LOCTITE®
LCT/2477
Thread Sealing
5452™ THREAD SEALANT
•Instant sealing hydraulic sealant for
compression flare fittings, NPT Hydraulic
return lines, ORB and JIC Fittings •NonFouling Compound - Does not contaminate
hydraulics •Extremely Fast Curing - Gains
over 50% strength within 10 minutes •Low
cured strength for easy disassembly (does not
heat age) •Excellent chemical and solvent
resistance •Works on new and used fittings
Part No. 1265769, 50 ml tube.
Part No.
Part
No 1265770,
1265770 250 ml tube.
tube
554™ THREAD SEALANT
Chemical Resistance — Refrigerant
Sealant.
Excellent solvent resistance on threaded
fittings and pipes
up to 3” in diameter.
Recommended for
refrigeration systems and
service with aggressive
chemicals.
Part No. 25882, 10 ml
tube.
Part No. 55441, 250 ml
bottle.
THREAD SEALANT w/ PTFE
Solvent Based.
A general purpose sealant with the added
lubricity of PTFE for metal pipes. Won’t shred
like tape and allows easy disassembly. Resists
common shop fluids.
Part No. 1527514, 1 pt. brush can.
NO MORE LEAKS™ PLASTIC PIPE
SEALANT
Solvent Based.
Seals plastic pipes and allows easy
disassembly. Specially formulated without the
added lubricity of PTFE to avoid typical cracks
when plastic joints are over tightened.
Part No. 1537780, 16 fl. oz. brush can.
Gasketing & Sealing
Gaskets are used to prevent fluid or gas leaks by forming impervious barriers. For successful gasketing, the seal must remain intact and leak-free over a prolonged period of time.
Therefore, the gasket must resist the fluid and/or gaseous medium being sealed or excluded, and withstand the operating temperatures and pressures to which it is subjected.
510™ GASKET
ELIMINATOR® FLANGE
SEALANT
Product withstands
temperatures to 204°C
and has excellent solvent
and chemical resistance.
Fills gaps up to 0.010”
(0.254 mm) and maintains
clamping loads for strong,
leakproof assemblies. Makes
or dresses gaskets in rigid
assemblies. Eliminates gasket
compression set.
Part No. 51031,
50 ml tube.
Part No. 51041,
250 ml tube.
515™ GASKET
ELIMINATOR® FLANGE
SEALANT
Makes flexible gaskets for
rigid machined flanges with
less than 0.050” gap. Flexes
when flanges move in service.
Part No. 51517, 6 ml tube.
Part No. 38625, 50 ml tube,
carded.
Part No. 51580, 300 ml
cartridge.
518™ GASKET ELIMINATOR® FLANGE
SEALANT
Forms a flexible, solvent-resistant seal that will not tear or
decay. Seals to 149°C and fills gaps to 0.050”. Can be used
on flexible metal assemblies, including aluminum surfaces.
Easy disassembly and cleaning. Ideal for on-the-spot and
emergency repairs, or when a conventional gasket is out of
stock.
Part No. 51817, 6 ml tube.
Part No. 38638, 50 ml tube, carded.
Part No. 51845, 300 ml cartridge.
New version is the same as above except no primer required;
oil tolerant curing without cleaning; upgraded thermal
performance.
Part No. 2096062, 6 ml tube.
Part No. 2096058, 50 ml tube, carded.
Part No. 2096061, 300 ml cartridge.
548™ QUICKSTIX™
GASKET ELIMINATOR®
FLANGE SEALANT
Patented semi-solid formula is
ideal for on-the-spot repairs or
when a conventional gasket is
out of stock. Can be applied
quickly and neatly on a variety
of metal surfaces, including
aluminum, and forms a
flexible, solvent-resistant seal.
Seals to 149°C and fills gaps
to 0.010”.
Part No. 39152, 18 g stick.
574™ FLANGE
SEALANT — FAST
CURE
•Fast curing/controlled
viscosity •Seals close fitting
joints between rigid metal
faces and flanges •Cures
when confined in the absence
of air •Resistance to low
temperatures •Typically used
as a form-in-place gasket for
gearbox and engine casings,
etc. •Thixotropic nature of
574™ reduces the migration
of liquid product after
application to the substrate
Part No. 24018, 50 ml tube.
Part No. 26338, 250 ml tube.
Sealants/Dressings for Existing Gaskets
534™ QUICKSTIX™ HITACK GASKET DRESSING
No mess, semi-solid formula offers
added control and ease of use.
Patented package is portable
and won’t leak or spill. Seals and
holds the heaviest gaskets during
assembly. Solvent-free and low
odour. Suitable to 149°C.
Part No. 39156, 19 g stick.
GASKET SEALANT 1
Reliable, paste-like gasket sealant,
dressing, and coating. Sets quickly
to a hard set and is recommended
for rigid, permanent assemblies. Use
to 204°C. Resistant to gasoline and
other solvents.
Part No. 30510, 1.5 oz. tube.
Part No. 30512, 7 oz. tube.
greggdistributors.ca
GASKET SEALANT 2
Reliable, paste-like gasket sealant,
dressing, and coating. Sets slowly
to a pliable film. Best suited
for non-rigid, vibrating
assemblies. Use to 204°C.
Resistant to gasoline and
other solvents.
Part No. 30515, 7 oz.
tube.
COPPER GASKET
ADHESIVE
Fast drying, metallic, copper sealant
helps dissipate heat, prevent
gasket burnout, and improve heat
transfer. Fills hot spots and surface
imperfections. Temperature range is
-45°C to 260°C. Resists shop fluids.
Part No. 30535, 9 oz. aerosol.
AVIATION GASKET
SEALANT
Resists common shop fluids. Eases
disassembly. Temperature resistant
up to 204°C.
Part No. 1522029, 1 pt. brush can.
Part No. 1525607, 16 fl. oz. bottle.
L13
Automotive Chemicals & Supplies
Rigid Assembly Gasketing Products