Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ Series
Features
Ultraminiature Block Type
- Three kinds of CPU of card size are available.
- The main body is equipped with up to 14 input/
output points such as discrete and analog points,
depending on the type of CPU, and it enables
control from a single CPU.
- The block type comes without a base as a means
for eliminating wasted space and prioritizing spacesavings.
KOSTAC Safety
AZ-C1
■Features
SJ
DL05/06
DL205
D4
D3
Programmer
Built-in I/O in minimum size ＜Standard･Analog･Sound＞
Sound reproduction possible for up to 2 hours ＜Sound＞
The minimum chassis size with built-in I/O (8 input points and 6 output
points) is W53.5 x H85 mm. The SJ series has a card-size lightweight body
but enables full control by itself. It can meet a variety of requests such as use
with compact devices, building auxiliary systems that emphasize mobility,
and low-cost capital investment. Since many add-on units can be connected
to the limited installation space, it can flexibly respond to future expansion.
There are five kinds of usable bit rates of audio data. Systems can be built
to requirements ranging from an emphasis on sound quality to long-term
reproduction.
Can be driven with existing 24 V power sources
＜Standard･Analog･Sound＞
Process Control
The drive power is standard. A 24 V power source used for current
devices can be used as is, and there is no need to separately prepare a
dedicated power supply unit. Of course, in accordance with connections
and configurations of various extension units, operation with the addition of
expanded power supply modules is freely possible.
ZIP LINK
Equipped with PID control ＜Standard･Analog･Sound＞
DirectSOFT
Terminator I/O
PID control is a loop-back mechanism for freely controlling analog data
such as temperature, humidity, pressure, and flow rate. Therefore, the SJ
series is very suitable for machinery and equipment that needs to control
analog quantities such as cooking appliances. The world of craftsmanship
can be realized in machines to enhance the added value of manufacturing
equipment.
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
Numerous audio data is available. ＜Sound＞
Voice comments such as "Thank you" and "Please be careful", order
vocabularies such as "first, second ..." and "line 1, line 2... ", and
onomatopoeia such as "ping-pong" and "boo" are included in the standard
comment collection. Customers can create optimal sound guidance by
combining the prepared sound sources.
■System Specification
Module configuration
Maximum system configuration:
［Power supply module］+［CPU module］+［8 extension I/O module］
Power Supply Module
CPU Module
Extension I/O Module
The main body is equipped with analog I/O. ＜Analog＞
Analog signal-handling equipment is directly connected to the I/O built into
the main body. Since coordinated control of analog / digital signals is possible
by the product alone, it can achieve the targeted control content using a
minimum number of modules.
Up to 128 kinds of audio data can be registered and
controlled. ＜Sound＞
Using the data conversion software dedicated to the sound type of KOSTAC
SJ, the SJ series can easily create and edit dedicated sound source data
from sound source files in "WAV format" used normally in Windows®. Voice
sound sources can be freely selected and combined using the program of the
PLC.
Sound Type
Analog Type
Standard Type
Extension I/O Module
16 Points/8 Points
Reproduce sound through connected speakers
＜Sound＞
The SJ series has a power amplifier built into the CPU. Sound can be played
back through speakers when connected to it. Equipped with sound volume
adjustment functions, it can be operated using the volume of the main body
and PLC programs. A low-power-consumption mode when it produces no
sound is also available.
46
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
Specifications
PLC
HMI
SENSOR
■Model Number List
Name
ENCODER
Outline
Standard Type
Model Number
SJ-00DD1-D
SJ-00DD2-D
SJ-00DR-D
SJ-00AR-D
Analog Type
Model Number
CPU Module
SJ-02DD1-D
SJ-02DD2-D
SJ-02DR-D
Points
8
8
8
8
Input
Function
24 V DC Sink/source
24 V DC Sink/source
24 V DC Sink/source
100 to 120 V AC
Points
6
6
6
6
Output
Function
5 to 27 V DC Sink
24 V DC Source
Relay 1 A
Relay 1 A
Points
4
2
4
2
4
2
Input
Function
24 V DC Sink/source
0 to 5 V/4 to 20 mA
24 V DC Sink/source
0 to 5 V/4 to 20 mA
24 V DC Sink/source
0 to 5 V/4 to 20 mA
Points
4
2
4
2
4
2
Output
Function
6 to 27 V DC Sink
0 to 5 V/4 to 20 mA
24 V DC Source
0 to 5 V/4 to 20 mA
Relay 1 A
0 to 5 V/4 to 20 mA
Weight (g)
Price
140
140
160
160
Open
Open
Open
Open
Weight (g)
150
150
160
Price
Open
Open
Open
Open
Open
Open
Sound Type
Model Number
Power Supply Module
SJ-30DD1-D
AC Power Supply Module
Model Number
J-00AC
J-01AC
Input/Output Module
Model Number
Extension IO Module
Associated Equipment
J-08ND3
J-08ND3-1
J-16ND3
J-08NA
J-08TD1
J-08TD2
J-16TD1
J-16TD2
J-08TA
J-08TR
J-04TRS
Peripheral Device
Model Number
PC-DSOFT5
DV-1000
Cable / Connector for program
Model Number
S-9CNS1
Z-20JP
Maintenance Product
Model Number
D2-BAT-1
Input
Points
Function
5
24 V DC Sink/source
Output
Points
Function
5
5 to 24 V DC Sink
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
SJ
DL05/06
Weight (g)
Price
DL205
155
Open
D4
Weight (g)
150
170
Price
Open
Open
D3
Weight (g)
Price
DirectSOFT
80
80
90
80
80
80
90
90
100
110
125
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Terminator I/O
Weight (g)
145
160
Price
Open
Open
Features
Function
Conversion connector between DOS/V and Z-20JP
Programmer connection cable 2 m, modular jack on both ends
Weight (g)
Price
Open
Open
Dimensions
Function
CPU memory backup battery for analog / sound type
Weight (g)
Function
24 V DC 0.5 A type
24 V DC 1.3 A type
Points
8
8
16
8
Input
Function
12 to 24 V DC Sink/source
3.3 to 5 V DC Sink/source
24 V DC Sink/source
100 to 120 V AC
Output
Function
Points
8
8
16
16
8
8
4
3.3 to 27 V DC Sink
12 to 24 V DC Source
5 to 27 V DC Sink
12 to 24 V DC Source
17 to 240 V AC SSR 0.3 A
Relay 1 A
Relay SPDT 7 A
Function
Programmer software for computer
Operation display panel
Price
Open
Programmer
Process Control
ZIP LINK
Specifications
CPU
Specifications
Power Supply
Module
Input/Output
Module
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
47
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
SJ
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Features
Specifications
SJ Series
Specifications
■ Performance Specifications (Common)
Items
Control System
Language System
Number of Instructions
Number of Other Instructions
Processing Speed
Program Memory Capacity
(Word)
Program 7.5 K + System parameter 0.5 K
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
Data Register
Special Register
Accumulator
Data Stack
Calendar, Clock
Password
Input/Output Allocation
PID Function
Soft Filter
Interruption Function
Pulse Catch Function
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1000 to 1177)
7,488 word (R 400 to 677, R 1,200 to 7,377, R 10,000 to 17,777)
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
Stored data: Year, month, day, day of week, hour, minute, second (Backup battery: D2-BAT-1)
No
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
No
4 points
No
External interruption: 4 points Timer interruption: 1 points No
4 points
High Speed Counter
No
Pulse output
Operation Mode
Power Failure Holding
Diagnosis Function (Hardware)
No
20 kHz 1 ch (Unavailable for relay type)
20 kHz 1 ch (Unavailable for AC, relay type)
RUN / STOP / TERM
Can retain the bit areas (M, S, T, C), some timer / counter elapsed value registers, data registers and special registers during power failures.
Watchdog timer, cell voltage fall
Watchdog timer
Diagnosis Function (Software)
- I/O arrangement check - Program memory check - Calculation monitoring timer
- Communication error (Programmer port, general-purpose communication port)
Installation
Conforming DIN Rail
DIN rail or 2 screws
TH35Fe/TH35Al
Communication Function:
Port 1
Transmission method: RS-232C compatible (Non-isolated) Transmission speed: 9,600 bps (Fixed) Connection: 6-pin modular (Female) jack Protocol: K sequence (S)
Communication Function:
Port 2
Dimensions
CPU
Specifications
Power Supply
Module
Specifications
Sound Type
Analog Type
Standard Type
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
Sequence instructions: 54, program execution control instructions: 20, data processing instructions: 82, IBox instructions: 22
4
2
Sequence instructions: 0.37 μs ~ Data processing instructions: 2.96 μs ~
Communication Function:
Port 3
20 kHz Addition counter: 2 ch, Add-Subtract counter: 1 ch
20 kHz Addition counter: 2 ch,
Add-Subtract counter: 1 ch
(Unavailable for AC type)
Transmission method: RS-232C compatible (Non-isolated) Transmission speed: 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to 38,400 bps for non-procedures) Connection: 6-pin modular (Female) jack
Protocol: DirectNET (M/S), MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Transmission method: RS- 485 compatible (Non-isolated) Transmission speed: 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200
bps (Up to 38,400 bps for non-procedures) No
Connection: Terminal block 3 pins Protocol: DirectNET (M/S), MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Input/Output
Module
48
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
Specifications
■ General Specifications (Common)
Items
Supply Voltage
Specifications
24 V DC
Items
Audio Output Form
Specifications
Balance Output
Power Consumption
Not more than 5 W
(When the communication port is not fed)
Power Source
Inrush Current
Nominal impedance 8 Ω
External Connection
Maximum permissible
Speaker
input 1 W or more
30 A or less (1 ms or less)
Allowable
Instantaneous
Power Failure Time
Up to 10 ms
ENCODER
Remarks
Monaural
Audio Output
Terminal
φ3.5 mini-pin jack
SP+: Speaker output +
SP-: Speaker output Sound can be adjusted from a
volume on the front face of
the main body. The program
control system can be
adjusted from the PLC
program.
Operating Ambient
Temperature
0˚C to 55˚C IEC60068-2-14
(Temperature change test)
Volume Control
Form
Storage Ambient
Temperature
ｰ20˚C to 70˚C
IEC 60068-2-1 (Test Ab low temperature)
IEC 60068-2-2 (Test Bb high temperature low humidity)
IEC 60068-2-14 (Test Na temperature change)
Power Amplifier
D-class amplifier:
TPA2001D1 equivalent
The low-power-consumption
mode is set when no sound is
produced.
2-bit ADPCM2 system
4-bit ADPCM system
(Recommended)
Suitable for normal sound
playback
8-bit non linear PCM system
8-bit straight PCM system
16-bit straight PCM system
Suitable for playback of sound
effects including high
frequency component
Maximum
Reproduction Time
Approx. 2 hours
The playback time changes
according to sound synthesis
system and sampling
frequency.
Number of Sound
Comment
Registrations
128 comments
30% to 95% (No condensation)
Surrounding
No corrosive gases Atmosphere in Place
Environmental pollution level 2 (UL 840)
of Use
Compliant with MIL STD 810C, Method 514.2,
Vibration Resistance IEC60068-2-6, JIS C60068-2-6, and sine wave oscillation
test method
Impact Resistance
Noise Resistance
Radiation
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
Compliant with NEMA ICS3-304, Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI),
EN61000-4-4 (FTB), EN61000-4-5 (Surge), EN61000-4-8
(Magnetic fields),
RFI: 150, 450 MHz (5W/15 cm), EN61000-4-6 (Conducted
interference)
EN55011: 1998 Class A
Conformance
Standard
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Other
Compliant with RoHS
Sound Synthesis
System
Sound Rewrite
System
COUNTER
INFORMATION
Volume for sound adjustment
+ Program control system
(4-stage volume control)
Use / Storage
Ambient Humidity
HMI
SENSOR
■ Sound Type Individual
Specifications
20 to 28 V DC
Supply Voltage
Variation Range
PLC
Common
Subject Matter
KOSTAC Safety
AZ-C1
SJ
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Terminator I/O
Automatic transfer from
external USB memory
(USB A type connector)
The sound data in the
external USB memory
connected to the dedicated
USB port is automatically
transferred to the internal
sound data storage memory.
Process Control
ZIP LINK
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
49
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
SJ
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
SJ Series
Specifications
■Software Specifications Dedicated
to Sound Type
Compilation Tool for sound SJ You can easily create audio data dedicated to the KOSTAC SJ from standard
audio files of Windows®.
The dedicated format that emphasizes file management security and
reliability is used for the audio file data of the sound type of KOSTAC SJ. To
create and manage data, you can use Koyo Electronics' original audio data
creation tool developed for the KOSTAC SJ.
Features
- Easily create dedicated files
You can easily and quickly create audio data dedicated to the KOSTAC SJ
from the standard "WAV" audio files of Windows® computers.
- The screen can be intuitively used.
It uses an easy-to-see and easy-to-understand screen design used for
spreadsheet software. You can immediately call up necessary functions
from the icons.
- Voice conversion method can be selected from five kinds.
According to the environment, you can create five kinds of audio data with,
for example, an emphasis on high-quality sound, long-term reproduction,
or economized file sizes.
- Worksheets divided into 4 parts
You can divide the comments into 4 parts, so for the maximum 128, it
means 32 comments per page. Just the sound source of the page that
needs to be edited can be transferred while frequently used sound sources
can be kept in place.
CPU
Specifications
Power Supply
Module
Input/Output
Module
List of WAV Files
Worksheet
Conversion Method
WAV File Playback
Audio conversion method
Audio data can be converted into the following five kinds according to
application.
Approximate Reproduction Time (min.)
Specifications
Dimensions
New Worksheet
Open the Worksheet
Save the Worksheet
Help
ROM File Creation
Selection of WAV Folder
Replacement Line
Delete Line
Worksheet Play
Outline
Conversion Method
1. 2-bit ADPCM2 method
2. 4-bit ADPCM method (Recommended)
3. 8-bit non-linear PCM method
4. 8-bit straight PCM method
5. 16-bit straight PCM method
Features
Worksheet screen
Sampling
Frequency
8 kHz
12 kHz
16 kHz (Recommended)
24 kHz
32 kHz
48 kHz
Reproduction Time (Per Page) ≒
Suitable Applications
Suitable for normal sound reproduction.
Suitable for reproduction of sound
effects that contain high frequency
components
1
140
93
70
47
35
23
Conversion Method
2
3
4
70
35
35
47
23
23
35
17
17
23
12
12
17
9
9
12
6
6
5
17
12
9
6
4
3
1,024 x 131,056 (bit)
Sampling Frequency (Hz) x Bit Length (bit) x 60 (sec)
Operating Environment
Items
Contents
PC
Supported OS: Windows 2000 / XP Interface: 1 or more USB ports
Hard disk free space: Approx. 1MB ROM for installation, approx. 220 MB for file creation
USB Memory
Format: FAT format
Free space: 64 MB or more* 1
WAV Files that can be
Registered
Monaural PCM format of 8-bits or 16-bits
Files Created in the Designated
Folder on the PC
Voice data (Binary format) x 4 (File name 1 to 4.bin) / (Extension Intel HEX format) x 4 (File name 1 to 4.hex)
Registration information file (Text format) (File name 1 to 4.inf)
Worksheet file (Binary format) (File name 1 to 4.wsf)
Recommended USB memory: Recognized as the SCSI device* 2
Files Created in the Root Area of
The ROM file in the USB memory (Binary format) x 4 (vdata 01 to 04.bin)* 3
the USB Memory
*1 The area that can actually save data is smaller than the capacity of a USB memory drive.
*2 USB memory drives that are recognized as IDE devices cannot be used.
*3 A file is created under the name of "vdata01 to 04.bin" in the root area of the USB drive designated by the USB memory regardless of the designated file name. Moreover, the capacity of a created ROM file is
fixed to 128 Mbit (=16 MB) per page regardless of the number of comments and reproduction time.
50
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
■外形図
■外形図
■外形図
SJ Series
Dimensions
単位
（ｍｍ）
単位
（ｍｍ）
単位（ｍｍ）
ENCODER
±0.2
42.4±0.2
42.4
42.4±0.2
±0.2
42.5±0.2
42.5
42.5±0.2
A
A
A
COUNTER
M4 Mounting
Mounting Hole
Hole
M4
M4 Mounting Hole
±0.2
27.2±0.2
27.2
27.2±0.2
Number of
of
Number
Extension
Extension
Number
of
IO
Modules
IO
Modules
Extension
IO Modules
1
1
1
22
2
33
3
44
4
55
5
66
6
77
7
88
8
8585
85
4.14.1
4.1
Front view
3.33.3
3.3
HMI
SENSOR
■Dimensions (Unit: mm)
17.5
17.5
17.5
PLC
15.4
15.4
15.4
±0.2
49.5±0.2
49.5
49.5±0.2
±0.2
37.4±0.2
37.4
37.4±0.2
±0.2
27.2±0.2
27.2
27.2±0.2
INFORMATION
A
A
A
115.4
115.4
115.4
142.4
142.4
142.4
169.4
169.4
169.4
196.4
196.4
196.4
223.4
223.4
223.4
250.4
250.4
250.4
277.4
277.4
277.4
304.4
304.4
304.4
Common
Subject Matter
KOSTAC Safety
AZ-C1
SJ
DL05/06
M4 Mounting
Mounting Hole
Hole
M4
M4 Mounting Hole
DL205
D4
Top view
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
9.4
9.4
9.4
11.7
11.7
11.7
34.9
34.9
34.9
53.5
53.5
53.5
Side view
Power Supply
Supply Module
Module
Power
Power Supply
75 Module
75
75
11.7
11.7
11.7
27
27
27
CPU Module
Module
CPU
CPU Module
75
75
75
9.4
9.4
9.4
I/O Module
Module
I/O
I/O Module 75
75
75
Features
9.4
9.4
9.4
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
51
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
CPU Specifications
■Standard Type《DC Input 8 Points, DC Output 6 Points》
SJ-00DD1-D
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
General Specifications
SJ
Performance Specifications
DL05/06
Items
Supply Voltage
DL205
Supply Voltage Variation
Range
20 to 28 V DC
Power Consumption
Not more than 5 W
(When the communication port is not fed)
D4
Specifications
24 V DC
Items
Control System
Language System
Specifications
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
Number of Instructions
Sequence instructions: 54, program execution control
instructions: 20, data processing instructions: 82,
IBox instructions: 22
Power Source Inrush Current 30 A or less (1 ms or less)
Number of Other Instructions 2
D3
Allowable Instantaneous
Power Failure Time
Up to 10 ms
Processing Speed
Sequence instructions: 0.37 μs ~ Data processing instructions: 2.96 μs ~
Programmer
Operating Ambient
Temperature
0˚C to 55˚C IEC60068-2-14 (Temperature change test)
Program Memory Capacity
(Word)
Program 7.5 K + System parameter 0.5 K
Storage Ambient
Temperature
ｰ20˚C to 70˚C
IEC 60068-2-2 (Test Bb high temperature low
humidity)
IEC 60068-2-1 (Test Ab low temperature)
IEC 60068-2-14 (Test Na temperature change)
Use / Storage Ambient
Humidity
30% to 95% (No condensation)
Surrounding Atmosphere in
Place of Use
No corrosive gases Environmental pollution level 2 (UL 840)
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1,000 to 1177)
Vibration Resistance
Compliant with MIL STD 810C, Method 514.2,
IEC60068-2-6, JIS C60068-2-6, and sine wave
oscillation test method
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter (C)
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
Data Register
7,488 word
(R 400 to 677, R 1,200 to 7,377, R 10,000 to 17,777)
Impact Resistance
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
Noise Resistance
Compliant with NEMA ICS3-304,
Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI),
EN61000-4-4 (FTB), EN61000-4-5 (Surge),
EN61000-4-8 (Magnetic fields),
RFI: 150, 450 MHz (5W/15cm),
EN61000-4-6 (Conducted interference)
Special Register
Accumulator
Data Stack
Password
Input/Output Allocation
PID Function
Soft Filter
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
4 points
Radiation
Conformance Standard
Other
EN55011: 1998 Class A
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Compliant with RoHS
Interruption Function
External interruption: 4 points Timer interruption: 1 point
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
Pulse Catch Function
4 points
High Speed Counter
20 kHz Addition counter: 2 ch, Add-Subtract
counter: (Unavailable for AC type)
Pulse output
Operation Mode
20 kHz 1 ch (Unavailable for AC, relay type)
RUN /STOP /TERM
Power Failure Holding
Can retain the bit areas (M, S, T, C), some counter
elapsed value registers, data registers and special
registers during power failures.
