Crash & Safety
Measurement System Solutions for Crash Testing
www.kistler.com
Kistler – Your Partner for Crash
Test Safety Instrumentation.
Kistler, a provider of turnkey measurement solutions for the
automobile industry, is a leading supplier of automobile crash
measurement systems.
We deliver standard and custom solutions that make a substantial
contribution to ongoing enhancement of vehicle safety and offer
complete vehicle and component crash test systems, from sensors
through to application software.
Our intelligent systems play an active part in crash test preparation, with their integral self-testing and sensor detection preventing any loss of measurement data. In-depth cooperation with
our customers and the application know-how of our engineers
lead to a continuous improvement of our off-board and indummy systems. We are committed to set the focus on customer
satisfaction and high quality solutions.
Kistler's portfolio which encompasses standard and special solutions for a wide range of crash scenarios and specifications is
enhanced by mature software packages tried and tested over the
years. Service and maintenance supported by our test equipment
management software round off the comprehensive range of
crash & safety products perfectly.
This catalogue shows a selection of the most important sensors
and systems from crash & safety testing sector. However, Kistler's
offering encompasses a wealth of other sensors, systems and custom solutions.
Further information is available from Kistler's website
www.kistler.com
or the nearest Kistler branch or distributor.
2
Fig. 1 Lower Tibia Load Cell Type M55204A...
Fig. 2 Accelerometer Type M0064B...
Fig. 3 Signal Processing Module Type M635...
www.kistler.com
Content.
www.kistler.com
In-Dummy Measurement Instrumentation
4
On-Board Measurement Instrumentation
22
Off-Board Measurement Instrumentation
26
In-Dummy Data Acquisition Systems
28
On-Board Data Acquisition Systems
33
Crash Test Software
36
3
In-Dummy Measurement Instrumentation – Load Cells.
Six-axial Neck Load Cell
Technical Data
Type M555A6A...
Measuring range
Fx / Fy / Fz
kN
9 / 9 / 13
Mx / My / Mz
N·m
280 / 280 / 280
Weight
grams
640
Data sheet
No.
M555A6A_000-790
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the upper neck of the crash test
dummies HIII-5 % (HF), HIII-50 % (H3), HIII-95 % (HM), HIII-3 year
old (Y6) and SID-IIs (S2).
Six-axial Neck Load Cell
Technical Data
Type M557A6A...
Measuring range
Fx / Fy / Fz
kN
14,2 / 14,2 / 14,2
Mx / My / Mz
N·m
450 / 450 / 450
Weight
grams
826
Data sheet
No.
M557A6A_000-779
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the lower neck of the crash test
dummies HIII-50 % (H3) and HIII-95 % (HM).
Six-axial Neck Load Cell
Technical Data
Type M56016A...
Measuring range
Fx / Fy / Fz
kN
4,45 / 4,45 / 7,1
Mx / My / Mz
N·m
225 / 225 / 140
Weight
grams
270
Data sheet
No.
M56016_003-158
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the lower neck of the crash test dummy
HIII-6 year old (Y7).
Six-axial Neck Load Cell
Technical Data
Type M56116A...
Measuring range
4
Fx / Fy / Fz
kN
13,3 / 13,3 / 13,3
Mx / My / Mz
N·m
339 / 339 / 180
Weight
grams
530
Data sheet
No.
M56116A_003-159
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, adjustable in 2,0° steps,
Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the lower neck of the crash test dummy
HIII-5 % (HF).
www.kistler.com
In-Dummy Measurement Instrumentation – Load Cells.
Six-axial Neck Load Cell
Technical Data
Type M561A6A...
Measuring range
Fx / Fy / Fz
kN
6,67 / 6,67 / 8,9
Mx / My / Mz
N·m
340 / 340 / 225
Weight
grams
1 250
Data sheet
No.
M561A6A_000-938
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, adjustable in 1,8° steps,
Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the lower neck of the crash test
dummies HIII-50 % (H3), HIII-95 % (HM) and FAA-HIII-50 %.
Six-axial Neck Load Cell
Technical Data
Type M55556A...
Measuring range
Fx / Fy / Fz
kN
10 / 10 / 12
Mx / My / Mz
N·m
300 / 300 / 200
Weight
grams
357
Data sheet
No.
M55556A_000-963
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1;
cable outlet 45° angle (upper neck) and 90° angle (lower neck).
Measures forces and mo­ments in the neck of the WorldSID-5 % (W5)
and WorldSID-50 % (WS) crash test dummy.
Six-axial Neck Load Cell
Technical Data
Type M55696A...
Measuring range
Fx / Fy / Fz
kN
13,3 / 13,3 / 13,3
Mx / My / Mz
N·m
452 / 452 / 226
Weight
grams
795
Data sheet
No.
M55696A_003-223
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the lower neck of the dummy Thor-M
(TH).
Six-axial Neck and Lumbar Spine Load Cell
Technical Data
Type M585A6A...
Measuring range
www.kistler.com
Fx / Fy / Fz
kN
0,9 / 0,9 / 2
Mx / My / Mz
N·m
56 / 56 / 34
Weight
grams
120
Data sheet
No.
M585A6A_000-854
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the upper neck and the lumbar spine of
the P1 1/2 year old (P2) and Crabi dummy.
5
In-Dummy Measurement Instrumentation – Load Cells.
Six-axial Neck Load Cell
Technical Data
Type M55526A...
Measuring range
Fx / Fy / Fz
kN
10 / 10 / 15
Mx / My / Mz
N·m
280 / 280 / 280
Weight
grams
600
Data sheet
No.
M55526A_000-950
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the neck of the crash test dummy
EuroSID-2 with Rib Extension (ER).
Six-axial Upper Neck Load Cell
Technical Data
Type M55596A...
Measuring range
Fx / Fy / Fz
kN
8,9 / 8,9 / 13,3
Mx / My / Mz
N·m
284 / 284 / 284
Weight
grams
462
Data sheet
No.
M55596A_003-226
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the upper neck of the crash test dummy
Thor-M (TH).
Six-axial Lower Neck Load Cell
Technical Data
Type M556A6A...
Measuring range
Fx / Fy / Fz
kN
12 / 12 / 14
Mx / My / Mz
N·m
450 / 450 / 300
Weight
grams
1 111
Data sheet
No.
M556A6A_000-951
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the lower neck of the crash test dummies EuroSID-1 (E1) and EuroSID-2 with Rib Extension (ER).
Six-axial Lower Neck Load Cell
Technical Data
Type M55616A...
Measuring range
6
Fx / Fy / Fz
kN
11 / 11 / 11
Mx / My / Mz
N·m
340 / 340 / 225
Weight
grams
525
Data sheet
No.
M55616A_000-982
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the lower neck of the SID-IIs (S2) crash
test dummy.
www.kistler.com
In-Dummy Measurement Instrumentation – Load Cells.
Six-axial Upper / Lower Neck Load Cell
Technical Data
Type M55636A...
Measuring range
Fx / Fy / Fz
kN
5 / 5 / 6
Mx / My / Mz
N·m
150 / 150 / 80
Weight
grams
120
Data sheet
No.
M55636A_000-796
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the upper and / or lower neck of the
crash test dummies Q1, Q1.5, Q3, Q6.
Six-axial Upper Neck Load Cell
Technical Data
Type M55646A...
Measuring range
Fx / Fy / Fz
kN
13,3 / 13,3 / 17,8
Mx / My / Mz
N·m
450 / 450 / 240
Weight
grams
250
Data sheet
No.
M55646A_003-118
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), high ca­pacity, UPS module, low linearity
errors and hysteresis, Kistler system cabling, polarities according to
SAE J211/1.
