Neo-Ray
DESCRIPTION
The Define series by Neo-Ray characterizes the ultimate in minimalist simplicity by
providing clean, uniform lines of illumination in virtually any architectural environment. Powered by Eaton’s most advanced linear LED technology, the Define series
delivers outstanding efficacy in a variety of profile widths. 1”, 2”, 3”, 4” and 5”
luminaire widths are all specifiable to the nearest inch in length and can be fitted
with standard flush, regress and drop lensing. In wall corners and wall to ceiling
transitions can all be ordered as standard components and blend seamlessly into
the most complex architectural spaces. Custom transitions are also available.
Robust construction and adaptable, modular components make installation simple
and ensure laser straight runs.
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
Construction
Housing trim extruded from 6063
aluminum. Nominal 2’ -12’ illuminated
sections. Used in run configuration
and/or individual fixtures. All
components are RoHs compliant.
Lens
Snap in lens available in flush and
drop lens profiles. End brackets include
closure to prevent moisture and insect
ingress.
Finish
Fixture housing trims are high
reflectance white using electrostatically
applied polyester powder coat paint.
Electrical
Long-life LED system coupled with
electrical driver to deliver optimal
performance. LED’s are available in
2700K, 3000K, 3500K or 4000K with
a typical CRI ≤ 85. Projected life is
131,000 hours at L70. Electronic drivers
are available for 120-277V applications.
Fixtures and electrical components
certified to UL and CUL standards.
Fixtures are damp location listed and IC
rated. For Chicago plenum, specify CP
in fixture options.
with most standard dimming
devices (refer to website for specific
compatibility reference). Combine
with FifthLight DALI and other
energy saving products like sensors,
daylighting controls and building
management systems to maximize
energy savings.
Warranty
Five year warranty.
Controls
Equipped standard with a 0-10V
continuous dimming driver compatible
DEFINE 3
Mounting
Recessed.
3”
76 mm
LED
3”
76 mm
Recessed
Direct
cULus – 1598
Damp Location Listed
LM79/LM80 Compliant
ROHS Compliant
5”
127 mm
4”
102 mm
4” TechZone Compatible
2.68”
68 mm
2.68”
68 mm
4”
102 mm
4”
102 mm
ORDERING INFORMATION
Sample Number: S123-DR-2-35-ETG-0048-1-U-DD-1-W
Series
Light Distribution
S123 = D
efine 3
QS-S123 = Define 3 Quick Ship
DR = D
irect Recessed
RDR = Regressed Direct
Recessed
Circuiting
1 = Single Circuit
2 = Dual Circuit
Voltage
1 =
2 =
U =
3 =
120V
277V
Universal (120V-277V)
347V6
Light Level1
Color Temperature
LO = Light Level LO (1740 Lms @ 28 W)
(435 Lumens per ft @ 5 W)
1 = Light Level 1 (2380 Lms @ 28 W)
(595 Lumens per ft @ 7 W)
2 = Light Level 2 (3503 Lms @ 44 W)
(875 Lumens per ft @ 11 W)
Integral LED Driver
ED = Non-Dimming
DD= 0-10 Volt Dimming
5L = DALI Dimming7
27 =
30 =
35 =
40 =
LED 2700K
LED 3000K
LED 3500K
LED 4000K
Emergency Options
B = Battery Pack
E = Emergency
T = Transfer Switch
8
Celing Type2
Length3
ETG = 15/16” T-Grid
FTG = 9/16” T-Grid
STG = 9/16” Slot T-Grid
ETT = 15/16” Tegular T-Grid
FTT = 9/16” Tegular T-Grid
GYP = Gypsum board
FSR = “Flangeless” Gypsum Board
FES = “Finished” Extruded Side
Options9
CP = Chicago Plenum
SV = Integrated Sensor
CR = Corner
0024 =
0036 =
0048 =
0072 =
0096 =
0144 =
XXXX =
2’ Individual4
3’ Individual4
4’ Individual
6’ Individual
8’ Individual
12’ Individual
Configurable Run5
Shielding
Color
1 = Satin Flush Diffuser
3 = Asymmetric Flush Optic10
4 = Satin Drop Diffuser
11
W =
S =
B =
C =
Matte White
Silver
Black
Custom Color
Grey bar denotes available Quick ship options
See page 5 for Technical Notes
Specifications and dimensions subject to change without notice.
See additional information on the following pages.
