PRC100
Assembly Instructions
Parts
Tools Required: Phillips Screw Driver #3
Part B
1 PC
Part A
1 PC
Part F
1 PC
Part D
1 PC
Part C
1 PC
Part H
D
1 PC
Part G
1 PC
Part E
(longer)
1 PC
Part I
(shorter)
1 PC
G
Accessories
Screw
1 PC
F
1
4
Knob 3
2 PC
Knob 2
2 PC
Screw 4
8 PC
Washer 7
1 PC
D
4
E
5
Knob 5
3 PC
4
H
I
5
C
4
5
4
Caster 6
4 PC
4
4
4
3
(2 locking, 2 non-locking)
3
Step 1: Assemble Base
2
1) Attach part (A) to part (B) using screw # (1) and washer # (7)
2
Step 2: Assemble Top
1) Slide part (C) over the upright stem of part (B)
and secure with knobs # (2)
2) Slide longer tube of part (E) into the tube on part (C)
and longer tube of part (I) into the second tube on part (C)
as picture in the diagram. Secure with knobs # (3).
3) Attach part (D) to underside of part (G) and
part (H) to underside of part (F) and secure
using screws # (4)
B
6
6
7
A
(Locking caster)
4) Slide part (D) with attached tabletop onto
protruding tubes of part (E) and part (H) with attached
tabletop onto attached part (I) and secure with knobs # (5).
Note: the lager platform should be directly above the longer side of part (B).
1
6
6
(Locking caster)
Step 3: Assemble Casters
1) Insert casters # (6) into bottom of base part (A)
and (B)
Step 4: Adjusting Tops
1) Adjust height of top using knobs # (2)
and # (3)
2) Adjust angle of top using knobs # (5)
149 Entin Road Clifton, NJ 07014
Telephone 973-594-9000 800-261-4112
www.oklahomasound.com