Commonwealth
of Australia
No. TC 17/17, Wednesday, 5 April 2017
Published by the Commonwealth of Australia
Gazette
TARIFF CONCESSIONS
CONTENTS TCO Applications..................................................................................................... 2
TCO Applications Refused...................................................................................... 5
TCOs Made............................................................................................................... 6
Comptroller-General of Customs Initiated - Intention to Revoke Cancelled ....... 9
Local Manufacturer Initiated - TCOs Revoked ..................................................... 10
Intention to Revoke TCOs not used in over 2 years ........................................... 11
TCOs Revoked – unused for over 2 years ........................................................... 13
TCOs Revoked and Re-Issued - Transcription Error .......................................... 15
Comptroller-General of Customs Review of TCO Revocations ......................... 16
The Commonwealth of Australia Tariff Concessions Gazette
(the Tariff Concessions Gazette) is free of charge on the DIBP
internet site at:
http://www.border.gov.au/Busi/domestic-manufacturers-and-importers
The Tariff Concessions Administration Section is located at 5 Constitution Ave Canberra City 2601 Contact details:
General Email Inquiries:……………………………[email protected]
General Inquiries: ..............................................................(02) 6229 3567 TAPIN help desk: ...............................................................(02) 6275 6534 Facsimile:...........................................................................(02) 6223 8180 Cat. No. ISSN 0813-8389
©Commonwealth of Australia, 2017
2
TCO Applications
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
TCO Applications
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE. Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days
of the date of publication of this Notice. The operative date (Op.) and TC reference number follow the description of goods. To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods. Objections to the making of TCO submission forms are available at http://www.border.gov.au/Forms/Documents/b444.pdf
Contact: Email [email protected]
THE TABLE
Description of Goods including the
Customs Tariff Classification
4418.60.00
BEAMS, GLUED AND LAMINATED TIMBER, having ALL of the
(a) width NOT less than 40 mm and NOT greater than
(b) length NOT greater than 18 m;
(c) NOT less than 2 layers and NOT greater than 20
(d) wood moisture content NOT less than 6% and NOT
than 15%
Op. 06.03.17
Schedule 4 Item Number
General Duty Rate
following:
350 mm;
50
layers;
greater
- TC 1725805
Stated Use:
As building material for houses, sporting facilities, industrial
structures and bridges
7326.90.90
Applicant: STRONGBUILD COMMERCIAL PTY LTD
5%
FLUE GAS DUCTS, RECUPERATOR, GAS RECOVERY SYSTEM, including ALL
of the following:
(a) modules;
(b) flanges;
(c) adapters;
(d) plates;
(e) shims;
(f) compensator
Op. 02.03.17
50
- TC 1725296
Stated Use:
Removal of waste gas from steel rolling mill furnaces
7326.90.90
Applicant: ONESTEEL NSW PTY LTD
5%
PALLET INLOADERS, with OR without ANY of the following:
(a) stabiliser with OR without braces;
(b) safety pins;
(c) stanchions AND/OR struts;
(d) supports, metal AND/OR wood AND/OR rubber;
(e) document compartment
Op. 14.03.17
50
- TC 1728231
Stated Use:
For transporting large concrete and/or wooden walls and ceilings
Applicant: MRSK PTY LTD
5%
3
TCO Applications
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Description of Goods including the
Customs Tariff Classification
8412.90.90 Schedule 4 Item Number
General Duty Rate
PARTS, HYDRAULIC MOTOR, down hole, being lower assemblies
including ALL of the following:
(a) transmission;
(b) fixed bend housing;
(c) driveshaft sub-assembly including ALL of the following:
(i) bearings;
(ii) catch;
(iii) spacers,
(d) stator adaptor housing