Measures forces and moments in the neck of the crash test dummies Q0
to QA.
Skull Spring Load Cell
Technical Data
Type M55191A...
Measuring range
kN
4,45
Sensitivity (typ.)
μV/V/kN
700
Insulation resistance
GΩ
>10
Weight
grams
10
Data sheet
No.
M55191A_003-211
Description
Measuring range 4,45 kN, UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures the skull spring force of the crash test dummy Thor-M (TH).
Triaxial Shoulder Load Cell
Technical Data
Type M536A3A...
Measuring range
Fx /Fy /Fz
www.kistler.com
kN
4 / 8 / 4
Insulation resistance
GΩ
>10
Weight
grams
215
Data sheet
No.
M536A3A_000-785
Description
Triaxial (Fx, Fy, Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the shoulder of the crash test dummies EuroSID-1 (E1)
and EuroSID-2 with Rib Extension (ER).
7
In-Dummy Measurement Instrumentation – Load Cells.
Triaxial Shoulder Load Cell
Technical Data
Type M53633A...
Measuring range
kN
4,5 / 4,5 / 4,5
Insulation resistance
Fx / Fy / Fz
GΩ
>10
Weight
grams
60
Data sheet
No.
M53633A_000-791
Description
Triaxial (Fx, Fy, Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the shoulder of the crash test dummy SID-IIs (S2).
Triaxial Shoulder Load Cell
Technical Data
Type M53643A...
Measuring range
kN
5 / 10 / 5
Insulation resistance
Fx / Fy / Fz
GΩ
>10
Weight
grams
177
Data sheet
No.
M53643A_000-964
Description
Triaxial (Fx, Fy, Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the shoulder of the WorldSID-50 % (WS) crash test
dummy.
Triaxial Shoulder Load Cell
Technical Data
Type M53653A...
Measuring range
kN
4 / 5 / 4
Insulation resistance
Fx / Fy / Fz
GΩ
>10
Weight
grams
55
Data sheet
No.
M53653A_003-078
Description
Triaxial (Fx, Fy, Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the shoulder of the WorldSID-5 % (W5) crash test
dummy.
Four-axial Clavicle Load Cell
Technical Data
Type M53894A...
Measuring range
Fx (M) / Fz (M) / Fx (L) / Fz (L)
8
kN
2 / 2 / 2 / 2
Insulation resistance
GΩ
>10
Weight
grams
320
Data sheet
No.
M53894A_003-214
Description
Four-axial (Fx (M), Fz (M), Fx (L), Fz (L)), UPS module, low linearity errors
and hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the clavicle of the crash test dummy
Thor-M (TH).
www.kistler.com
In-Dummy Measurement Instrumentation – Load Cells.
Four-axial Back Plate Load Cell
Technical Data
Type M540A4A...
Measuring range
Fx / Fy
kN
3 / 3
My / Mz
N·m
160 / 160
Weight
grams
3 100
Data sheet
No.
M540A4A_000-777
Description
Four-axial (Fx, Fy, My, Mz), UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments between back plate and thoracic spine in
the crash test dummy EuroSID-2 (E2).
Four-axial Back Plate Load Cell
Technical Data
Type M54014A...
Measuring range
Fx / Fy
kN
3 / 3
My / Mz
N·m
160 / 160
Weight
grams
3 100
Data sheet
No.
M54014A_000-780
Description
Four-axial (Fx, Fy, My, Mz), UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments between back plate and thoracic spine in
the crash test dummy EuroSID-2 with Rib Extension (ER).
Uniaxial Abdomen Load Cell
Technical Data
Type M530A1B...
Measuring range
kN
5
Sensitivity (typ.)
mV/V/kN
600
Insulation resistance
GΩ
>10
Weight
grams
204
Data sheet
No.
M530A1B_000-968
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures forces in the ab­domen of the crash test dummies EuroSID-1
(E1) and EuroSID-2 with Rib Extension (ER).
Five-axial Thoracic Spine Load Cell
Technical Data
Type M564A5A...
Measuring range
www.kistler.com
Fx / Fy / Fz
kN
13,3 / 13,3 / 20
Mx / My
N·m
638 / 893
Weight
grams
1 078
Data sheet
No.
M564A5A_000-984
Description
Five-axial (Fx, Fy, Fz, Mx, My), UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the thoracic spine of the dummies HIII50 % (H3), HIII-95 % (HM), Thor-M (TH) and Polar.
9
In-Dummy Measurement Instrumentation – Load Cells.
Five-axial Thoracic Spine Load Cell
Technical Data
Type M56495A...
Measuring range
Fx / Fy / Fz
kN
13,35 / 13,35 / 17,8
Mx / My
N·m
680 / 900
Weight
grams
1 013
Data sheet
No.
M56495A_003-210
Description
Five-axial (Fx, Fy, Fz, Mx, My), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the thoracic spine of the crash test
dummy Thor-M (TH).
Triaxial Lumbar Spine Load Cell
Technical Data
Type M537A3A...
Measuring range
Fy / Fz
kN
13,5 / 13,5
Mx
N·m
550
Weight
grams
662
Data sheet
No.
M537A3A_000-949
Description
Triaxial (Fy, Fz, Mx), UPS module, low linearity errors and hysteresis,
Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments of the lumbar spine of the crash test
dummies EuroSID-1 (E1) and EuroSID-2 (E2).
Four-axial Lumbar Spine Load Cell
Technical Data
Type M53764A...
Measuring range
Fy / Fz
kN
14 / 14
Mx / My
N·m
1 000 / 1 000
Weight
grams
500
Data sheet
No.
M53764A_000-786
Description
Four-axial (Fx, Fy, Mx, My), UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the lumbar spine of the crash test dummy EuroSID-2 with Rib Extension (ER).
Triaxial Lumbar Spine Load Cell
Technical Data
Type M562A3A...
Measuring range
10
Fx / Fz
kN
13,35 / 13,35
My
N·m
565
Weight
grams
660
Data sheet
No.
M562A3A_003-164
Description
Triaxial (Fx, Fz, My), UPS module, low linearity errors and hysteresis,
Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the lumbar spine of the crash test dummies HIII-50 % (H3) and HIII-95 % (HM).
www.kistler.com
In-Dummy Measurement Instrumentation – Load Cells.
Triaxial Lumbar Spine Load Cell
Technical Data
Type M573A3A...
Measuring range
Fx / Fz
kN
13,3 / 17,8
My
N·m
680
Weight
grams
990
Data sheet
No.
M573AxA_003-161
Description
Triaxial (Fx, Fz, My), UPS module, low linearity errors and hysteresis,
Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the lumbar spine of the HIII-5 % (HF)
crash test dummy.
Five-axial / Six-axial Lumbar Spine Load Cell
Technical Data
Type M573A5A...
Type M573A6A...
Measuring range
Fx / Fy / Fz
kN
13,3 / 13,3 / 17,8
13,3 / 13,3 / 17,8
Mx / My / Mz1)
N·m
680 / 680
680 / 680 / 340
Weight
grams
990
990
Data sheet
No.
M573AxA_003-161
M573AxA_003-161
Description
Five-axial (Fx, Fy, Fz, Mx, My) rsp. six-axial (Fx, Fy, Fz, Mx, My, Mz),
UPS module, low linearity errors and hysteresis, Kistler system cabling,
polarities according to SAE J211/1. Measures forces and moments in the
lumbar spine of the HIII-5 % (HF) crash test dummy.
1)
Only with six-axial version
Six-axial Lumbar Spine Load Cell
Technical Data
Type M56216A...