TD519005EN
04/13/2017
1 of 5
Neo-Ray - Define - Recessed
P H O T OMETRICS
All data certified to LM-79 standards in a NAVLAB approved testing facility
FILE NAME: S123-DR-1-35-ETG-0048-1-U-DD-1-W
90°
CCT: 3500K
234
75°
469
938
0°
WATTS: 28 W
60°
703
0 deg
90 deg
LUMENS: 2380 Lms
LPW: 85 LPW
45°
TEST NUMBER: P33912
30°
LUMINANCE DATA (CD/M2)
15°
ZONAL LUMENS SUMMARY
Zone
75°
690
8106
7518
45º
8562
0º-30º
698
29
55º
8006
7762
0º-40º
1121
47
65º
7379
7023
6769
0º-60º
1914
80
75º
6191
5983
5734
0º-90º
2380
100
85º
4072
4072
4072
90º
LUMENS: 3503 Lms
WATTS: 44 W
LPW: 79 LPW
45°
TEST NUMBER: P33923
30°
LUMINANCE DATA (CD/M2)
15°
473
% Fixture
45º
12684
12212
11908
1027
29
55º
11812
11418
11043
0º-40º
1649
47
65º
10891
10407
9924
0º-60º
2818
80
75º
9182
8642
8227
0º-90º
3503
100
85º
6046
6046
5676
CCT: 3500K
LUMENS: 2805 Lms
WATTS: 27.5 W
45°
30°
15°
45º
Lumens
60°
1420
0º
Zone
75°
947
Vertical Angle
0º-30º
FILE NAME: S123DR-135-GYP0048-1-UDD-3-W
90°
1893
0°
8304
% Fixture
ZONAL LUMENS SUMMARY
0 deg
90 deg
90º
Lumens
60°
1035
0°
45º
CCT: 3500K
345
1380
0º
FILE NAME: S123-DR-2-35-ETG-0048-1-U-DD-1-W
90°
0 deg
90 deg
Vertical Angle
LPW: 102 LPW
TEST NUMBER: G2-1612-022-2
ZONAL LUMENS SUMMARY
CANDELA DISTRIBUTION (CD)
Vertical Angle
0º
90°
180º
270°
0º
1011
1011
1011
1011
752
10º
992
1531
992
20º
914
1889
919
637
25º
863
1786
869
609
30°
803
1398
812
583
40°
666
701
675
526
Zone
Lumens
% Fixture
50°
500
441
512
443
0º-30º
909
32.4
60°
335
311
343
336
0º-40º
1454
51.8
70°
187
184
192
214
0º-60º
2339
83.4
80°
67
68
71
88
0º-90º
2805
100.0
90°
0
0
0
0
LU ME N MAINTENANCE
Ambient
Temperature
TM-21 Lumen
Maintenance
(100,000 hours)
Theoretical
L70
(Hours)
25°C
84.29%
131,000
Eaton
18001 E. Colfax Avenue
Denver, CO 80011
P: 303-393-1522
www.eaton.com/lighting
Specifications and dimensions subject to change without notice.
See additional information on the following pages.
TD519005EN
04/13/2017
2 of 5
Neo-Ray - Define - Recessed
M OUNTING
Extruded Trim Flange Details - Refer to submittal drawings for detailed flange information - for additional options consult factory.
ETG 15/16”
T-Grid
FTG 9/16”
T-Grid
GYP
Gypsum
Board
FTT 9/16”
Tegular
T-Grid
ETT 15/16”
Tegular
T-Grid
STG Slotted
T-Grid
2ft Individual (0024)
Wire Feed
FSR
“Flangeless”
Gypsum Board
8ft Individual (0096)
23”
(584mm)
95”
(2413mm)
Wire Feed
Mounting Locations
2.18”
(56mm)
18 5/8”
(473mm)
Mounting Locations
2.18”
(56mm)
90 5/8”
(2302mm)
2.18”
(56mm)
4ft Individual (0048)
Wire Feed
FES
Finished
Extruded Side
2.18”
(56mm)
12ft Individual (0144)
47”
(1194mm)
Mounting
Locations
143”
(3632mm)
Wire Feed
Mounting Locations
2.18”
(56mm)
42 5/8”
(1083mm)
92”
(2337mm)
2.18”
(56mm)
2.18”
(56mm)
46 5/8”
(1184mm)
2.18”
(56mm)
LE N S DETAIL
1”
26 mm
1”
26 mm
Satin Flush Diffuser
Asymmetric Flush Diffuser
Eaton
18001 E. Colfax Avenue
Denver, CO 80011
P: 303-393-1522
www.eaton.com/lighting
Regressed Satin Diffuser
Satin Drop Down Diffuser
Specifications and dimensions subject to change without notice.
See additional information on the following pages.
TD519005EN
04/13/2017
3 of 5
Neo-Ray - Define - Recessed
C E I LING TYPE
ALL GRID TYPES SHOWN
FSR: “FLANGELESS” GYPSUM BOARD
GYP: GYPSUM BOARD
Eaton
18001 E. Colfax Avenue
Denver, CO 80011
P: 303-393-1522
www.eaton.com/lighting
Specifications and dimensions subject to change without notice.
See additional information on the following pages.
TD519005EN
04/13/2017
4 of 5
Neo-Ray - Define - Recessed
C E I LING TYPE continued
FES: “Finished” Extruded Sides
C OR N ER TRANSITION S
Consult factory for precise corner locations and for ordering.
24.188”
(614mm)
24.188”
(614mm)
24.188”
(614mm)
24.188”
(614mm)
T E C HNICAL NOTES
1. Additional lower light levels available. Please consult factory for specific details.
2. Not all ceiling types are shown; consult factory for specific ceiling types not listed.
3. All lengths are nominal. Actual sizes are one inch shorter than nominal to allow easy in-grid installation. For Gypsum or Flangeless
installations add 1 inch to overall fixture length. Refer to submittal drawings for actual sizes. See “Mounting” details for example.
4. Not all dimming options available for every length; please consult factory for specific details.
5. For configurable runs specify length to nearest inch. Standard runs ship in 12ft increments. Ensure to specify 8ft increments if 12ft are too
large to receive. Additional charges may apply; please consult factory for details.
6. 347V is achieved using remote transformer.
7. FifthLight DALI is achieved using digital analog converter.
8. Battery pack options are not available in every length; please consult factory for specific details. Battery pack is remote installation only.
9. For all options; consult factory for specific requirements.
10. Asymmetric lens is not available on regressed housing RDR.
11. Standard product is configured with snap-in lens end caps at the beginning and end of a run or individual fixture. End caps are provided for
ease of installation and removal of the lens and eliminate light leak from the end of the fixture when flush satin lens is selected. Please
contact factory if lens end-caps are not desired as alternate configurations are available.
Eaton
18001 E. Colfax Avenue
Denver, CO 80011
P: 303-393-1522
www.eaton.com/lighting
Specifications and dimensions subject to change without notice.
TD519005EN
04/13/2017
5 of 5