Step2
Qun. & King Bed Assembly Instructions
N76010-57/N76020-57/N76030-57/N76015-57/N76025-57
/N76035-57/N76039-57Essex Manor Collection
Figure3
CD
Figure4
CD
Instructions:
Assembly Hardware
Figure3
1.Assembled bed frame
Figure4
1.Connect C & D together for lights.
A
Wood Screw
Φ8x1-1/4"
10
Φ=Diameter
Congratulations on your purchase.
Rest assured only the finest materials, skilled artisans and modern
engineering were used to carefully construct this exquisite piece
Index
Step1
F
I
G
F
H
I
Figure 1
G
J
K
A
H
J
K
Bed Parts
E
Figure 2
Post Finial
K
F
Post Finial
G
Post
H
Rail Only
N76030-57
N76035-57
N76039-57
I
Poster Headboard
N76010-57
N76015-57
J
Poster Footboard
N76020-57
N76025-57
K
Bed Slats Only (5 pcs set)
L
Support for Slats w/ Leveler
Instructions:
NOTE: Inspect all packing material for small parts,
which may have come loose during
shipment.Identify and compare all parts against
the parts list
list.
Figure 1
B
1. Place E+F (Post Finial) onto G (Metal Post)
2. Repeat for the other G (Post)
3. Place assembled E + F+G fit onto J (Poster Footboard) + I (Poster Headboard)
4. Slip H (Rail Only) hooks into I slot and press down firmly
5. Slip H hooks into J slot and press down firmly
6. Repeat #4 and #5 for the other H
California King Bed:Place both H in innermost slots
Eastern King Bed: Place both H in outermost slots
Fi ure 2
1. Fasten each L (Support for Slats w/ Leveler) to the bottom of slats .
2. Next place a K across the bed so it leans on the inside edge of the right and left H
3. Repeat #1 and #2 until all bed slats are positioned evenly
4. Secure each side of K by screwing two A(Wood Screw) into each K and H
5. Adjust leveler to desired height