Diameter Ball Flat Surface Mount with 2.5”
Round Base & Diamond Base
Part #: RAM-B-138U
• The RAM-B-138U consists of a 2.5” diameter round base that contains the universal AMPs hole pattern, double socket arm and diamond base adapter. The mount is designed with a 1” diameter patented rubber ball and socket system that has adjustment points at both
ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond
base adapter will connect to most RAM cradles. The included RAM’s patented design dampens shock and vibration, helping to extend the life of
your device.
• Overall Height: 5.03”
• Material: Powder Coated Marine Grade Aluminum
• Ball Size : 1” Rubber “B” Ball Size
Price: R468.54
UNPKGD RAM CLAMP FOR YOKE MOUNTING
Part #: RAM-B-121BU
• UNPKGD RAM CLAMP FOR YOKE MOUNTING1 Inch Rubber BallBlack
Powder CoatPowder Coated Marine Grade Aluminum
Price: R519.84
Prices subject to change due to exchange rate fluctuations.
RAM DBL SOCKET ARM B BALL A LENGTH
Part #: RAM-B-201-A
• The RAM-B-201-A, short double socket arm, has a socket at both
ends that accommodates 1” ball bases. A single spring inside the
arm opens the end sockets, allowing you to pivot the ball and socket
connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
• Dimensions:
Overall Length: 2.38”
Socket-To-Socket Length: 2”
• Material:
Powder Coated Marine Grade Aluminum
• Ball Size:
1” Rubber Ball “B” Size
• Note:
Part number reflects product packaged in clear clam shell for store shelf
display.
• RAM® double socket arms with their distinctive hour-glass shape are designed and recognized to provide the best possible performance for most
any application
Price: R289.56
Prices subject to change due to exchange rate fluctuations.
RAM DOUBLE SOCKET ARM FOR 1” BALLS
Part #: RAM-B-201
• The RAM-B-201U powder coated marine grade aluminum 3.0” double socket
arm allow for connnection to a 1” diameter ball. Socket technology allows for
almost infinite adjustment and perfect viewing angles.
• Dimensions:
Overall Length: 3.69”
Socket-To-Socket Length: 3”
• Material: Powder Coated Marine Grade Aluminum
• Ball Size: 1” Rubber Ball “B” Size
• Note: Part number reflects product packaged in clear clam shell for store shelf display.
Price: R285
RAM DBL SOCKET ARM B BALL C LENGTH
Part #: RAM-B-201-C
• The RAM-B-201-C, long double socket arm, has a socket at both ends that accommodates
1” ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the
ball and socket connection. This socket technology allows for almost infinite adjustment and
perfect viewing angles.
• Dimensions:
Overall Length: 6”
Socket-To-Socket Length: 5.1875”
• Material: Powder Coated Marine Grade Aluminum
• Ball Size: 1” Rubber Ball “B” Size
• Note: Part number reflects product packaged in clear clam shell for store shelf display.
RAM® double socket arms with their distinctive hour-glass shape are designed and
recognized to provide the best possible performance for most any application
Price: R459.42
Prices subject to change due to exchange rate fluctuations.
UNPKD RAM SUCTION MOUNT TWIST LOCK
Part #: RAM-B-166-202U
• The RAM twist lock suction cup mount consists of a 3.25” suction cup
locking base and round base end. The mount is designed with a RAM
1” diameter patented rubber ball and socket system that has adjustment point at the cradle plate and base. Simply attach the suction cup
base to the windshield of your vehicle for an easy and safe way to view
your iPhone in your vehicle. Rubber ball and socket technology allows for
almost infinite adjustment and perfect viewing angles. High quality materials ensure your iPhone is safe, secure, and within easy reach. RAM’s
patented design also dampens shock and vibration helping to extend the
life of your mobile device. The round base is a flat 2.5” diameter base; this
mount has pre-drilled holes, including the universal AMPS hole pattern.
• Material: Powder Coated Marine Grade Aluminum
• Note:
Part number reflects product packaged in clear clam shell for store shelf display. Related Links:RAM Suction Cup Mounts Page
Price: R755.82
Prices subject to change due to exchange rate fluctuations.