FINTEX WALLPAPER ADHESIVE, 5055
WALLPAPER ADHESIVE
For attaching all wallpaper types in dry or humid indoor conditions
Application: For gluing vinyl, textile, paper and non-woven wallpapers as well as glass fibre fabrics
Instructions for use:
The application area shall be cleaned of dirt and dust; uneven surfaces should be evened and sanded until smooth.
Old wallpaper shall be removed before gluing, and painted surfaces should be washed with detergent. High-gloss
painted surfaces should be sanded to a matte finish, and any sanding dust should be brushed away. Porous surfaces
should be primed with 30% thinned adhesive or undiluted 5002 Fintex 2 primer. When gluing, the undiluted adhesive
is applied to a wall with a painter roller - two to three wallpaper tile sections at a time. The adhesive application rate
is 250-350 g/m2, depending on the quality of the wallpaper and the respective surface. Apply the wallpaper, e.g., with
a plastic spatula, within 30 minutes of applying the adhesive at the latest. Attachment on porous surfaces is to be
carried out immediately after applying the adhesive. The process temperature should be above 15° C and relative humidity up to 80% (RH). The drying time of the adhesive is 12 hours, after which glass fibre wallpaper may be primed.
Any adhesive stains can be removed with a damp sponge before the adhesive dries. Wash tools with water immediately after use. Please note that abnormal air temperatures and humidity affect drying times significantly.
Applications:
• Concrete and smoothed surfaces
• Painted and plastered surfaces
• Primed wall surfaces
• Drywall surfaces
• Chipboard surfaces
• Wood fibre board surfaces
• Suitable for mechanical adhesive applicators
Properties:
• PVAc-based dispersion adhesive
• Water-dilutable
• Made in Finland
• White in colour. When dry, colourless glue seam
• Odourless
• Good initial adhesiveness
• M1 emission classification of building materials
• Must be protected from freezing
Storage: May be kept for up to 12 months in its original packaging in dry and
cool conditions, at the temperatures +10 to +20 ° C. Opened containers must
be used within one month.
Pack sizes: 5,10 and 15 l
Transportation: The product is sensitive to frost and requires a warm transport.
Tint: This may not be the exact colour tone according to the Interior Paint
Colour Chart. Actual results can vary slightly.
Safety:The product is not classified as dangerous. A separate Material Safety
Data Sheet is available on the product.
Environment protection and waste disposal:
The water used for washing and cleaning tools can be poured down the drain.
The dry product is landfill eligible.
Technical specifications:
Dry matter content
Density
Working time
Painting supplies group
Thinner
Washing of tools
Combustibility
Approx. 9%
1.02 kg/l
Max 30 min
548 (RT classification)
Water. Thinning the adhesive is not recommended.
Water
Not combustible
Yield:
Approx. 3 - 5 m2/l, the application rate of
the adhesive depends on the quality of the
substrate, n. 250 - 350 g/m2
Drying time:
Touch dry after approx. 4 h. Wallpaper
primer approx. 12 h.
Mäkirinteentie 13, FI-36220 KANGASALA • Puh.+358 20 785 1210
E-mail: [email protected]