Diagnosis Function (Hardware) Watchdog timer
Diagnosis Function
(Software)
Installation
Conforming DIN Rail
Communication Function:
Port 1
Communication Function:
Port 2
52
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
- I/O arrangement check - Program memory check
- Calculation monitoring timer - Communication error
(Programmer port, general-purpose communication port)
DIN rail or 2 screws
TH35Fe /TH35Al
Transmission method: RS-232C compatible (Nonisolated) Transmission speed: 9,600 bps (Fixed)
Connection: 6-pin modular (Female) jack Protocol: K sequence (S)
Transmission method: RS-232C compatible (Nonisolated) Transmission speed: 300, 600, 1,200,
2,400, 4,800, 9,600, 19,200, 38,400, 57,600,
115,200 bps (Up to 38,400 bps for non-procedures)
Connection: 6-pin modular (Female) jack Protocol: DirectNET (M/S), MODBUS (M/S), Nonprocedure (M/S), K sequence (S)
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
CPU Specifications
High Speed
High speed input:
6.0Circuit
mA (26.4 V DC)
Standard input: 5.0 mA (26.4 V DC)
24 V
DC
Maximum
Input Current
Common
On-state Voltage / Current
High speed input: 19 V DC/4.5 mA
Standard input: 19 V DC/3.5 mA
Off-state Voltage
/ Current
Internal Module Circuitry
High speed input: 4 V DC/0.1 mA
Standard input: 7 V DC/0.5 mA
High speed input: 4.7 kΩ (24 V DC)
Standard input: 6.8 kΩ (24 V DC)
Input
Input Impedance
Response
Time
標準入力
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 2 ms
Common
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 3 ms
ON→OFF
24 V
DC
Common
24 V DC
+
−
Internal Module
Input
Common
Subject Matter
C2
0
1
2
3
C3
4
5
+V
Optical Isolation
OFF→ON
24 V
DC
高速入力
COUNTER
+
−
INFORMATION
L
L
L
KOSTAC
24
V
DC
AZ-C1
5 to 27 V
DC
L
L
Common
DL05/06
Internal Module
5 to 27 V
DC
24 V DC
DL205
24 V DC
L
5 to 27 V DC
Number of Occupied
Outputs
Specifications
Optical
Isolation
Equivalent Circuit
6 points (Sink)
High
Speed
Circuit
C0
8 points
+
−
+
−
+
−
+
−
+
−
+
−
+
−
+
−
5 to 27 V
DC
24 V DC
24 V DC
24 V DC
10
20
30
40
50 55 60
Ambient Temperature (˚C)
+V
Output
高速入力
5 to 27 V DC
Optical Isolation
Optical Isolation
Common
Process Control
High Speed Circuit
高速入力 Common
高速入力
ZIP LINK
High Speed Circuit
高速入力
High Speed Circuit
High Speed Circuit
Common
Internal Module Circuitry
Common
Standard DC
input (I2 to I7)
Input
Internal Module Circuitry
Optical Isolation
標準入力
Internal
Input Module Circuitry
24 V
DC
Input Module Circuitry
Internal
Common
Input
24 V
DC
Optical Isolation
標準入力
Features
標準入力
Optical Isolation
Optical Isolation
+V
24 V DC
Internal
Module Circuitry
+V
5 to 27 V DC
High
24 V DC
Output
Speed
L
+V
Internal
Module Circuitry
Circuit
524toV27
DCV DC Output
L
Common
High
+V
Speed
5 to 27 V DC
Circuit
Output
High
L
Speed
Common
Circuit
5 to 27 V DC
High
Common
Speed
Circuit
Internal Module Circuitry
Common
24 V DC
+V
Internal Module Circuitry
Output
24 V DCL
Internal
Module Circuitry
+V
5 to 27 V DC
24 V DC
Output
L
+V
Internal
Module Circuitry
ディレーティング
Optical
Isolation
Optical
Isolation
Power Supply
Optical
Isolation
パルス出力
0
Module
パルス出力
0
Input/Output
Optical
Isolation
Module
パルス出力
Optical
Isolation
標準出力
Standard DC output (Q1 to Optical
Q5)
Isolation
524toV27
DCV DC Output
L
Common
+V
5 to 27 V DC
Output
L
Common
5 to 27 V DC
Input
Output
6
Dimensions
4
CPU
Specifications
2
パルス出力
Common
Internal Module Circuitry
Common
Internal Module Circuitry
Pulse DCL output
Output (Q0)
8
標準入力
Specifications
Common
24 V DC
0
0
DC
24 V
DC
24 V DC
L
Terminator
I/O
Optical Isolation
標準出力
24 V
Optical
Isolation
標準出力
標準出力
Optical
Isolation
標準出力
Common
Common
ut
Points
oints
put/Output
utput
PointsPoints
Number of Input/Output Points
+
−
+
−
+
−
2
5 to 27 V
DC
5 to 27 V
DC
24 V
DC
24 V
DC
5 to 27 V
5 to 27 V
DC
DC
+
−
+
−
+
−
L
+V
5 to 27 V
DC
5 to 27 V
DC
+
−
L
L
++
−−
+
−
+
−
L
L
None
L
LL
L
LL
L
LL
LL
L
LL
L
L
LL
Input
Internal Module Circuitry
Optical Isolation
Common
Input
5 μs
Pulse
2027μs,
5 to
V Standard 5 μs
L output: Up to
DC to 0.5 ms
Standard output: Up
+
−
4
−
Pulse output: Up to2420
μs, Standard
V DC
+
Standard output: Up to 0.5 ms
−
Internal Module
DirectSOFT
24 V DC
Input Module Circuitry
Internal
24 V
DC
Common
Internal Module Circuitry
Internal
Input Module Circuitry
24 V
DC
Output
Programmer
パルス出力
High speed DC input (I0, I1)
Common Common
2 (4 points/common & 2 points/common)
0
24 V DC
Output Voltage Range C0
5 to 27 V DC
+
1
−
Operating Voltage C0
4 to 30 V DC
0
24 V DC
2
+
Output Type
NPN
open
collector
01
Internal ModuleC0
Circuitry
−
ON-time
Voltage Drop 3
0.5 V DC (0.1 A) 24 V DC +
24 V DC
2
1
−
0
+V
C1 Optical
Maximum Output
Current
0.1 A (Points) 0.424AV (C2) 0.2
A (C3)
DC
Isolation
+
2
Output
13
L Leakage Current
4
Maximum
0.1 mA (30 V DC) 24 V DC −
+
C1
3
5 to 27 V DC
25
Maximum Inrush Current
150 mA (10 ms)
−
4
C1
3
24
V
DC
6
Minimum Load Current
0.2 mA
+
Common
45
External Power SupplyC1
20 to 28 V DC Up24toV DC
60 mA+−
7
5
46
OFF→ON
6
57
Response
C2
7
Time
60
ON→OFF
C2
71
0
C2
Fuse
2
01
C2
3
1
02
Derating ChartC3
2
13
4
C3
3
25
Input
C3
8
34
+V
5
4
Output C3
6
+V
5
4
+V
5
D3
Number of Input/Output Points
+V
Items
Output
Number Lof Outputs
Points
+V
5 to 27 V DC
D4
Internal Module Circuitry
(Pulse output: Q0 Standard output: Q1 to 5)
Output Specifications
24 V DC
Safety
SJ
L
+
−
High speed input: 5 mA (24 V DC)
Standard input: 4 mA (24 V DC)
Optical Isolation
Input
24 V DC
+
−
Input
Input Current
Internal Module
ENCODER
C0
0
1
2
3
C1
4
5
6
7
Specifications
8 points (Sink/source)
8 points
2 (4 points/common)
24 V DC
21.6 to 26.4 V DC
+
−
Items
Number of Input Points
Number of Occupied Inputs
Common
Input VoltageInternal
Range
Module Circuitry
Operating Voltage
+
−
(High speed input: I0 to 1 Standard input: I2 to 7)
HMI
SENSOR
Wiring Diagram
+
−
Input Specifications
PLC
8
Input
Input
Output
The specifications and prices described in this catalog were valid when the catalog was6
8 issued.
Input
For the latest information, contact our sales persons or see our website.
8
Output
6
4
Input
Output
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
53
ディレーティング
10
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
CPU Specifications
■Standard Type《DC Input 8 Points, DC Output 6 Points》
SJ-00DD2-D
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
General Specifications
SJ
Performance Specifications
DL05/06
Items
Supply Voltage
DL205
Supply Voltage Variation
Range
20 to 28 V DC
Power Consumption
Not more than 5 W
(When the communication port is not fed)
D4
Specifications
24 V DC
Items
Control System
Language System
Specifications
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
Number of Instructions
Sequence instructions: 54, program execution control
instructions: 20, data processing instructions: 82,
IBox instructions: 22
Power Source Inrush Current 30 A or less (1 ms or less)
Number of Other Instructions 2
D3
Allowable Instantaneous
Power Failure Time
Up to 10 ms
Processing Speed
Sequence instructions: 0.37 μs ~ Data processing instructions: 2.96μs ~
Programmer
Operating Ambient
Temperature
0˚C to 55˚C IEC60068-2-14 (Temperature change test)
Program Memory Capacity
(Word)
Program 7.5 K + System parameter 0.5 K
Storage Ambient
Temperature
ｰ20˚C to 70˚C
IEC 60068-2-2 (Test Bb high temperature low
humidity)
IEC 60068-2-1 (Test Ab low temperature)
IEC 60068-2-14 (Test Na temperature change)
Use / Storage Ambient
Humidity
30% to 95% (No condensation)
Surrounding Atmosphere in
Place of Use
No corrosive gases Environmental pollution level 2 (UL 840)
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1,000 to 1177)
Vibration Resistance
Compliant with MIL STD 810C, Method 514.2,
IEC60068-2-6, JIS C60068-2-6, and sine wave
oscillation test method
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter (C)
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
Data Register
7,488 word (R 400 to 677, R 1,200 to 7,377, R
10,000 to 17,777)
Impact Resistance
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
Noise Resistance
Compliant with NEMA ICS3-304,
Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI),
EN61000-4-4 (FTB), EN61000-4-5 (Surge),
EN61000-4-8 (Magnetic fields),
RFI: 150, 450 MHz (5W/15 cm),
EN61000-4-6 (Conducted interference)
Special Register
Accumulator
Data Stack
Password
Input/Output Allocation
PID Function
Soft Filter
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
4 points
Radiation
Conformance Standard
Other
EN55011: 1998 Class A
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Compliant with RoHS
Interruption Function
External interruption: 4 points Timer interruption: 1 point
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
Pulse Catch Function
4 points
High Speed Counter
20kHz Addition counter: 2 ch, Add-Subtract
counter: (Unavailable for AC type)
Pulse output
Operation Mode
20 kHz 1 ch (Unavailable for AC, relay type)
RUN /STOP /TERM
Power Failure Holding
Can retain the bit areas (M, S, T, C), some counter
elapsed value registers, data registers and special
registers during power failures.
Diagnosis Function (Hardware) Watchdog timer
Diagnosis Function
(Software)
Installation
Conforming DIN Rail
Communication Function:
Port 1
Communication Function:
Port 2
54
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
- I/O arrangement check - Program memory check
- Calculation monitoring timer - Communication error
(Programmer port, general-purpose communication port)
DIN rail or 2 screws
TH35Fe /TH35Al
Transmission method: RS-232C compatible (Nonisolated) Transmission speed: 9,600 bps (Fixed)
Connection: 6-pin modular (Female) jack
Protocol: K sequence (S)
Transmission method: RS-232C compatible (Nonisolated) Transmission speed: 300, 600, 1,200,
2,400, 4,800, 9,600, 19,200, 38,400, 57,600,
115,200 bps (Up to 38,400 bps for non-procedures)
Connection: 6-pin modular (Female) jack Protocol: DirectNET (M/S), MODBUS (M/S), Nonprocedure (M/S), K sequence (S)
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
CPU Specifications
Specifications
8 points (Sink/source)
8 points
2 (4 points/common)
24 V DC
21.6 to 26.4 V DC
C0
0
1
2
3
C1
4
5
6
7
Optical Isolation
High speed input: 5mA (24 V DC)
Standard input: 4mA (24 V DC)
高速入力
High Speed Circuit
24 V
DC
Maximum Input
Current
Common
High speed input: 6.0mA (26.4 V DC)
Standard input: 5.0mA (26.4 V DC)
On-state Voltage / Current
High speed input: 19 V DC/4.5 mA
Standard input: 19 V DC/3.5 mA
Off-state Voltage
/ Current
Internal Module
Circuitry
High speed input: 4 V DC/0.1 mA
Standard input: 7 V DC/0.5 mA
標準入力
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 2 ms
OFF→ON
24 V
DC
Response
Time
Optical Isolation
Common
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 3 ms
ON→OFF
Output Specifications (Pulse output: Q0 Standard output: Q1 to 5)
Internal Module Circuitry
Items
Number of Outputs Points
+V
24 V
DCKOSTAC
AZ-C1
L
+
−
L
L
DL05/06
L
Internal Module Ci
L
L
Optical
Isolation
Internal Module Circuitry
Input
−
24 VADC
0.1 A (Points) 0.4
(C2) 0.2
A (C3)
+
−
0.1 mA (30 V DC)
150 mA (10 ms)
24 V DC
+
0.2 mA
24 V DC
−
+
24 V
DC
24 V
DC
24 V
DC
24 V
DC
標準出力
+
−
24 V DC
DL205
24 V DC
D4
L
L
L
L
L
L
L
+
−
+
−
L
L
L
L
L
L
L
L
L
+
−
+
+
−
+
−
24 V DC
−
30
24 V DC
24 V DC
Optical Isolation
Optical Isolation
High Speed Circuit
Optical Isolation
High Speed Circuit
High Speed Circuit
Common
High Speed Circuit
Common
+V
ProcessOutput
Control
高速入力
L
高速入力
Common
高速入力
ZIP LINK
高速入力
標準入力
標準入力
Features Input
標準入力
8
標準入力
Optical Isolation
Input
Common
Optical Isolation
Common
Internal Module Circuitry
Pulse DC
output
24 V DC
Internal (Q0)
Module Circuitry
+V
24 VInternal
DC
Module Circuitry
Optical
+V
Isolation
24 V DC
High
Internal Module Circuitry
Speed Optical
+V
Isolation
Circuit
High
24 V DC
Optical
Speed
+V
Isolation
HighCircuit
Output
Speed Optical
L
Circuit
Isolation
Common
High
Output
L
Speed
Common
Circuit
Output
L
Common
Output
L
Common
Specifications
Output
6
Dimensions
4
CPU
2
Specifications
パルス出力
0
Power
Supply
Module
パルス出力
0
10
パルス出力
Input/Output
パルス出力
Module
ディレーティング
50 55 60
Ambient Temperature (˚C)
24 V DC
Terminator I/O
Common
24 V DC
24 V DC
24 V DC
Common
Internal Module Ci
DirectSOFT
Common
24 V DC
− 24 V DC
40
24 V
DC
24 V
DC
24 V
DC
24 V
DC
Internal Module Circuitry
24 V DC Internal Module Circuitry
+V
Optical
24 VInternal
DC
Module Circuitry
Isolation
+V
Optical
24 V DC
Isolation
Internal Module Circuitry
+V
Optical
24 V DC
Isolation
+V
Optical
Output
Isolation
L
Common
Output
L
Common
Output
L
Common
Output
L
Common
Standard DC output (Q1 to Q5)
tput
t Points
Points
Output
ut/Output
Points
Points
L
+
−
+
Output
Programmer
Internal Module Circuitry
Input
Internal Module Circuitry
Optical Isolation
Input
Internal Module Circuitry
Optical Isolation
Input
+
L
L
L
Standard DCInternal
inputModule
(I2Circuitry
to I7)
Pulse output: Up to 20 μs Standard
5μs
−
Standard output: Up to 0.5 ms
L
Common
+V
Common
Pulse output: Up 24
to 20
μs, Standard
5 μs
V DC
+ −
Standard output: 24
UpVtoDC0.5 ms
−
None
Input
Safety
Common
SJ
24 V DC
Internal Module Circuitry
Input
Internal Module Circuitry
Optical Isolation
Input
+
−
+
Pulse output: 1.0 V DC
24 (0.1
V DCA)
Standard output: 24
0.5V DC
V DC (0.1
A)
+ −
+
−
+
−
Number of Input/Output Points
Input
Common
Subject Matter
Internal Module Circuitry
+
20
Internal Module Ci
High speed DC input (I0, I1)
−
+
−
10
+
−
Equivalent Circuit
0
0
24 V DC
D3
2 (4 points/common & 2 points/common)
24 V DC
C0 19.2 to 30 V DC
C0
0 PNP open collector
24 V DC
C0 0
1
Internal Module
Circuitry
ON-time Voltage
DropC0
0 1
2
24 V DC
0
1 3
+V
Maximum Output
Current 2
1
2 C1
3
Maximum Leakage Current
2
3 C1
Maximum Inrush Current
4
3 4
Output
C1
Minimum
Load
Current
L
5
Common
C1
4 5
6
OFF→ON
4
5 6
Response
7
5
Time
6
ON→OFF 7
6
7 V0
Fuse
7 V0
0
V0 0
1
V0
0 1
Derating Chart01 2
2
3
1
2 V1
3
Input
8
2
3 V1
4
3 4
Output V1
5
6
V1
4 C0
5
4
5 C0
4
5
C0
2
C0
Common
パルス出力
Isolation
8 points
+
−
+
−
Output
Common
L
Common
Output Voltage Range
Operating Voltage
Output Type
High
Speed
Circuit
6Optical
points (Source)
+
Number of Occupied
Outputs
COUNTER
24 V
DC
Specifications
−
+
−
24 V DC
+
−
INFORMATION
V0
0
1
2
3
V1
4
5
C0
High speed input: 4.7 kΩ (24 V DC)
Standard input: 6.8 kΩ (24 V DC)
Input
Input Impedance
24 V DC
Number of Input/Output Points
Input Current
Internal Module Ci
ENCODER
Input
+
−
Items
Number of Input Points
Number of Occupied Inputs
Common
Internal Module Circuitry
Input Voltage Range
Input
Operating Voltage
HMI
SENSOR
Wiring Diagram
+
−
Input Specifications (High speed input: I0 to 1 Standard input:I2 to 7)
PLC
Input
8
Input
8
The specifications and prices described in this catalog were valid when the catalog was issued.
Input
Output
8
6
For the latest information, contact our sales persons or see our website.
