Department
Hydrogen and Batteries
Li-Ion Batteries
In order to improve durability and
safety of pouch-cells, ZBT characterizes
materials
for
bag
production
mechanically and chemically.



Chemical resistance of aluminum
composite foils and adhesive tapes
against electrolytes
Tensile strength of aluminum
composite foils and heat sealed joint
Strength and electrical conductivity
of welded connection between
electrodes and contact tabs
Head of Department
Dipl.-Ing. Bernd Oberschachtsiek
Phone: +49 (0)203 7598-4280
Email: [email protected]
Services

Measurement of electrolyzer stacks

Characterization of H2 storage tanks
and materials

Development of Li battery electrodes

Electrochemical battery cell tests
up to 5 A / 6 V

Impedance spectroscopy on half cells
and full cells
ZBT GmbH
Zentrum für BrennstoffzellenTechnik
Carl-Benz-Straße 201
47057 Duisburg
Phone: +49 (0)203 7598-0
Fax: +49 (0)203 7598-2222
[email protected]
www.zbt-duisburg.de
Electrolysis, Hydrogen
Storage, Li-Ion Batteries
ZBT GmbH
The Fuel Cell Research Center
Electrolysis
Water electrolysis using electricity from
renewable energies is a promising
option to produce emission free
hydrogen as fuel and storage medium.
Hydrogen Storage and
Infrastructure
Metal hydride test bench

Investigation of H2 solid state
storage
Research at ZBT is focused on

AEM-Electrolysis

Determination of storage capacity

NT-PEM-Electrolysis


HT-PEM-Electrolysis
Low temperature as well as high
temperature metal hydride storage
tanks up to 50 bar and 400 °C
Services

Development of components: Cell
concept, bipolar plates, current
distributor

Investigation of single cells

Stack development and
measurement
Magnetic suspension balance


Characterization of materials for
hydrogen storage in a wide
temperature and pressure range
Test gases helium and hydrogen
Hydrogen infrastructure

Concepts for filling stations

Well-to-Wheel-Analysis of hydrogen
supply

Safety analysis and concepts
Li-Ion Batteries
In
order
to
achieve
optimum
performance
of
active
materials,
process parameters and components
for electrode preparation must be
adapted.
ZBT is your
optimization.
partner
for
electrode

Preparation of electrodes for half cell
and full cell tests

Variation of binder and additive
materials

Electrode compression

Adaptation of process parameters

Electrochemical testing using
different cell geometries from 1 cm²
up to 170 cm²