Measuring range
Fx / Fy / Fz
kN
15 / 15 / 20
Mx / My / Mz
N·m
600 / 600 / 350
Weight
grams
7 200
Data sheet
No.
M56216A_000-837
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the lumbar spine of the crash test dummies HIII-50 % (H3) and HIII-95 % (HM).
Six-axial Lumbar Spine Load Cell
Technical Data
Type M563A6A...
Measuring range
www.kistler.com
Fx / Fy / Fz
kN
4,45 / 4,45 / 6,7
Mx / My / Mz
N·m
170 / 170 / 113
Weight
grams
220
Data sheet
No.
M563A6A_003-160
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the lumbar spine of the crash test
dummy HIII-3 year old (Y6).
11
In-Dummy Measurement Instrumentation – Load Cells.
Six-axial Lumbar Spine Load Cell
Technical Data
Type M568A6A...
Measuring range
Fx / Fy / Fz
kN
4,45 / 4,45 / 7,1
Mx / My / Mz
N·m
240 / 240 / 150
Weight
grams
570
Data sheet
No.
M568A6A_000-939
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the lumbar spine of the crash test
dummy HIII-6 year old (Y7).
Six-axial Lumbar Spine Load Cell
Technical Data
Type M56816A...
Measuring range
Fx / Fy / Fz
kN
13,3 / 13,3 / 13,3
Mx / My / Mz
N·m
450 / 450 / 225
Weight
grams
1 066
Data sheet
No.
M56816A_000-983
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the lumbar spine of the SID-IIs (S2)
crash test dummy.
Six-axial Lumbar Spine Load Cell
Technical Data
Type M56826A...
Measuring range
Fx / Fy / Fz
kN
10 / 10 / 12
Mx / My / Mz
N·m
300 / 300 / 200
Weight
grams
475
Data sheet
No.
M56826A_000-975
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and moments in the lumbar spine of the dummies
WorldSID-5 % (W5) and WorldSID-50 % (WS).
Twelve-axial Sacroiliac Load Cell
Technical Data
Type M5670BA...
Measuring range
Fx / Fy / Fz (left and right each)
kN
Mx / My / Mz (left and right each) N·m
12
6 / 12 / 6
800 / 400 / 400
Weight
grams
1 070
Data sheet
No.
M5670BA_000-965
Description
Twelve-axial (Fx, Fy, Fz, Mx, My, Mz, left and right each), UPS module,
low linearity errors and hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the sacroiliac of the WorldSID-5 %
(W5) and WorldSID-50 % (WS) crash test dummy.
www.kistler.com
In-Dummy Measurement Instrumentation – Load Cells.
Biaxial Iliac Wing Load Cell
Technical Data
Type M52202A...
Type M52212A...
Measuring range
Fx
kN
8,9
8,9
My
N·m
225
225
Weight
grams
530
530
Data sheet
No.
M522x2A_003-185
M522x2A_003-185
Description
Biaxial (Fx, My), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures left (Type M52202A...) and right (Type M52212A...) forces on
the ASIS iliac wing of the crash test dummy HIII-5 % (HF).
Biaxial ASIS Iliac Wing Load Cell
Technical Data
Type M52242A...
Type M52252A...
Measuring range
Fx1
kN
18
18
Fx2
kN
18
18
Weight
grams
695
695
Data sheet
No.
M522x2A_003-242
M522x2A_003-242
Description
Biaxial (Fx1, Fx2), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures left (Type M52242A...) and right (Type M52252A...) forces on
the ASIS iliac wing of the crash test dummy HIII-95 % (HM).
Biaxial ASIS Iliac Wing Load Cell
Technical Data
Type M52292A...
Measuring range
Fx
kN
13
My
N·m
320
Weight
grams
220
Data sheet
No.
M52292A_003-215
Description
Biaxial (Fx, My), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces and moments on the ASIS iliac wing of the crash test
dummy Thor-M (TH).
Uniaxial Iliac Wing Load Cell
Technical Data
www.kistler.com
Type M57611A...
Measuring range
kN
13,5
Sensitivity (typ.)
μV/V/kN
150
Insulation resistance
GΩ
>10
Weight
grams
251
Data sheet
No.
M57611A_000-794
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures sideward forces in the pelvis iliac wing of the crash test dummy
SID-IIs (S2).
13
In-Dummy Measurement Instrumentation – Load Cells.
Uniaxial Acetabulum Load Cell
Technical Data
Type M52811A...
Measuring range
kN
8,9
Sensitivity (typ.)
μV/V/kN
108
Insulation resistance
GΩ
>10
Weight
grams
131
Data sheet
No.
M52811A_000-792
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures forces in the acetabulum of the crash test dummy SID-IIs (S2).
Triaxial Acetabulum Load Cell
Technical Data
Type M52893A...
M52993A...
Measuring range
kN
22,24 / 13,34 / 13,34
22,24 / 13,34 / 13,34
Insulation resistance
Fx / Fy / Fz
GΩ
>10
>10
Weight
grams
425
425
Data sheet
No.
M52x93A_003-224
M52x93A_003-224
Description
Triaxial (Fx, Fy, Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces and moments on the left (Type M52893A...) and right
(Type M52993A...) acetabulum area of the Thor-M (TH) crash test
dummy.
Uniaxial Pubic Load Cell
Technical Data
Type M50241A...
Measuring range
kN
12
Sensitivity (typ.)
μV/V/kN
190
Insulation resistance
GΩ
>10
Weight
grams
135
Data sheet
No.
M50241A_000-974
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures the pubic force of the crash test dummies WorldSID-5 % (W5)
and WorldSID-50 % (WS).
Uniaxial Pubic Load Cell
Technical Data
14
Type M531A1A...
Measuring range
kN
20
Sensitivity (typ.)
μV/V/kN
125
Insulation resistance
GΩ
>10
Weight
grams
127
Data sheet
No.
M531A1A_000-784
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures the pubic force of the crash test dummies EuroSID-1 (E1) and
EuroSID-2 with Rib Extension (ER).
www.kistler.com
In-Dummy Measurement Instrumentation – Load Cells.
Uniaxial Pubic Load Cell
Technical Data
Type M53111A...
Measuring range
kN
8,9
Sensitivity (typ.)
μV/V/kN
135
Insulation resistance
GΩ
>10
Weight
grams
75
Data sheet
No.
M53111A_000-793
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures the pubic force of the crash test dummy SID-IIs (S2).
Six-axial Femur Load Cell
Technical Data
Type M56506A...
Measuring range
Fx / Fy / Fz
kN
15 / 15 / 15
Mx / My / Mz
N·m
350 / 350 / 200
Weight
grams
480
Data sheet
No.
M56506A_000-977
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the femur of the crash test dummy
WorldSID-50 % (WS).
Six-axial Arm / Femur Load Cell
Technical Data
Type M56516A...
Measuring range
Fx / Fy / Fz
kN
9,0 / 9,0 / 13,5
Mx / My / Mz
N·m
225 / 225 / 170
Weight
grams
372
Data sheet
No.
M56516A_003-094
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the arm of the dummy WorldSID-50 %
and in the femur of the dummy WorldSID-5 % (W5).
Uniaxial Femur Load Cell
Technical Data
www.kistler.com
Type M501A1A...
Measuring range
kN
6,7
Sensitivity (typ.)
μV/V/kN
230
Insulation resistance
GΩ
>10
Weight
grams
283
Data sheet
No.
M501A1A_003-150
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures forces in the femur of the crash test dummy HIII-6 year old
(Y7).
15
In-Dummy Measurement Instrumentation – Load Cells.
Uniaxial Femur Load Cell
Technical Data
Type M505A1A...