Op. 03.03.17
Stated Use: Used as components of down hole mud motors for oil and/or gas
wells 50
- TC 1725509
Applicant: SCHLUMBERGER AUSTRALIA PTY LTD 8422.30.90 TEA AND/OR COFFEE BAG FILLING, CLOSING AND SEALING MACHINES
Op. 06.03.17
5%
50
- TC 1725866
Stated Use: For filling, closing and sealing small bags as part of tea or coffee bag manufacturing
Applicant: FRESHFOOD TRADING AUSTRALIA PTY LTD 8427.10.00 TRANSFER TRUCKS, HOSPITAL BED, battery powered
Op. 14.03.17
5%
50
- TC 1728222
Stated Use: Move patient beds in hospitals and associated environments
Applicant: STAMINALIFT INTERNATIONAL LTD
8428.90.00 TURNSTILES, STEEL COIL STORAGE
Op. 08.03.17
5%
50
- TC 1726838
Stated Use: For the storage of steel coils in steel coil processing lines 8428.90.00 Applicant: BLUESCOPE STEEL (AIS) PTY LTD
5%
BRIDGE STACKERS, STEEL COIL, having a maximum lifting capacity
of 5 000 kg per coil
Op. 14.03.17
50
- TC 1728217
Stated Use: Automatically lifts and stacks steel coils on a packaging and labelling line Applicant: BLUESCOPE STEEL (AIS) PTY LTD
5%
8428.90.00 COIL CARS, STEEL SLITTING LINE, being ANY of the following:
(a) flexible coil storage cars;
(b) fixed coil storage saddle cars;
(c) entry coil cars;
(d) exit coil cars
Op. 16.03.17
50
- TC 1729043
Stated Use:
For loading, unloading and storage of steel coils for processing
in a slitting line
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
5%
4
TCO Applications
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Description of Goods including the
Customs Tariff Classification
8438.20.00 CHOCOLATE MANUFACTURING LINE, having ALL of the following:
(a) raw material handling AND transfer AND storage AND pigging stations; (b) storage vessels;
(c) mixers;
(d) blending AND dosing station;
(e) chocolate refiners AND conches stations;
(f) transfer pumps;
(g) storage tanks;
(h) piping
Op. 07.03.17
Schedule 4 Item Number
General Duty Rate
50
- TC 1726515
Stated Use: For manufacturing chocolate 8474.10.00 Applicant: HAIGHS PTY LTD
5%
PULSATING JIG ASSEMBLIES, MINERAL ORE PROCESSING PLANT,
including ALL of the following:
(a) jig sumps;
(b) screens;
(c) control panel;
(d) screen vibrators;
(e) jig frame;
(f) sprayers;
(g) pumps
Op. 06.03.17
50
- TC 1726088
Stated Use:
For the washing, screening and separating of mineral ores from
mined earth material
8479.89.90 Applicant: ONESTEEL MANUFACTURING PTY LTD 5%
SHOCK ABSORBERS, VISCOELASTIC VIBRATION DAMPING, including BOTH
of the following:
(a) viscous fluid, being ANY of the following:
(i) bitumen;
(ii) polybutene;
(iii) silicone based,
(b) top plate mounted piston
Op. 08.03.17
50
- TC 1726836
Stated Use:
To reduce vibrations in industrial piping systems such as power
plants and also used to reduce vibrations associated with
industrial engines
Applicant: HANGERS AUSTRALIA PTY LTD
5%
5
TCO Applications and
TCO Applications Refused
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Description of Goods including the
Customs Tariff Classification
8483.40.90
Schedule 4 Item Number
General Duty Rate
PUMP DRIVES, PROGRESSIVE CAVITY PUMPING, top mount, electric
AND/OR hydraulic, complying with International Standard 15136-2
(ISO 15136-2), being belt OR gear driven, having ANY of the
following:
(a) motor;
(b) stuffing box;
(c) fittings;
(d) adapter plates AND flex couplings;
(e) low stuffing box pressure switch;
(f) tachometer;
(g) stand;
(h) polished rod hold down hook;
(i) mechanical AND/OR hydraulic braking
Op. 15.02.17
50
- TC 1721331
Stated Use:
Transfer the drive power to the pump through a rod string for
oil & gas artificial applications
5%
Applicant: DOVER ARTIFICIAL LIFT PTY LTD
8504.40.90
CHARGERS, COMPUTER TABLETS, electromagnetic induction
Op. 24.02.17
50
- TC 1723470
Stated Use:
Inductive charging and mounting system for computer tablets
Applicant: AMBER TECHNOLOGY LTD
5%
TCO Applications Refused
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED
The application for the Tariff Concession Order for the goods described in the following TABLE has been
refused.