Output
Input
8 6
Output
6 4
標準出力
標準出力
標準出力
標準出力
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
55
ディレーティング
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
CPU Specifications
■Standard Type《DC Input 8 Points, Relay Output 6 Points》
SJ-00DR-D
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
General Specifications
SJ
Performance Specifications
DL05/06
Items
Supply Voltage
DL205
Supply Voltage Variation
Range
20 to 28 V DC
Power Consumption
Not more than 5 W
(When the communication port is not fed)
D4
Specifications
24 V DC
Items
Control System
Language System
Specifications
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
Number of Instructions
Sequence instructions: 54, program execution control
instructions: 20, data processing instructions: 82,
IBox instructions: 22
Power Source Inrush Current 30 A or less (1 ms or less)
Number of Other Instructions 2
D3
Allowable Instantaneous
Power Failure Time
Up to 10 ms
Processing Speed
Sequence instructions: 0.37 μs ~ Data processing instructions: 2.96μs ~
Programmer
Operating Ambient
Temperature
0˚C to 55˚C IEC60068-2-14 (Temperature change test)
Program Memory Capacity
(Word)
Program 7.5 K + System parameter 0.5 K
Storage Ambient
Temperature
ｰ20˚C to 70˚C
IEC 60068-2-2 (Test Bb high temperature low
humidity)
IEC 60068-2-1 (Test Ab low temperature)
IEC 60068-2-14 (Test Na temperature change)
Use / Storage Ambient
Humidity
30% to 95% (No condensation)
Surrounding Atmosphere in
Place of Use
No corrosive gases Environmental pollution level 2 (UL 840)
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1,000 to 1177)
Vibration Resistance
Compliant with MIL STD 810C, Method 514.2,
IEC60068-2-6, JIS C60068-2-6, and sine wave
oscillation test method
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter (C)
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
Data Register
7,488 word (R 400 to 677, R 1,200 to 7,377, R
10,000 to 17,777)
Impact Resistance
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
Noise Resistance
Compliant with NEMA ICS3-304,
Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI),
EN61000-4-4 (FTB), EN61000-4-5 (Surge),
EN61000-4-8 (Magnetic fields),
RFI: 150, 450 MHz (5W/15cm), EN61000-4-6
(Conducted interference)
Special Register
Accumulator
Data Stack
Password
Input/Output Allocation
PID Function
Soft Filter
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
4 points
Radiation
Conformance Standard
Other
EN55011: 1998 Class A
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Compliant with RoHS
Interruption Function
External interruption: 4 points Timer interruption: 1 point
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
Pulse Catch Function
4 points
High Speed Counter
20kHz Addition counter: 2 ch, Add-Subtract
counter: (Unavailable for AC type)
Pulse output
Operation Mode
20 kHz 1 ch (Unavailable for AC, relay type)
RUN /STOP /TERM
Power Failure Holding
Can retain the bit areas (M, S, T, C), some counter
elapsed value registers, data registers and special
registers during power failures.
Diagnosis Function (Hardware) Watchdog timer
Diagnosis Function
(Software)
Installation
Conforming DIN Rail
Communication Function:
Port 1
Communication Function:
Port 2
56
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
- I/O arrangement check - Program memory check
- Calculation monitoring timer - Communication error
(Programmer port, general-purpose communication port)
DIN rail or 2 screws
TH35Fe /TH35Al
Transmission method: RS-232C compatible (Nonisolated) Transmission speed: 9,600 bps (Fixed)
Connection: 6-pin modular (Female) jack
Protocol: K sequence (S)
Transmission method: RS-232C compatible (Nonisolated) Transmission speed: 300, 600, 1,200,
2,400, 4,800, 9,600, 19,200, 38,400, 57,600,
115,200 bps (Up to 38,400 bps for non-procedures)
Connection: 6-pin modular (Female) jack
Protocol: DirectNET (M/S), MODBUS (M/S), Nonprocedure (M/S), K sequence (S)
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
CPU Specifications
Input Specifications (High speed input: I0-1 Standard input:I2-7)
Items
Number of Input Points
Number of Occupied Inputs
Common
Input Voltage Range
Operating Voltage
Specifications
8 points (Sink/source)
8 points
2 (4 points/common)
24 V DC
21.6 to 26.4 V DC
Input Current
High speed input: 5 mA (24 V DC)
Standard input: 4 mA (24 V DC)
Maximum Input Current
High speed input: 6.0 mA (26.4 V DC)
Standard input: 5.0 mA (26.4 V DC)
On-state Voltage / Current
High speed input: 19 V DC/4.5 mA
Standard input: 19 V DC/3.5 mA
High speed input: 4.7 kΩ (24 V DC)
Standard input:
6.8 kΩ
(24 V DC)
High Speed
Circuit
24 V
DC
OFF→ON
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 2 ms
ON→OFF
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 3 ms
Common
Response
Time
C2
0
1
2
3
C3
4
5
高速入力
Internal Module Circuitry
Input
Output Specifications
Optical Isolation
Items
Number
of Outputs Points
24 V
Specifications
6 points
DC
Number of Occupied
Common
Outputs
8 points
Common
Rated Output Voltage
C0
Operating
Voltage
Internal Module Circuitry
24 V DC
0
240
V
AC
Output TypeOutput C0
L
1
AC Frequency
0
C0
2
Maximum Output Current
10
3
Maximum Inrush Current
1
Common 2
C1
Minimum Load Current
32
4
OFF→ON
Response
C1
53
Time
ON→OFF
4
C1
6
Fuse
2 (4 points/common & 2 points/common)
24 V DC 240 V AC
Up to 30 V DC Up to AC 264 V
V DC
Relay format
A24(SPST)
+
+
−
47 to 63 −Hz
24 V DC
+
+
1.0 A (Points) 4.0
A (C2) 2.0
A (C3)
−
−
24 V DC
+
+
3 A (10 ms)
−
5 mA (5 V− DC)
Up to 15 ms 24 V DC
+
+
Up to 15 −ms
−
24
V
DC
None +
+
+
−
24 V DC
+
−
+
−
24 V DC
L
L
L
24 V DC
240 V AC
L
L
SJ
240 V AC
DL205
Internal M
L
Output
24 V DC
240 V AC
D4
Common
D3
Programmer
DirectSOFT
Optical Isolation
Optical Isolation
Terminator I/O
High Speed Circuit
High Speed Circuit
High Speed Circuit
Common
高速入力
Process Control
高速入力
ZIP LINK
高速入力
Common
Internal Module Circuitry
Standard DC input (I2 to I7)
Input
Internal Module Circuitry
Optical Isolation
Internal Module Circuitry
Input
24 V
DC
Input
24 V
DC
24 V
DC
標準入力
Optical Isolation
Common
Optical Isolation
標準入力
Features
標準入力 8
Common
L
Internal Module Circuitry
Dimensions
4
Output
Internal Module Circuitry
V DC
Relay24 Output
240 V AC
24 V DC
L
240 V AC
L
Input
SpecificationsOutpu
6
Common
24 V DC
240 V AC
CPU 2
Specifications
Output
Internal Module Circuitry
リレー出力
Output
Common
0
Power Supply
Module
リレー出力
0
リレー出力
Input/Output
Common
240 V AC
Derating Chart
Input
DL05/06
24 V DC
L
Common
DC
Internal M
24 V
DC
Internal Module Circuitry
Input
リレー出力
24 V
Common
KOSTAC Safety
Common
AZ-C1
Input
Internal Module Circuitry
Optical Isolation
24 V
DC
24 V
DC
Common
Subject Matter
Internal Module Circuitry
Input
COUNTER
+
−
標準入力
Equivalent Circuit
24 V
DC
Input
INFORMATION
High speed DC input (I0, I1)
54
−
−
24 V DC
7
+
+
65
−
−
Relay life (ON 76→ OFF 1 cycle)
C2
Load Conditions
Life
07
L
24 V DC
C2
30 V DC,
1
L300,000 cycles or more
1 A Resistance loadC2
0
240 V AC
L
L
2
24 V DC
30 V DC,
10
LL
more
L50,000 cycles or240
24
VVDC
AC
1 A Inductive Load 3
LL
21
C3
240
V
AC
250 V AC,
LL
32
L300,000 cycles or more
1 A Resistance Load4
24 V DC
C3
L
L
53
250 V AC,
4
L20,000 cycles or240
V AC
C3
more
24 V DC
1 A Inductive Load
LL
54
24 VVDC
240
AC
L
5
Common
Module
Input
8
Output
6
ディレーティング
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
* Every other point should be turned on.
nput/Output
Output
PointsPoints
put Points
Number of Input/Output Points
Internal M
ENCODER
C0
0
1
2
3
C1
4
5
6
7
Optical Isolation
Input Impedance
SENSOR
Wiring Diagram
High speed input: 4 V DC/0.1 mA
Standard input: 7 V DC/0.5 mA
Off-state Voltage
Input / Current
HMI
Number of Input/Output Points
Internal Module Circuitry
PLC
8
Input
Input
Output
6issued.
The specifications and prices described in this catalog were valid when the catalog was 8
Input
For the latest information, contact our sales persons or see our website.
8
Output
6
4
Output
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
57
ディレーティング
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
CPU Specifications
■Standard Type《AC Input 8 Points, Relay Output 6 Points》
SJ-00AR-D
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
General Specifications
SJ
Performance Specifications
DL05/06
Items
Supply Voltage
DL205
Supply Voltage Variation
Range
20 to 28 V DC
Power Consumption
Not more than 5 W
(When the communication port is not fed)
D4
Specifications
24 V DC
Items
Control System
Language System
Specifications
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
Number of Instructions
Sequence instructions: 54, program execution control
instructions: 20, data processing instructions: 82,
IBox instructions: 22
Power Source Inrush Current 30 A or less (1 ms or less)
Number of Other Instructions 2
D3
Allowable Instantaneous
Power Failure Time
Up to 10 ms
Processing Speed
Sequence instructions: 0.37 μs ~ Data processing instructions: 2.96 μs ~
Programmer
Operating Ambient
Temperature
0˚C to 55˚C IEC60068-2-14 (Temperature change test)
Program Memory Capacity
(Word)
Program 7.5 K + System parameter 0.5 K
Storage Ambient
Temperature
ｰ20˚C to 70˚C
IEC 60068-2-2 (Test Bb high temperature low
humidity)
IEC 60068-2-1 (Test Ab low temperature)
IEC 60068-2-14 (Test Na temperature change)
Use / Storage Ambient
Humidity
30% to 95% (No condensation)
Surrounding Atmosphere in
Place of Use
No corrosive gases Environmental pollution level 2 (UL 840)
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1,000 to 1177)
Vibration Resistance
Compliant with MIL STD 810C, Method 514.2,
IEC60068-2-6, JIS C60068-2-6, and sine wave
oscillation test method
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter (C)
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
Data Register
7,488 word (R 400 to 677, R 1,200 to 7,377, R
10,000 to 17,777)
Impact Resistance
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
Noise Resistance
Compliant with NEMA ICS3-304,
Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI),
EN61000-4-4 (FTB), EN61000-4-5 (Surge),
EN61000-4-8 (Magnetic fields),
RFI: 150, 450 MHz (5W/15 cm), EN61000-4-6
(Conducted interference)
Special Register
Accumulator
Data Stack
Password
Input/Output Allocation
PID Function
Soft Filter
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
4 points
Radiation
Conformance Standard
Other
EN55011: 1998 Class A
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Compliant with RoHS
Interruption Function
External interruption: 4 points Timer interruption: 1 point
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
Pulse Catch Function
4 points
High Speed Counter
20kHz Addition counter: 2 ch, Add-Subtract
counter: (Unavailable for AC type)
Pulse output
Operation Mode
20 kHz 1 ch (Unavailable for AC, relay type)
RUN /STOP /TERM
Power Failure Holding
Can retain the bit areas (M, S, T, C), some counter
elapsed value registers, data registers and special
registers during power failures.
Diagnosis Function (Hardware) Watchdog timer
Diagnosis Function
(Software)
Installation
Conforming DIN Rail
Communication Function:
Port 1
Communication Function:
Port 2
58
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
- I/O arrangement check - Program memory check
- Calculation monitoring timer - Communication error
(Programmer port, general-purpose communication port)
DIN rail or 2 screws
TH35Fe /TH35Al
Transmission method: RS-232C compatible (Nonisolated) Transmission speed: 9,600 bps (Fixed)
Connection: 6-pin modular (Female) jack
Protocol: K sequence (S)
Transmission method: RS-232C compatible (Nonisolated) Transmission speed: 300, 600, 1,200,
2,400, 4,800, 9,600, 19,200, 38,400, 57,600,
115,200 bps (Up to 38,400 bps for non-procedures)
Connection: 6-pin modular (Female) jack Protocol: DirectNET (M/S), MODBUS (M/S),
Non-procedure (M/S), K sequence (S)
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
CPU Specifications
Items
Number of Input Points
Number of Occupied Inputs
Common
Input Voltage Range
Operating Voltage
AC Frequency
Input Current
Maximum Input Current
Input
On-state Voltage / Current
Off-state Voltage / Current
16 mA (144 V AC/55˚C)
60 Optical
V AC/5
mA
Isolation
20 V AC/2 mA
100 to 120 V AC
AC入力
15 kΩ (50 Hz)
12 kΩ (60 Hz)
Input Impedance
Common
OFF→ON
ON→OFF
Response
Time
Standard 8.5 mA (100 V AC/50 Hz)
Standard 10 mA (100 V AC/60 Hz)
C2
0
1
2
3
C3
4
5
Up to 40 ms
Up to 40 ms
Output Specifications
Items
Number of Outputs Points
Specifications
6 points
Number
of Occupied
Internal Module Circuitry
24 V DC
8 points
240 V AC
Outputs
Output
L
Common
Rated Output Voltage
Operating VoltageC0
Common
0
Output Type
AC Frequency 1
2 C0
Maximum Output Current
Maximum Inrush Current
3 0
Minimum Load Current
C1 1
OFF→ON
Response
4 2
Time
ON→OFF
5 3
Fuse
6
2 (4 points/common & 2 points/common)
24 V DC 240 V AC
Up to 30 V DC Up to 264 V AC
Relay format A (SPST)
47 to 63 Hz 100 to 120 V AC
1.0 A (Points) 4.0 A (C2) 2.0 A (C3)
3 A (10 ms)
5 mA (5 V DC)
100 to 120 V AC
Up to 15 ms
Up to 15 ms 100 to 120 V AC
None
C1
7 4
100 to 120 V AC
Relay life (ON → 5OFF 1 cycle)
C2
Load Conditions 6
Life
0 7 L
24 V DC
30 V DC,
1
L 300,000 cycles or more
1 A Resistance load
240 V AC
2 C2 L
30 V DC,
50,000 cycles or more
1 A Inductive Load3 0 L
L
24 V DC
C3 1
L
250 V AC,
300,000 cycles or more
240 V AC
4
L
1 A Resistance Load 2
L
24 V DC
L
5
250 V AC,
L
3
1 A Inductive Load
20,000 cycles
C3
4
5
INFORMATION
Common
Subject Matter
KOSTAC
SafetyInterna
24 V DC
AZ-C1240 V AC
L
SJ
240 V AC
L
DL05/06
L
L
240 V AC
D4
D3
Programmer
Optical Isolation
AC入力
DirectSOFT
Internal Module Circuitry
Input
Common
Terminator I/O
Optical Isolation
AC入力
Process Control
100 to 120 V AC
Common
ZIP LINK
Relay Output
Internal Module Circuitry
24 V DC
240 V AC
Output
L
Internal Module Circuitry
24 V DC
240 VCommon
AC
Output
L
リレー出力
Features
8
Input
SpecificationsOutpu
6
リレー出力
Common
Dimensions
4
CPU 2
Specifications
240 V AC
0
Power Supply
Module
0
Input/Output
Module
Output
6
Commo
DL205
24 V DC
L
AC Input
Outpu
L
24 V DC
L
Input
8
Comm
100 to 120 V AC
Equivalent
Input Circuit
ディレーティング
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
* Every other point should be turned on.
Input
8
6
nput/Output Points
Number of Input/Output Points
Number of Input/Output Points
100 to 120 V AC
24 V DC
L
Derating Chart
COUNTER
100 to 120 V AC
リレー出力
240more
V AC
or
L
Input
Internal Module Circuitry
100 to 120 V AC
Interna
ENCODER
C0
0
1
2
3
C1
4
5
6
7
8 points
8 points
2 (4 points/common)
100 to 120 V AC
80 to 144 V AC
47 to 63 Hz
Internal Module Circuitry
SENSOR
Wiring Diagram
Specifications
HMI
Number of Input/Output Points
Input Specifications
PLC
4
Output
8
Input
Output
6
The specifications and prices described in this catalog were valid when the catalog was2 issued.
For the latest information, contact our sales persons or see our website.
0
4
ディレーティング
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
59
ディレーティング
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
CPU Specifications
■Analog Type《DC Input 4 Points, Analog Input 2 Channels, DC Output 4 Points, Analog Output 2 Channels》
SJ-02DD1-D
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
General Specifications
SJ
DL05/06
DL205
Items
Supply Voltage
Supply Voltage Variation Range
Power Consumption
Power Source Inrush Current
Specifications
24 V DC
20 to 28 V DC
Not more than 5 W (When the communication port is not fed)
30 A or less (1 ms or less)
D4
Allowable Instantaneous
Power Failure Time
Up to 10 ms
D3
Operating Ambient
Temperature
0˚C to 55˚C IEC60068-2-14 (Temperature change test)
Programmer
DirectSOFT
Terminator I/O
Process Control
ｰ20˚C to 70˚C
IEC 60068-2-2 (Test Bb high temperature low humidity)
IEC 60068-2-1 (Test Ab low temperature)
IEC 60068-2-14 (Test Na temperature change)
Use / Storage Ambient Humidity 30% to 95% (No condensation)
Storage Ambient
Temperature
4 points
20ｋHz Addition counter: 2 ch, Add-Subtract counter: 1 ch
20 kHz 1 ch (Unavailable for relay type)
RUN /STOP /TERM Power Failure Holding
Can retain the bit areas (M, S, T, C), some counter
elapsed value registers, data registers and special
registers during power failures.
