®
Paver Clean
TM
PREPARE
REMOVE
RESTORE
Paver Surfaces Before Sealing
Stains, Minerals, Rust and Fungus
See back for
instructions
Paver Color and Beauty
SRW Products: Providing All-Around Protection
Paver Clean™
A MUST-USE Product
for Sealer Preparation!
PW PAVER WASH
The Best Seal Starts With Paver WashTM
PW Paver Clean is a general-purpose paver wash. It is a mustuse product to prepare pavers for sealing. This multi-purpose
wash can tackle polyhaze, efflorescence and ground-in dirt.
Available in 1 & 5 gal. containers
Coverage: Up to 200 ft ²/gal*
Benefits
1
„„ Opens surface pores to accept sealer
„„ Restores original paver color
„„ Contains no muriatic acid or hydrochloric acid
User Tips
See full instructions on back page
2
See back
1. Wait 60–90 days for new pavers to cure before applying.
2. Spot treat rust, grease, or fungus before applying.
3. Prolonged contact of cleaner on metal or other surface may result in etching
or damage.
4. Saturate vegetation before and after application.
Cleanup & Storage
Clean sprayer and tools with soap and warm water. Keep from freezing. Store
container in a cool area with cap or lid firmly in place.
EF
3
Sealer Preparation
„„ Opens pores to accept sealer
„„ Restores paver color
„„ Removes residual chemicals
Cleans Surface
„„ Removes dirt and debris
„„ Tackles polyhaze
„„ Dissolves minerals & efflorescence
Easy to Use
„„ Easy 4-Step Process
„„ Use sprinkler can then rinse with water
„„ No need to dilute
EFFLORESCENCE
EF Paver Clean is a fast-acting product that dissolves
efflorescence (white mineral deposits that dull pavers).
Benefits
„„ Dissolves mineral deposits & restores paver color
„„ Prepares surface for sealer & rinses clean with water
„„ Contains no muriatic acid or hydrochloric acid
User Tips
Available in 1 & 5 gal. containers
Coverage: Up to 200 ft ²/gal*
See full instructions on back page
1. Wait 60–90 days for new pavers to cure before applying. See back
2. Spot treat rust, grease, or fungus before applying.
3. Prolonged contact of cleaner on metal or other surface may result in
etching or damage.
4. Saturate vegetation before and after application.
Cleanup & Storage
Clean sprayer and tools with soap and warm water. Keep from freezing. Store
container in a cool area with cap or lid firmly in place.
Before
*Coverage may vary depending on surface and application. **Not for use on sealed surfaces.
XY
XYLENE
Fast-acting solvent used to thin and dissolve
acrylic sealers. Used to aid in the clean-up of
tools and over-spray.
Available in 1 & 5 gal. containers
SS
After
Works Great on Graffiti & Carpet Adhesive!
SEALER STRIPPER
Industrial strength biodegradable sealer
stripper. Used to aid in removal of sealing and
curing compounds.
Available in 1 & 5 gal. containers
2015
NEW
Paver Clean™
PRODUCT
MC MOLD, MOSS & MILDEW
3
M3C Paver CleanTM is a concentrated formula that breaks down
mold, moss, mildew, lichen and algae deep-down at its source.
This fast-working, heavy-duty product works without pressure
washing, scrubbing or rinsing and is suitable for any outdoor hard
surface including pavers, concrete, brick, shingles, asphalt and
wood, for great-looking outdoor spaces all year round.
User Tips
Before
After
Available in 1qt. & 1 gal. containers
Coverage: Approx. 750–2200 ft ²/gal*
See full instructions on back page
See back
1. Follow mixing instructions for maximum effectiveness.
2. If accidentally sprayed onto vegetation, rinse with water.
3. For excessive staining, re-apply 1-2 months after initial treatment.
Do not apply more than 6 times per year.
Cleanup & Storage
Clean tools with soap and warm water. Keep from freezing.
Benefits
„„ Breaks down mold, moss,
mildew, lichen & algae
deep-down at its source
„„ Non-acidic, no-bleach
CD CLEANER & DEGREASER
CD Paver Clean is a concentrated spot treatment cleaner that
removes grease, oil and dirt from paver surfaces. This
fast-working, heavy-duty product dissolves stains and rinses
clean with water. Use on pavers, concrete, brick, masonry,
wetcast and colored/stamped concrete.
User Tips
See full instructions on back page
See back
Before
Available in 1qt. containers
Coverage: Spot Treatment*
Benefits
1. Do not use on sealed surfaces.
2. Test this product in a small discrete area before full application.
„„ Removes grease, oil & dirt
Clean tools with warm water. Keep from freezing.