THE TABLE
Description of Goods including the
Customs Tariff Classification
8421.31.00
AIR FILTERS, GARDEN OR FORESTRY TOOL, INTERNAL COMBUSTION ENGINE
Op. 14.10.16
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Uniflow Australia T/A Unifilter Australia, West
Gosford, NSW
Schedule 4 Item Number
50
- TC 1660230
6
TCOs Made
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
TCOs Made
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of
substitutable goods may request the revocation of TCOs at any time.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3214.90.00 3506.91.90 3808.93.00 3919.90.90 3920.62.00 4016.99.00 5911.90.10 7326.90.90 7907.00.90 8418.69.00 COATING, INTUMESCENT, STRUCTURAL STEEL, un-mixed, including BOTH
of the following:
(a) ammonium polyphosphate;
(b) alkoyl silane
Op. 09.12.16
Dec. date 03.04.17
Schedule 4 Item Number
50
- TC 1677298
TAPE, double sided, acrylic adhesive, polyethylene laminated
kraft paper liner
Op. 01.01.17
Dec. date 03.04.17
- TC 1677620
HERBICIDES, having an active ingredient of mesosulfuron-methyl
Op. 13.12.16
Dec. date 03.04.17
- TC 1678407
50
50
FILM, polypropylene, thermosensitive, self-adhesive, in rolls,
multi-layered, having ALL of the following:
(a) width NOT less than 1 400 mm and NOT greater than 1 600 mm;
(b) coated biaxially oriented polypropylene (BOPP) film having
a thermosensitive layer;
(c) glassine liner having a basis weight NOT less than 54 g/m2
and NOT greater than 66 g/m2;
(d) rubber based adhesive
Op. 23.12.16
Dec. date 03.04.17
- TC 1681875
FILM, polyethylene terephthalate glycol, high shrinkage
Op. 15.12.16
Dec. date 03.04.17
- TC 1679204
AIR SPRINGS, TRUCK AND/OR BUS HAVING A GROSS VEHICLE WEIGHT
GREATER THAN 7.5 T, including metal fittings
Op. 23.12.16
Dec. date 03.04.17
DUST BAGS, VACUUM CLEANER, disposable, non-woven polypropylene,
having a plastic connector AND closure tab
Dec. date 03.04.17
Op. 05.01.17
INLET AND OUTLET DUCT CONNECTORS, GERMINATING AND/OR KILNING
VESSEL
Op. 04.01.17
Dec. date 03.04.17
ANODES, SACRIFICIAL ZINC, being EITHER of the following:
(a) embedded galvanic anode units, including ALL of the
following:
(i) zinc anode core;
(ii) steel tie wires;
(iii) cement based mortar shell,
(b) distributed anode system, having a zinc composition of NOT
less than 50%, including BOTH of the following:
(i) zinc AND steel core;
(ii) steel tie wires
Op. 14.10.16
Dec. date 29.03.17
COOLING UNITS, REFRIGERATION OR FREEZING, having an ambient
temperature rating NOT exceeding 43 degrees Celsius
Op. 17.11.16
Dec. date 29.03.17
50
50
50
- TC 1681873
50
- TC 1702183
50
- TC 1701448
50
- TC 1659798
50
- TC 1670411
7
TCOs Made
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Description of Goods including the
Customs Tariff Classification
8421.39.90
8422.20.00
8422.30.90
8424.89.90
8428.39.00
GAS SCRUBBER SKID, COMPRESSOR SUCTION AND DISCHARGE, with OR
without stairs, including ALL of the following:
(a) first stage suction scrubber;
(b) second stage suction scrubber;
(c) second stage discharge scrubber;
(d) third stage suction scrubber;
(e) third stage discharge scrubber;
(f) structural steel frame;
(g) valves;
(h) connecting pipes
Dec. date 03.04.17
Op. 01.01.17
WASHING MACHINES, PLASTIC CRATES, single AND/OR dual lane,
programmable logic controlled, capacity NOT less than 2 500
crates per hour per lane
Op. 09.12.16
Dec. date 30.03.17
FILLING AND CLOSING MACHINES, PAINT, programmable logic
controlled, multiple lane, having ALL of the following:
(a) container size recognition;
(b) track feeder AND line splitter;
(c) hoppers;
(d) lid dispenser AND press;
(e) cleaning unit;
(f) check weigher;
(g) pail denesting
Op. 29.12.16
Dec. date 03.04.17
CLEANERS, UNDER FLOOR, GERMINATION VESSEL, having BOTH of the
following:
(a) water pressure NOT greater than 100 bar;
(b) water consumption NOT greater than 400 L/min
Dec. date 03.04.17
Op. 29.12.16
ACCUMULATION AND CONVEYOR SYSTEM, LINEN, programmable logic
controlled, with OR without radio frequency readers AND/OR