Measuring range
kN
13,5
Sensitivity (typ.)
μV/V/kN
104
Insulation resistance
GΩ
>10
Weight
grams
635
Data sheet
No.
M505A1A_000-781
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures forces in the femur of the crash test dummies HIII-5 % (HF),
HIII-50 % (H3) and HIII-95 % (HM).
Six-axial Femur Load Cell
Technical Data
Type M506A6A...
Measuring range
Fx / Fy / Fz
kN
13,3 / 13,3 / 22,2
Mx / My / Mz
N·m
340 / 340 / 340
Weight
grams
998
Data sheet
No.
M506A6A_000-795
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the femur of the crash test dummies
HIII-5 % (HF), HIII-50 % (H3), HIII-95 % (HM) and SID-IIs (S2).
Six-axial Femur Load Cell
Technical Data
Type M50616A...
Measuring range
Fx / Fy / Fz
kN
13,3 / 13,3 / 22,2
Mx / My / Mz
N·m
340 / 340 / 340
Weight
grams
853
Data sheet
No.
M50616A_000-782
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the femur of the crash test dummies
EuroSID-1 (E1) and EuroSID-2 with Rib Extention (ER).
Six-axial Femur Load Cell
Technical Data
Type M50626A...
Measuring range
16
Fx / Fy / Fz
kN
3,35 / 3,35 / 6,7
Mx / My / Mz
N·m
112 / 112 / 56
Weight
grams
~312
Data sheet
No.
M50626A_003-112
Description
Six-axial (Fx, Fy, Fz, Mx, My, Mz), UPS module, low linearity errors and
hysteresis, Kistler system cabling, polarities according to SAE J211/1.
Measures forces and mo­ments in the femur of the crash test dummy
HIII-6 year old (Y7).
www.kistler.com
In-Dummy Measurement Instrumentation – Load Cells.
Triaxial Femur and Femoral Neck Load Cell
Technical Data
Type M53903A...
Measuring range
kN
10 / 25 / 10
Insulation resistance
Fx / Fy / Fz
GΩ
>10
Weight
grams
238
Data sheet
No.
M53903A_000-976
Description
Triaxial (Fx, Fy, Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the femur and femoral neck of the crash test dummy
WorldSID-50 % (WS).
Triaxial Femur and Femoral Neck Load Cell
Technical Data
Type M53923A...
Measuring range
kN
10 / 25 / 10
Insulation resistance
Fx / Fy / Fz
GΩ
>10
Weight
grams
181
Data sheet
No.
M53923A_003-079
Description
Triaxial (Fx, Fy, Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the femur and femoral neck of the crash test dummy
WorldSID-5 % (W5).
Uniaxial Knee Contact Load Cell
Technical Data
Type M55141A...
Measuring range
kN
20
Sensitivity (typ.)
μV/V/kN
104
Insulation resistance
GΩ
>10
Weight
grams
80
Data sheet
No.
M55141A_003-176
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1.
Measures forces in the knee of the crash test dummy WorldSID-50 %
(WS).
Four-axial / Five-axial Upper Tibia Load Cell
Technical Data
Type M55214x...
Type M55215x...
Measuring range
Fx / Fy1) / Fz
kN
11 / 11
11 / 11 / 11
Mx / My
N·m
400 / 400
400 / 400
Weight
grams
450
450
Data sheet
No.
M55214A_000-789
M55214A_000-789
Description
Four-axial (Fx, Fz, Mx, My) rsp. five-axial (Fx, Fy, Fz, Mx, My), UPS module,
low linearity errors and hysteresis, Kistler system cabling, polarities acc. to
SAE J211/1.
Measures forces and mo­ments in the upper tibia of the crash test dummies HIII-5 % (HF), HIII-50 % (H3), HIII-95 % (HM) and SID-IIs (S2).
1)
www.kistler.com
Only five-axial version
17
In-Dummy Measurement Instrumentation – Load Cells.
Biaxial Knee Clevis Load Cell
Technical Data
Type M55102A...
Measuring range (2xFz)
kN
2x6,8
Sensitivity (typ.)
μV/V/kN
2x220
Insulation resistance
GΩ
>10
Weight
grams
470
Data sheet
No.
M551x2A_003-137
Description
Biaxial (2xFz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the knee clevis of the crash test dummy HIII-5 %
(HF).
Biaxial Knee Clevis Load Cell
Technical Data
Type M55112A...
Measuring range (2xFz)
kN
2x8,9
Sensitivity (typ.)
μV/V/kN
2x200
Insulation resistance
GΩ
>10
Weight
grams
580
Data sheet
No.
M551x2A_003-137
Description
Biaxial (2 x Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the knee clevis of the crash test dummy HIII-50 %
(H3).
Biaxial Knee Clevis Load Cell
Technical Data
Type M55122A...
Measuring range (2xFz)
kN
2x8,9
Sensitivity (typ.)
μV/V/kN
2x200
Insulation resistance
GΩ
>10
Weight
grams
630
Data sheet
No.
M551x2A_003-137
Description
Biaxial (2 x Fz), UPS module, low linearity errors and hysteresis, Kistler
system cabling, polarities according to SAE J211/1.
Measures forces in the knee clevis of the crash test dummy HIII-95 %
(HM).
Five-axial Lower Tibia Load Cell
Technical Data
Type M55155A...
Measuring range
18
Fx / Fy / Fz
kN
11 / 11 / 11
Mx / My
N·m
400 / 400
Weight
grams
500
Data sheet
No.
M55155A_000-966
Description
Five-axial (Fx, Fy, Fz, Mx, My), UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities acc. to SAE J211/1.
Measures forces and mo­ments in the lower tibia of the crash test dummies Thor and MIL-LX.
www.kistler.com
In-Dummy Measurement Instrumentation – Load Cells.
Five-axial Upper Tibia Load Cell
Technical Data
Type M55235A...
Measuring range
Fx / Fy / Fz
kN
11 / 11 / 11
Mx / My
N·m
400 / 400
Weight
grams
500
Data sheet
No.
M55235A_000-967
Description
Five-axial (Fx, Fy, Fz, Mx, My), UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities acc. to SAE J211/1.
Measures forces and mo­ments in the upper tibia of the crash test dummies Thor-M (TH) and Thor-LX.
Four-axial / Five-axial Lower Tibia Load Cell
Technical Data
Type M55204x...
Type M55205x...
Measuring range
Fx / Fy1) / Fz
kN
11 / 11
11 / 11 / 11
Mx / My
N·m
400 / 400
400 / 400
Weight
grams
490
490
Data sheet
No.
M55204A_000-788
M55204A_000-788
Description
Four-axial (Fx, Fz, Mx, My) rsp. five-axial (Fx, Fy, Fz, Mx, My), UPS module,
low linearity errors and hysteresis, Kistler system cabling, polarities acc. to
SAE J211/1.
Measures forces and mo­ments in the lower tibia of the crash test dummies HIII-5 % (HF), HIII-50 % H3) and HIII-95 % (HM).
1)
Only five-axial version
Five-axial Upper Tibia Load Cell
Technical Data
Type M55295A...
Measuring range
Fx / Fy / Fz
kN
11 / 11 / 11
Mx / My
N·m
400 / 400
Weight
grams
460
Data sheet
No.
M55295A_003-208
Description
Five-axial (Fx, Fy, Fz, Mx, My), UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities acc. to SAE J211/1.
Measures forces and mo­ments in the upper tibia of the dummies ThorM (TH) and Thor-LX.
Five-axial Lower Tibia Load Cell
Technical Data
Type M55395A...
