CONSTRUCTION-MATH “POWER TOOLS” ™
ULTRA MEASURE MASTER
®
Professional Feet-Inch/Metric Calculator
With Over 400 Conversion Combinations
Designers • Engineers • Contractors/Builders • Excavation/Highway Contractors
Purchasing • Machinists • Importers/Exporters • Draftspersons • Architects
n Get Maximum
Conversion Versatility
and Accuracy
n Reduce Errors and
Prevent Rework
n Extensive Choice of
Measurement Units
and Conversions…
Linear, Area, Volume,
Weight, Weight to
Volume, Linear
Velocity, Flow Rates,
Pressure, Bending
Moment, Temperature
n Fast, Easy-to-Use,
Flexible…Conversions
require a minimum of
keystrokes. There are
no formulas to remember, no complicated
entry routines or
protocol to follow
The Ultra Measure Master is a
professional-grade Feet-Inch Metric
conversion calculator that provides
for more than 400 unit conversion
combinations. It quickly and easily
makes accurate conversions from
one measurement unit to another
from a selection of 60 built-in units.
It handles more conversions within
more measurement units than any
other available Imperial-Metric (SI)
conversion calculator.
60+ Imperial and Metric (SI) Units
Built-in for over 400 fast, reliable conversion
combinations on the job or in the office.
Linear Unit Conversions
Feet-Inch-Fractions, Decimal Feet, Decimal
Inches, Yards, Miles, Millimeters, Centimeters,
Meters and Kilometers.
Area Unit Conversions
Feet, Inches and Yards, Acres, Miles,
Millimeters, Centimeters, and Meters,
Hectares, Kilometers.
Volumetric Unit Conversions
Feet, Inches, Yards, Miles, Millimeters,
Centimeters, Meters, and Kilometers,
Gallons, Fluid Ounces, Liters, Milliliters,
Acre-Feet and Board-Feet.
Weight Unit Conversions
Pounds, Dry Ounces, Tons, Metric Tons,
Grams and Kilograms.
Weight to Volume Unit Conversions
Tons per Cubic Yard, Pounds per Cubic Yard
and Kilograms per Cubic Meter.
Linear Velocity Unit Conversions
Inch per Second, Feet per Second, Feet per
Minute, Miles per Hour, Meters per Second,
Meters per Minute, Millimeters per Second
and Kilometers per Hour.
Flow Rate Unit Conversions
Ounces per Second, Gallons per Minute,
Liters per Second, Milliliters per Second.
Model 8020
ETRIC
ODE
BUILT-IN
Pressure Unit Conversions
Pounds per Square Inch (PSI), Pounds per
Square Foot (PSF), Kilopascal, Megapascal.
Bending Moment Unit Conversions
Inch-pounds, Foot-pounds and Newtonmeters.
Temperature Unit Conversions
Degrees Fahrenheit and degrees
Centigrade.
Adds, Subtracts, Multiplies
and Divides
In all 60 units, including combinations,
i.e., 2 Gallons plus 3 Liters.
Works as a Standard Math
Calculator, too
With Memory, Paperless Tape and battery
saving Auto Shut-Off.
Convenience, Versatility and Accuracy!
ULTRA MEASURE MASTER
®
Professional Feet-Inch/Metric Calculator
Over 400 of the most-needed unit conversion
combinations right at your fingertips!
Model 8020
Ultra Measure Master Specifications
SIZE:
5.7" x 3.0" x 0.65" (145 mm x 76 mm x 17 mm)
WEIGHT:
4.15 oz. (117.7 gm) — does not include Pocket Reference Guide
POWER:
Single 3-Volt Lithium (CR-2016) Battery
DISPLAY:
11 Digits (7 Normal, 4 Fractions) with Full Annunciators
LCD DIMENSIONS:
0.73" x 2.56" (19 mm x 65 mm)
ACCURACY:
10 Digit Internal Accuracy
INCLUDED WITH EVERY
HEAVYCALC:
Easy-to-follow Pocket Reference Guide, Protective Hard Cover and Long-Life Battery
ONE-YEAR WARRANTY:
All Calculated Industries calculators and electronic tools are covered by a Full One-Year Limited
Warranty against defects in materials and workmanship. The full text of each warranty is published
in the documentation accompanying each product and at www.calculated.com. Calculated Industries
reserves the right to make changes in the materials and specifications of products without notice.
FAST…ACCURATE…EASY-TO-USE! Look how simple using the Ultra Measure Master is…
Enter dimensions just as you would say them.
Simply press the number and then “label” it as “Meters,”
“Feet,” or other unit of measure. For example, add
the following dimensions…
DIMENSION
252 Feet 6-1/16 Inches
150 Meters
2514 Millimeters
Total:
KEYSTROKES
252 [Feet] 6 [Inch] 1 [/] 16
[`] 150 [m]
[`] 2514 [mm]
[$] 752 FEET 10-35/64 INCH
Convert 252 Square Meters to other area dimensions.
STEP
Clear calculator
Enter 252 Square Meters
Convert to Square Feet
Convert to Square Yards
Convert to Hectares
KEYSTROKE
[On/C][On/C]
252 [Sq] [m]
[CONV] [Feet]
[CONV] [Yds]
[CONV] [SHIFT] [4]
DISPLAY SHOWS
0.
252 SQ M
2712.505 SQ FEET
301.3895 SQ YD
HECT 0.0252
Convert 126 liters to other volume dimensions.
STEP
Clear calculator
Enter 126 Liters
Convert to Gallon
Convert to Fluid Ounce
KEYSTROKE
[On/C][On/C]
126 [liters]
[CONV] [gal]
[CONV] [fl oz]
DISPLAY SHOWS
0.
126 L
33.28568 GL
F-OZ 4260.567
Convert 252 Square Feet to other dimensions.
STEP
Clear calculator
Enter 252 Square Feet
Convert to Square Inches
Convert to Square Yards
Convert to Square Meters
Convert to Square cm
Convert to Square mm
Convert to Square Miles
Convert to Square km
KEYSTROKE
[On/C][On/C]
252 [Sq] [Feet]
[CONV] [Inch]
[CONV] [Yds]
[CONV] [m]
[CONV] [cm]
[CONV] [mm]
[CONV] [Miles]
[CONV] [km]
DISPLAY SHOWS
0.
252 SQ FEET
36288 SQ INCH
28 SQ YD
23.41157 SQ M
234115.7 SQ CM
2.34116 07 SQ MM
0.000009 SQ MI
0.000023 SQ kM
Find the volume of a rectangular container 3 Feet by 1 Foot 95/8 inches by 2 Feet 4 Inches. Convert to Centimeters and
Yards.
STEP
Clear calculator
Enter Length
Multiply by Width
Multiply by Depth
Convert to Cubic Centimeters
Convert to Cubic Yards
KEYSTROKE
[On/C][On/C]
3 [Feet]
[x] 1 [Feet] 9 [Inch] 5[/]8
[x] 2 [Feet] 4 [Inch] [=]
[CONV] [cm]
[CONV] [Yds]
DISPLAY SHOWS
0.
3 FEET
1 - 9 5/8 FEET INCH
12.61458 CU FEET
357205.2 cu cm
0.467207 CU YD
Convert 150 pounds to kilograms.
STEP
Clear calculator
Enter 150 lbs
Convert to Kilogram
KEYSTROKE
[On/C][On/C]
150 [lbs]
[CONV] [kg]
DISPLAY SHOWS
0.
150 LB
68.03886 kG
Ultra Measure Master® and Calculated Industries® are registered trademarks
of Calculated Industries, Inc. © 2004. All rights reserved.
SS8015 • 6/04