antennae, having ALL of the following:
(a) free standing units;
(b) transport conveyors;
(c) buffer conveyors;
(d) powered curves;
(e) lift conveyors;
(f) roller conveyors;
(g) packaging unit front stack centre positioning;
(h) pushers;
(i) communication terminal
Op. 05.12.16
Dec. date 03.04.17
Schedule 4 Item Number
50
- TC 1677601
50
- TC 1677610
50
- TC 1682219
50
- TC 1682215
50
- TC 1675648
50
8
TCOs Made
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Description of Goods including the
Customs Tariff Classification
8428.90.00
8428.90.00
8428.90.00
8428.90.00
8431.39.00
8479.89.90
8479.89.90
8479.89.90
8479.89.90
OVERHEAD CARTON TRANSPORTERS, electric powered, programmable
logic controlled, including ceiling mountable rails
Op. 30.09.16
Dec. date 29.03.17
LUGGAGE SCREENING LINE, AIRPORT, automated, including ALL of the
following:
(a) tray feeder;
(b) x-ray machine base, without x-ray machine;
(c) conveyors;
(d) empty tray recognition unit with camera post;
(e) tray collector;
(f) trays
Op. 13.12.16
Dec. date 03.04.17
LAUNDRY FEEDERS, LINEN AND/OR PIECE GOODS, with OR without input
conveyor
Op. 03.01.17
Dec. date 03.04.17
LAUNDRY BATCH SEPARATORS, with OR without ANY of the following:
(a) input AND/OR output conveyor;
(b) input AND/OR output monorail;
(c) pre-separator;
(d) trolley lifter
Op. 03.01.17
Dec. date 03.04.17
PARTS, GRAIN TROUGH CONVEYOR, being plate link chain having ALL
of the following:
(a) pitch NOT less than 150 mm;
(b) inside chain width NOT less than 30 mm;
(c) chain width NOT less than 480 mm
Op. 07.12.16
Dec. date 03.04.17
EXTRUDERS, CELLULOSE FIBRE PROCESSING, twin screw, having ALL of
the following:
(a) electric motor;
(b) gearbox;
(c) counter rotating screws;
(d) heated barrels;
(e) crammers;
(f) extraction cyclones
Op. 17.11.16
Dec. date 31.03.17
Schedule 4 Item Number
50
- TC 1656237
50
- TC 1678589
50
- TC 1701006
50
- TC 1701020
50
- TC 1676038
50
- TC 1670403
SUCTION CUP ANCHOR SYSTEM, VACUUM, consisting of ALL of the
following:
(a) vacuum control module;
(b) suction anchors;
(c) hoses AND adapters;
(d) energy absorber;
(e) tensioners AND turn buckles;
(f) shuttles;
(g) ropes AND cables
Op. 25.11.16
Dec. date 03.04.17
- TC 1673249
FLUID BED PROCESSORS, bowl capacity NOT greater than 65 litres
Op. 05.12.16
Dec. date 03.04.17
- TC 1675650
MATERIAL HANDLERS, without attachments, having ALL of the
following:
(a) diesel engine NOT less than 85 kW power output;
(b) turning radius NOT less than 7 m;
(c) operating weight NOT less than 14 t;
(d) boom AND loading stick length NOT less than 8 m;
(e) elevation cabin;
(f) NOT less than eight solid OR pneumatic rubber tyres OR
tracked ;
(g) stabilisers AND/OR blade
Dec. date 03.04.17
Op. 15.12.16
50
50
50
- TC 1678919
9 TCOs Made and
Comptroller-General of Customs Initiated - Intention to Revoke
Cancelled
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Description of Goods including the
Customs Tariff Classification
8479.89.90
8480.71.00
8504.40.90
8507.20.00
8543.30.00
Schedule 4 Item Number
CRASH ATTENUATORS, IMPACT ENERGY ABSORBING, aluminium, vehicle
mountable, including ALL of the following:
(a) impact energy absorbing enclosures, with OR without energy
absorbing tubes;
(b) support frames;
(c) electro-hydraulic tilting docking station OR rotator;
(d) vehicular brake lights AND indicators
Op. 23.12.16
Dec. date 03.04.17
MOULDS, BOTTLE CLOSURE, having ALL of the Following:
(a) hot runner;
(b) multiple cavity for body;
(c) NOT less than 60 cavities for slider;
(d) NOT less than 40 cavities for overcap
Op. 29.12.16
Dec. date 03.04.17
CONVERTERS, ELECTRIC TRAM, AC AND/OR DC, power output NOT
greater than 750 V DC, having ALL of the following:
(a) rectifier AND inverter unit;
(b) braking energy recovery;
(c) dynamic voltage regulation;
(d) energy recovery to electricity network
Op. 23.12.16
Dec. date 03.04.17
BATTERIES, lead acid, having ANY of the following:
(a) positive plates AND negative copper stretched metal
plate;