Measuring range
www.kistler.com
Fx / Fy / Fz
kN
11 / 11 / 11
Mx / My
N·m
400 / 400
Weight
grams
524
Data sheet
No.
M55395A_003-209
Description
Five-axial (Fx, Fy, Fz, Mx, My), UPS module, low linearity errors and hysteresis, Kistler system cabling, polarities acc. to SAE J211/1.
Measures forces and mo­ments in the lower tibia of the dummies ThorM (TH) and Thor-LX.
19
In-Dummy Measurement Instrumentation – Load Cells.
Uniaxial Achilles Tendon Load Cell
Technical Data
20
Type M55491A...
Measuring range (2xFz)
kN
4,45
Sensitivity (typ.)
μV/V/kN
~300
Insulation resistance
GΩ
10
Weight
grams
25
Data sheet
No.
M55491A_003-225
Description
Uniaxial, UPS module, low linearity errors and hysteresis, Kistler system
cabling, polarities according to SAE J211/1
Measures the force in the Achilles tendon of the Thor-M (TH) crash test
dummy.
www.kistler.com
In-Dummy Measurement Instrumentation – Accelerometers.
Uniaxial, Piezoresistive Accelerometer
Technical Data
Type M0040A00-2000
Measuring range
g
±2 000
Sensitivity @ 10 VDC excitation
mV/g
0,075
Natural frequency
Hz
>10 000
Damping ratio, typ.
0,7
Data sheet
No.
M0040A_003-095
Description
Built-in mechanical stops, anodized aluminium alloy housing, flexible
cable output. Used in safety crash testing (auto, truck, recreational
vehicles, shock testing).
Uniaxial, Piezoresistive Accelerometer
Technical Data
Type M0064B00-2000
Measuring range
g
±2 000
Sensitivity
mV/g
0,15
Resonant frequency
Hz
26 000
Damping ratio, typ.
0,05
Data sheet
No.
M0064B_003-099
Description
Outstanding shock survivability, flat amplitude, phase response up to
7 kHz. Used in safety crash testing (auto, truck, recreational vehicles,
shock testing).
Uniaxial, Piezoresistive Accelerometer
Technical Data
Type M0064C00-2000
Measuring range
g
±2 000
Sensitivity
mV/g
0,15
Resonant frequency
Hz
26 000
Damping ratio, typ.
0,05
Data sheet
No.
M0064C_003-100
Description
Outstanding shock survivability, flat amplitude, phase response up to
7 kHz. Used in safety crash testing (auto, truck, recreational vehicles,
shock testing).
Triaxial Accelerometer
Technical Data
Type M0068C00-2000
Measuring range
g
±2 000
Sensitivity
mV/g
0,15
Resonant frequency
Hz
26 000
Damping ratio, typ.
www.kistler.com
0,05
Data sheet
No.
M0068C_003-101
Description
Three replaceable sensing modules with mechanical overload stops, high
shock protection. Used in automotive crash testing, impact testing, offroad testing, road testing, dummy instrumentation.
21
On-Board Measurement Instrumentation – Accelerometers.
Uniaxial, Piezoresistive Accelerometer
Technical Data
Type M0052F00-0500
Type M0052F00-2000
Measuring range
g
±500
±2 000
Sensitivity
mV/g
0,4
0,15
Resonant frequency
Hz
15 000
26 000
Shock limit
g
5 000
5 000
Data sheet
No.
M0052F_003-096
M0052F_003-096
Description
Full bridge output, gas-damped, outstanding shock survivability, easy to
mount in hard to reach places on vehicles under test. Used in safety crash
testing, high impact research, biomechanical studies, blast testing.
Uniaxial, Piezoresistive Accelerometer
Technical Data
Type M0052M30-0500
Type M0052M30-2000
Measuring range
g
±500
±2 000
Sensitivity
mV/g
0,4
0,15
Resonant frequency
Hz
15 000
26 000
Shock limit
g
5 000
5 000
Data sheet
No.
M0052M30_003-097
M0052M30_003-097
Description
Full bridge output, gas-damped, outstanding shock survivability,
easy mounting. Used in safety crash testing, high impact research,
biomechanical studies, shock testing.
Triaxial, Gas-damped Accelerometer
Technical Data
Type M0053A00-0500
Type M0053A00-2000
Measuring range
g
±500
±2 000
Sensitivity
mV/g
0,4
0,15
Resonant frequency
Hz
15 000
26 000
0,3
0,05
M0053A00_003-098
M0053A00_003-098
Damping ratio, typ.
Data sheet
No.
Description
Gas-damped MEMS sensing elements, mechanical stops for high
overload protection, easy mounting. Used in safety crash testing, impact
testing, off road testing, vehicle testing.
Triaxial, Gas-damped Accelerometer
Technical Data
Type M0301A00-1000
Type M0301A00-2000
Measuring range
g
±1 000
±2 000
Sensitivity
mV/g
0,15
0,13
Resonant frequency
Hz
20 000
23 000
0,05
0,05
M0301A00_003-186
M0301A00_003-186
Damping ratio, typ.
22
Data sheet
No.
Description
Gas-damped MEMS sensing elements, mechanical stops for high
overload protection, easy mounting. Used in safety crash testing, impact
testing, off road testing, vehicle testing.
www.kistler.com
On-Board Measurement Instrumentation – Accelerometers.
Uniaxial, Gas-damped Accelerometer
Technical Data
Type M1200M30-0500
Type M1200M30-1000
Measuring range
g
±500
±1 000
Sensitivity
mV/g
0,40
0,15
Resonant frequency
Hz
6 000
7 000
0,3
0,1
M1200M30_003-102
M1200M30_003-102
Damping ratio, typ.
Data sheet
No.
Description
Mechanical overload stops provide high shock protection, easy mounting
in hard to get places on vehicles. Used in crash testing, impact testing,
off-road testing, transportation testing.
Uniaxial, Gas-damped Accelerometer
Technical Data
Type M1201F-0500
M1201F-1000
Measuring range
g
±500
±1 000
Sensitivity
mV/g
0,40
0,15
Resonant frequency
Hz
6 000
7 000
0,3
0,1
M1201F_003-103
M1201F_003-103
Damping ratio, typ.
Data sheet
No.
Description
High shock protection in rugged applications, easy mounting in hard
to get places on vehicles under test. Used in crash testing, crush zone
testing, impact testing, off-road testing, transportation testing.
Triaxial, Gas-damped Accelerometer
Technical Data
M1203A00-0500
M1203A00-1000
Measuring range
g
±500
±1 000
Sensitivity
mV/g
0,40
0,15
Resonant frequency
Hz
6 000
7 000
0,3
0,1
M1203A_003-104
M1203A_003-104
Damping ratio, typ.
Data sheet
No.
Description
Mechanical overload stops provide high shock protection, easy mounting
in hard to get places on vehicles. Used in crash testing, vehicle testing,
impact testing, off-road testing, transportation testing.
Uniaxial Accelerometer
Technical Data
Type M0101A00
Measuring range
g
±1 000
Sensitivity (min. / max.)
mV/g
0,12 / 0,30
Frequency response, ±5 %
Hz
0 ... 3 000
Damping ratio, typ.
www.kistler.com
0,15
Data sheet
No.
M0101A_003-114
Description
Overload stops provide high shock protection in rugged applications;
easy mounting in hard to get places on vehicles. Used in crash testing,
impact testing, off-road testing and transportation testing.
23
On-Board Measurement Instrumentation – Sensors.
Current and Current Pulse Sensor. Indirect Measurement of Amperage
Technical Data
Type M703A...
Type M703B...
Measuring range (typ.)
