FOR IMMEDIATE RELEASE
For more information, please contact:
Rob Kennery
VP Sales & Marketing/General Manager
716.876.9951 ext. 3232
[email protected]
MOKON REDESIGNS THEIR HIGH TEMPERATURE (380°F)
DURATHERM MAX WATER SYSTEM LINE
BUFFALO, N.Y. – Mokon, a leader in high-quality circulating liquid temperature control systems, has
completed the redesign of its Duratherm MAX water system line. The new design incorporates a top air
discharge directing waste heat away from personnel, increased mechanical compartment ventilation,
greater access to components for maintenance, and improved overall performance of the system.
Mokon’s Duratherm MAX is a line of high performance water systems with temperatures up to 380°F
(193°C) and system pressures up to 300 PSI (20.7 Bar). Duratherm MAX is ideal for restrictive
processes and high temperature water applications.
The Duratherm MAX design features a stainless steel heater vessel that is designed and tested to
ASME standards. The system utilizes nonferrous and stainless steel materials of construction and a
seal-less magnetic drive turbine pump fitted with a stainless steel impeller. The Duratherm MAX
incorporates a unique fan-cooled heat exchanger that provides safe and dependable cooling of the
process fluid and eliminates thermal shock, flashing to steam, mineral buildup and expansion noise.
Standard Features:
• Up to 380°F (193°C) and system pressures up to 300 PSI (20.7 Bar)
• Single zone configurations
• Up to 24 kW heating capacity
• 1-1/2 to 5-1/2 Hp pumping capacities
• Magnetic drive seal-less turbine pump
• Stainless steel heater vessel designed and tested to ASME Code
• Air-cooled heat exchanger for rapid cooling
• Microprocessor-based controller in easily accessible panel
• SCR power controller extending heater life, fast cycling, and energy savings
• NEMA 12 rated electrical enclosure with safety door disconnect switch
• cULus 508A labeled electrical panel
• Meets NFPA 79 electrical safety standards
-more-
ABOUT MOKON – For over 60 years, Mokon has set the standard for high quality circulating liquid
temperature control systems. Through the development of new products, refinement of existing designs,
and our ability to create custom engineered solutions, Mokon has consistently demonstrated its ability to
foresee the evolving needs of customers in plastics, packaging, converting, composites, food
processing, pharmaceutical, chemical processing, rubber, printing, general processing and many more
industries.
The company’s product line has grown significantly since it first introduced a water temperature control
system in 1955 to include heat transfer oil systems, portable and central chillers, pump tanks, cooling
towers, blown film coolers, cold climate coolers, engineered and pre-engineered control panels,
maintenance products and custom designed/engineered systems.
Mokon’s circulating liquid heating and chilling equipment is proudly designed and manufactured in the
USA. Mokon is an ISO 9001:2008 and ISO 14001:2004 certified company.
For more information, please stop by the Mokon booth at the Interphex show – Booth #1959 or
contact Mokon, Buffalo, NY 14207. Phone: 716.876.9951 Fax: 716.874.8048 E-mail:
[email protected] or visit www.mokon.com.
###