Red Nosed Reindeer
Stand Up
Instruction Sheet
Great character design for window and shop displays
or as a decor or gift item to sell to your customers.
Materials:
#40077 Red Nosed Reindeer x 1
#99379 11” Mocha Brown latex (100ct) x 8 pieces
#68776 5“ Chocolate Brown latex (100ct) x 8 pieces
#43599 5” Red latex (100ct) x 6 pieces
#43548 5“ Onyx Black latex (100ct) x 2 pieces
#99384 350Q Mocha Brown latex (100ct) x 1 piece
#99383 260Q Mocha Brown latex (100ct) x 2 pieces
Extras needed:
Spare 260Q’s for tying
Weight
Instructions:
1 - Inflate four 11” Mocha Brown latex balloons to 8” and create a four balloon
cluster. Tie to a weight using a spare 260Q.
2 - Air inflate the 350Q leaving 3” uninflated and tie the knot end into the base
cluster.
3 - Inflate four 5” Chocolate Brown latex balloons to 4” and create a four
balloon cluster. Wrap this cluster between the base cluster and the
350Q.
4 - Inflate four 11” Mocha Brown latex to 8” and create another four
balloon cluster. Tie this cluster onto the uninflated end of the 350Q
5 - Make another four balloon cluster with 5” Chocolate Brown latex
sized to 4” and tie above the top cluster.
6 - Helium inflate the Red Nosed Reindeer foil. Tightly roll up and tie
the neck of the foil with a spare 260Q. Use this 260Q to tie the foil
into the top clusters.
FOUR
BALLOON
CLUSTER
Inflate and size 2 balloons
then tie the necks together
into a Duplet. Repeat to make
a second Duplet, then twist
the two pairs together to
make the cluster, making
sure the knots remain in the
centre
More ideas and instruction sheets are available to professionals at
“Instruction Sheets”, “Balloon Ideas” and “Balloon Images”
on qualatex.com and thequalatexevent.com
7 - To make the “arms” - Inflate a 260Q Mocha Brown latex to 14” and tie.
Starting at the knot end, make two 1” Pinch Twists. Repeat to make a
second arm and tie the two arms together at the uninflated ends.
Wrap the arms into the top 11” cluster.
8 - Inflate two 5” Onyx Black latex to 4” and tie separately. Wrap the
necks into the pinch twists.
9 - Inflate three 5” Red latex to 3” and tie the necks together to create a
three balloon cluster. Repeat to make a second three balloon cluster and tie
into the bottom and top 4” Chocolate Brown clusters.
PINCH
TWIST
Create a bubble by pinching
the balloon and twisting it
several times. Make another
twist at the appropriate
bubble length, being sure
to twist in the same direction
each time.
Loop your index finger under the
bubble. Grasp the sides of the
bubble with your thumb & index
finger and stretch it up until you
can pinch the twists together.
Remove your index finger and twist
the pinched bubble at least 3 times
in one direction to secure
More ideas and instruction sheets are available to professionals at
“Instruction Sheets”, “Balloon Ideas” and “Balloon Images”
on qualatex.com and thequalatexevent.com