Overload 30 A (Type ...SI2)
A
±15
±15
Overload 50 A (Type ...SI3)
A
±30
±30
Overload 80 A (Type ...SI5)
A
±50
±50
Overload 200 A (Type ...SI1)
A
±100
±100
at 10 V
mV/A
37 / 20 / 50
at 15 V
mV/A
Sensitivity (typ. / min. / max.)
18 / 10 / 30
Wire diameter
mm
2,7 ... 3
2,7 ... 3
Data sheet
No.
M703_000-833
M703_000-833
Description
Based upon the hall measuring principle; enables the indirect measuring
of amperage in a wire. Chronological detection of trigger occurrences
in component or crash tests as well as controlling the amperage in the
cables in case of a crash.
Current and Current Pulse Sensor. Indirect Measurement of Amperage
Technical Data
Type M705A...
Measuring range (typ.)
Overload 30 A (Type ...SI2)
A
±15
Overload 50 A (Type ...SI3)
A
±30
Overload 80 A (Type ...SI5)
A
±50
Overload 200 A (Type ...SI1)
A
±100
mV/A
37 / 20 / 50
Sensitivity (typ. / min. / max.)
at 10 V
Wire diameter
mm
4,5 ... 5
Data sheet
No.
M705_000-834
Description
Based upon the hall measuring principle; enables the indirect measuring
of amperage in a wire. Chronological detection of trigger occurrences
in component or crash tests as well as controlling the amperage in the
cables in case of a crash.
Current and Current Pulse Sensor. Indirect Current Measurement
Technical Data
Type M715A...
Measuring range (typ.)
Overload 400 A
A
±300
mV/A
12 / 8 / 15
Sensitivity (typ. / min. / max.)
at 10 V
24
Wire diameter
mm
13,5 ... 15
Data sheet
No.
M715A_000-896
Description
Based upon the hall measuring principle; enables the indirect measuring
of amperage in a wire. The sensor is used for measuring current during
durability tests of e.g. battery connections.
www.kistler.com
On-Board Measurement Instrumentation – Sensors.
High-voltage Signal Processing Module
Technical Data
Type M635A...
Input voltage
V
±1 000
Output voltage
V
±2,5
Output DC voltage potential
V
5
Sensitivity amplification (typ.)
mV/V
2,5
Data sheet
No.
M635A_000-755
Description
Input voltage ±1 000 V, galvanic isolation up to 1 500 V, shock resistant
up to 200 g, band width up to 10 kHz, ID module integrable. Used in
crash measuring technique for potentialfree measuring of voltages up to
1 000 V.
Uniaxial, Resistive Webbing Load Cell
Technical Data
Type M51111A...
www.kistler.com
Type M51111A...
Type M51111B...
Measuring range
kN
16
16
Sensitivity
μV/V/kN
130
130
Insulation resistance
GΩ
>10
>10
Weight
grams
76
70
Data sheet
No.
M51111_000-759
M51111_000-759
Description
Light-weight, low linearity error, easy replaceable cable solution, UPS
module inside load cell optionally available. Calibration conforming to
ISO 17272 (polynominal and linear regression). Designed to measure
seat belt forces during a crash test with negligible impact on the belt's
performance. Right-angled cable outlet (Type M51111A...) rsp. straight
cable outlet (Type M51111B...).
25
Off-Board Measurement Instrumentation – Multicomponent Force Systems.
Small Overlap Barrier
Technical Data
Type
9661B40
Fx
kN
0 ... 5001)
Fy
kN
–100 ... 100
Fz
kN
–100 ... 100
My
kN·m
on request
Mz
kN·m
on request
%
≤±0,5
x → y, z
%
≤±1,0 [≤±0,3]
z↔y
%
≤±1,0 [≤±0,3]
y, z → x
%
≤±1,0 [≤±0,3]
x → y, z
%
≤±1,0 [≤±0,3]2)
z↔y
%
≤±1,0 [≤±0,3]2)
y, z → x
%
≤±1,0 [≤±0,3]2)
°C
0 ... 40
Measuring range, related to the
nominal sensor sensitivity
Linearity (FSO)
Crosstalk (FSO) – [typ. values]
Crosstalk (FSO) – [typ. values]
Operating temperature range
Natural frequency of crash force
element alone
Fx
Hz
≈4 000
Fy, Fz
Hz
≈1 700
Protection (IEC)
IP65
Material
Crash element
1.2316+S
Segment base plate:
Ck45 chemically
nickel-plated
Data sheet
on request
Description
1)
2)
26
A SmartCrash® overlap segment (650x1 000 mm) consists of 32
SmartCrash standard elements Type 9350B1 (125x125 mm) and of 8
SmartCrash corner elements Type 9359B1 (125x125 mm x R150). Its
dimensions and the number of crash force elements can be tailored to
the customer‘s technical requirements. Each individual crash force element measures the 3 orthogonal forces Fx, Fy and Fz. The piezoelectric
measuring elements in the force sensor output yield a force-proportional charge, which is amplified and processed. The SmartCrash overlap
segment is used vertically in the automotive industry and in vehicle
crash test centers with an overlap of 25 %.
Limited by angle elements
After correction of crosstalk by inversal matrix method
www.kistler.com
Off-Board Measurement Instrumentation – Multicomponent Force Systems.
Modular Triaxial SmartCrash® Barrier
Technical Data
Type
9655AQ...
Fx
kN
0 ... 500
Fy / Fz
kN
±100
m
2x1x1,205
Measuring range
Dimensions (LxWxH) 1)
Rental possibilities
on request
Data sheet
9655A_000-522
Description
1)
SmartCrash barrier with triaxial piezoelectric crash elements, each with
integrated Microdau® incl. non-volatile flash data memory for ma­ximum
data security during crash testing. Frontal crash tests and different
offset crash tests according current crash test regulations.
Other sizes on request
Triaxial Force Plate for RCAR Bumper Instrumentation
Technical Data
Type
Z20616
Fx
kN
0 ... 500
Fy / Fz
kN
±200
m
1,5x0,248x0,171
Measuring range
Dimensions (LxWxH)
Data sheet
Description
on request
Triaxial RCAR bumper instrumentation with integrated charge amplifier
and summaring data output of Fx, Fy and Fz. Can be easily mounted between front and rear structure element of the standard RCAR
bumper.
Triaxial Force Plate for RCAR/AZT Crash Shield for Movable Crash Barriers
Technical Data
Type
9657A1Q
Fx
kN
0 ... 500
Fy / Fz
Measuring range
kN
±100
Dimensions (LxWxH)
m
1x0,5x0,188
Side corner radius r
mm
150
Top corner radius r
mm
50
Data sheet
Description
www.kistler.com
on request
Triaxial RCAR/AZT crash shield to instrument movable crash barriers
(trolleys) with integrated charge amplifier and summing data output of
Fx, Fy and Fz.
27
In-Dummy Data Acquisition Systems – DAQ Modules.
DTI DiMod. Digitization Module
Technical Data
Type
DTI307.1
Supply voltage
V
5,2 ... 6
Sensor supply
V
5 + 0,075/–0,125
Sensor input
instr. amplifier
Weight
grams
0,7
Dimensions (LxWxH)
mm
11x9x6
Data sheet
DTI307_003-081
Description
Decentralized and sensor close signal pro­cessing and digitization of
the recorded measuring data. Data transfer to central data recorder
via RS-485 bus lines. One channel per device. For integration into
standard dummy sensors and load cells. Housing and sensor upgrades
are available.
