Merione 22 Light Cruiser is a multifunctional novelty boat. When
building it, we combined our expertise of light structures with
modern electric propulsion technology and achieved surprising
properties.
•
•
•
•
Co emissions: 0 g
Particulate emissions: 0 g
Fuel: 0 l/nm
Noise: lapping of the waves.
• Length nearly 7 m
• Hull weight less than 500 kg
• Speed: more than 20 knots.
Cooperation partners:
In Time Yachts Oy, Naantali, Finland
www.in-time-yachts.fi
Savoy Land & Sjöentreprenad AB, Sverige
www.savoy.nu
Light constructions, hard solutions
Modern technology
Merione is equipped with high quality electric propulsion. Thanks to
the hull design and lightness of the boat, the immediate power of the
electric motor accelerates Merione to more than 20 knots in no time.
Merione is compatible with a hybrid solution, inboard drives or normal outboard motor if pure electric motor is not an option.
2,25 m
6,8 m
1,3 m
6 knots
8 knots
10 knots
Detailed design
We have given Merione the properties of a commuter boat and implemented details that we think are important to improve user experience. Also a cabin cruiser configuration is available.
Easy to carry tall items.
Motor protected from
rear-end collision.
Matrasses fit into compartments
in the benches.
Inner module includes plenty
of hatches and storage space.
Less than 750 kg with a trailer
makes a light trailer!
The boat can be customized
for people with reduced
mobility.
Seating space for a
Light but strong epoxy composites
large group.
do not absorb water or rot.
Side decks can be used as stepping boards.
The boat is easy to enter from every direction.
World class hydrodynamics
Merione’s frame was designed by Pekka Eivola. Pekka is specialized in optimizing watercraft hydrodynamics. His expertise shows in
Merione’s position, wave elevation and minimal hull resistance – as
well as directional stability in slow speed.
15 knots
20 knots
25 knots
Less is more
Practical & pretty
Merione’s deck and interior were designed by Pekka Vahtera. Smallscale production allows various modifications. Pekka has combined
various functions in the structures without compromising quality. Versatile and exact use of raw materials helps save natural resources and
promotes sustainable development.
Daycruiser
Commuter boat
Fishing boat
An experience
Utilize Merione’s small-scale production methods
and equip your boat to match your needs. We have
designed various practical and pretty assemblies to
spread your environmentally friendly boating.
Extras
5 kg • Wood cladding
Epoxy saturated thin wood cladding on the windshield frame
and pulpits.
6 kg • Table
Composite table, aluminum support.
2 kg ‌• Rod holders
Light rod holders for fishing.
60 kg ‌• Forecabin + a toilet unit
35 kg ‌• Pantry
Replace map table with counter, sink, tap, drawers, fridge,
water container.
Make a little bow cabin to spend the night onboard.
4 kg ‌• Tarp
To cover open space.
20 kg ‌• Move it - roof
Hard roof made of composite,
3 positions:
- on top of the cabin,
- on top of the pit,
- on top of the motor.
Propulsion examples
Merione’s construction enables various motors and
drives as the power source.
Energy source
Electricity 48 V
Electricity 345 V
Device example
Pod
Oceanvolt 15
Outboard
Torqeedo Deep Blue 80 R
Power
15 kW (20 hp)
50 kW (80 hp)
Generator
Kohler 10 kW, Gas, 150 +
30 kg, fuel tank 60 l
Top speed
~15 kn
> 20 kn
Batteries
8 kWh (or more)
32 kWh, BMW
Total weight
(boat + propulsion)
450 + 200 kg (+ 180 kg)
450 + 500 kg
Range
5 kn ~ 25 NM
15 kn ~10 NM
6 kn ~ 35 NM
20 kn ~20 NM
Charging time
3 v (e.g. 5 kW), ~2 h
220 V 10 A 4 h
3 v (e.g. 8 kW), ~ 4 h
220 V 10 A ~15 h
Charging cost
per a nm
(1 kwh = 0,15 €)
5 kn
10 kn
15 kn
20 kn
0,14 €/ NM
0,18 € / NM
0,25 € / NM
0,27 € / NM
Weights are estimations.
Main specs
Head designers: Pekka Eivola, Pekka Vahtera
Design team: Viljami Vahtera, Andreas Tainio
Builder: In Time Yachts Oy, Naantali, Finland
Main measures
CE Area C, 6 persons
Lenght 6,75 m
Beam 2,1
Draft 0.4
Weight: ~ 450 kg without the propulsion system and batteries / fuel
About the structures
Made of epoxy composites, sandwich structure.
100% water resistant.
Painted surfaces; some structures can be coated with epoxy saturated veneer.
Standard equipment
Boat without the propulsion system with 12 V supply voltage and battery.
Contact us for price and detailed specs.
Join the foregoing people !
We started to build the first Merione in
Naantali in late autumn 2016.
Follow the boat being built on our website www.in-time-yachts.fi or facebook
@intimeyachts
Pre-order for your benefit!
We offer a great benefit for preorders: your choice of extra equipment for free. The offer is valid until further notice.
Sales:
www:in-time-yachts.fi
tel +358 2 4359 036
mob +358 400 883 266
[email protected] or
[email protected]
Sales Sweden and Norway:
www.savoy.nu
tel +46 70 9399 050
[email protected]
[email protected]