TAIKO CLAY MARKETING SDN. BHD (429100-K)
(Incorporated in Malaysia)
Business Address:
B2-05-01, Block B2, Meritus @ Oasis Corporate Park,
No. 2, Jalan PJU 1A/2, Ara Damansara,
47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia.
Tel No. 603-7660 7716 Fax No. 603-7660 9913
Email: [email protected]
www.taikogroup.net
SAFETY DATA SHEET
Section 1 – Identification of the hazardous chemical and of the supplier
Product identifier
Product name: Activated Bleaching Earth.
Trade name: TAIKO®.
IUPAC name: Not Applicable.
CAS number: 70131-50-9.
Other means of identification
Chemical name: Bentonite, acid activated.
Synonym: Activated clays.
Recommended use of the
As adsorbent (processing aids) in refining edible oils and fats.
chemical and restrictions on use
Details of principal supplier
Supplier
Name: Taiko Clay Marketing Sdn. Bhd.
Address: B2-05-01, BLOK B2, MERITUS @ OASIS, CORPORATE PARK
(PUSAT KORPORAT OASIS), NO.2 JALAN PJU 1A/2, ARA
DAMANSARA, 47301 PETALING JAYA, SELANGOR, MALAYSIA.
Phone number: +603 7660 7716
Fax number: +603 7660 9913
Email: [email protected]
Section 2 – Hazard Identification
Classification of the substance
Not classified as a hazardous chemical.
and any nation or regional
information
Label elements
Hazard pictogram:
Signal word: Warning.
Hazard statement:
May cause skin, eye and respiratory irritation and harmful if inhaled.
1.
2.
3.
4.
5.
Other hazards which do not
result in classification or are not
covered by the Regulations
Precautionary statement:
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
Do not eat or drink when using this product.
Avoid breathing dust.
Use only outdoors or in a well-ventilated area.
Not Applicable.
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
material or in any process. Such information is, to the best of our knowledge and belief, accurate and reliable as of the date indicated.
However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to
satisfy himself/herself as to the suitability of such information for his/her own particular use.
TAIKO CLAY MARKETING SDN. BHD (429100-K)
(Incorporated in Malaysia)
Business Address:
B2-05-01, Block B2, Meritus @ Oasis Corporate Park,
No. 2, Jalan PJU 1A/2, Ara Damansara,
47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia.
Tel No. 603-7660 7716 Fax No. 603-7660 9913
Email: [email protected]
www.taikogroup.net
Section 3 – Composition and information of the ingredients of the hazardous chemical
Chemical identity
Bentonite, acid activated
Common name, synonyms
Activated Bleaching Earth
CAS Number
70131-50-9
EINECS number
274-324-8
Chemical composition
Typical chemical composition
SiO2
55 – 80
Al2O3
5 – 20
Fe2O3
2 – 10
MgO
0–8
CaO
0–5
Na2O
0–2
K2O
0–2
Note (Nota):
1. Analysis may vary with clay sources and is quoted as % dry weight.
2. Elements present in the clay have been expressed as their oxides.
3. Typical analysis is available at Technical Data Sheet.
Not Applicable.
Impurities and stabilizing
additives which are themselves
classified and which contribute to
the classification of the
substance
Section 4 – First-aid measures
Description of necessary
measures, subdivided according
to the different routes of
exposure, i.e. inhalation, skin
and eye contact and ingestion
Most important
symptoms/effects, acute and
delayed
Identification of immediate
medical attention and special
treatment, if necessary
Inhalation
Movement of the exposed person to fresh air, loosen clothing and seek
medical attention.
Skin
Irrigate thoroughly with cold water. Seek medical attention if symptoms
persist.
Eye
Irrigate thoroughly with cold water. Seek medical attention if symptoms
persist.
Ingestion
If small amounts, drink copious amounts of water. If large amounts are
ingested seek medical attention.
Not applicable.
Not applicable.
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
material or in any process. Such information is, to the best of our knowledge and belief, accurate and reliable as of the date indicated.
However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to
satisfy himself/herself as to the suitability of such information for his/her own particular use.
TAIKO CLAY MARKETING SDN. BHD (429100-K)
(Incorporated in Malaysia)
Business Address:
B2-05-01, Block B2, Meritus @ Oasis Corporate Park,
No. 2, Jalan PJU 1A/2, Ara Damansara,
47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia.
Tel No. 603-7660 7716 Fax No. 603-7660 9913
Email: [email protected]
www.taikogroup.net
Section 5 – Fire-fighting measures
Suitable (and unsuitable)
Products are non-combustible.
extinguishing media
Use extinguisher to suit the cause of fire.
Products may be a slip hazard when wet.
Specific hazards arising from the Not applicable.
chemical (e.g. nature of any
combustion hazardous products)
Special protective equipment and Not applicable.
precautions for fire-fighters.