„„ Heavy-duty spot treatment
Cleanup & Storage
RE
„„ Rinses clean with water
RUST ELIMINATOR
RE Paver Clean is a heavy-duty concentrated spot treatment that
removes rust caused by metal, hard water, high iron aggregate
and fertilizer granules. This fast-acting, heavy-duty product
dissolves rust stains and rinses clean with water. Use on pavers,
concrete, brick and masonry.
User Tips
See full instructions on back page
1.
2.
3.
4.
After
See back
Do not use on sealed surfaces.
Do not apply on wetcast.
Not recommended for poured (stamped/colored) concrete.
Test this product in a small discrete area before full application.
Cleanup & Storage
Clean tools with warm water. Keep from freezing.
*Coverage may vary depending on surface and application. **Not for use on sealed surfaces.
Before
Available in 1qt. containers
Coverage: Spot Treatment*
Benefits
„„ Removes rust and hard
water stains
„„ Rinses clean with water
„„ Fast-acting spot treatment
After
®
Get answers to our most commonly asked
questions at www.SRWproducts.com.
Call us toll-free at 800-752-9326 or
e-mail [email protected]
Instructions Made Easy!
SRW Paver Clean products feature this simple 4-step process to save you time and money.
See product label for full product details.
PW
1
PREP
2
WET
3
APPLY
4
RINSE
®
Paver
Clean™
EF
„„ Thoroughly sweep surface of
joint sand, dust, debris or loose
material.
„„ If needed, use SRW spot
cleaner(s) prior to PW Paver
Clean application.
CD Cleaner & Degreaser for oil
and grease stains
„„ Wet surface and surrounding
area (including vegetation)
thoroughly.
„„ Do not allow product to dry on
surface. Spray if needed to keep
area wet. A 2-person application
is recommended.
„„ Ready to use. Do not dilute.
„„ Apply with a sprinkler can.
„„ Scrub area firmly and
immediately with a stiff
bristle brush.
„„ For large areas, work in 200
sq. ft. sections.
„„ If working on an incline, start
at the highest point, working
in small sections. Scrub from
bottom up, pushing excess
PW over job.
„„ Immediately rinse surface
and surrounding areas
(including vegetation).
„„ Areas should be thoroughly
rinsed with clean water until
all traces of foam disappear.
„„ Repeat if necessary.
„„ Let dry.
„„ Wait 24 hours before
applying SRW Paver Seal™
products.
2
3
4
RE Rust Eliminator for rust and
mineral removal
M3C Mold, Moss & Mildew
Cleaner for mold, moss, mildew,
lichen and algae removal
MC
3
1
DILUTE
APPLY
WAIT
RE-APPLY
1week
„„ Dilute 1 part M3C Paver Clean
with 5 parts water into a garden
sprayer.
„„ Wind and rain will wash away
debris as it’s broken down.
„„ Spray onto dry surface and allow
solution to fully saturate area.
„„ If desired, use a stiff bristle brush
and hose to clear the area of
remaining debris one week after
application.
„„ To maintain a stain-free
outdoor space, re-apply
M3C Paver Clean as
needed, up to 6 times
per year.
2
3
4
„„ Do not apply if rain is forecasted
within 24 hours.
„„ Allow to air dry overnight.
CD
1
DILUTE
„„ Dilute 1 cup CD Paver Clean into
1 gallon of warm clean water.
APPLY
„„ Apply to surface and allow
solution to penetrate stain.
„„ For stubborn stains, do not dilute.
Use product at full strength.
RE
1
WET
„„ Wet surface and surrounding
area of stain. Do not apply
cleaner directly on dry surface.
„„ Do not allow product to dry on
surface, keep wet with hose.
2
SCRUB
„„ Using rubber gloves and proper
eye protection, generously pour
RE Paver Clean over stain.
SCRUB
„„ Scrub surface with a stiff
bristle brush.
RINSE
„„ Rinse with water.
„„ Repeat if necessary.
„„ Follow spot treatment
with SRW Paver Wash
prior to sealing.
3
RINSE
„„ Immediately and thoroughly
rinse area with water.
„„ Scrub with a stiff bristle brush
until dissolved.
| www.SRWproducts.com | 800-752-9326
4
REPEAT
„„ For stubborn stains, repeat
steps as necessary.
„„ Follow spot treatment
with SRW Paver Wash
prior to sealing.