Diagnosis Function (Hardware) Watchdog timer, cell voltage fall
Vibration Resistance
Compliant with MIL STD 810C, Method 514.2, IEC600682-6, JIS C60068-2-6, and sine wave oscillation test method
Installation
Conforming DIN Rail
DIN rail or 2 screws
TH35Fe /TH35Al
Impact Resistance
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
Communication Function:
Port 1
Transmission method: RS-232C compatible (Non-isolated)
Transmission speed: 9,600 bps (Fixed) Connection:
6-pin modular (Female) jack Protocol: K sequence (S)
Communication Function:
Port 2
Transmission method: RS-232C compatible (Non-isolated)
Transmission speed: 300, 600, 1,200, 2,400, 4,800,
9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to
38,400 bps for non-procedures) Connection: 6-pin
modular (Female) jack Protocol: DirectNET (M/S),
MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Communication Function:
Port 3
Transmission method: RS-485 compatible (Non-isolated)
Transmission speed: 300, 600, 1,200, 2,400, 4,800,
9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to
38,400 bps for non-procedures) Connection: Terminal
block 3 pins Protocol: DirectNET (M/S), MODBUS
(M/S), Non-procedure (M/S), K sequence (S)
Radiation
Conformance Standard
Other
Compliant with NEMA ICS3-304, Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI), EN61000-4-4
(FTB), EN61000-4-5 (Surge), EN61000-4-8 (Magnetic
fields), RFI: 150, 450 MHz (5W/15 cm), EN61000-4-6
(Conducted interference)
EN55011: 1998 Class A
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Compliant with RoHS
Performance Specifications
Power Supply
Module
Number of Instructions
Sequence instructions: 54, program execution control
instructions: 20, data processing instructions: 82,
IBox instructions: 22
Input/Output
Module
Number of Other Instructions 4
60
Pulse Catch Function
High Speed Counter
Pulse output
Operation Mode
- I/O arrangement check - Program memory check
- Calculation monitoring timer - Communication error
(Programmer port, general-purpose communication port)
Specifications
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
CPU
Specifications
External interruption: 4 points Timer interruption: 1 point
Diagnosis Function
(Software)
Items
Control System
Language System
Dimensions
Interruption Function
No corrosive gases Environmental pollution level 2 (UL 840)
Noise Resistance
Specifications
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
4 points
Surrounding Atmosphere in
Place of Use
ZIP LINK
Features
Password
Input/Output Allocation
PID Function
Soft Filter
Processing Speed
Sequence instructions: 0.37 μs ~ Data processing instructions: 2.96 μs ~
Program Memory Capacity (Word)
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter (C)
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
Data Register
Special Register
Accumulator
Data Stack
Program 7.5 K + System parameter 0.5 K
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1,000 to 1177)
7,488 word (R 400 to 677, R 1,200 to 7,377, R 10,000 to 17,777)
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
Calendar, Clock
Stored data: Year, month, day, day of week, hour,
minute, second (Backup battery: D2-BAT-1)
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Input Specifications (High speed input: I0 to 1 Standard input: I2 to 3)
Items
Number of Input Points
Number of Occupied Inputs
Common
Input Voltage Range
Operating Voltage
Specifications
4 points (Sink/source)
8 points
1 (4 points/common)
24 V DC
21.6 to 26.4 V DC
Input Current
High speed input: 5 mA (24 V DC)
Standard input: 4 mA (24 V DC)
Maximum Input Current
High speed input: 6.0 mA (26.4 V DC)
Standard input: 5.0 mA (26.4 V DC)
On-state Voltage / Current
High speed input: 19 V DC/4.5 mA
Standard input: 19 V DC/3.5 mA
Off-state Voltage / Current
High speed input: 4 V DC/0.1 mA
Standard input: 7 V DC/0.5 mA
Input Impedance
High speed input: 4.7 kΩ (24 V DC)
Standard input: 6.8 kΩ (24 V DC)
Response
Time
OFF→ON
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 2 ms
ON→OFF
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 3 ms
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
CPU Specifications
(Pulse output: Q0 Standard output:Q1 to 3)
Output Specifications
C0
Items 0
Number of Outputs
1 Points
Wiring Input
Diagram
4 points
24 V DC
−
+
Optical Isolation
C0
0
Common
1
24 V
DC
2
3
24 V
C1
DC
0
L
Internal Module Circuitry
Input
L
1
Optical Isolation
L
2
24 V
DC
L
3
Common
+V
24 V
DC
HMI
SENSOR
Internal Module Circuitry
Specifications
+
(Sink)
−
PLC
Internal Module Circuitry
High Speed Circuit
Input
Optical Isolation
Internal M
ENCODER
Input
高速入力
C0
24 V DC
Number of Occupied
24 V
+
−
2
8 points
COUNTER
0
DC
24 V DC
Outputs
− Module Circuitry +
+
−
Internal
High Speed Circuit
3
Common
1
−
+
Input
Common
1 (4 points/common)
C0
Optical Isolation
Common
C1
2
INFORMATION
Output Voltage Range
5 to 27 V DC
5 to027 V
0
L
24 V DC
+
−
High Speed Circuit
Operating Voltage
4 to 30 V DC− DC 3
1
−
+
L
1
−
C1
+
5 to 27
V
Internal
Module
Circuitry
Common
Output Type
NPN open collector
2
+
DC
L
−
2
Input
5 to 27 V
0
L
Optical
ON-time Voltage Drop
0.5 V DC (0.1 A) C0
− Isolation
DC
+
24 V DC
3
−
L
3
Internal M
L
+
1
0
Maximum Output Current
0.1 A (Points) 0.4 A (Common)
−
+
24
V
DC
Input
+
− 24 V
Internal Module Circuitry
High Speed Circuit
+VCurrent 0.1 mA (30 V DC) C1
+
標準入力
L
24 V DC
2
Maximum Leakage
1
DC
−
+
Input Module Circuitry
Common
Internal
5 to 27 V
0 Transmitter 0Lto 5 V
Optical Isolation
Common
24
V
DC
AD1V
L
DC
3
Maximum Inrush Current
150 mA (10 ms) 2
Subject
Matter
Input
−
24 V
C0
Optical Isolation
1 Transmitter 4Lto 20 mA +
DC
−
Common
AD1I
Minimum Load Current
0.2 mA
+V
24 V
3
Transmitter 0 to 5 V
Internal Module Circuitry
KOSTAC Safety
AD1V
+
0
DC
L
2 Transmitter 0 to 5 V
Common
24 V DC
24 V
Input
External Power AD2V
Supply
20 to 28 V DC Up
to 60 mA
AZ-C1
+
−
Transmitter
0 to 5 V
High Speed Circuit
C1
AD1V
Transmitter
4
to
20
mA
Optical
Isolation
DC
AD1I
24 V DC
1
L
3
−
+
Transmitter
4 to520
AD2I
Pulse output: Up to
20 μs,
Standard
μsmA
Common
5 to 27 VTransmitter 4 to 20 mA
0
AD1I
Transmitter 0 to 5 V
AD2V
OFF→ON
2to 0.5 ms L
SJ
DC
+V
24 V
−
Standard
output:
Up
ACOM
Response
Transmitter 0 to 5 V
DC
L
1
AD2V
Transmitter 4 to 20 mA
Internal
Module
Circuitry
Common
− 24 V DC
AD2I
+
3
Transmitter
0
to
5
V
AD1V
Time
Internal
+V
Internal Module
Module Circuitry
Circuitry
Optical
Pulse output: Up to
20
μs,
Standard
5
μs
DA1V
+
Transmitter
4
to
20
mA
L
2
AD2I
ON→OFF
ACOM Isolation
DL05/06
C1
Input
Input
Output
Transmitter 4 to 20 mA
Internal M
Standard output: AD1I
Up
24 V DC
Optical
C0to 0.5 ms L
L
Optical Isolation
Isolation
24 V DC
DA1I
3
ACOM
+V
DA1V
5 to 27 VTransmitter
0
L
Internal Module Circuitry
24 V DC
toV5DC
V
5 to027
Fuse
None
AD2V
0
DC
High
DA2V
Output
−
+V
24 V DC
Optical
+V
DA1V
24
24 V
V
パルス出力
DL205 L
+
−
DA1ISpeed
L
1
High Speed Circuit
Isolation
−
Transmitter
4
to
20
mA
DC
Circuit
DC
+
AD2I
Output Module Circuitry
Common
1
Internal
DA2I
5 to 27 V DC
−
+
L
Internal
Module Circuitry
Transmitter
0 to 5 V Common
DA1I
+
AD1V
DA2V
L
Common
2
−
+ ACOM
Input
5 to 27 V DC Input
2
Analog input specifications
C0
Optical Isolation
Isolation
Internal Module Circuitry
24 V DC
Transmitter
High Optical
DA2V
24 V DC4 to 20 mA
D4
AD1I
Transmitter P/S
Common
DA2I
L
3
Speed Optical
+V
DA1V
30
Circuit
−
Items
Voltage Input Selection
Current
Input
Selection
Transmitter 0 to 5 V
Common+ Module Circuitry Isolation
DA2I
Internal
24
V
DC
AD2V
Output
24
V
+
−
+V
24 V
High Speed Circuit
L
DA1I
Transmitter
P/S
DC
−
+
C1
Input
DC
1
Up to 2 points by AD2I
selecting
current input and voltage
Common
−
+
Transmitter
4 to 20 mA
C0
D3
Optical Isolation
5 to 27 V DC Common
Number of Input Points
Transmitter 0 to 5 V
Transmitter P/S
AD1V
High
DA2V
5 to 27 V
input
02
L
Speed
0
DC
Equivalent
Circuit
ACOM
−
Transmitter 4 to 20 mA
24 V DC
Circuit
AD1I
Internal
24
24VV DC
+
−
Common Module Circuitry
DA2I
High Speed Circuit
13
Input Voltage Range
0 to 5 V
ー L
−
DC
Programmer
+
1
+V
Module Circuitry
DA1V
+ 240Vto
− − +
Internal Module
Module Circuitry
Circuitry Optical
Transmitter
5 V Internal
DC
Internal
AD2V
speed
DC
input
(I0,
I1)
Isolation
+ High
Common
L
Input Current
ー
4
to
20
mA
2
Optical
Output
C1
+V
Input
Transmitter
P/S
2
Input
L
Isolation
DA1I
C0
Optical Isolation
Isolation
Transmitter
Optical
AD2I
24 V DC4 to 20 mA
Internal M
Resolution
12-bit
12-bit LL
Output
30
24 V DC
5 to 27 V
5 to 27 V DC
DirectSOFT
L
High
DA2V
03
DC
+V
Internal Module Circuitry
−
ACOM
Speed
24
V
DC
24
V
DC
標準出力
Input Response Time
50 ms
50
ms
24
VV DC
+V
+
−− 5 to 27 V DC
Internal Module Circuitry
24
L
1
24V
Circuit
High
Speed
Circuit
Optical
C1
+V
+
Output
DC
Common
DC
DA2I
1
+V
L
Common
Isolation
−
+
Optical
Internal Module Circuitry
DA1V
Input Impedance
150 kΩ
200 Ω L
+
0 to 5 V Common
Terminator I/O
−
+ 5 to 27 VTransmitter
Isolation
2
AD1V
Common
Output
L
Output
5 to 27 V DC
Input
L
20
L
Optical
Isolation
DC
Input Stability
Within ±2 LSB DA1I
Within ±2
LSB
Transmitter
P/S
24 V DC4 to 20 mA
−
Transmitter
L
3
AD1I
5 to 27 V DC Internal Module Circuitry
L
524
toV27
V DC
DC
Common
− Standard DC input (I2, I3)
31
+
Gain Error
±1.2% or less DA2V
±1% or less
High Optical
+V
Process Control
Internal
Module Circuitry
Transmitter
0 to 5 V
Speed Isolation
+V
AD2V
+
24 V
Common
L
2
Circuit
C1
DC
Input
Offset Error
±5 mV or less DA2I
±0.1 mA or less
Common
Output
Common
Optical Isolation
Transmitter
L
Transmitter
to 20
5 VmA
24 V DC40 to
AD2I
AD1V
L
+ 5 to 27 V
03
Temperature Accuracy
±100 ppm/˚C or lower
±100 Lppm/˚C −or lower
5 to 27 V DC
ZIP LINK
DC
Transmitter 4 to 20 mA
−
ACOM
Transmitter
P/S
AD1I
+V
24
Internal Module Circuitry
L
24VV DC
1
−
Internal
Module Circuitry
+
DC
Common
24 V DC
Common
+V
Transmitter
0
to
5
V
Optical
DA1V
Internal Module Circuitry
Transmitter
0 to 5 V
+
Optical
AD1V
+V
L
Isolation
2
Analog output specifications AD2V
Output
Isolation
Input
L
Transmitter
DA1I
Optical Isolation
AD2I
Output
Transmitter
4 to
to 20
20 mA
mA
24 V DC4
AD1I
L
3
L
Items
Voltage Output Selection
Current Output Selection
5 to 27 V DC
High
DA2V
ACOM
Internal Module Circuitry
Transmitter
0 to DC
5 V output (Q0)
5 to 27 V DC
Pulse
AD2V
Speed
+V
Internal Module Circuitry
2424V V DC
Up to 2 points by DA2I
selecting
current output and voltage
Circuit
ADxV
DC
Internal
Module Circuitry Optical
+V
Common
Common
Number of Outputs Points
DA1V
24 V DC
Transmitter
4 to
to 520V mA
Common
AD2I
Transmitter
0
Voltage
A/D
output
Isolation
AD1V
Optical
−
+
電圧入力選択
Output
Converter +V
Transmitter
0V
150 kΩ
Isolation
L
DA1I
ACOM ー
Transmitter 4 to 20
Internal Module Circuitry
Transmitter P/S
+ mA
Output
Output Voltage Range
0 to 5 V
AD1I
DC
524
toV27
VL DC Internal Module Circuitry
Voltage
External
ADxVHigh
DA2V
+V
Transmitter
DA1V 4 to 20 mA
Transmitter 0 to Power
5 V Source
Output Current Range
ー
Speed Optical
5 to 27 V DC
AD2V
Voltage
A/D
Circuit Isolation Converter
+
Output
Transmitter L
Common
0V
DA2I
150 kΩ
DA1I
Features External
Transmitter 4 to 20 mA
Resolution
12-bit
12-bit
AD2I
Common +
−
+
Power Source
Internal Module Circuitry
5 to 27 V DC
External
High
DA2V 1 ms
Conversion Time
1 ms
Transmitter P/S
ACOM
ADxVSpeed
PowerInternal
SourceModule
Circuitry
24 V DC
Standard DC output (Q1 to Q3)
Circuit
Voltage
A/D
Specifications
Loop Supply Voltage
ー
18 to 30 V DC
Common Module Circuitry Optical
Internal
DA2I
+V
24 V DC
DA1V
Converter
DA1I
DA2V
2 kΩ or more (Output
DA2I
current 2.5 mA or less)
Gain Error
Offset Error
Temperature Accuracy
±0.8% or less
±5 mV or less
±100 ppm/˚C or lower
+
±1% or less
±0.1 mA or less
±100 ppm/˚C or lower
ディレーティング
8
put/Output
mber of Input/Output
Number
Points Number
of Input/Output
Points
of Input/Output
Points Points
Number of Input/Output Points
ディレーティング
Input・Output
0V
150
kΩ
Isolation
Optical
+V
Output Isolation
External
Output
LDC Source
5 to 27 VPower
Internal
Module Circuitry
High
Internal Module Circuitry
5 to 27 V DC
Speed
ADxV
Circuit
ADxI
Internal
Common Module Circuitry
24 V DC
Voltage
A/D
Voltage
Common
A/D
Optical Converter
+V
Transmitter
0V
150
kΩ
Converter
Transmitter
0V
200 Ω
Isolation
+
Internal Module Circuitry
Output+
L External
External
ADxICircuitry
Internal Module
Internal
Module Circuitry
DC
Power Source
524
toV27
VPower
DC Source
Voltage
A/D
Optical
+V
Converter
Transmitter
0ADxV
V
200
Ω
Isolation
Common
Voltage
A/D
Output+
Converter
Internal
Module
Transmitter L
0V
150 Circuitry
kΩ
External
+DC Source
ADxI
5 to 27 VPower
External
Voltage
A/D
Module Circuitry
24 V DCPowerInternal
Converter
Source
Transmitter
0V
200 Ω
Common
Optical
+V
+
Isolation
External
Output
L
Power
Source
Internal
Internal Module
Module Circuitry
Circuitry
5 to 27 V DC
ADxI
CH Load 2 kΩ Internal Module Circuitry
ADxV
L+
CPU
電流入力選択
Specifications
Voltage
Power
Supply
Transmitter
Module +
Analog voltage input selection
8
ディレーティング
Minimum
DAxV
0V
8
ディレーティング
Voltage
Voltage
A/D
A/D
Common
Converter
Transmitter
00 V
200
Converter
Transmitter
V
150 Ω
kΩ
D/A
+
-Converter
+
External
Module Circuitry
External
CH Load 2 kΩ Internal
InternalModule
ModuleCircuitry
Circuitry
Power Source Internal
Power
Minimum
DAxV Source
ADxV
ADxI
D/A
Voltage
Voltage
A/D
A/D
Converter
0V
Converter
Converter
Transmitter
Transmitter
150 Ω
kΩ
00VV
200
-
External
Power Source
Input/Output
Module
6
ディレーティング
6
Analog current output selection
Ambient Temperature
(˚C)
ディレーティング
CH Load 2 kΩ Internal Module
電圧出力選択
Minimum
0V
電流出力選択
CH Load 250 Ω
Ambient Temperature (˚C)
Ambient Temperature (˚C)
Ambient Temperature (˚C)
ディレーティング
0
4
DAxV
Analog voltage output selection
Internal Module Circuitry
Module
++
-- Circuitry
CH Load 2 kΩ Internal
Minimum
External
External
ADxV
DAxV
Power
Source
Power
Source
Voltage
A/D
Input・Output
D/A
Converter
Transmitter 0 V
Converter
0V
150 kΩ
4
8
2
Internal Module Circuitry
Input・Output
CH Load 250 Ω
+
4
Standard
DAxI
External
Power Source Internal Module Circuitry
2
6
CH Load 2 kΩ Internal Module Circuitry
0
ADxI
ADxV
Minimum D/A DAxV Internal Module Circuitry
2
Converter
CHVoltage
Load
250 Ω
0V
100 Ω
A/D
Converter
0
10
20
304
40 Input・Output
50 55 60
Standard
Transmitter
0
V
+
200
Ω
150D/A
kΩ
DAxI
0
Converter
External
8
+0 V
Power
Source
0
External
18 to 30 V DC
D/A
0
10
20
30
40 Internal50
55Circuitry
60Converter
Module
Power Source
0V
100 Ω
2
InternalCircuitry
Module
ADxI Circuitry
CH Load 250
2 kΩΩInternal Module
6
0
10
20
30
40
50 55 60
+
Minimum
Standard
Voltage
A/D
DAxI
External DAxV
Converter
Transmitter
Power Source
0V
200
Ω
D/A
Input・Output
18 to 30 V DC
0
Internal Module
Circuitry
+
Converter
0V
4
8
D/A
External
ADxI
Converter
0V
100 Ω
Power
KOYO ELECTRONICS INDUSTRIES
0
10
20
30
40
50 55 60
+ Voltage
- Source
A/D CO., LTD.
The specifications and prices described in this catalog were valid when the catalog was issued.
Converter
External
Transmitter
0V
200 Ω
2
6
Internal
Module
Circuitry
CH Load
Ω
Power250
Source
+
For the latest information, contact our sales persons or see our website.
18 to 30 V DC
Standard
DAxI
External
Input・Output
Power Source Internal Module Circuitry
4
Dimensions
Analog current input selection
Derating Chart
6
Transmitter
Number of Input/Output Points
Load Impedance
−
250 Ω (Standard)
Transmitter P/S
Loop supply voltage
18 V DC: Up to 600 Ω
Loop supply voltage
−
+
24 V DC: Up to 900 Ω
Transmitter P/S
Loop supply voltage
30 V DC: Up to 1,200 Ω
GENERAL CATALOG 2016
CH Load 2 kΩ Internal Module Circuitry
ADxI
D/A
Intern
Standard
DAxI
0V
+
External
Power Source
18 to 30 V DC
61
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
CPU Specifications
■Analog Type《DC Input 4 Points, Analog Input 2 Channels, DC Output 4 Points, Analog Output 2 Channels》
SJ-02DD2-D
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
General Specifications
SJ
DL05/06
DL205
Items
Supply Voltage
Supply Voltage Variation Range
Power Consumption
Power Source Inrush Current
Specifications
24 V DC
20 to 28 V DC
Not more than 5 W (When the communication port is not fed)
30 A or less (1 ms or less)
D4
Allowable Instantaneous
Power Failure Time
Up to 10 ms
D3
Operating Ambient
Temperature
0˚C to 55˚C IEC60068-2-14 (Temperature change test)
Programmer
DirectSOFT
Terminator I/O
Process Control
ｰ20˚C to 70˚C
IEC 60068-2-2 (Test Bb high temperature low humidity)
IEC 60068-2-1 (Test Ab low temperature)
IEC 60068-2-14 (Test Na temperature change)
Use / Storage Ambient Humidity 30% to 95% (No condensation)
Storage Ambient
Temperature
4 points
20ｋHz Addition counter: 2 ch, Add-Subtract counter: 1 ch
20 kHz 1 ch (Unavailable for relay type)
RUN /STOP /TERM Power Failure Holding
Can retain the bit areas (M, S, T, C), some counter
elapsed value registers, data registers and special
registers during power failures.