Technical Data
Type
DTI307.1S
Supply voltage
V
5,2 ... 6
Sensor supply
V
5 + 0,075/–0,125
DTI DiMod. Digitization Module
Sensor input
instr. amplifier
Weight
grams
0,7
Dimensions (LxW)
mm
22x8
Data sheet
DTI307_003-081
Description
Decentralized and sensor close signal pro­cessing and digitization of
the recorded measuring data. Data transfer to central data recorder
via RS-485 bus lines. One channel per device. For integration into
standard dummy sensors and load cells. Housing and sensor upgrades
are available.
Technical Data
Type
DTI307.11
Supply voltage
V
5,2 ... 6
Sensor supply
V
5 + 0,075/–0,125
DTI DiMod. Digitization Module
Sensor input
grams
0,7
Dimensions (LxW)
mm
22x8
Data sheet
Description
28
analog
Weight
on request
Decentralized and sensor close signal pro­cessing and digitization of
the recorded measuring data. Data transfer to central data recorder
via RS-485 bus lines. One channel per device. For integration into
standard dummy sensors and load cells. Housing and sensor upgrades
are available.
www.kistler.com
In-Dummy Data Acquisition Systems – DAQ Modules.
DTI DiMod. Digitization Module
Technical Data
Type
DTI307.3
Supply voltage
V
5,2 ... 6
Sensor supply
V
5 + 0,075/–0,125
Sensor input
instr. amplifier
Weight
grams
1,4
Dimensions (LxWxH)
mm
10x10x10
Data sheet
DTI307_003-081
Description
Decentralized and sensor close signal pro­cessing and digitization of
the recorded measuring data. Data transfer to central data recorder via
RS-485 bus lines. Three independent channels per device. For integration into standard dummy sensors and load cells. Housing and sensor
upgrades are available.
Technical Data
Type
DTI307.3S
Supply voltage
V
5,2 ... 6
Sensor supply
V
5 + 0,075/–0,125
DTI DiMod. Digitization Module
Sensor input
instr. amplifier
Weight
grams
1,4
Dimensions (LxW)
mm
24,8x18,8
Data sheet
DTI307_003-081
Description
Decentralized and sensor close signal pro­cessing and digitization of
the recorded measuring data. Data transfer to central data recorder via
RS-485 bus lines. Three independent channels per device. For integration into standard dummy sensors and load cells. Housing and sensor
upgrades are available.
Technical Data
Type
DTI323.01
Supply voltage
V
5,2 ... 6
Sensor supply
V
5 + 0,075/–0,125
Free Flight Head
Sensor input
grams
11
Dimensions (LxW)
mm
21x19x18
Data sheet
Description
www.kistler.com
instr. amplifier
Weight
on request
Decentralized signal processing and storage of recorded digitized
measuring data close to sensor. Up to three independent channels per
device. For integration into free flight test bodies using the connection
box DTI304.30.
29
In-Dummy Data Acquisition Systems – DAQ Modules.
Data Recorder. In-Dummy Data Recording Module
Technical Data
Type DTI304.04
DTI pins
4
Measuring channels
48
Weight
grams
100
Dimensions (LxWxH)
mm
56x43x36
Data sheet
No.
DTI304_003-063
Description
Centrally positioned in-dummy data recorder with RAM data storage for
DTI DiMod modules. Interconnection between data recorder and DiMod
modules via RS-485 bus. Used in safety crash testing (direct assembling in
crash test dummies together with the UPS power supply).
Data Recorder. In-Dummy Data Recording Module
Technical Data
Type DTI304.08
DTI pins
8
Measuring channels
96
Weight
grams
145
Dimensions (LxWxH)
mm
56x63x36
Data sheet
No.
DTI304_003-063
Description
Centrally positioned in-dummy data recorder with RAM data storage for
DTI DiMod modules. Interconnection between data recorder and DiMod
modules via RS-485 bus. Used in safety crash testing (direct assembling in
crash test dummies together with the UPS power supply).
Data Recorder. In-Dummy Data Recording Module
30
Technical Data
Type DTI304.12
DTI pins
12
Measuring channels
144
Weight
grams
140
Dimensions (LxWxH)
mm
78x50x25
Data sheet
No.
DTI304_003-063
Description
Centrally positioned in-dummy data recorder with RAM data storage for
DTI DiMod modules. Interconnection between data recorder and DiMod
modules via RS-485 bus. Used in safety crash testing (direct assembling in
crash test dummies together with the UPS power supply).
www.kistler.com
In-Dummy Data Acquisition Systems – DAQ Modules.
UPS Power Supply. For DTI In-Dummy Data Recorders
Technical Data
Supply voltage
DTI304.01
V
36 ... 70
Voltage
V
7
Capacity
mAh
360
Accumulator
Power
W
15
Data sheet
No.
DTI304_003-064
Description
Centrally positioned in-dummy rechargeable battery for power supply without external feeding. With charging circuit for battery and monitoring
of residual capacity. Safety crash testing (direct assembling in crash test
dummies together with data recorders).
UPS Power Supply. For DTI In-Dummy Data Recorders
Technical Data
Supply voltage
DTI304.02
V
36 ... 70
Voltage
V
7
Capacity
mAh
740
Accumulator
Power
W
30
Data sheet
No.
DTI304_003-064
Description
Centrally positioned in-dummy rechargeable battery for power supply without external feeding. With charging circuit for battery and monitoring
of residual capacity. Safety crash testing (direct assembling in crash test
dummies together with data recorders).
UPS Power Supply. For DTI In-Dummy Data Recorders
Technical Data
Supply voltage
DTI304V.02
V
36 ... 70
Voltage
V
7
Capacity
mAh
740
Power
W
25
Data sheet
No.
DTI304_003-064
Description
Centrally positioned in-dummy rechargeable battery for power supply without external feeding. With charging circuit for battery and monitoring
of residual capacity. Safety crash testing (direct assembling in crash test
dummies together with data recorders).
Accumulator
www.kistler.com
31
In-Dummy Data Acquisition Systems – DAQ Modules.
Data Recorder. In-Dummy Data Recording Module (Flex PLI)
Technical Data
Type DTI327.04
DTI pins
4
Measuring channels
48
Weight
grams
120
Dimensions (LxWxH)
mm
84x42x19
Data sheet
No.
DTI327_003-068
Description
Core element for recording in-dummy measuring values. The measurement data are peripheral prepared and digitized by DiMods. Especially
designed for recording measurement data in the Flex PLI ('Flexible
Pedestrian Legform Impactor'). Records data during freeflight phase and
the following impact at the vehicle.
Data Recorder. In-Dummy Data Recording Module (Flex PLI)
Technical Data
Type DTI327V.04
DTI pins
4
Measuring channels
48
Weight
grams
120
Dimensions (LxWxH)
mm
82x42x21
Data sheet
No.
DTI327V_003-163
Description
Core element for recording in-dummy measuring values. The measurement data are peripheral prepared and digitized by DiMods. Especially
designed for recording measurement data in Q-dummies (direct assembly
in child dummy series together with the UPS power supply).
nxt32 Data Acquisition Module
Technical Data
Input voltage range
Type K3870A
V
Programmable gain
32
±2,5
1 ... 10 000
Weight
grams
200
Dimensions (LxWxH)
mm
25x54x85
Data sheet
No.
K3870A_003-012
Description
Used for nxt in-dummy systems and on-board systems, 32 analog / 16 digital channels, daisy chaining of several units without a hub, exceeds
SAE J211 and ISO 6487, direct recording in flash memory. Acquisition
module for simultanous data recording in crash testing applications.
www.kistler.com
On-Board Data Acquisition Systems – KiDAU, KiHUB and KiTimer Systems.
KiDAU Advanced On-Board Adapter
Technical Data
Input voltage, relating to –EXC
Type K3880B...
