DeLaval side-by-side stall
Milking has never been easier
Features that help make milking a
comfortable and natural process
Individual sequence gates
DeLaval side-by-side stall incorporates individual
sequence gates that enable the cow to enter her stall
as naturally and comfortably as possible. By doing
so, she is then automatically in the ideal position
for milking. This saves you a lot of time that would
otherwise be spent on getting the cows in the correct
position for milking.
Splash guards
Splash guards further help the cows to achieve the
desired position, again making milking a speedy
process. The high splash guards also facilitate in
keeping the stalls clean, so that a hygienic environment is maintained for both cows and milkers.
Individual sequence gates enable cows to enter as
comfortably as possible.
Kick-guard pipes
DeLaval side-by-side stall also features dependable kick-guard pipes. These pipes are strategically
placed in the stalls so that the milker is well protected
and yet has full and easy access to the udder. In
this way the milker does not have to face any undue
interference or discomfort during the milking process.
Conventional Exit
Sequence gates are lifted up by an electrical drive
unit at the same time that the exit gate opens and the
cows walk out. Sequence gates are lowered before the
entrance of the next group of cows. Can be equipped
with a breast rail or In Parlour Feeding (optional).
A calm, natural process
Great thought has been given to ensure that the
cows are as calm and comfortable as possible during milking. The cows are so well positioned in the
stalls that it makes it almost impossible for them to
move sideways or kick backwards. You are assured
of a milking process that is not only efficient, but
also safe and practical.
High splash guards help maintain stall cleanliness, for
herd and milker alike.
Front exit lets cows exit the stall quickly and comfortably.
Front exit
DeLaval side-by-side stall is designed to maintain
a steady stream of cows entering and exiting the
milking stalls. The cows enter the stalls and stand
facing the exit. Hence, once milking is completed
and the cows are ready to exit the stall, they leave
quickly and comfortably, making way for the next
cow to enter the stall.
A simpler method of milking
DeLaval side-by-side stall promotes milking from
behind. This method has been widely regarded as
a simpler and more comfortable way of milking
cows. This is because milkers are ensured of easy
reach and a good view of the udder without any risk
to safety. (We recommend a 6-10% gradient on the
stall platform, as this will make for ideal access to
the udders. The incline will also enable your cows
to exit the stalls even faster.)
“DeLaval side-by-side stall is very comfortable and
simplifies my work.
The cows are calm and the milking throughput is high. The
milking used to take one hour, now it only takes 40 minutes.
Thanks to the front exit I save a lot of time.
I am really satisfied with my installation. If I had to
consider the same investment, I would do it again.”
– Phillippe Rouille, France
www.delaval.com
Front exit
1000
Technical data
Available parlour sizes: 1x3 – 2x12
Stall centres:
685 mm
Pit width at floor level: 2300 mm
Pit width at top level: 2000 mm
Pit depth:
1000 mm
(1240 mm with
DeLaval
adjustable
floor)
Pit length:
(No. of stalls
x 685 mm)
+ 2250 mm
Standard features
- Galvanised pit edge, cantilevered
or bolted
- Transparent splash guard
- Entrance gate with manual or
vacuum control
Options
- Identification assembly kit at entrance
- Stainless steel splash guard with
manure gutter
- DeLaval adjustable floor
Front exit stall
- Manually operated exit
- Air pressure operated exit as option
Conventional exit stall
- Electrical controlled exit function
- Vertical sliding exit gate
- Breast rail
- In Parlour feed mangers as option
The manufacturer reserves the right to make design changes.
Printed on environmentaly friendly paper.
DeLaval is a trademark of the DeLaval Group.
11758-en/0202
Conventional exit