Diagnosis Function (Hardware) Watchdog timer, cell voltage fall
Vibration Resistance
Compliant with MIL STD 810C, Method 514.2, IEC600682-6, JIS C60068-2-6, and sine wave oscillation test method
Installation
Conforming DIN Rail
DIN rail or 2 screws
TH35Fe /TH35Al
Impact Resistance
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
Communication Function:
Port 1
Transmission method: RS-232C compatible (Non-isolated)
Transmission speed: 9,600 bps (Fixed) Connection:
6-pin modular (Female) jack Protocol: K sequence (S)
Communication Function:
Port 2
Transmission method: RS-232C compatible (Non-isolated)
Transmission speed: 300, 600, 1,200, 2,400, 4,800,
9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to
38,400 bps for non-procedures) Connection: 6-pin
modular (Female) jack Protocol: DirectNET (M/S),
MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Communication Function:
Port 3
Transmission method: RS-485 compatible (Non-isolated)
Transmission speed: 300, 600, 1,200, 2,400, 4,800,
9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to
38,400 bps for non-procedures) Connection:
Terminal block 3 pins Protocol: DirectNET (M/S),
MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Radiation
Conformance Standard
Other
Compliant with NEMA ICS3-304, Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI), EN61000-4-4
(FTB), EN61000-4-5 (Surge), EN61000-4-8 (Magnetic
fields), RFI: 150, 450 MHz (5W/15 cm), EN61000-4-6
(Conducted interference)
EN55011: 1998 Class A
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Compliant with RoHS
Performance Specifications
Power Supply
Module
Number of Instructions
Sequence instructions: 54, program execution control
instructions: 20, data processing instructions: 82,
IBox instructions: 22
Input/Output
Module
Number of Other Instructions 4
62
Pulse Catch Function
High Speed Counter
Pulse output
Operation Mode
- I/O arrangement check - Program memory check
- Calculation monitoring timer - Communication error
(Programmer port, general-purpose communication port)
Specifications
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
CPU
Specifications
External interruption: 4 points Timer interruption: 1 point
Diagnosis Function
(Software)
Items
Control System
Language System
Dimensions
Interruption Function
No corrosive gases Environmental pollution level 2 (UL 840)
Noise Resistance
Specifications
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
4 points
Surrounding Atmosphere in
Place of Use
ZIP LINK
Features
Password
Input/Output Allocation
PID Function
Soft Filter
Processing Speed
Sequence instructions: 0.37 μs ~ Data processing instructions:2.96 μs ~
Program Memory Capacity (Word)
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter (C)
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
Data Register
Special Register
Accumulator
Data Stack
Program 7.5 K + System parameter 0.5 K
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1,000 to 1177)
7,488 word (R 400 to 677, R 1,200 to 7,377, R 10,000 to 17,777)
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
Calendar, Clock
Stored data: Year, month, day, day of week, hour,
minute, second (Backup battery: D2-BAT-1)
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Input Specifications (High speed input: I0 to 1 Standard input: I2 to 3)
Items
Number of Input Points
Number of Occupied Inputs
Common
Input Voltage Range
Operating Voltage
Specifications
4 points (Sink/source)
8 points
1 (4 points/common)
24 V DC
21.6 to 26.4 V DC
Input Current
High speed input: 5 mA (24 V DC)
Standard input: 4 mA (24 V DC)
Maximum Input Current
High speed input: 6.0 mA (26.4 V DC)
Standard input: 5.0 mA (26.4 V DC)
On-state Voltage / Current
High speed input: 19 V DC/4.5 mA
Standard input: 19 V DC/3.5 mA
Off-state Voltage / Current
High speed input: 4 V DC/0.1 mA
Standard input: 7 V DC/0.5 mA
Input Impedance
High speed input: 4.7 kΩ (24 V DC)
Standard input: 6.8 kΩ (24 V DC)
Response
Time
OFF→ON
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 2 ms
ON→OFF
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 3 ms
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
CPU Specifications
Input
Wiring Diagram
Optical Isolation
Internal Module Circuitry
Internal Modu
Items
0
Number of Outputs Points
1
Input
Specifications
24 V
High Speed Circuit Optical Isolation
C0 24 V DC
C0
DC
4 points (Source)
Common
0
0
24 V
24 V DC
24 V DC
High Speed Circuit
Number of Occupied 2
DC
Internal Module Circuitry
8 points
1
1
Outputs
Common
Input
3
Optical Isolation
C0
2
2
Common
1 (4 points/common)
V0
0
3
3
24
V
Output Voltage Range
24 V DC
24 V DC
High Speed Circuit
DC
L
0
1 24 V DC
V0
Operating Voltage
19.2 to 30 V DC V0
Internal
Module Circuitry
Common
Internal Module Circuitry
L
1
Input
2
L
L
0
Output Type
PNP open collector 0
Input
Optical Isolation
24 V DC
24 V DC
Optical Isolation
C0
L
2
Internal Module Circuitry
L
3DC (0.1A)
L
1
Pulse output: 1.0 V 1
L
0
ON-time Voltage Drop 3
24 V
Input
24 V DC
High Speed Circuit
Standard output: 0.5
24 V
Optical Isolation
DC L
V0
2 V DC (0.1A) L
2
DC
Common
1
C0
Common
Maximum Output Current
0.1 A (Points) 0.43
L
0A (Common) L
3
Internal Module Circuitry
24 V
24 V DC
Transmitter 0 to 5 V
AD1V 0.1 mA (30 V DC) 2
DC
Maximum Leakage Current
Internal
Module Circuitry
Input
Common
L
1
C0
C0
Optical Isolation
3
Transmitter
4
to
20
mA
C0
Input
AD1I
Maximum Inrush Current
150 mA (10ms) AD1V
Optical Isolation
L
Transmitter 0 to 5 V
Transmitter
0 to 5 V
2
AD1V
V0
Transmitter 0 to 5 V
0
24 V
AD2V 0.2 mA
Minimum Load Current
24 V DCTransmitter 4 to 20 mA
High
L
Transmitter 4 to 20
mASpeed Circuit
3
DC
AD1I
AD1I
24 V
L
0
Transmitter
4 to 20 mA
120 μs, Standard
AD2I
DC
Common
Pulse output: Up to
5 μs
24 V DC
Common
Transmitter 0 to 5 V
Transmitter 0 to 5 V
C0
AD2V
AD2V
OFF→ON
Internal Module Circuitry
2to 0.5 ms L
ACOM Standard output: Up1
Response
0 to 20
5 VmA
Transmitter 4
Transmitter 4 to 20 mA
Input
AD1V
AD2I
AD2I
Optical Isolation
24 V DC Internal Module Circuitry
320 μs, StandardL 5 μs
Time
DA1V Pulse output: Up to 2
Internal Module Circuitry
Transmitter 4 to 20 mA+V
ON→OFF
AD1I
ACOM
ACOM
Optical
L
Standard
output:
Up
to
0.5
ms
3
V0
Input
DA1I
VIsolation
V DC Internal Module Circuitry Optical Isolation
High 24 24
Transmitter 0 to 5 V
AD2V
DA1V
DA1V Speed
DC
C0
+VCommon
C0
L
Fuse
0
Circuit
DA2V None
Optical
Internal Module Circuitry
24 V DC
Transmitter 4 to 20 mA
AD2I
DA1I
Output DA1I
Isolation
0
24 V
High
Internal
Transmitter
0
to
5
V
L
L
24
V
DC
High Speed Circuit
1
Input Module Circuitry
AD1V
DA2I
DC
Speed
Optical Isolation
Common
Input
ACOM
Circuit
C0
DA2V
1
− DA2V
+
Optical Isolation
Transmitter 4 to 20 mA
L
Common
2
AD1I
Output
Analog input specifications
Internal Module Circuitry
24 V
L DC
Transmitter
DA1V
DA2I
0P/S
DA2I
2
24 V
+V
Common
L
Transmitter 0 to 5 V
24 V DC
High Speed Circuit
3
AD2V
+
−
+
Optical
Items
Voltage Input Selection
Current Input −Selection
24DC
V
DA1I
1
Isolation
3
DC
Internal
Module Circuitry
High
Common
Common
Transmitter
4
to
20
mA
Transmitter
P/S
Transmitter
P/S Speed
C0
Up to 2 points by AD2I
selecting
current
input
and
voltage
Input
Circuit
DA2V
2
V0
Number of Input Points
Optical Isolation
Transmitter 0 to 5 V
input
ACOM
Output
C0
AD1V
Equivalent
Circuit 24 VL DC Internal
DA2I
Module Circuitry
L
03
Internal Module Circuitry
Common
Transmitter
4
to
20
mA
24 V DC
DA1V
0
AD1I
Input Voltage Range
0 to 5 V
ー
−
+ 24
24 V
24 V DC
+V
V DC
High Speed Circuit
Internal
DC
L
V0
Internal Module
Module Circuitry
Circuitry
1
High
Optical
Transmitter
0 tospeed
5 V +VDC input (I0, I1) Optical
Input Current
ー
4 to 20 mATransmitter P/S
DA1I
1
AD2V
Isolation
Isolation Internal
Module Circuitry
Input
High
Common
Input
Optical
LL
0
Speed
Optical Isolation
Isolation
2
24 V DC
Transmitter 4 to 20 mA
C0
Resolution
12-bit
12-bit
24 V DC
Circuit
DA2V
2
AD2I
+V
Optical
Internal Module Circuitry Isolation
Output
LL
31
Output
L
Input Response Time
50 ms
50 ms
L
24
0
DA2I
3
ACOM
24 V
V
Input
24 V DC
Common
High Speed Circuit
DC
Common
DC
Optical Isolation
L
Common
2
−
+
C0
24 V DC Internal Module Circuitry
Input Impedance
150 kΩ
200 Ω
1
V0
DA1V
Output
Internal
Module Circuitry
+VCommon
Transmitter
P/S
L
L
Transmitter 0 to 5 V
3
24 V DC
Optical
Input Stability
Within ±2 LSB AD1V
Within ±2
LSB
Common
24 V
20
L
DA1I
+V
Isolation
High Optical
24 V DC
Standard
DC input (I2, I3) DC
Common
Transmitter
4 to 20 mA
C0
Speed Isolation
AD1I
Gain Error
±1.2% or less DA2V
±1% orL less
Internal Module Circuitry
31
Circuit
Transmitter 00 to
to 55 VV
Output
Transmitter
Input
AD1V
Offset Error
±5 mV or less AD2V
±0.1 mA
or less
L
Optical Isolation
V0
L
2
DA2I
Output
Common
L
Transmitter 44 to
to 20
20 mA
mA
Transmitter
+
Temperature Accuracy
±100 ppm/˚C orAD2I
lower
±100 LLppm/˚C −or lower
Internal
Module Circuitry
AD1I
Common
03
24 V DC
24
V
DC
24
V
Transmitter P/S
Transmitter 0 to 5 V
+V
AD2V
ACOM
DC
Internal
Module Circuitry Optical
L
Common
1
Isolation
C0
Module Circuitry
24 V DC Internal
Transmitter 4 to 20 mA
Input
AD2I
DA1V
Optical Isolation
L
Analog output specifications AD1V
2
+V
Transmitter 0 to 5 V
Optical
Output
ACOM
DA1I
Isolation
L
L Output Selection
High
3
Transmitter
4 to DC
20 mA
Circuitry
Items
Voltage Output Selection
Current
AD1I
Pulse
output (Q0) Internal Module
24 V24 V DC Internal
Module Circuitry
Common
Speed
DC
ADxV
Internal
Module
Circuitry
DA1V
Circuit
DA2V
+VCommon
C0
to 5 V
Up to 2 points by selecting
current output and voltage Transmitter 0 Voltage
24 V DC Output
AD2V
A/D
Optical
Number of Outputs Points
Internal Module
Circuitry
L
Converter
Optical
DA1I
Transmitter
DA2I
Isolation
0V
150 kΩ +V
output
Transmitter
High Isolation
Common
Transmitter 04 to
to 520V mA
AD1V
ADxV
AD2I
Speed
+
−
+
Circuit
DA2V
Voltage
A/D
Transmitter 4 to 20 mA External
Output Voltage Range
0 to 5 V
AD1I
Transmitter P/S
Converter
ACOM ー
Transmitter Output
0V
150 kΩ
Power Source
L
Output
DA2I
Module
+
- Circuitry
Output Current Range
ー
Transmitter 0 to 5 V
24 LV DC Internal
Common
AD2V
DA1V 4 to 20mA
−
+
Common
+VExternal
Internal Module Circuitry
Resolution
12-bit
12-bit
Optical
Power Source
Transmitter 4 to 20 mA
Transmitter P/S
AD2I
ADxV
DA1I
Isolation
High
Voltage
A/D
Speed
Conversion Time
1ms
1ms
Standard DC output (Q1 to Q3)
ACOM
Converter
Circuit
DA2V
Transmitter
0V
150 kΩ
Internal Module Circuitry
Module
Output
Loop Supply Voltage
ー
18 to 30 V DC
+
- Circuitry
24 VL DC Internal
DA1V
DA2I
+V
External
Optical
Common
Optical
−
+
Isolation
Power Source
250Ω (Standard)
Internal Module
Circuitry
DA1I
Isolation
High
Internal
Module Circuitry
ADxV
Loop supplyTransmitter
voltage P/S
Speed
24 V DC
Circuit
DA2V 18 V DC: Up to 600 Ω
Voltage
A/D
+V
Output
Internal Module Circuitry
Optical
Output
L
Converter
Transmitter
0V
150 kΩ
Isolation
2 kΩ or more (Output
L
ADxI
Common
DA2I
Load Impedance
Loop supply voltage
+
Common
Voltage
current 2.5 mA or less)
A/D
Internal Module Circuitry
External
24 V DC: Up to −900+Ω
Converter
Transmitter
0V
200 Ω
OutputSource
Power
ADxI
Transmitter P/S
+
- selection L
Loop supply
voltage
Analog voltage
input
Internal
Module
Circuitry
Voltage
Common
Internal Module Circuitry A/D
External
24 V DC
Converter
Transmitter
30 V DC: Up to 1,200 Ω
0V
200 Ω
Power Source
ADxV
+V
Optical
±0.8% or less
±5mV or less
±100 ppm/˚C or lower
Gain Error
Offset Error
Temperature Accuracy
±1% or less
±0.1 mA or less
±100 ppm/˚C or lower
ディレーティング
8 ディレーティング
ディレーティング
Number of Input/Output Points
umber
t/Output
of Points
Input/Output
Number ofNumber
Input/Output
Pointsof Input/Output
Points
Points
Number of Input/Output Points
6
-
ENCODER Input
高速入力
24 V
DC
COUNTER
Common
INFORMATION
Internal Modu
Input
標準入力
Common
24 V
DC
Subject
Matter
Common
KOSTAC Safety
AZ-C1
SJ
DL05/06
24 V DC Internal Module
+V
パルス出力
DL205
D4
L
Output
Common
D3
Programmer
24 V DC
Internal Module
+V
DirectSOFT
標準出力
Terminator
I/O
Output
L
Common
Process Control
ZIP LINK
電圧入力選択
Voltage
Transmitter
Features
+
-
External
Power Source
Specifications
Dimensions
CPU
Specifications
電流入力選択
Power
Supply
Voltage
Module
Transmitter
+
-
External
Input/Output
Module Power Source
Analog current input selection
Derating Chart
8
+
Isolation
A/D
External
Converter
0V
Internal
Module
150 Circuitry
kΩ
Power Source
+
ADxI
Internal
Module Circuitry
Output
External
Voltage
A/D
24 VL DC
Source
Converter
Transmitter Power
Common
0V
200 Ω
+V
Optical
+
Isolation
External
Power Source
Internal Module Circuitry
Output
Internal
ADxI Module Circuitry
L
Internal
Module
Circuitry
CH Load 2 kΩ
ADxV
Common
Voltage
A/D
Minimum
DAxV
Converter
Voltage
Transmitter
A/D
0V
200 Ω
D/A
Converter
Transmitter
0V
150 kΩ
+
- Circuitry
Module
CH
Load
2 kΩ Internal
Internal Module Circuitry
Converter
0V
+
Minimum
External
DAxV
ADxV
Power
Source
External
D/A
Voltage Power Source
A/D
Converter
Internal
Module
Converter
Transmitter 0 V
0V
150 Circuitry
kΩ
Voltage
Transmitter
ディレーティング
HMI
SENSOR
Internal Module Circuitry
(Pulse output: Q0 Standard output: Q1 to 3)
Output Specifications
C0
PLC
Ambient Temperature (˚C)
ディレーティング
Ambient Temperature (˚C)
Analog current output selection
Ambient Temperature (˚C)
GENERAL CATALOG 2016
Input・Output
ディレーティング
+
-
D/A
DAxV
0V
Analog voltage output selection
Ambient Temperature (˚C)
0
Minimum
8
ADxI
+
Module Circuitry
External
CHVoltage
Load 2 kΩ Internal
A/D
Input・Output 6
Converter
Transmitter Power
Minimum
0V
200 Ω
DAxV Source
Internal
Module
Circuitry
6
4
+
ADxV
D/A
Converter
0 External
V
Input・Output
Voltage
Input・Output
A/D
8
Power Source
4
Converter
4
Transmitter
0V
150 kΩ
2
Internal Module Circuitry
CH Load 250 Ω
+
Standard
DAxI
External
Module Circuitry
CH Load 2 kΩ Internal
Internal Module Circuitry
6
2
2
Power
Minimum
DAxV Source
0
Internal Module
ADxV Circuitry
CH Load 250 Ω
Internal Module Circuitry
D/A
D/A
Voltage
Standard
A/D
Input・Output
DAxI
0V
100 Ω Transmitter Converter
ADxI
Converter
0V
Converter
0
V
150
kΩ
0
10
20 4
40
50 55 60
8
0 30
0+
Voltage
A/D
+
External
D/A
Converter
Transmitter
0V
200
Ω
External0 V
Power Source
Internal
Converter
100 ΩModule Circuitry
+ 40 Source
- 50 55 60
0
10
20
30
40
50 55 60
18 0
to 30 V DC 10
20
30
Power
2
+
ADxI
6
Internal Module Circuitry
CH Load 250 Ω External
External
CH Voltage
Load
2 kΩ Internal Module Circuitry
A/D
Standard
Power Source
DAxI
Power Source
Minimum
Converter
DAxV
Transmitter
0V
200 Ω
18 to 30 V DC
Input・Output
0
+
4
D/A
Converter D/A
0V
External
Converter
0V
100 Ω
8
KOYO ELECTRONICS INDUSTRIES CO., LTD.
Power Source
0
10
20
30
40
50 55 60
Internal Module Circuitry
+
The specifications and prices
described in this catalog were valid when the catalog was issued.
2
External
ADxI
Internal Module Circuitry
CH Load
250
Ω
Power
Source
For the latest information,6contact our sales persons or see our website.
