SOLVET
Electric Motor Safety Solvent
PRODUCT INFORMATION SHEET
DESCRIPTION:
SOLVET is a premium hydrocarbon solvent for use in cleaning of electrical equipment and general components by spray
or wipe on techniques.
SOLVET provides excellent cleaning, fast evaporation, and will not leave a residue on surfaces.
SOLVET is used in mining and industrial areas.
FEATURES AND BENEFITS:
•
Excellent solvent power to remove a wide range of contaminants
•
Fast evaporating to allow further work to proceed
•
Leaves no residue to cause problems down the track
•
Non flammable
•
Excellent on electrical switchboards and other switch gear
•
Wide application in general industry as a wipe solvent
TECHNICAL INFORMATION:
Appearance
Odour
pH
Specific Gravity
Percentage Volatiles
Solubility in Water
Clear colorless liquid
Characteristic solvent
N/A
0.780 ± 0.005
100%
Not miscible
USE:
SOLVET should be used as supplied either by spray, brush on or dip techniques. Apply liberally to surface to flush all soils
away, then allow the part to evaporate to dryness. Application of forced air stream will dramatically reduce drying time.
SOLVET should be used in a well ventilated area to avoid any narcotic effect from inhalation of high vapor levels.
SAFETY:
First Aid
Eyes: If splashed in eyes flush with water for 15 minutes. Seek medical advice
Skin: Wash affected area with soap and water
Inhalation: if mists are inhaled, remove patient to fresh air. Seek medical advice
Swallowed: Do not induce vomiting, give milk or water to dilute. Seek medical advice.
For further detailed information refer to Material Safety Data Sheet
Free Call: 1800 800 248
URL: www.peerlessjal.com.au