Section 6 – Accidental release measures
Personal precautions, protective
Avoid generating excessive dust and if necessary wear protective clothing.
equipment and emergency
Refer to Section 8.
procedures
Environmental precautions
Not applicable.
Methods and material for
Sweep up or vacuum spilled products and dispose off in accordance with
containment and cleaning
local regulations.
Contact Taiko Clay Marketing Sdn. Bhd. (TCM) to activate emergency
respond procedures (ERP), if necessary.
Section 7 – Handling and storage
Precautions for safe handling
Handle using methods, which minimize generation and dispersion of dust.
Ensure adequate ventilation at point of use.
Avoid breathing dust.
Use NIOSH/DOSH approved respirator where the dust level is above
Permissible Exposure Limit (PEL).
Advice on personal hygiene:
1. 1. Do not eat or drink when using this product.
2. 2. Wash hands after use.
Conditions for safe storage,
Store in a dry environment and covered warehouse. High humidity causes
including any incompatibilities
caking of the powder.
Storage of product in bulk silo is highly recommended.
Isolate from toxic substances to avoid contamination.
Avoid unsegregated storage with incompatible materials, which decompose
in the presence of dusts and weak acid such as cyanides, sulphates and
peroxides.
Avoid long term contact with galvanized or mild steel surfaces under damp
conditions.
Avoid storage with unsaturated organic compounds.
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
material or in any process. Such information is, to the best of our knowledge and belief, accurate and reliable as of the date indicated.
However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to
satisfy himself/herself as to the suitability of such information for his/her own particular use.
TAIKO CLAY MARKETING SDN. BHD (429100-K)
(Incorporated in Malaysia)
Business Address:
B2-05-01, Block B2, Meritus @ Oasis Corporate Park,
No. 2, Jalan PJU 1A/2, Ara Damansara,
47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia.
Tel No. 603-7660 7716 Fax No. 603-7660 9913
Email: [email protected]
www.taikogroup.net
Section 8 – Exposure controls and personal protection
Control parameters e.g.
Maximum Permissible Exposure Limits (PEL)
permissible exposure limit and
in terms of respirable crystalline silica:biological limit values
WEL/OES HSE (UK)
: 0.3mg/m3 TWA
ACGIH (USA)
: 0.05mg/m3 TWA
MAC- MSZW (Netherlands) : 0.075mg/m3 TWA
Due to variation in PEL, users are advised to refer to the relevant PEL
adopted in the countries concerned.
Appropriate engineering controls
Individual protection measures,
such as personal protective
equipment
PEL is expressed as a Time-Weighted Average (TWA) concentration of that
product over an 8-hour working shift.
Note: The typical respirable crystalline silica (RCS) for fresh bleaching earth
of ≤ 1%, is compliable for respirable fraction < 5 µm.
Maintain air concentration below PEL, using engineering controls if
necessary.
Use only in well-ventilated area.
Eye/face protection
Wear safety glasses with side shields.
Eye wash bottles should be provided at places where accidental exposure
may be possible.
Contact lenses should not be worn.
Skin protection
Normal work wears.
Wear PVC or rubber gloves.
No further skin protection is required unless there is a possibility of
prolonged personal contact, and then appropriate
protective skin cover is recommended.
Respiratory protection
NIOSH/DOSH approved respirators should be used if the PEL cannot be met
even after instituting engineering controls.
Thermal hazards
Not Applicable.
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
material or in any process. Such information is, to the best of our knowledge and belief, accurate and reliable as of the date indicated.
However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to
satisfy himself/herself as to the suitability of such information for his/her own particular use.
TAIKO CLAY MARKETING SDN. BHD (429100-K)
(Incorporated in Malaysia)
Business Address:
B2-05-01, Block B2, Meritus @ Oasis Corporate Park,
No. 2, Jalan PJU 1A/2, Ara Damansara,
47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia.
Tel No. 603-7660 7716 Fax No. 603-7660 9913
Email: [email protected]
www.taikogroup.net
Section 9 – Physical and chemical properties
Appearance
Free flowing powder.
Odour
Earthly smell.
Odour threshold
Not applicable.
pH
Mildly acidic in suspension.
Melting point/freezing point
Not applicable.
Initial boiling point and boiling
Not applicable.
range
Flash point
Not applicable.
Evaporation rate
Not applicable.
Flammability (solid/gas)
Not applicable.
Upper/lower flammability or
Not applicable.
explosive limits
Vapour pressure
Not applicable.
Vapour density
Not applicable.
Relative density
350-1000kg/m3.
Solubility(ies)
Negligible solubility in water, solvents and oils.
Partition coefficient: nNot applicable.
octanol/water
Auto-ignition temperature
Not applicable.
Decomposition temperature
Not applicable.
Viscosity
Not applicable.
Section 10 – Stability and reactivity
Reactivity
Product may cause polymerization with generation of heat when contacted
with unsaturated organic materials.
Chemical stability
Product is chemically stable under ambient conditions.
Possibility of hazardous
Hydrogen gas may be liberated (explosion hazard) when product is contacted
reactions
with metals in wet conditions.
