Force
Quartz Transverse Measuring Pin
Type 9240AA3, 9240AB3,
9240AC3
for Indirect Force Measurement in Machines and Tools
Piezoelectric sensor for indirect force measurement in machine
structures, tools, etc. in industrial monitoring tasks.
ø8
• Preloading allows measuring compression and tension
forces
• Can be fixed in any direction and depth in the mounting
bore
• Ground-isolated
14,5
Description
The front part of the sensor is sensitive to transversal forces.
Shaped as a cylindrical pin, all it needs for its installation is a
8 mm borehole. An integrated clamping system is used to preload the sensor in the borehole enabling it to detect tensile and
compressive forces in the machine structure. The ceramic-coated body sleeve allows to mount the sensor ground insulated.
The main application field is the industrial monitoring of machine forces (machine monitoring, tool monitoring, etc.).
In combination with a ControlMonitor (maXYmos) it can be
used to monitor limit values of forces that are decisive in the
safety and reliability of machines and tools.
9240A_003-229e-03.16
Technical Data
Range
with preload 510 N
with preload 850 N
with preload 1 190 N
Overload
with preload 510 N
with preload 850 N
with preload 1 190 N
Threshold in test object
Sensitivity in test object
μ
μ
μ
μ
μ
μ
μ
pC/μ
0 ... 500
–140 ... 350
–285 ... 210
850
700
570
0,005
≈–9,5
L=3m
M3x0,35
KIAG M3pos.
Type 9240AB3
L=3m
ø8 mm
M4x0,35 pos.
Application
The sensor is easily mountable and allows to measure forces
within a machine part or a tool.
Once installed, the sensor can be calibrated by comparative
measurement, e.g. with a calibrating force sensor.
Type 9240AA3
Type 9240AC3
Fz
L=3m
2,6 ±0,05
KISTLER
9240A
SN______
Fz
Force sensitivity for preload
Linearity
Hysteresis
Repeatability of sensitivity
after demounting and remounting
Acceleration sensitivity
(measuring direction) 10 g RMS
Operating temperature range
Insulation resistance at 20 °C
Ground insulation
Capacitance
Protection class
Weight
pC/N
% FSO
% FSO
%
μ/g
°C
Ω
Ω
pF
g
≈–4
≤±1
≤1,5
±2
≤0,02
–40 ... 200
≥1013
≥108
338
IP 64
34
-6
1 μ = 1 microstrain = 10 m/m;
1 N (Newton) = 1 kg·m·s-2 = 0,1019... kp = 0,2248... lbf,
1 kp = 1 kgf = 9,80665 N
Page 1/3
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
©2015 ... 2016, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, [email protected], www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
Quartz Transverse Measuring Pin for Type 9240AA3, 9240AB3, 9240AC3
Mounting
By adjusting the nut the sensor is preloaded using a charge
amplifier and a display unit.
Transition Coupling for Type 9240AA...
Typ 1729A
KIAG 10-32 neg. / 10-32.neg.
The mounting tool Type 1300A161A... is used for deep hole
mounting.
Typ 1721
KIAG 10-32 neg. / BNC pos.
Mounting Examples
Typ 1723
KIAG 10-32 pos.
8 ... 14,5
KIAG 10-32 neg. / TNC pos.
Type 9240A...
ø8H8
9241CA3
Type
9240AA3
9241CAsp
Typ 1700A9
KIAG 10-32 neg. / KE102A014
Fischer
Type 9240A...
Typ 1700A11
min. 8
Type 9240A...
65000539
KIAG 10-32 neg. / KE103A015
Fischer
Fig. 2:
Fig. 1:
T = 10 ... 118 mm mounting tool with Type 1300A161A100
T = 10 ... 318 mm mounting tool with Type 1300A161A300
x = 100 = 1300A161A100
x = 300 = 1300A161A300
25,8
Mounting tool
9240A_003-229e-03.16
Fig. 3:
Transition coupling
Page 2/3
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
©2015 ... 2016, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, [email protected], www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
Quartz Transverse Measuring Pin for Type 9240AA3, 9240AB3, 9240AC3
Examples with Common Protection Hoses
Variant I
Plastic protection hose and fast screwing by FESTO Pneumatic
Type 9240AB3
Type 5037A...
ø8H8
KIAG M3
24
L=3m
Variant II
Flexopneu hose with metal braiding and fast screwing by FESTO Pneumatic
Type 9240AB3
ø8H8
KIAG M3
24
9240A_003-229e-03.16
L=3m
Optional Accessories
• Mounting tool 100 mm
consisting of:
Inner part
Outer part
• Mounting tool 100 mm
consisting of:
Inner part
Outer part
• Coupling M3 neg. – BNC pos.
• Coupling M4 neg. – BNC pos.
• Coupling KIAG 10-32 pos. – BNC pos.
Type/Art. No.
1300A161A100
Ordering Key
55143065
55143066
1300A161A300
Sensor with integrated high temperature
cable, KIAG 10-32 pos. connector (L = 3 m)
Type 9240AA
3
Type 9240AB
55143067
55143068
1706
1705
1721
Sensor with integrated high temperature
cable, M3 pos. connector (L = 3 m)
3
Type 9240AC
Sensor with integrated high temperature
cable, M4 pos. connector (L = 3 m)
3
Page 3/3
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
©2015 ... 2016, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, [email protected], www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.