Voltage
A/D
18 to 30 V DC
Standard
DAxI
Converter
Transmitter
0V
200 Ω
ディレーティング
CH Load 2 kΩ Internal Modul
電圧出力選択
CH Load 250 Ω
電流出力選択
Standard
DAxI
Intern
0V
+
External
Power Source
18 to 30 V DC
63
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
CPU Specifications
■Analog Type《DC Input 4 Points, Analog Input 2 Channels, Relay Output 4 Points, Analog Output 2 Channels》
SJ-02DR-D
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
General Specifications
SJ
DL05/06
DL205
Items
Supply Voltage
Supply Voltage Variation Range
Power Consumption
Power Source Inrush Current
Specifications
24 V DC
20 to 28 V DC
Not more than 5 W (When the communication port is not fed)
30 A or less (1 ms or less)
D4
Allowable Instantaneous
Power Failure Time
Up to 10 ms
D3
Operating Ambient
Temperature
0˚C to 55˚C IEC60068-2-14 (Temperature change test)
DirectSOFT
Storage Ambient
Temperature
ｰ20˚C to 70˚C
IEC 60068-2-2 (Test Bb high temperature low humidity)
IEC 60068-2-1 (Test Ab low temperature)
IEC 60068-2-14 (Test Na temperature change)
Terminator I/O
Use / Storage Ambient Humidity 30% to 95% (No condensation)
Programmer
Process Control
ZIP LINK
Surrounding Atmosphere in
Place of Use
Vibration Resistance
Impact Resistance
Noise Resistance
Features
Specifications
Dimensions
Radiation
Conformance Standard
Other
No corrosive gases Environmental pollution level 2 (UL 840)
Compliant with MIL STD 810C, Method 514.2, IEC600682-6, JIS C60068-2-6, and sine wave oscillation test method
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
Compliant with NEMA ICS3-304, Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI), EN61000-4-4
(FTB), EN61000-4-5 (Surge), EN61000-4-8 (Magnetic
fields), RFI: 150, 450 MHz (5W/15cm), EN61000-4-6
(Conducted interference)
EN55011: 1998 Class A
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Compliant with RoHS
Performance Specifications
Items
Control System
Language System
Specifications
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
Power Supply
Module
Number of Instructions
Sequence instructions: 54, program execution control
instructions: 20, data processing instructions: 82,
IBox instructions: 22
Input/Output
Module
Number of Other Instructions 4
CPU
Specifications
64
Processing Speed
Sequence instructions: 0.37 μs ~ Data processing instructions:2.96 μs ~
Program Memory Capacity (Word)
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter (C)
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
Data Register
Special Register
Accumulator
Data Stack
Program 7.5 K + System parameter 0.5 K
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1,000 to 1177)
7,488 word (R 400 to 677, R 1,200 to 7,377, R 10,000 to 17,777)
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
Calendar, Clock
Stored data: Year, month, day, day of week, hour,
minute, second (Backup battery: D2-BAT-1)
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Password
Input/Output Allocation
PID Function
Soft Filter
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
4 points
Interruption Function
External interruption: 4 points Timer interruption: 1 point
Pulse Catch Function
High Speed Counter
Pulse output
Operation Mode
4 points
20ｋHz Addition counter: 2 ch, Add-Subtract counter: 1 ch
20 kHz 1 ch (Unavailable for relay type)
RUN /STOP /TERM Power Failure Holding
Can retain the bit areas (M, S, T, C), some counter
elapsed value registers, data registers and special
registers during power failures.
Diagnosis Function (Hardware) Watchdog timer, cell voltage fall
Diagnosis Function
(Software)
- I/O arrangement check - Program memory check
- Calculation monitoring timer - Communication error
(Programmer port, general-purpose communication port)
Installation
Conforming DIN Rail
DIN rail or 2 screws
TH35Fe /TH35Al
Communication Function:
Port 1
Transmission method: RS-232C compatible (Non-isolated)
Transmission speed: 9,600 bps (Fixed) Connection:
6-pin modular (Female) jack Protocol: K sequence (S)
Communication Function:
Port 2
Transmission method: RS-232C compatible (Non-isolated)
Transmission speed: 300, 600, 1,200, 2,400, 4,800,
9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to
38,400 bps for non-procedures) Connection: 6-pin
modular (Female) jack Protocol: DirectNET (M/S),
MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Communication Function:
Port 3
Transmission method: RS-485 compatible (Non-isolated)
Transmission speed: 300, 600, 1,200, 2,400, 4,800,
9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to
38,400 bps for non-procedures) Connection:
Terminal block 3 pins Protocol: DirectNET (M/S),
MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Input Specifications (High speed input: I0 to 1 Standard input: I2 to 3)
Items
Number of Input Points
Number of Occupied Inputs
Common
Input Voltage Range
Operating Voltage
Specifications
4 points (Sink/source)
8 points
1 (4 points/common)
24 V DC
21.6 to 26.4 V DC
Input Current
High speed input: 5 mA (24 V DC)
Standard input: 4 mA (24 V DC)
Maximum Input Current
High speed input: 6 mA (26.4 V DC)
Standard input: 5 mA (26.4 V DC)
On-state Voltage / Current
High speed input: 19 V DC/4.5mA
Standard input: 19 V DC/3.5mA
Off-state Voltage / Current
High speed input: 4 V DC/0.1mA
Standard input: 7 V DC/0.5mA
Input Impedance
High speed input: 4.7 kΩ (24 V DC)
Standard input: 6.8 kΩ (24 V DC)
Response
Time
OFF→ON
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 2 ms
ON→OFF
High speed input: Up to 20 μs, Standard 5 μs
Standard input: Up to 10 ms, Standard 3 ms
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
CPU Specifications
Output Specifications
Specifications
Internal M
C0
0
Internal Module
Circuitry −
24 V DC
Internal Module Circuitry
Input
+
Input
1
Optical Isolation
Optical Isolation
2
Internal Module Circuitry
3
24 V
High Speed Circuit
Input
DC
C1
Optical Isolation
Common
Common
L
0
24 V DC
Internal Module Circuitry
24LV
1
240 V AC
DC
Input
L
2
Common
Optical Isolation
L
3
4 points
8 points
1 (4 points/common)
C0
24 V DC 240 V AC
Up to 30 V DC Up 0to 264
High Speed Circuit
24 V DC
−
24 V V
DCAC −
24 V
DC
+
1
+
Relay format A (SPST)
C0
47 to 63 Hz
2
0
High Speed Circuit
24 V DC
1.0 A (Points)
−
3
+
1
3 A (10 ms)
C1
2
C0
5 mA (5LV DC)
L
0
24 V DC
24 V DC
3
0
Up to 15L ms
L
High Speed Circuit
24 V DC
24 V
1
240 V AC −
240 V AC
Internal Module Circuitry
Internal Module Circuitry DC
C1
+
Up to 15L ms
1
Transmitter 0 to 5 V
L
Internal Module Circuitry
2
AD1V
Input
Common
Input
Input
L
None L
0
2
Optical Isolation
L
Transmitter
4 to 20 mA
Optical Isolation
3
24 V DC
AD1I
Optical Isolation
L
1
3
C0
Transmitter 0 to 5 V
240 V AC
AD2V
Internal Module Circuitry
Analog input specifications
L
24 V
2
C1
0
Input
Transmitter 4 to 20 mA
Transmitter
0 to 524
VV
High Speed Circuit
DCV
Transmitter 0 to 5 V
24 V DC
24
−
DC
AD2I
AD1V
AD1V
DC
Optical Isolation
L
Items
Voltage Input Selection
Current
Input
Selection
L
3
+
0
1
Common
Transmitter
4 to 20 mA
Common
Transmitter
4
to
20
mA
ACOM
24
V
DC
AD1I
AD1I Up to 2 points by selecting current input and voltage input
Common
Number of Input Points
L
1
2
0 to 5 V
Transmitter 0 to 5 V
240 Transmitter
V AC
DA1V
AD2V ー
Internal Module Circuitry
24 V
Input Voltage Range AD2V 0 to 5 V
Transmitter
0
to
5
V
L
DC
2
3
AD1V
Transmitter 4 to 20 mA
Input
Transmitter 4 to 20 mA
DA1I
AD2I
AD2I ー
Input Current
4 to 20L mA
Common
Transmitter 4 to 20 mA
Optical Isolation
3
C1
AD1I
Internal Module Circuitry
DA2V
ACOM
ACOM
Resolution
12-bit
12-bit
Input
Transmitter 0 to 5 V
L
0
AD2V
DA2I
24 V DC
DA1V
Optical Isolation
Input Response Time DA1V 50 ms
50 ms
24 V
4 to 5
20VmA
−
+
Transmitter 0
L
C0
DC
1
AD2I
AD1V
240 V AC
DA1I
DA1I
InternalP/S
Module Circuitry
DC
Input Impedance
150 kΩ
200 Ω
Internal Module Circuitry 24 VTransmitter
24 V DC
Common
Transmitter 4 to 20240
mAV AC
L
0
240 V AC
2
ACOM
High Speed Circuit
AD1I
24 V DC
Input Module Circuitry
24 V
−
Internal
Output
Input Stability
DA2V Within ±2 LSB DA2V Within ±2 LSB
Output
DC
L
L
Optical Isolation
L
+
Transmitter
0 to 5 V
1
Input
3
DA1V
AD2V
Gain Error
±1% or less
Common
DA2I ±1.2% or less DA2I
Optical Isolation
Equivalent
Circuit
Transmitter
4 to 20 mA
−
+
2+
− AD2I
Internal Module Circuitry
24 V DC
C0
Offset Error
±5 mV or less DA1I
±0.1 mATransmitter
or less P/S
24240
V V AC
Transmitter
P/S
Transmitter 0 to 5 V
3
DC
DA2V
Output
ACOM
AD1V
Internal
Module
Circuitry
0
High speed DC Common
input (I0, I1) 24 V L Common
Temperature Accuracy
±100 ppm/˚C or lower
±100 ppm/˚C or lower
High Speed Circuit
24 V DC
−
DC
Common
Input
Transmitter 4 to 20 mA
C1
DA2I
DA1V
AD1I
+
1
Optical Isolation
−
+
Common
L
Transmitter 0 to 5 V
0
Analog output specifications DA1I
C0
AD2V
2
Internal Module Circuitry
24 V DC
Transmitter P/S 24 V DC
240 V AC
L
Transmitter 4 to 20 mA
01
Common
DA2V
AD2I
Output
Items
Voltage Output Selection
Current
Output Selection
3
High Speed Circuit
240
24 V DCV AC −
24 V
L
Internal Module Circuitry
DC
L
+
12 current output
Number of Outputs Points
Up to 2 points by selecting
and voltage output
Input
DA2I
ACOM
C1
Common
−
+
Optical Isolation
Output Voltage Range
0 to 5 V
ー LL
23
DA1V
0
Transmitter P/S 24 V DC
Standard DC input ( I2 - I3 ) 24 V DC Internal
Output Current Range
ー
4 to 20L mA
31
DA1I
CommonModule Circuitry
240 V AC
24 V
240 V AC Internal Module Circuitry
Transmitter 0 to 5 V
DC
Resolution
12-bit
12-bit L
AD1V
C1
DA2V
Output
2
Input
L
Common
Transmitter 4 to 20 mA
Conversion Time
1 ms
1 ms LL
Optical Isolation
AD1I
03
DA2I
24 V DC
−
+
Transmitter 0 to 5 V
Loop Supply Voltage
ー
18 to 30
L V DC
AD2V
1
Transmitter P/S 240 V AC
Transmitter 4 to 20 mA
ΩL (Standard)
Transmitter 0 to 5 V
30 V DC,
1 A Inductive Load
50,000 cycles or more
250 V AC,
1 A Resistance Load
300,000 cycles or more
250 V AC,
1 A Inductive Load
20,000 cycles or more
ディレーティング ディレーティング
8
6
t/Output
mber ofNumber
Points
Input/Output
of
Number
Input/Output
Points
of Input/Output
Points Points
Number of Input/Output Points
Derating Chart
8
6
Input・Output 8
4
4
2
0
6
2
8
4
0
6
2
ディレーティング
ディレーティング
Input・Output
Internal Module Circuitry
24 V
Common
DC
Input
Internal Module Circuitry
Internal Module Circuitry
Optical Isolation
Common
ADxV
ADxV
Transmitter 4 to 20 mA
Voltage
Transmitter 0 to
5V
Transmitter
Transmitter 4 to 20 mA
+
10
20
0
-
External
Power Source
Transmitter 0 to 5 V
Transmitter 4 to 20 mA
24 V DC
Voltage
Transmitter
0V
Input・Output
Internal Module Circuitry
External
Internal Module Circuitry
Voltage
Transmitter
Voltage
200 Ω
L
+
External
Power Source
A/D
Converter
+
Voltage
Transmitter
8
-
+ External
CommonPower
Source
Voltage
External
Transmitter Power Source
Analog
current input selection
ディレーティング
Internal
ADxI Module Circuitry
ADxV
0V
Transmitter
+
External
Power Source
A/D
Converter
200 Ω
A/D
Converter
0V
150 kΩ
Internal Module Circuitry
ADxI
0V
200 Ω
A/D
Converter
Internal Module Circuitry
ADxI
6
Analog
voltage output selection
4
2
Analog
current output selection
0
CH Load 250 Ω
Standard
0
10
Internal Module Circuitry
Internal ModuleCH
Circuitry
Load 250 Ω
D/A
Converter
+0 V
Standard
DAxI
DAxI
Internal Module Circuitry
20
30
40External 50 ADxI
55 60
Power Source
D/A
D/A
Voltage
A/D
Converter
Converter
0V
100 Ω Transmitter Converter0 V
0100
V ΩCircuitry
200 Ω
InternalCircuitry
Module
CH Load
Load 2
250
ΩInternal Module
CH
kΩ
+
Standard
Minimum
DAxI
DAxV
External +
Power Source
Internal ModuleD/A
Circuitry
18 to 30 V DCExternal
Converter
0 V Source
D/A
Power
ADxI
Converter
0V
100 Ω
Voltage
A/D
Converter
+Transmitter
Internal Module
Circuitry
0V
200 Ω
CH
Load 250 Ω
External
Standard
KOYO
ELECTRONICS
INDUSTRIES
CO., LTD.
DAxI
Power Source
Internal Module Circuitry
+
18 to 30 V DC
External
ADxI
D/A
Power Source
Converter
0V
100 Ω
Voltage
A/D
Converter
Transmitter
0V
200 Ω
+
External
Ambient Temperature (˚C)
+
-
GENERAL CATALOG 2016
Input
ENCODER
24 V
DC
COUNTER
Common
INFORMATION
高速入力
Internal M
Input
Common
Subject Matter
24 V
DC
KOSTAC
Safety
AZ-C1
Common
標準入力
SJ
DL05/06
DL205
24 V DC
Internal M
240 V AC
Output
L
D4
D3
Common
Programmer
リレー出力
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Voltage
Transmitter
+
External
Power Source
電圧入力選択
Features
Specifications
Voltage
Dimensions
Transmitter
+
CPU
External
Specifications
Power Source
電流入力選択
Power Supply
Module
Input/Output
Module
CH Load 2 kΩ Internal Module
Minimum
DAxV
A/D
Converter
0V
Internal
Module
200 Circuitry
Ω
ADxV
+
Voltage
A/D
Module Circuitry
Load 2 kΩ Internal
CH Load 2 kΩ Internal Module CircuitryCHTransmitter
Converter
External
0V
150 kΩ
Minimum
DAxV Source
Minimum
Power
DAxV
Internal Module Circuitry
D/A
D/A
+
ADxI
Converter
Converter 0 VExternal
0V
Internal Module
Circuitry
Voltage
A/D
ADxV
Converter
Transmitter Power Source
0
V
200
Ω
CH Load 2 kΩ Internal Module Circuitry
Voltage
A/D
Input・Output Minimum
DAxV
Converter
Transmitter +
0V
150 kΩ
D/A
Converter
0 VExternal
Internal Module Circuitry
+
Power
Source
External
ADxV
Power Source
Module Circuitry
CH Voltage
Load 2 kΩ Internal
A/D
Minimum
Converter
Transmitter DAxV
0V
150 kΩ
External
0
30
+
Internal Module
240Circuitry
V AC
Analog voltage input selection
Power
Source
Output
ADxI
Common
Input・Output
ディレーティング
Voltage
A/D
A/D
Converter
Transmitter
0V
Converter
150 kΩ
150 kΩ
24 V
DC
Internal
Module Circuitry
Circuitry
24 V DC+ Internal -Module
240 V AC External
ADxV
Common
Output
Voltage LPower Source
A/D
Converter
Transmitter
0V
150 kΩ
+
Internal Module Circuitry
Internal Module Circuitry
24 V DC External
ADxV
240 V AC
PowerCommon
Source
Output
Voltage
A/D
L
Converter
Transmitter
0V
150 kΩ
Power Source
10
20 55 60
30
40
50 55 60
40
50
18 to 30 V DC
Input・Output
Ambient
Temperature
(˚C)
Ambient
Temperature
(˚C)
4
0
8
The specifications and prices0described
valid when
was issued.
10 in this
20 catalog
30 were 40
50 the
55 catalog
60
2
For the latest information,6 contact our sales
persons
or see our website.
Ambient
Temperature
(˚C)
0
0V
Relay Output
Transmitter
Transmitter 04 to
to 520V mA
Number of Input/Output Points
250
AD2I
2
AD1V
Loop supply
voltage
L
ACOM
3
AD1I
18 V DC: Up to 600 Ω
2 kΩ or more (Output
DA1V
Load Impedance
Loop supply voltage
current 2.5 mA orAD2V
less)
24 V DC: Up to 900 Ω
DA1I
AD1V
AD2I
Loop supply voltage
DA2V
AD1I
ACOM 30 V DC: Up to 1,200 Ω
DA2I
DA1V
Gain Error
±0.8% or less AD2V
±1% or less − +
AD2I
Offset Error
±5 mV or less DA1I
±0.1 mATransmitter
or less P/S
DA2V
Temperature Accuracy
±100 ppm/˚C orACOM
lower
±100 ppm/˚C or lower
DA1V
DA2I
−
+
DA1I
Relay life (ON → OFF 1cycle)
Transmitter P/S
DA2V Life
Load Conditions
DA2I
30 V DC,
−
+
300,000 cycles or more
1 A Resistance load
Transmitter P/S
HMI
SENSOR
Wiring Diagram
Items
Number of Outputs Points
Number of Occupied Outputs
Common
Rated Output Voltage C0
0
Operating Voltage
Output Type
1
AC Frequency
2
Maximum Output Current
3
Maximum Inrush Current
C1
Minimum Load Current 0
OFF→ON
Response
1
Time
ON→OFF
2
Fuse
3
PLC
0V
電圧出力選択
Intern
CH Load 250 Ω
Standard
DAxI
0V
+
External
Power Source
18 to 30 V DC
電流出力選択
65
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
CPU Specifications
■Sound Type《DC Input 5 Points, DC Output 5 Points》
SJ-30DD1-D
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
General Specifications
SJ
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Items
Supply Voltage
Supply Voltage Variation Range
Power Consumption
Power Source Inrush Current
Allowable Instantaneous Power Failure Time
Operating Ambient Temperature
Performance Specifications
Specifications
24 V DC
20 to 28 V DC
Not more than 5 W (When the communication port is not fed)
30 A or less (1 ms or less)
Up to 10 ms
0˚C to 55˚C IEC60068-2-14 (Temperature change test)
ｰ20˚C to 70˚C
Storage Ambient
IEC 60068-2-2 (Test Bb high temperature low humidity)
IEC 60068-2-1 (Test Ab low temperature)
Temperature
IEC 60068-2-14 (Test Na temperature change)
Use / Storage Ambient Humidity 30% to 95% (No condensation)
Surrounding Atmosphere in Place of Use No corrosive gases Environmental pollution level 2 (UL 840)
Terminator I/O
Vibration Resistance
Compliant with MIL STD 810C, Method 514.2, IEC600682-6, JIS C60068-2-6, and sine wave oscillation test method
Process Control
Impact Resistance
Compliant with MIL STD 810C, Method 516.2,
IEC60068-2-27 and JIS C60068-2-27
ZIP LINK
Noise Resistance
Radiation
Conformance Standard
Other
Compliant with NEMA ICS3-304, Impulse 1,000 V 1 μs pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI), EN61000-4-4 (FTB),
EN61000-4-5 (Surge), EN61000-4-8 (Magnetic fields), RFI: 150,
450 MHz (5W/15 cm), EN61000-4-6 (Conducted interference)
EN55011: 1998 Class A
UL508, UL60079-15 Zone 2, CE (EN61131-2)
Compliant with RoHS
Sound Specifications
Features
Items
Audio Output Form
Specifications
Nominal impedance 8 Ω
External Connection Speaker Maximum permissible
input 1 W or more
Dimensions
CPU
Specifications
Audio Output Terminal
Power Supply
Module
Input/Output
Module
Remarks
Monaural
φ3.5 mini-pin jack
SP+: Speaker output +
SP-: Speaker output -
Volume Control Form
Volume for sound
adjustment + Program
control system (4-stage
volume control)
Sound can be adjusted from a
volume on the front face of the
main body. The program
control system can be adjusted
from the PLC program.