(b) double separation plates having microporous AND corrugated
separators;
(c) 2 V cells with nominal capacities NOT less than 160 Ah and
NOT greater than 3 480 Ah at C/10
Dec. date 30.03.17
Op. 03.01.17
ANODES, IMPRESSED CURRENT CATHODIC PROTECTION, including BOTH of
the following:
(a) ceramic anode body incorporating an imbedded titanium wire;
(b) internal gas vents
Dec. date 29.03.17
Op. 14.10.16
50
- TC 1681980
50
- TC 1681981
50
- TC 1681876
50
- TC 1701444
50
- TC 1659778
Comptroller-General of Customs Initiated - Intention to Revoke Cancelled
CUSTOMS ACT 1901 CANCELLATION OF THE INTENTION TO REVOKE
The Request for revocation of the Tariff Concession Order for goods described in the following TABLE has been
cancelled.
THE TABLE
Description of Goods including the
Customs Tariff Classification
8601.10.00
LOCOMOTIVES, electric, having a weight NOT less than 130 tonnes
Op. 01.08.06 Dec. date 20.10.06
Schedule 4 Item Number
50
- TC 0612793
10 Local Manufacturer Initiated - TCOs Revoked
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Local Manufacturer Initiated - TCOs Revoked
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION
ORDERS REVOKED
The Tariff Concession Orders for the goods described in the following TABLE have been revoked.
THE TABLE
Schedule 4 Item Number Last Date of Effect
Description of Goods including the
Customs Tariff Classification
3907.61.00 POLYETHYLENE TEREPHTHALATE, COPOLYMER, having an intrinsic
viscosity NOT less than 0.90 and NOT greater than 1.05
decalitres per gram
Op. 01.01.17
Dec. date 14.12.16
50
27.02.17
- TC 1663735
Substitutable goods produced in Australia in the ordinary course
of business by LyondellBasell Australia Pty Ltd, South Yarra, Vic. In transit provisions apply
3907.61.00 POLYETHYLENE TEREPHTHALATE, homopolymer, having an intrinsic
viscosity NOT less than 0.73 and NOT more than 0.8 decalitres
per gram, complying with ASTM 4603, having an acetaldehyde (AA)
level LESS than 1 part per million
Op. 01.01.17
Dec. date 14.12.16
Substitutable goods produced in Australia in the ordinary course
of business by LyondellBasell Australia Pty Ltd, South Yarra, Vic. In transit provisions apply
3907.61.00 - TC 1663737
50
27.02.17
- TC 1663738
WATER FOUNTAINS, polyresin AND/OR fibreglass reinforced
polyresin, with or without ANY of the following:
(a) submersible pump;
(b) electric cable;
(c) fountain reservoir;
(d) tubing;
(e) transformer;
(f) metal frame;
(g) fountain spout;
(h) lights
Op. 26.03.10
Dec. date 11.06.10
- TC 1014992
WATER FOUNTAINS, polyresin AND/OR fibreglass reinforced
polyresin AND stone powder, with or without ANY of the following:
(a) submersible pump;
(b) electric cable;
(c) fountain reservoir;
(d) tubing;
(e) transformer;
(f) metal frame;
(g) fountain spout;
(h) lights
Op. 26.03.10
Dec. date 11.06.10
Substitutable goods produced in Australia in the ordinary course of business by Billmans Foundry Pty Ltd, Castlemaine
Vic. In transit provisions apply
50
06.03.17
Substitutable goods produced in Australia in the ordinary course of business by Billmans Foundry Pty Ltd, Castlemaine,
Vic. In transit provisions apply
6810.99.00 50
27.02.17
POLYETHYLENE TEREPHTHALATE, having BOTH of the following:
(a) intrinsic viscosity of NOT less than 0.925; (b) acetaldehyde (AA) level less than 1 part per million
Op. 01.01.17
Dec. date 14.12.16
Substitutable goods produced in Australia in the ordinary course
of business by LyondellBasell Australia Pty Ltd, South Yarra, Vic. In transit provisions apply
3926.40.00 50
06.03.17
- TC 1014989
11 Intention to Revoke TCOs not used in over 2 years
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Intention to Revoke TCOs not used in over 2 years
TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS
The Comptroller-General of Customs is satisfied that the TCOs listed in the table below are no longer required
because, in the 2 years preceding the day of this notice, they have not been quoted in an import declaration
to secure a concessional rate of duty.