V
Programmable gain
18/–5
0,5 ... 10 000
Weight
kg
1,7
Dimensions (LxWxH)
mm
231x64x70,5
Data sheet
No.
K3880B_003-117
Description
On-board adapter for crash tests. Non-volatile flash data memory for
maximum of data security. One channel CAN bus for recording. Constant
current output available on each channel. WLAN module optionally
available. With ex­tended LION battery for up to 25 minutes.
KiDAU Classic / Basic On-Board Adapter
Technical Data
Input voltage, relating to –EXC
V
Programmable gain
Type K3881A...
Type K3881A...
Type K3882B...
18/–5
5/–2,5
0,5 ... 10 000
1 ... 10 000
Weight
kg
1,7
1,26
Dimensions (LxWxH)
mm
231x64x70,5
210x64x65,5
Data sheet
No.
K3881A_003-115
K3882B_003-116
Description
Passive on-board adapter for crash tests. Non-volatile flash data memory
for maximum of data security. With extended LION battery for up to 20
minutes (KiDAU Classic Type K3881A) rsp. 10 minutes (KiDAU Basic Type
K3882B).
KiHUB Advanced and KiHUB On-Board Adapter
Technical Data
Type K3878A...
Type K3879A...
Power consumption
W
20
18
Weight
kg
1,3
1,2
Dimensions (LxWxH)
mm
231x64x70,5
231x64x70,5
USB port full speed, USB 2.0
Mbps
12
–
USB power out 5 V
VDC
4,9 ... 5,1
–
USB 5 V out max. current
ADC
0,6
–
USB power out DUMPOW
VDC
CLPOW ... 31
–
USB DUMPOW max. current
ADC
1,1
–
Data sheet
No.
K387x_003-082
K387x_003-082
Description
Multiport Ethernet switch. On-board adapter for linking Kistler on-board
measurement systems and ATDs in crash tests.
Airbag Timer KiTimer
Technical Data
Type K3889A
Number of channels
www.kistler.com
16
Ignition power
A
2,0 (±0,15)
Ignition delay
ms
2,7 (±0,20)
Dimensions (LxWxH)
mm
231x138x97,5
Data sheet
No.
K3889A_003-149
Description
CrashLink interface, 16 channels, compatible to CrashDesigner, extended
battery technology for up to 30 minutes. Triggers airbag events in crash
tests and on sled test stands.
33
On-Board Data Acquisition Systems – DTI Systems.
COMBox. Port Connector Box
Technical Data
Type DTI312.10
Recorder interface
7
Supply voltage
V
36 ... 60
Weight
grams
1 450
Dimensions (LxWxH)
mm
165x55x125
Data sheet
No.
DTI312_003-067
Description
Central port connector for DTI measurement technology in the vehicle
or on sleds both for in-dummy and on-board data recording. On-board
adapter for linking Kistler on-board measurement systems and ATDs in
crash tests.
MiniCOMBox. Port Connector Box
Technical Data
Type DTI312.03
Recorder interface
3
Supply voltage
V
36 ... 60
Weight
grams
350
Dimensions (LxWxH)
mm
165x25x70
Data sheet
No.
DTI312_003-083
Description
Central port connector for DTI measurement technology in the vehicle
or on sleds both for in-dummy and on-board data recording. Central
on-board element for the crash test together with other DTI devices (e.g.
data recorder, airbag timer, ...) when there is not sufficient space in the
vehicle or on the sled or when the number of channels of the measurement is reduced.
CrashLink® / DTI Interface Module
Technical Data
Type DTI378.10
Supply voltage
CrashLink 1
V
24 ... 36
CrashLink 2
V
24 ... 60
DTI System connection
V
36 ... 60
Dimensions (LxWxH)
mm
165x104x34,5
Data sheet
No.
on request
Description
Interface module for CrashLink 1 and CrashLink 2 devices with the DTI
system connection. Connects CrashLink 1 and / or CrashLink 2 devices.
Data Recorder
Technical Data
Type DTI304R.08
DTI ports
8
Measuring channels
34
96
Recording time
s
60
Dimensions (LxWxH)
mm
198x70x20
Data sheet
No.
DTI304R.08_003-084
Description
Core element for recording on-board measuring values. The recorder can
be used for recording measuring values of 96 DiMod-channels. Used in
vehicle or sled crash tests. Especially designed for assembling in the rack.
www.kistler.com
On-Board Data Acquisition Systems – DTI Systems.
Board Interface
www.kistler.com
Technical Data
Type DTI335.30
Dummy interface
5
Supply voltage
V
48
Supply voltage pump
V
14
Dimensions (LxWxH)
mm
198x32,5x96
Data sheet
No.
DTI335.30_003-085
Description
Central connection place for up to five dummies in the crash vehicle
in order to relieve the seven system connections of the combox type
DTI312.xyz. Used in crash tests and crash test preparation.
35
Crash Test Software.
CrashDesigner and CrashDesigner Lite. Crash Test Control Software
Technical Data
Type KKT-CDE...
Type KKT-CDL
Hardware
Pentium computer 1
GHz, memory 1 GB,
TCP/IP, HDD 40 GB
or more
Pentium computer 1
GHz, memory 1 GB,
TCP/IP, HDD 40 GB
or more
Software
Java Virtual Machine
1.6, 1.7 or 1.8 (not
1.6.0_05 or earlier).
The setup of CrashDesigner 2.8.5 contains
Java JRE 1.7.0_80
(only 32-bit versions
of Java are supported);
Windows® 7/8.1
Java Virtual Machine
1.6, 1.7 or 1.8 (not
1.6.0_05 or earlier).
The setup of CrashDesigner 2.8.5 contains
Java JRE 1.7.0_80
(only 32-bit versions
of Java are supported);
Windows® 7/8.1
Requirements server
depends on number of
simultaneous users
Windows®/Linux
no server required
Supported database
Oracle, MySQL, SQL
Server, Hypersonic, ...
no database required
Supported hardware
nxt32 in-dummy DAS
systems; KiDAU Basic,
Classic and Advanced
and KiTimer systems;
DTI in-dummy DAS
systems; Minidau®
Classic and
Minidau® Advanced;
Airbag timer 8 or 12
channels; Microdau®
based nxt in-dummy
DAS systems; Kistler
smart barriers; 3rd
party hardware (optional interface)
nxt32 in-dummy DAS
systems; KiDAU Basic,
Classic and Advanced
and KiTimer systems;
DTI in-dummy DAS
systems; Minidau®
Classic and
Minidau® Advanced;
Airbag timer 8 or 12
channels; Microdau®
based nxt in-dummy
DAS systems; Kistler
smart barriers; 3rd
party hardware (optional interface)
Licensing
via USB hardlock key
or license file
via license file
KKT-CDE_003-004
KKT-CDL_003-151
Requirements client
Data sheet
No.
Description
CrashDesigner is an easy software application for data acquisition purposes of crash tests. Main functions are sensor and DAQ management, test
administration, test execution.
CrashLink® is a registered trademark of Kistler Holding AG.
Minidau® is a registered trademark of Kistler Holding AG.
Microdau® is a registered trademark of Kistler Holding AG.
SmartCrash® is a registered trademark of Kistler Holding AG.
Windows® is a registered trademark of Microsoft Corporation.
36
www.kistler.com
©2016, Kistler Group
200DOM
960-003e-02.16
Kistler Group
Eulachstrasse 22
8408 Winterthur
Switzerland
Tel. +41 52 224 11 11
Kistler Group includes the Kistler Holding AG and
all its subsidiaries in Europe, Asia, Americas and Australia.
Find your local contact on
www.kistler.com