H Y D R AU L I C U N I T S
Gas , diesel or electric units to power TAP and TLPC winches
TO CONTACT US :
PAILLARDET SA
1526 route des Portes de Tarentaise
73790 TOURS EN SAVOIE
Phone : 04.79.31.00.40
Fax : 04.79.89.60.80
Email : [email protected]
www.paillardet.com
GAS HYDRAULIC UNITS
CTH6/R
To power one TLPC or TAP winch
Inox frame
Vanguard 6.5 HP engine electric starter 12 VDC
Hydraulic cooler reservoir
Proportional distribution
Proportional remote control
Hydraulic flexible (6 meters length and anti pollution couplers)
Flow rate : 18 l./mm
Pressure : 135 bars
Dimensions (cm) : 56 X 38 x 55
Unladen weight : 42 kg (92 lbs)
Weight (working) : 52 kg (114 lbs)
CTH9/R and CTH9I/R (soundproofed)
To power one winch at altitude or in hard conditions (TLPC or
TAP type)
Galvanized steel frame
Vanguard 9 HP engine electric starter 12 VDC
Hydraulic cooler reservoir
Proportional distribution
Proportional remote control
Handling tyres and handles
Hydraulic flexible (6 meters length and anti pollution couplers)
Flow rate : 20 l./mm
Pressure : 170 bars
Dimensions (cm) : 60 X 56 x 87
Unladen weight : 72 kg (158 lbs)
Weight (working) : 86 kg (189 lbs)
CTH13//R and CTH13I/R (soundproofed)
To power 2 winches in parallel (TLPC or TAP type)
Galvanized steel frame
Vanguard 13 HP engine electric starter 12 VDC
Hydraulic cooler reservoir
Proportional distribution
Proportional remote control
Handling tyres and handles
Selection valve to chose the flow rate : 1 or 2 ways
Hydraulic flexible (6 meters length and anti pollution couplers)
Flow rate : 36 l./mm
Pressure : 135 bars
Dimensions (cm) : 60 X 56 x 87
Unladen weight : 75 kg (165 lbs)
Weight (working) : 90 kg (198 lbs)
DIESEL HYDRAULIC UNIT
CTHD6.5/R
To power one TLPC or TAP winch
Inox frame
Diesel 6.5 HP engine electric starter 12 VDC
Hydraulic cooler reservoir
Proportional distribution
Proportional remote control
Hydraulic flexible (6 meters length and anti pollution couplers)
Flow rate : 19 l./mm
Pressure : 135 bars
Dimensions(cm) : 56 X 38 x 55
Unladen weight : 60 kg (132 lbs)
Weight (working) : 72 kg (158 lbs)
ELECTRO HYDRAULIC UNITS
CTH13/DP/R and CTH13I/DP/R (soundproofed)
To power 2 independant winches (TLPC or TAP type)
Galvanized steel frame
Vanguard 13 HP engine electric starter 12 VDC
Hydraulic cooler reservoir
Proportional distribution
Proportional remote control
Handling tyres and handles
Hydraulic flexible (6 meters length and anti pollution couplers)
Flow rate : 2 outputs of 18 l./mm each
Pressure : 135 bars
Dimensions (cm) : 60 X 56 x 87
Unladen weight : 86 kg (189 lbs)
Weight (working) : 100 kg (220 lbs)
CEH4.5/R
Galvanized steel frame
Electric single phase engine 220 V
Power 3.7 Kw
Hydraulic cooler reservoir
Proportional distribution
Proportional remote control
Handling tyres and handles
Hydraulic flexible (6 meters length and anti pollution couplers)
Flow rate : 18 l./mm
Pressure : 135 bars
Dimensions(cm) : 60 X 56 x 87
Unladen weight : 75 kg (165 lbs)
Weight (working) : 90 kg (198 lbs)
CEH5.5/R
Same characteristics as CEH4.5/R with a 3–phases engine
220/380 V, 5.5 CH power
Dimensions (cm) : 60 X 56 x 87
Flow rate : 20 l / min
Unladen weight : 80 kg (176 lbs)
Weight (working) : 92 kg (202 lbs)
www.paillardet.com