From Thursday, 4 May 2017, it is intended to take action to revoke these Orders under subsection 269SD (1A) of
the Customs Act 1901. In accordance with subsection 269SG (2) of the Customs Act 1901, in transit provisions
shall apply. If revoked, the expected date of effect will be 3 May 2017.
Interested parties are invited to provide, by close of business, Wednesday 3 May 2017, written reasons why an
Order should NOT be revoked.
Please advise if any of the Orders listed below have been quoted on an import declaration.
If a request is made to retain an Order used for the granting of a Determination, please specify the
Determination and the linked Item number to enable mapping to the Order and its scope.
THE TABLE
______________________________________________________________________________________________________________
Tariff
Description
Concession Number
Classification
______________________________________________________________________________________________________________
3901.90.00
ETHYLENE BUTYL ACRYLATE COPOLYMER
Op. 12.01.06
3926.90.90
Dec. date 09.05.06
- TC 0602901
Dec. date 17.03.06
- TC 0601593
FURNACES, BLAST, comprising ALL of the following:
(a) telphers;
(b) conveyors;
(c) heat exchangers;
(d) refractories;
(e) drafters;
(f) launders;
(g) ladles;
(h) lead pumps;
(i) lead stirrers;
(j) pans;
(k) rotary furnace;
(l) cranes
Op. 08.02.06
8417.90.00
- TC 0601596
SILENCERS, INDUCTION FAN, WALKING BEAM FURNACE
Op. 29.12.05
8417.10.00
Dec. date 17.03.06
SACKS, moisture protection, comprising ALL of the following:
(a) circular or oval base;
(b) tape sealed seams;
(c) polyurethane coating;
(d) roll up closure
Op. 24.01.06
8414.90.90
- TC 0602198
PARTS, PICKLE LINE TANK, being ANY of the following:
(a) tank segments;
(b) covers;
(c) lids
Op. 29.12.05
4202.92.90
Dec. date 24.03.06
Dec. date 21.04.06
- TC 0603540
PARTS, WALKING BEAM FURNACE, being ANY of the following:
(a) thermic screens;
(b) cell supports;
(c) tank breathers
Op. 05.01.06
Dec. date 17.03.06
- TC 0601822
12 Intention to Revoke TCOs not used in over 2 years
Tariff
Classification
8419.50.90 Description
- TC 0603342
Dec. date 18.04.06
- TC 0603060
MILLS, ZINC, comprising ALL of the following:
(a) floatation tanks;
(b) handlers;
(c) crushers;
(d) electrical transmitters;
(e) water pumps;
(f) effluent treaters
Op. 08.02.06 8479.89.90 Dec. date 18.04.06
BRAZERS, ALUMINIUM AIR CONDITIONERS, comprising BOTH of the
following: (a) dual mass flow controllers;
(b) NOT less than three flame settings
Op. 30.01.06 8474.10.00 Concession Number
COOLERS, MOTOR, WATER TO AIR, having ALL of the following: (a) air flow rate greater than 600 m3/minute;
(b) maximum air temperature less than 40 degrees centigrade;
(c) cupronickel cooling tubes;
(d) aluminium fins;
(e) zinc cathodic protector;
(f) motor capacity greater than 7 000 kW
Op. 03.02.06 8468.20.90 Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Dec. date 24.07.06
- TC 0603534
PRODUCTION LINE, GROWING MEDIA, comprising ALL of the following:
(a) hoppers;
(b) rewinders;
(c) fillers;
(d) sealers;
(e) conveyors;
(f) handlers;
(g) palletisers
Op. 11.01.06 Dec. date 24.03.06
- TC 0602221
13 TCOs Revoked -
unused for over 2 years
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
TCOs Revoked – unused for over 2 years
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF THE COMPTROLLERGENERAL OF CUSTOMS
The Tariff Concession Orders listed in THE TABLE below have not been used for at least 2 years and have been
revoked under Section 269SD(1A). In transit provisions apply.