Power Amplifier
D-class amplifier:
TPA2001D1 equivalent
The low-power-consumption mode
is set when no sound is produced.
2-bit ADPCM2 system
4-bit ADPCM system
(Recommended)
Suitable for normal sound
playback
Sound Synthesis System
8-bit non linear PCM system Suitable for playback of
8-bit straight PCM system
sound effects including
16-bit straight PCM system high frequency component
Maximum Reproduction
Time
Approx. 2 hours
Number of Sound Comment
Registrations
128 comments
Sound Rewrite System
66
Specifications
Balance Output
Automatic transfer from
external USB memory
(USB A type connector)
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
The playback time changes
according to sound synthesis
system and sampling frequency.
The sound data in the external USB
memory connected to the
dedicated USB port is automatically
transferred to the internal sound
data storage memory.
Items
Control System
Language System
Specifications
Stored program: Cyclic arithmetic processing system
Simultaneous use of relay symbol type and stage type
Number of Instructions
Sequence instructions: 54, program execution control
instructions: 20, data processing instructions: 82,
IBox instructions: 22
Number of Other Instructions 4
Processing Speed
Sequence instructions: 0.37 μs ~ Data processing instructions:2.96 μs ~
Program Memory Capacity
(Word)
Program 7.5 K + System parameter 0.5 K
Input Relay (I)
Output Relay (Q)
Internal Relay
Stage
Timer
Counter (C)
Special Relay (SP)
Timer Elapsed Value Register
Timer / Counter Elapsed Value
256 points (I 0 to 377)
256 points (Q 0 to 377)
2,048 points (M 0 to 3,777)
1,024 points (S 0 to 1,777)
256 points (T 0 to 377)
128 points (C 0 to 177)
256 points (SP 0 to 377)
256 word (R 0 to 377)
128 word (R 1,000 to 1177)
Data Register
7,488 word (R 400 to 677, R 1,200 to 7,377, R
10,000 to 17,777)
Special Register
Accumulator
Data Stack
320 word (R 700 to 777, R 7,400 to 7,777)
32-bit x 1
32-bit x 8 stack
Calendar, Clock
Stored data: Year, month, day, day of week, hour,
minute, second (Backup battery: D2-BAT-1)
Password
Input/Output Allocation
PID Function
Operation Mode
BCD8 digit 2 level (Usual password, restricted password)
Free location (Only for automatic allocation)
16-loops
RUN /STOP /TERM Power Failure Holding
Can retain the bit areas (M, S, T, C), some counter
elapsed value registers, data registers and special
registers during power failures.
Diagnosis Function
(Hardware)
Watchdog timer, cell voltage fall
Diagnosis Function
(Software)
- I/O arrangement check - Program memory check
- Calculation monitoring timer - Communication error
(Programmer port, general-purpose communication port)
Installation
Conforming DIN Rail
DIN rail or 2 screws
TH35Fe /TH35Al
Communication Function:
Port 1
Transmission method: RS-232C compatible (Non-isolated)
Transmission speed: 9,600 bps (Fixed) Connection:
6-pin modular (Female) jack Protocol: K sequence (S)
Communication Function:
Port 2
Transmission method: RS-232C compatible (Non-isolated)
Transmission speed: 300, 600, 1,200, 2,400, 4,800,
9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to
38,400 bps for non-procedures) Connection: 6-pin
modular (Female) jack Protocol: DirectNET (M/S),
MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Communication Function:
Port 3
Transmission method: RS-485 compatible (Non-isolated)
Transmission speed: 300, 600, 1,200, 2,400, 4,800,
9,600, 19,200, 38,400, 57,600, 115,200 bps (Up to
38,400 bps for non-procedures) Connection:
Terminal block 3 pins Protocol: DirectNET (M/S),
MODBUS (M/S), Non-procedure (M/S), K sequence (S)
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
CPU Specifications
Input Specifications
Items
Number of Input Points
Rated Input Voltage
Rated Input Current
Input Voltage Range
Maximum Input Current
Input Impedance
ON Voltage Level
OFF Voltage Level
Minimum ON-state Current
Output
Minimum
OFF-state Current
OFF→ON
Response Time
I/O No. Signal Name
ON→OFF Response Time
1
Status Display
V
2
Common
Q0
Q0
Fuse
3
Q1
Q1
4
2 to 10 ms
Signal Name I/O No.
3 to 10 ms
I0-1
11
I0
No input state
display
I0-2
12 have independent
All points
commons.
I1-1
None
13
I1
Q2
Q3
Q3
6
Items
Output
Q4
Number
ofQ4
Outputs Points 7
I/O No.
Signal
Name Range 8
Output
Voltage
C
1
Maximum
V Load Current
2
9
10
I2-1
15
5
12 20
I0-1 I4-1
I0
I4
Q4
7
17
I3-1
I3
I3-2
9
19
Signal Connector
Name Plug: 10120-3000PE
Contents(3M) Compatible
10
SP+
Speaker
output + 20
SPSpeaker output -
I4-1
Q2
Q3
Q3
13
3
4
15
5
Q4
24 V
DC
C 12
24 V
DC
24 V
DC
16
19
10
24 V
DC
I1
I2
24 V
DC
I3-1
20
I4-1
I3
I4
I4-2
SJ
(3M) Compatible
20 I4-2
D3
20 to 28
Programmer
Optical Isolation
DirectSOFT
DC入力
24 V
12 I0-2
24 V DC
DC
16 I2-2
13 I1-1
17 I3-1
Terminator I/O
24 V
14 I1-2
24 V DC
DC
18 I3-2
15 I2-1
19 I4-1
Optical Isolation
Speaker Output
Internal
24 V Module Circuitry
Speaker
8 Ω 1 W or more
16 I2-2
Internal Module Circuitry
20 I4-2
1720I3-1
to 28 V DC
1, 2 V
Process Control
ZIP LINK
φ3.5 Mini-pin Plug
(Monaural) Optical Isolation
SP+
L
3 Q0
Optical Isolation
SP20 I4-2
L
Speaker
8 Ω 1 W or more
L
DC出力 5 to 24 V DC
4 Q1
5 Q2
Features
Standard DC output (Q0 to Q4)
Internal Module Circuitry
20 to 28 V DC
6 Q3
1, 2L V
Specifications
Optical Isolation
3 Q0
7 Q4
L
CPU
Optical Isolation
Speaker
8 Ω 1 W or more
L
φ3.5 Mini-pin Plug
(Monaural)
Speaker
8 Ω 1 W or more
5 to 24 V DC
φ3.5 Mini-pin Plug
(Monaural)
5L Q23 Q0
L
6L Q34 Q1
L
7L Q45 Q2
8, 9, 10 C
L
SP-
L
5 to 24 V DC
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
Dimensions
DC出力
Specifications
5 to 24 V DC
Module Circuitry
9, 10 Internal
C
20 to 28 V8,
4DCQ1
L
1, 2 V
SP+
24 V
DC
DC入力
Optical Isolation
Internal Module Circuitry
L
Speaker Output
Internal SPModule Circuitry
18 I3-2
D4
Optical Isolation
14 I1-2
11 I0-1
15 I2-1
SP-
SP+
DC
DL205
12 I0-2
24 V
DC
φ3.5 Mini-pin Plug
(Monaural)
Speaker Output
Internal Module Circuitry
16 I2-2
17 I3-1
AZ-C1
I1-1 input (I0 to I4)
24 V 13DC
Standard
DC
20 I4-2
18 I3-2
19 I4-1
14 I1-2
15 I2-1
DL05/06
16 I2-2
Connector
Plug: 10120-3000PE
17 I3-1
Internal Module Circuitry
24 V 11 I0-1
DC
18 I3-2
24 V DC
DC
12 I0-2
13 I1-1
19 I4-1
KOSTAC Safety
DC入力
14 I1-2
15 I2-1
19 I4-1
Equivalent
Circuit
24 V
24 V
DC
Intern
11 I0-1
Common
Subject
Matter
24 V
I3-2
18
9
I0-2
13 I1-1
I2-1
Optical Isolation
8
24 V
DC
INFORMATION
I2-2
17
7
11 I0-1
I1-1
COUNTER
I0
I1-2
14
6
I0-1
I0-2
12
Internal Module Circuitry
I4
I4-2
Speaker Output
Internal Module Circuitry
Connector Plug: 10120-3000PE (3M) Compatible
SP+
Q2
24 V
DC
8
18
3.5φ minijack
connector
Sound terminal C
Q1
DC
I0-2 I4-2
Minimum
0.2 mA
OutputLoad Current
Input
Q0
Q0
I1-1
13
3
I1
Maximum Leakage Current 0.1 mA (30 V DC)
I/O
No.
Signal
Name
Signal
Name
I/O No.
Q1
Q1
4
ON-time
Voltage Drop
0.5 14
V DC (0.1 A) I1-2
Q2
Q2
I0-1
5 1
Maximum Inrush Current
150 mA15(1011ms) I2-1
I2 I0
VConnector Plug: 10120-3000PE (3M) Compatible
OFF→ON
0.5 16
ms 12
or less I2-2 I0-2
Q3
Q3 Response
2
6 Time
ON→OFF
Response Time
0.5 ms 17
or less
Q0 Q4 Q0
Q4
I3-1 I1-1
13
7 3
I3 I1
Status Display
No output state display
Q1
Q1
I1-2
I3-2
8 4
18 14
Common
5 points 1 common
Q2 C Q2
I4-1 I2-1
19 15
I4 I2
External Power Supply9 5
20 to 28 V DC (60 mA)
Q3
Q3
I4-2 I2-2
6
10
16
20
Fuse
None
Q4
Q0
Q1
I2-2
0.1 A/point
11 19
0.5 A/common
11
1
Q0
I2
16
Specifications
Input
I3-1
17
5 points (Sink)
I3
I3-2 I/O No.
5 to 24 18
V DC Signal Name
Signal Name I/O No.
2
Q4
ENCODER
Input
I/O No. Signal Name
I1-2
14
Output Specifications (Standard output)
Q2
Output
V
HMI
SENSOR
Wiring Diagram
Specifications
5 points (Sink/source)
24 V DC
4 mA
21.6 to 26.4 V DC
5.0 mA (26.4 V DC)
6.8 kΩ (24 V DC)
19 V DC or higher
7 V DC or higher
3.5 mA
Input
1.5 mA
PLC
Power Supply
Module
Input/Output
Module
DC出力
6 Q3
7 Q4
8, 9, 10 C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
67
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
Power Supply Module
■Power Supply Module
J-00AC
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
Specifications
SJ
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Terminator I/O
Items
Model Number
Supply Power Source Rating
Allowable Voltage Range
AC Frequency
Maximum Apparent Power
Inrush Current
Output Current
Weight
Dimensions
Installation
Conforming Cable Size
Conforming Crimp Terminal
Allowable Tightening Torque
Conforming DIN Rail
Specifications
J-00AC
100 V to 240 V AC 50/60 Hz
85 to 264 V AC
47 to 63 Hz
15 VA
20 A (Cold start)
24 V DC 0.5 A
150 g
35 W x 85 H x 75 D (Excluding the terminal block)
DIN rail or 2 screws
0.25 to 1.65 mm 2 (AWG18 to 26)
1.25
0.6 Nm
TH35Fe/TH35Al
Process Control
ZIP LINK
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
68
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
Power Supply Module
PLC
HMI
SENSOR
■Power Supply Module
J-01AC
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
Specifications
Items
Model Number
Supply Power Source Rating
Allowable Voltage Range
AC Frequency
Maximum Apparent Power
Inrush Current
Output Current
Weight
Dimensions
Installation
Conforming Cable Size
Conforming Crimp Terminal
Allowable Tightening Torque
Conforming DIN Rail
SJ
Specifications
DL05/06
J-01AC
100 V to 240 V AC 50/60 Hz
85 to 264 V AC
47 to 63 Hz
37 VA
20 A (Cold start)
24 V DC 1.3 A
170 g
35 W x 85 H x 75 D (Excluding the terminal block)
DIN rail or 2 screws
0.25 to 1.65 mm 2 (AWG18 to 26)
1.25
0.6 Nm
TH35Fe/TH35Al
DL205
D4
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
69
Programmable Logic Controller
SJ Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《DC 8 Points》
J-08ND3
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
C0
0
−
+
12 to 24 V DC
1
+
−
2
Input Specifications
3
Items
SpecificationsC1
4
Number of Input Points
8 points (Sink/source)
−
+
12 to of
24 Occupied
V DC
Number
8 points
5
+ Inputs
−
Common
2 (4 points/common)
6
Input Voltage Range
12/24 V DC
7
Operating Voltage
10.8 to 26.4 NC
V DC
Peak Voltage
26.4 V DC
Input Current
5 mA (24 V DC)
Maximum Input Current
7 mA (26.4 V DC)
SJ
DL05/06
DL205
D4
D3
Programmer
Required Current on the
Main Power Supply Side
DirectSOFT
On-state Voltage / Current
Off-state Voltage / Current
Input Impedance
OFF→ON
Response
Time
ON→OFF
Terminator I/O
Process Control
Features
Specifications
0
NC
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
Dimensions
Optical Isolation
12 to 24 V
Wiring Diagram
DC
Common
12 to 24 V DC
12 to 24 V DC
−
+
C0
0
1
2
3
C1
4
5
6
7
+
−
−
+
+
−
Up to 30 mA
8.0 V DC/1.4 mA
3.0 V DC/0.5 mA
4.7 kΩ (24 V DC)
Up to 3.5 ms Standard 2.0 ms
Up to 4.0 ms Standard 2.5 ms
C0
ディレーティング
0
Derating
Chart +
−
12 to 24 V DC
1
+
−
2
8
3
6
C1
4
+
4 −
12 to 24 V DC
5
+
−
6
2
7
Number of Input Points
ZIP LINK
Input
CPU
Specifications
Power Supply
Module
NC
Equivalent Circuit
Internal Module Circuitry
Input
Optical Isolation
12 to 24 V
DC
Common
ディレーティング
Number of Input Points
KOSTAC Safety
AZ-C1
Internal Module Circuitry
8
6
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
Input/Output
Module
Number of Input Points
ディレーティング
8
6
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
70
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
12 to 24 V
DC
Programmable Logic Controller
SJ Series
Input/Output Module
PLC
HMI
SENSOR
■Input Module《DC 8 Points》
J-08ND3-1
ENCODER
COUNTER
INFORMATION
C0
0
−
+
3.3 to 5 V DC
1
+
−
2
Input Specifications
3
Items
SpecificationsC1
Number of Input Points
8 points (Sink/source)
4
− Inputs
+
Number
of Occupied
8 points
3.3 to 5 V DC
5
+
−
Common
2 (4 points/common)
6
Input Voltage Range
3.3/5.0 V DC
7
Operating Voltage
2.8 to 5.5 V DC
NC
Peak Voltage
5.5 V DC
Input Current
5 mA (5 V DC)
Maximum Input Current
7.5 mA (5.5 V DC)
Required Current on the
Main Power Supply Side
Optical Isolation
Wiring Diagram
3.3 to 5 V
C0
0
1
2
3
C1
4
5
6
7
Common
3.3 to 5 V DC
3.3 to 5 V DC
−
+
+
−
−
+
+
−
20
30
40
50 55 60
Ambient Temperature (˚C)
NC
DL05/06
D4
3.3 to 5 V
DC
C
D3
Programmer
DirectSOFT
Process Control
Equivalent Circuit
Internal Module Circuitry
ZIP LINK
Input
Optical Isolation
3.3 to 5 V
DC
Common
ディレーティング
8
Features
6
Specifications
4
Dimensions
2
CPU
Specifications
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
Power Supply
Module
Input/Output
Module
Number of Input Points
ディレーティング
8
6
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
In
In
DL205
Terminator I/O
Number of Input Points
Number of Input Points
NC
0
10
SJ
DC
Up to 30 mA
2.2 V AC/1.4 mA
0.8 V AC/0.2 mA
680 Ω
Up to 3.0 ms Standard 1.6 ms
Up to 4.0 ms Standard 2.3 ms
C0
ディレーティング
0
−
Chart +−
3.3 toDerating
5 V DC
1
+
2
8
3
C1
6
4
−
+
3.3 to 5 V DC4
5
+
−
6
2
7
KOSTAC Safety
AZ-C1
Input
On-state Voltage / Current
Off-state Voltage / Current
Input Impedance
OFF→ON
Response
Time
ON→OFF
0
Common
Subject Matter
Internal Module Circuitry
71
Programmable Logic Controller
SJ Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《DC 16 Points》
J-16ND3
ENCODER
COUNTER
INFORMATION
C0
0
−
+
1
24 V DC
+
−
2
3
C1
4
−
+
5
24 V DC
+
−
6
Input Specifications
7
Items
Specifications
C2
Number of Input Points
16 points (Sink/source)
10
Number of Occupied
Inputs 16 points
−
+
11
24
V
DC
Common
4 (4−points/common)
+
12
Input Voltage Range
24 V DC
13
Operating Voltage
21.6 to 26.4 V DC
C3
Peak Voltage
26.4 V DC
14
Input Current
4 mA (24 V DC)
−
+
Maximum24Input
5 mA
(26.4 V DC)
15
V DCCurrent
+
−
16
Required Current on the
Up to 40 mA
Main Power Supply Side
17
On-state Voltage / Current
19.0 V DC/3.5 mA
Off-state Voltage / Current
7.0 V DC/0.5 mA
Input Impedance
6.8 kΩ (24 V DC)
OFF→ON
Up to 10 ms Standard 2 ms
Response
Time
ON→OFF
Up to 10 ms Standard 3 ms
Common
Subject Matter
KOSTAC Safety
AZ-C1
SJ
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
Internal Module Circuitry
Input
Optical Isolation
24 V DC
Common
Wiring Diagram
24 V DC
Specifications
−
24 V DC +
+
−
−
24 V DC +
+
−
8
4
0
−
24 V DC
+
Dimensions
CPU
Specifications
Power Supply
Module
+
−
12
24 V DC
−
+
Input/Output
Module
−
24 V DC +
−
24 V DC +
0
C0
0
+
10 − 20
30
40
501 55 60
Ambient Temperature (˚C) 2
3
C1
4
+
5
−
6
7
C2
10
+
11
−
12
13
C3
14
+
15
−
16
17
Equivalent Circuit
Internal Module Circuitry
Input
ディレーティング
Number of Input Points
Number of Input Points
Features
16
+
−
−
+
24 V DC
ディレーティング
Derating
Chart
ZIP LINK
−
+
C0
0
1
2
3
C1
4
5
6
7
C2
10
11
12
13
C3
14
15
16
17
16
Optical Isolation
24 V DC
Common
12
8
4
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
72
nput Points
ディレーティング
16
12
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
24 V DC
Programmable Logic Controller
SJ Series
Input/Output Module
PLC
HMI
SENSOR
■Input Module《AC 8 Points》
J-08NA
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
C0
Input Specifications
0
Items
Specifications 1
100 to 120 V AC
Number of Input Points
8 points (AC)
2
Number of Occupied Inputs 8 points
3
Common
2 (4 points/common)
C1
Input Voltage Range
100 to 120 V AC
4
Operating Voltage
80 to 144 V AC
100 to 120 V AC
5
Peak Voltage
144 V AC
6
AC Frequency
47 to 63 Hz
7
8.5 mA (100 V AC/50 Hz)
Input Current
10 mA (100 VNC
AC/60 Hz)
Maximum Input Current