Polymerization with generation of heat may occurred when product is
contacted with unsaturated organic materials.
Condition to avoid (e.g. static
Avoid exposure to water.
discharge, shock or vibration)
Incompatible materials
Avoid metals especially when wet since hydrogen gas may be liberated
(explosion hazard).
Avoid contact with unsaturated organic materials as product may cause
polymerization with generation of heat.
Hazardous decomposition
Dry products – None.
products
The product saturated with oxidisable liquid can lead to spontaneous heating
effects, which may result in a fire.
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
material or in any process. Such information is, to the best of our knowledge and belief, accurate and reliable as of the date indicated.
However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to
satisfy himself/herself as to the suitability of such information for his/her own particular use.
TAIKO CLAY MARKETING SDN. BHD (429100-K)
(Incorporated in Malaysia)
Business Address:
B2-05-01, Block B2, Meritus @ Oasis Corporate Park,
No. 2, Jalan PJU 1A/2, Ara Damansara,
47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia.
Tel No. 603-7660 7716 Fax No. 603-7660 9913
Email: [email protected]
www.taikogroup.net
Section 11 – Toxicological information
Information on the likely routes of Inhalation
exposure (inhalation, ingestion,
May be harmful if inhaled.
skin and eye contact)
Skin
May cause skin irritation.
Eye
May cause eye irritation.
Ingestion
May be harmful if swallowed.
Symptoms related to the
Not Available.
physical, chemical and
toxicological characteristics
Delayed and immediate effects
Long-term exposure to dust in excess of the PEL may result in fibrosis of the
and also chronic affects from
lung tissue.
short and long term exposure
Numerical measures of
Not Available.
toxicology (such as acute toxicity
estimates)
Section 12 – Ecological information
Ecotoxicity (aquatic and
There is no known ecological problem associated with this product.
terrestrial, where applicable)
Persistence and degradability
Not applicable.
Bioaccumulative potential
Not applicable.
Mobility in soil
Not applicable.
Other adverse effects
Not applicable.
Section 13 – Disposal information
Description of waste residues
Dispose off in accordance with local and federal regulations, using an
approved waste disposal contractor.
Information on safe handling and Spent bleaching earth should be stored in dedicated and well-ventilated
method of disposal, including the storage area.
disposal of any contaminated
packaging
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
material or in any process. Such information is, to the best of our knowledge and belief, accurate and reliable as of the date indicated.
However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to
satisfy himself/herself as to the suitability of such information for his/her own particular use.
TAIKO CLAY MARKETING SDN. BHD (429100-K)
(Incorporated in Malaysia)
Business Address:
B2-05-01, Block B2, Meritus @ Oasis Corporate Park,
No. 2, Jalan PJU 1A/2, Ara Damansara,
47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia.
Tel No. 603-7660 7716 Fax No. 603-7660 9913
Email: [email protected]
www.taikogroup.net
Section 14 – Transportation information
UN number
Not applicable.
UN proper shipment name
Not applicable.
Transport hazard class(es)
Not applicable.
Packing group, if applicable
Not applicable.
Environmental hazards (e.g.
Not applicable.
marine pollutant, Yes/No)
Transport in bulk (according to
There is no specific transportation precautions required. However, open
Annex II of MARPOL 73/78 and
vehicles should be covered to prevent products from being wetted. This
the IBC code)
product is not classified as a hazardous chemical under MALAYSIA
Occupational Safety and Health (Classification, Labelling and Safety Data
Sheet of Hazardous Chemicals) Regulations 2013.
Section 15 – Regulatory information
Safety, health and environmental International agreements of Montreal Protocol (Ozone Depleting
regulations specific for the
Substances), Stockholm Convention (Persistent Organic Pollutants),
product in question
Rotterdam Convention (Prior Informed Consent) and Basel Convention
(Hazardous Waste) do not apply to this product.
This product complies with:
1. MALAYSIA Occupational Safety and Health (Classification, Labelling
and Safety Data Sheet of Hazardous Chemicals) Regulations 2013.
2. MALAYSIA Occupational Safety and Health Act 1994.
3. FEDIOL Guidelines (Latest Revision).
Section 16 – Other information
Date of preparation of the SDS
Date of revision of the SDS
Key literature references and
sources for data used to compile
the SDS
13th February 2017.
7th Issue.
1. MALAYSIA Occupational Safety and Health (Classification,
Labelling and Safety Data Sheet of Hazardous Chemicals)
Regulations 2013.
2. MALAYSIA Occupational Safety and Health Act 1994.
Key/legend to the abbreviations
and acronyms used in the SDS
Other information deems necessary
by a supplier
3. FEDIOL Guidelines (Latest Revision).
Not Available.
Not Available.
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
material or in any process. Such information is, to the best of our knowledge and belief, accurate and reliable as of the date indicated.
However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to
satisfy himself/herself as to the suitability of such information for his/her own particular use.