The intention to revoke these orders was notified in Gazette TC 17/10 dated 15 February 2017.
Contact: email [email protected].
THE TABLE
Description of Goods including the
Customs Tariff Classification
8205.59
NAILERS, magazine fed, operated by striking the nailer pin with
a mallet, capable of using staples or T-nails having a length
of 25 mm or greater
Op. 06.12.83
Dec. date 06.12.83
Schedule 4 Item Number Last Date of Effect
50
14.03.17
- TC 8341810
Revoked for 2 years non use. In transit provisions apply
8207.60
BROACHES, involute form, toothed length 762 mm or greater
Op. 07.02.84
Dec. date 07.02.84
- TC 8341894
50
14.03.17
Revoked for 2 years non use. In transit provisions apply
8207.90
HOBS, gear cutting, inserted blade type, having replaceable blade
sections
Op. 17.12.86
Dec. date 21.08.87
50
14.03.17
- TC 8636251
Revoked for 2 years non use. In transit provisions apply
8215.20.00 BARBECUE SETS, comprising BOTH the following:
(a) multi-purpose utensil having ALL the following functions: (i)
fish slicer;
(ii) plate scraper;
(iii) cutting edges;
(iv) meat tenderising prongs,
(b) metal bristled barbecue cleaning brush having a metal
plate scraper
Op. 26.07.93
Dec. date 29.10.93
50
14.03.17
- TC 9307158
Revoked for 2 years non use. In transit provisions apply
8305.90.00 PAPER CLIP, stainless steel, printed.
Op. 18.11.94
Dec. date 08.03.95
- TC 9409095
50
14.03.17
Revoked for 2 years non use. In transit provisions apply
8311.10
ELECTRODES, stainless steel, conforming to Specification
UNS S32750
Op. 25.07.91
Dec. date 18.12.91
50
14.03.17
- TC 9106876
Revoked for 2 years non use. In transit provisions apply
8704.10.00 TRUCKS, REAR DUMP, 24 TONNES OR GREATER PAYLOAD, articulated,
off-highway 6 X 6 drive with limited slip differential front and
rear axles, having ALL of the following:
(a) minimum body tipping angle of 67 degrees;
(b) minimum height (unloaded) of 3 300 mm;
(c) maximum height (unloaded) of 3 800 mm
Op. 16.04.96
Dec. date 16.08.96
Revoked for 2 years non use. In transit provisions apply
50
14.03.17
- TC 9605796
14 TCOs Revoked -
unused for over 2 years
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Description of Goods including the
Customs Tariff Classification
8708.50
AXLES, but NOT including parts OTHER THAN parts listed in THE
TABLE, having ALL of the following:
(a) crown wheel dia of EITHER of the following:
(i) NOT exceeding 420 mm;
(ii) 630 mm or greater;
(b) oil immersed brakes integrated into the axle beam OR
provision for direct coupling to a hydraulic drive motor;
(c) planetary drive reduction;
(d) total drive reduction ratio exceeding 10:1 THE TABLE (a) crown wheels and pinions having a crown wheel dia exceeding 300 mm;
(b) oil immersed brake discs
Op. 27.10.89
Dec. date 09.04.90
Schedule 4 Item Number Last Date of Effect
50
14.03.17
- TC 8908310
Revoked for 2 years non use. In transit provisions apply
9306.30
CARTRIDGES, blank, 6 mm calibre, length less than 10 mm
Op. 14.08.84
Dec. date 14.08.84
- TC 8434037
50
14.03.17
- TC 0614610
50
14.03.17
Revoked for 2 years non use. In transit provisions apply
9503.00.20 SOCKS, dolls, to fit sizes 3 to 10 cm foot length
Op. 01.01.07
Dec. date 27.11.06
Revoked for 2 years non use. In transit provisions apply
15 TCOs Revoked and Re-Issued - Transcription Error
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
TCOs Revoked and Re-Issued - Transcription Error
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1)
TARIFF CONCESSION ORDER REVOKED AND A NEW TARIFF CONCESSION ORDER MADE IN ACCORDANCE WITH 269SD(3) OF THE
CUSTOMS ACT.