16 mA (144 V AC)
Required Current on the
Main Power Supply Side
Up to 30 mA
On-state Voltage / Current
Off-state Voltage / Current
70 V AC/5 mA
20 V AC/2 mA
Input Impedance
15 kΩ (50 Hz)
12 kΩ (60 Hz)
Number of Input Points
8
100 to 120 V AC
6
NC
2
0
10
20
30
100 to 120 V AC
100 to 120 V AC
Common
100 to 120 V AC
C0
0
1
2
3
C1
4
5
6
7
Internal Module Circuit
DL05/06
Input
DL205
100 to 120 V AC
Equivalent Circuit
C0
0
1
2
3
C1
4
5
6
7
Derating Chart
0
Optical Isolation
D4
Common
D3
Programmer
DirectSOFT
Terminator I/O
ディレーティング
4
SJ
Input
NC
Up to 40 ms
Up to 40 ms
ON→OFF
100
to 120 V AC
Wiring Diagram
40
50 55 60
Ambient Temperature (˚C)
Process Control
Internal Module Circuitry
ZIP LINK
Input
Optical Isolation
100 to 120 V AC
Common
ディレーティング
Number of Input Points
OFF→ON
Response
Time
Internal Module Circuitry
8
Features
6
Specifications
4
Dimensions
2
CPU
Specifications
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
Power Supply
Module
Input/Output
Module
Number of Input Points
ディレーティング
8
6
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
73
Programmable Logic Controller
SJ Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《DC 8 Points》
J-08TD1
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
Wiring Diagram
24 V DC Internal Module Circuitry
Output Specifications
3.3 toItems
27 V DC
DL05/06
Number of Outputs Points
DL205
Number of Occupied
Outputs
−
+
Common
Output Voltage Range
3.3 to 27 V DC
−
Operating Voltage
+
−
Peak Voltage
+
Output Type 24 V DC
ON-time Voltage Drop
Maximum Output Current
Maximum Leakage Current
Maximum Inrush Current
Minimum Load Current
External Power Supply
D4
D3
Programmer
DirectSOFT
Terminator I/O
C0
Specifications 0
L
8 points (Sink)
1
L
2
8 points
L
3
2 (4 points/common)
C1
3.3 to 27 V DC
L
4
2.8 to 30 V DC
L
5
30 V DC L
6
NMOS FET L
7
1.5 V DC (0.3 A)
+V
0.3 A (Points)/1.2 A (Common)
0.1 mA (30 V DC)
1 A (10 ms)
0.5 mA
24 V DC (±10%) Up to 15 mA
Process Control
Required Current on the
Main Power Supply Side
ZIP LINK
OFF→ON
Response
Time3.3 to 27 V DCON→OFF
L
Number of Outputs Points
Specifications
Dimensions
CPU
Specifications
L
8
6
C0
0
1
2
3
C1
4
5
6
7
+V
L
Derating Chart
3.3 to 27 V DC
−
+
−
+
24 V DC
L
L
L
4
2
0
0
Power Supply
Module
3.3 to 27 V DC
10
20
30
L
Output
L
−
+
L
Common
L
L
L
3.3 to 27 V DC
−
+
−
+
24 V DC
L
L
L
C0
0
1
2
3
C1
4
5
6
7
+V
Equivalent Circuit
Up to 0.5 ms
Up to 0.5L ms
None L
ディレーティング
Optical Isolation
3.3 to 27 V DC
Up to 50 mA
−
+
Fuse
Features
+V
L
40
50 55 60
Ambient Temperature (˚C)
24 V DC Internal Module Circuitry
+V
Optical Isolation
3.3 to 27 V DC
Output
L
Common
ディレーティング
Number of Outputs Points
SJ
8
6
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
Input/Output
Module
Number of Outputs Points
ディレーティング
8
6
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
74
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
24 V DC Intern
+V
3.3 to 27 V DC
L
Outpu
Comm
Programmable Logic Controller
SJ Series
Input/Output Module
PLC
HMI
SENSOR
■Output Module《DC 8 Points》
J-08TD2
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
V0
Output Specifications
L
0
Items
Specifications 1
L
12 to 24 V DC
Number of Outputs Points
8 points (Source)
L
2
Number of Occupied
L
3
8 points
Outputs
V1
Common
2 (4 points/common)
L
4
Output Voltage Range
12/24 V DC
L
5
Operating
9.6 to 30 V DC
12 Voltage
to 24 V DC
L
6
Peak Voltage
30 V DC
L
7
Output Type
PMOS FET
C
ON-time Voltage Drop
1.5 V DC (0.3 A)
0.3 A (Points)/1.2 A (Common)
0.1 mA (30 V DC)
1 A (10 ms)
0.5 mA
Required Current on the
Main Power Supply Side
Up to 50 mA
OFF→ON
ON→OFF
Response
Time
Up to 1 ms
Up to 1 ms
L
None
Fuse
V0
0
1
2
3
V1
4
5
6
7
C
L
12 to 24 V DC
ディレーティング
Derating Chart
L
Number of Outputs Points
L
L
8
L
12 to 24 V DC
6
L
L
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
Internal Module Circuitry
SJ
+V
Optical Isolation
Output
L
V0
0
1
2
3
V1
4
5
6
7
C
L
L
Common
12 to 24 V DC
L
L
L
L
12 to 24 V DC
L
L
DL05/06
Internal Modul
12 to 24 V DC
+V
DL205
L
D4
Output
Common
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
Equivalent Circuit
Internal Module Circuitry
ZIP LINK
12 to 24 V DC
+V
Optical Isolation
Output
L
Common
ディレーティング
Number of Outputs Points
Maximum Output Current
Maximum Leakage Current
Maximum Inrush Current
Minimum Load Current
Wiring
Diagram
12 to 24 V DC
8
Features
6
Specifications
4
Dimensions
2
CPU
Specifications
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
Power Supply
Module
Input/Output
Module
Number of Outputs Points
ディレーティング
8
6
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
75
Programmable Logic Controller
SJ Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《DC 16 Points》
J-16TD1
ENCODER
COUNTER
INFORMATION
C0
0
L
1
24 V DC
−
L
2
+
5 to 27 V DC
L
3
Output
Specifications
−
V0
+
Items
Specifications
L
4
Number of Outputs Points
16 points (Sink)
L
5
Number of Occupied
16 points
L
6
Outputs
L
7
Common
2 (8 points/common)
C1
Output Voltage Range
5 to 27 V DC
10
Operating Voltage
4 to 30 V DC L
L
11
Peak Voltage
24 V DC 30 V DC
−
L
Output Type
NPN+ open collector
12
to 27 V DC
ON-time5Voltage
Drop
0.5 V DC (0.1LA)
13
−
Maximum Output Current+
0.1 A (Points)/0.8 A (Common) V1
Maximum Leakage Current 0.1 mA (30 V LDC)
14
Maximum Inrush Current
150 mA (10 ms)
L
15
Minimum Load Current
0.2 mA
L
16
External Power Supply
24 V DC (±10%) Up
to 100 mA
L
17
Required Current on the
Up to 80 mA
Main Power Supply Side
Common
Subject Matter
24 V DC Internal Module Circuitry
+V
L
KOSTAC Safety
AZ-C1
SJ
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Response
Time
OFF→ON
ON→OFF
Fuse
Optical Isolation
5 to 27 V DC
L
Output
Wiring DiagramCommon
24 V DC
L
−
+
L
5 to 27 V DC
L
−
+
L
L
L
L
L
24 V DC
L
−
+
L
5 to 27 V DC
L
−
+
Up to 0.5 ms
Up to 0.5 ms
None
L
L
L
L
Specifications
Dimensions
16
12
8
4
5 to 27 V DC
CPU
Specifications
0
Power Supply
Module
Input/Output
Module
5 to 27 V DC
C0
L
0
L
1
24 V DC
−
L
2
+
L
3
−
V0
+
L 30
0
10
20
40
504 55 60
Ambient LTemperature (˚C) 5
L
6
L
7
C1
L
10
L
11
24 V DC
−
L
12
+
L
13
−
V1
+
L
14
L
15
L
16
L
17
Equivalent Circuit
24 V DC Internal Module Circuitry
+V
ディレーティング
Output
L
Optical Isolation
5 to 27 V DC
Number of Outputs Points
Number of Outputs Points
ディレーティング
Derating
Chart
Features
C0
0
1
2
3
V0
4
5
6
7
C1
10
11
12
13
V1
14
15
16
17
L
16
Common
12
8
4
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
76
tputs Points
ディレーティング
16
12
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
24 V DC
5 to 27 V DC
L
Programmable Logic Controller
SJ Series
Input/Output Module
PLC
HMI
SENSOR
■Output Module《DC 16 Points》
J-16TD2
ENCODER
COUNTER
INFORMATION
V0
0
L
1
12 to 24 V DC
+
L
2
−
L
3
Output Specifications
C0
L
Items
Specifications 4
L
5
Number of Outputs Points
16 points (Source)
L
6
Number of Occupied
16 points
Outputs
L
7
Common
2 (8 points/common)
V1
Output Voltage Range
12/24 V DC L
10
Operating Voltage
9.6 to 30 V DC
L
11
12 to 24 V DC
Peak Voltage
30 V+ DC
L
12
−
Output Type
PNP open collector
L
13
ON-time Voltage Drop
0.6 V DC (0.1 A)
C1
Maximum Output Current
0.1 A (Points)/0.8 A (Common)
L
14
Maximum Leakage Current 0.1 mA (30 V DC)
L
15
Maximum Inrush Current
150 mA (10 ms)
L
16
Minimum Load Current
0.2 mA
L
17
Required Current on the
Up to 80 mA
Main Power Supply Side
12 to 24 V DC
L
Response
Time
OFF→ON
ON→OFF
Fuse
+V
Optical Isolation
L
SJ
V0
0
1
2
3
C0
4
5
6
7
V1
10
11
12
13
C1
14
15
16
17
L
12 to 24 V DC
L
+
−
L
L
L
L
L
L
L
12 to 24 V DC
L
+
−
L
L
Up to 0.5 ms
Up to 0.5 ms
None
Common
Subject Matter
KOSTAC Safety
AZ-C1
Output
Common
Wiring Diagram
L
L
L
ディレーティング
Derating
Chart
L
Internal Module Circuit
DL05/06
12 to 24 V DC
+V
DL205
L
D4
Output
Common
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
16
Equivalent Circuit
12
V0
L
8
0
L
1
12 to 24 V DC
+
4
L
2
−
L
3
0
C0
0
10
20
30
40
50 55 60
L
4
Ambient Temperature (˚C)
L
5
L
6
L
7
V1
L
10
L
11
12 to 24 V DC
+
L
12
−
L
13
C1
L
14
L
15
L
16
L
17
12 to 24 V DC
L
16
Features
Internal Module Circuitry
+V
ディレーティング
Number of Outputs Points
Number of Outputs Points
Internal Module Circuitry
Optical Isolation
Output
Specifications
Dimensions
Common
12
CPU
Specifications
8
Power Supply
Module
4
Input/Output
Module
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
tputs Points
ディレーティング
16
12
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
77
Programmable Logic Controller
PLC
HMI
SENSOR
ENCODER
SJ Series
Input/Output Module
■Output Module《AC 8 Points》
J-08TA
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
Wiring Diagram
Output Specifications
SJ
17 to 240 V DC
SpecificationsC0
0
8 points (AC)L
L
1
Number of Occupied
8 points
L
Outputs
2
L
Common
2 (4 points/common)
3
Output Voltage Range 17 to 24017V DC
to 240 V AC
C1
Operating Voltage
13.5 to 288 LV AC
4
Peak Voltage
288 V AC L
5
Output Type
SSR
L
6
AC Frequency
47 to 63Hz L
7
1.5 V AC (0.1 NC
A or more)
ON-time Voltage Drop
3.0 V AC (Below 0.1 A)
Items
Number of Outputs Points
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Process Control
Maximum Output Current
Maximum Leakage Current
Maximum Inrush Current
Minimum Load Current
ZIP LINK
17 to 240 V DC
Required Current on the
Up to 80 mA
Main Power Supply Side
L
Terminator I/O
L
17 to 240 V DC
ディレーティング
Derating Chart
CPU
Specifications
8
L
L
6
C0
0
1
2
3
C1
4
5
6
7
Internal Module Circuitry
Optical Isolation
L
L
L
Common
17 to 240 V DC
L
L
L
L
17 to 240 V AC
L
Equivalent Circuit
NC
Internal Module Circuitry
Optical Isolation
Output
Common
0.2A/pt
6
0.3A/pt
4
2
0
Power Supply
Module
0
10
20
30
40
50 55 60
2
0
0
Ambient Temperature (˚C)
Input/Output
Module
0.3A/pt
4
10
20
30
40
50 55 60
Ambient Temperature (˚C)
* Every other point should be turned on.
* Every other point should be turned on.
Number of Outputs Points
ディレーティング
0.2A/pt
8
6
0.3A/pt
4
2
0
0
10
20
30
40
50 55 60
Ambient Temperature (˚C)
* Every other point should be turned on.
78
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
Latest catalog (free) is available online.
Output
Common
NC
Number of Outputs Points
Dimensions
L
Number of Outputs Points
Specifications
L
L
Output
L
C0
0
17 to 240 V AC
L
1
2
3
C1
ディレーティング
4
5
6 0.2A/pt
8
7
Up to 1 msL
Up to 1 msL + 1/2 cycle
None
Fuse
Features
17 to 240 V AC
0.3 A (Points)/1.2 A (Common)
4 mA (288 V AC)
10 A (10 ms)
10 mA
OFF→ON
ON→OFF
Response
Time
Internal Module Circuitry
17 to 240 V DC
Visit our website ▼
http://www.koyoele.co.jp/english/
Programmable Logic Controller
SJ Series
Input/Output Module
PLC
HMI
SENSOR
■Output Module《Relay 8 Points》
J-08TR
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
Wiring Diagram
Output Specifications
Items
Number of Outputs Points
Specifications
24 V DC
8 points
Number of Occupied
Outputs
240 V AC
8 points
L
L
Common
Rated Output Range
Operating Voltage
Output Type
Maximum Output Current
Maximum Leakage Current
Maximum Inrush Current
Minimum Load Current
2 (4 points/common)
24 V DC/240 V AC
Up to 30 V DC Up to 264 V AC
24Relay
V DC format A (SPST)
C0
(Points)/4 A (Common)
2401VAAC
L
0
0.1 mA (264 V AC)
L
1
3 A (10 ms)
L
2
5 mA (5 V DC)
L
3
Required Current on the
to 100 mA
24Up
V DC
C1
Main Power Supply Side
240 V AC
4
OFF→ON
Up to 15 ms L
Response
Time
5
ON→OFF
Up to 15 ms L
24 V DC
L
Fuse
None
C0 6
240 V AC
L
L
0 7
NC
L
1
Load Conditions
30 V DC,
1 A Resistance Load
L
24 V DC
300,000
240 V AC
30 V DC,
1 A Inductive Load
Life
L
cycles or more
L
50,000 Lcycles or more
L
250 V AC,
1 A Resistance Load
300,000L cycles or more
250 V AC,
1 A Inductive Load
NC
20,000 cycles or more
2
3
C1
4
5
6
7
ディレーティング
Number of Outputs Points
Derating Chart
8
L
24 V DC
240 V AC
L
24 V DC
240 V AC
L
L
Internal Module Circuitry
L
Output
L
C0
0
1
2
3
C1
4
5
6
7
Internal Module
Circuitry
DL05/06
24 V DC
240 V AC
L
Output
DL205
Common
D4
D3
Programmer
DirectSOFT
NC
Common
Terminator I/O
Process Control
Equivalent Circuit
Internal Module Circuitry
24 V DC
240 V AC
L
ZIP LINK
Output
Common
ディレーティング
Number of Outputs Points
Relay life (ON → OFF 1 cycle)
Number of Outputs Points
L
SJ
8
Features
6
Specifications
4
Dimensions
2
CPU
Specifications
0
0
6
10
20
30
Power Supply
Module
40 45 50 55 60
Ambient Temperature (�)
Input/Output
Module
4
* Every other point should be turned on.
2
ディレーティング
0
0
8
10
20
30
40 45 50 55 60
Ambient Temperature (�)
6
* Every other point should be turned on.
4
2
0
0
10
20
30
40 45 50 55 60
Ambient Temperature (�)
* Every other point should be turned on.
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
79
Programmable Logic Controller
SJ Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《Relay 4 Points》
J-04TRS
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
Output Specifications
SJ
DL05/06
Items
Number of Outputs Points
DL205
Number of Occupied
Outputs
Wiring Diagram
Specifications
4 points
24 V DC
8 points
Common
4 (1 point/common)
Rated Output Voltage
24 V DC/240 V AC
C0
Operating Voltage
UpDCto 30 V DC Up to 264 V AC
24 V
NC0
L
Output Type
240 Relay
V AC format C (SPDT)
NO0
L
AC Frequency
47 to 63 Hz
Maximum Output Current
7 A (Points)/7 A (Common)
Maximum Leakage Current 0.1 mA (264 V AC)
C1
Maximum Inrush Current
12 A
24 V DC
NC1
L
Minimum Load Current
100 mA (5 V DC)
240 V AC
NO1
L
Required Current on the
Up to 100 mA
Main Power Supply Side
D4
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
Response
Time
ZIP LINK
Fuse
OFF→ON
ON→OFF
Up to 15 ms
Up to 15 ms
24 V DC
None
240 V AC
L
Specifications
250 V AC,
24 V DC
4.9 A Resistance Load
Dimensions
250 V AC,
2.9 A Inductive Load
240 V AC
24 V DC
L
24 V DC
Number of Outputs Points
Input/Output
Module
L
240 V AC
8
L
C1
NC1
NO1
6
4
24 V DC
L
240 V AC
2
L
C2
NC2
NO2
Common
L
24 V DC
C2
NC2
NO2
L
240 V AC
L
24 V DC
L
C1
NC1
NO1
NO
L
C3
NC3
NO3
C0
90,000 cycles or more
NC0
L
NO0
L100,000 cycles or more
ディレーティング
Derating
Chart
Power Supply
Module
L
240 V AC
C3
NC3
NO3
L
L
Equivalent Circuit
100,000 cycles or more
240 V AC
CPU
Specifications
100,000 Lcycles or more
Internal Module Circuitry
L
ディレーティング24 V DC
240 V AC
Number of Outputs Points
Features
25 V DC,
7 A Resistance Load
Life
24 V DC
24 V DC
240 V AC
240 V AC
Load Conditions
24 V DC
240 V AC
NC
L
Relay life (ON → OFF 1cycle)
30 V DC,
7 A Resistance Load
L
L
5A/Pt.
7A/Pt.
NC
Common
8
NO
L
6
4
5A/Pt.
2
7A/Pt.
0
0
10
20
30
40 45 50 55 60
Ambient Temperature (˚C)
0
0
10
20
24 V DC
Ambient
240 V AC
30
40 45 50C355 60
Temperature
(˚C)NC3
L
L
NO3
utputs Points
ディレーティング
80
8
6
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
NC
Common
Internal Module Circuitry
C2
NC2
NO2
L
L
240 V AC
Internal Module Circuitry
C0
NC0
NO0
Latest catalog (free) is available online.
Visit our website ▼
http://www.koyoele.co.jp/english/
NO
Programmable Logic Controller
SJ Series
PLC
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
KOSTAC Safety
AZ-C1
SJ
DL05/06
DL205
D4
D3
Programmer
DirectSOFT
Terminator I/O
Process Control
ZIP LINK
Features
Specifications
Dimensions
CPU
Specifications
Power Supply
Module
Input/Output
Module
The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2016
81