Tariff Concession Order for the goods described in the following TABLE have been revoked and narrower Tariff
Concession Orders made in respect of the goods described below.
The operative date (Op.), decision date (Dec. date) and TC reference number follow the description of goods.
THE TABLE
Description of Goods including the
Customs Tariff Classification
Schedule 4 Item Number
Last Date of Effect
TCO REVOKED
8428.39.00
CONVEYING MACHINES, ORGANIC MATTER, self-propelled, including
ALL of the following:
(a) elevator, having ALL of the following:
(i) length NOT greater than 8.3 m;
(ii) width NOT greater than 4.6 m;
(iii) planetary gearbox rated at 7.5 kW;
(iv) scraper chains;
(v) scraper bars;
(vi) steel frame;
(b) kick back drum;
(c) auger;
(d) swivel belt conveyor, having ALL of the following:
(i) belt length not more than 7 m;
(ii) belt width not more than 1.1 m;
(iii) hydraulic cylinders;
(iv) electric motor;
(v) belt pulley;
(e) planetary wheel drives, diameter 1.1 m x 400 mm;
(f) steering wheels, diameter 580 mm x 240 mm;
(g) electric control box
Op. 29.11.16
Dec. date 15.03.17
50
28.11.16
- TC 1673818
TCO 1673818 revoked and re-issued as TCO 1735762 due to
transcription error
TCO REISSUED
8428.39.00
CONVEYING MACHINES, ORGANIC MATTER, self-propelled, including
ALL of the following:
(a) elevator, having ALL of the following:
(i) length NOT greater than 8.3 m;
(ii) width NOT greater than 4.6 m;
(iii) planetary gearbox rated NOT less than 7.5 kW;
(iv) scraper chains;
(v) scraper bars;
(vi) steel frame,
(b) kick back drum;
(c) auger;
(d) swivel belt conveyor, having ALL of the following:
(i) belt length NOT more than 7 m;
(ii) belt width NOT more than 1.1 m;
(iii) hydraulic cylinders;
(iv) electric motor;
(v) belt pulley,
(e) planetary wheel drives, having a diameter NOT less than
1.1 m and a thickness NOT less than 400 mm;
(f) steering wheels, having a diameter NOT less than 580 mm and
a thickness NOT less than 240 mm;
(g) electric control box
Op. 29.11.16
Dec. date 03.04.17
50
- TC 1735762
16 Comptroller-General of Customs Review of TCO Revocations
Commonwealth of Australia Gazette
No TC 17/17, Wednesday, 05 Apr 2017
Comptroller-General of Customs Review of TCO Revocations
CUSTOMS ACT 1901 - 269SH(10) – RESULT OF THE COMPTOLLER-GENERAL OF CUSTOMS REVIEW OF A REVOCATION DECISION
The Comptroller-General of Customs internal review results made on the Tariff Concession Order revocations for
goods described in the following TABLE have been finalised:
THE TABLE
Description of Goods including the
Customs Tariff Classification
Schedule 4 Item Number
Last Date of Effect
Review
Decision
TCO REVOKED
8309.90.00
CLOSURES, COMPOSITE CAN END, hermetically sealable,
having a diameter NOT less than 80mm
Op. 14.04.15
50
06.11.16
REVOKED
50
06.11.16
REVOKED
- TC 1519042
DIBP Decision : Revocation of TCO affirmed
TCO REVOKED
8309.90.00
CLOSURES, COMPOSITE CAN END, comprising ALL of the
following:
(a) outer ring;
(b) aluminium foil membrane;
(c) plug;
(d) diameter NOT less than 80mm
Op. 14.04.15
DIBP Decision : Revocation of TCO affirmed
- TC 1519043