TRUSS PLANT
FAX NUMBER 715-876-5565.
MIDWEST MANUFACTURINGʼS TRUSS PLANT IS ONE OF
THE LARGEST TRUSS PLANTS IN THE MIDWEST.
WE FEATURE:
IN HOUSE DESIGN AND ESTIMATING
PROFESSIONAL ENGINEERING
COMPUTER ASSISTED MANUFACTURING
QUALITY ASSURANCE INSPECTIONS
QUALITY WORKMANSHIP
QUALITY MATERIALS
BELOW ARE SOME EXAMPLES OF MANY TRUSSES AVAILABLE THROUGH
MIDWEST MANUFACTURING.
WOOD WEB
WOOD AND METAL WEB
FOR MORE INFORMATION ON TRUSSES, REFER TO THE TRUSS TRAINING MANUAL IN THIS CATALOG.
EFFECTIVE APRIL 1, 2007
FAX # 715-876-5565
SECTION B, PAGE 1
DESIGN SERVICES
FAX NUMBER 715-876-5565.
SEALED PRINTS
TRUSS PRINTS WHICH ARE
SEALED AND CERTIFIED BY A
PROFESSIONAL ENGINEER
ARE
AVAILABLE
UPON
REQUEST. IF THE TRUSS HAS
NOT BEEN ORDERED A SEALED
PRINT FEE IS REQUIRED*.
PLEASE INDICATE WHICH
STATE SEAL IS REQUIRED
WHEN ORDERING.
USE SEALED PRINT FEE
SKU #187-9984
*LAYOUT AND SEALED PRINT FEES ARE REFUNDABLE UPON PURCHASE
OF SPECIAL ORDER TRUSS PACKAGES. REFUND DOES NOT APPLY TO
TRUSSES AVAILABLE FOR PROMPT SHIPMENT.
SECTION B, PAGE 2
FAX # 715-876-5565
EFFECTIVE APRIL 1, 2007
ORDERING INFORMATION
FAX NUMBER 715-876-5565.
EACH SPECIAL ORDER CONTRACT MUST INCLUDE THE FOLLOWING:
JOBSITES:
1. SPECIAL ORDER CONTRACT NUMBER (S.O.C.#)
2. TRUSS TYPE (COMMON, END, SCISSORS)
3. PITCH (4/12, 5/12, 6/12)
4. ON CENTER SPACING (24”, 9ʼ)
5. OVERHANGS (12”, 24”)
6. LOADING (50#, 60#, 29#)
7. QUANTITIES FOR EACH TRUSS
8. GUEST SIGNATURE
9. DEPOSIT OR PAID IN FULL
ODD SPAN:
ODD PITCH:
CANTILEVERS:
SCISSORS:
BEARING
WALLS:
HEEL HEIGHTS:
ALL JOBSITES REQUIRE PAID IN FULL AND JOBSITE DIRECTIONS BEFORE
WE CAN BEGIN BUILDING THE TRUSSES.
ODD SPAN TRUSS QUOTE REQUESTS SHOULD BE FAXED TO THE
MIDWEST MANUFACTURING TRUSS PLANT. FAX #715-876-5565
ODD PITCH TRUSSES QUOTE REQUESTS SHOULD BE FAXED TO THE
MIDWEST MANUFACTURING TRUSS PLANT . FAX #715-876-5565
IF THERE IS A CANTILEVER CONDITION, PLEASE NOTE IF IT IS ON ONE SIDE
OR BOTH. GIVE SPAN OF OVERALL TRUSS AND CANTILEVER LENGTH.
BEARING WALL SIZE MUST BE GIVEN (2X4 OR 2X6).
INDICATE PLACEMENT OF INTERIOR BEARING WALLS AND BEARING WALL
SIZE.
SPECIFY IF HEEL HEIGHTS ARE SUPPOSED TO MATCH WHEN ORDERING
MORE THAN ONE TYPE OF TRUSS.
CHANGES:
WHEN CHANGING SPECIFICATIONS ON A TRUSS, A REVISED SPECIAL
ORDER CONTRACT NOTING THE CHANGE MUST BE FAXED.
CUSTOM BUILD:
TRUSSES BUILT PER INDIVIDUAL ORDER, SUBJECT TO CURRENT PRODUCTION TIME.
PROMPT SHIP:
PROMPT SHIP TRUSSES ARE IN STOCK READY TO SHIP AT THE TRUSS
PLANT, AVAILABLE FOR SHIPMENT ON THE NEXT DELIVERY TO THE
STORE.
FOR MORE INFORMATION ON TRUSSES, REFER TO TRUSS TRAINING MANUAL IN THIS CATALOG.
EFFECTIVE APRIL 1, 2007
FAX # 715-876-5565
SECTION B, PAGE 3
ORDERING EXAMPLES
FAX NUMBER 715-876-5565.
1. 34ʼ SCISSORS, 4/12 OVER 2/12, 2ʼ OVERHANGS, 2ʼ ON CENTER, 60# TOTAL LOAD,
2X6 BEARING WALL, STANDARD 4” HEEL
2. 24ʼ COMMON, 4/12, 2ʼ ON CENTER, 3ʼ OVERHANGS, 30-10-10# LOADING
3. 18ʼ DROPPED END, 3/12, DROPPED FROM STANDARD 4” HEEL FOR 2X4 LADDER
SET
4. 28ʼ GIRDER TRUSS, 6/12, 20ʼ TIE-IN-SPAN, HEEL TO MATCH PROMPT SHIP COMMON
PLEASE SPECIFY WHAT GIRDER TRUSS WILL CARRY AND LOCATION OF ANY CONCENTRATED LOAD.
5. 23ʼ-1 3/4”, 4X2 BCB-FLOOR, 18” DEEP, 19.2” ON CENTER, 55# LOAD, 1ʼ CANT ONE
SIDE.
6. 21ʼ AGRI REGULAR, 3/12, 9ʼ ON CENTER, 24-4-1 # LOAD.
AGRI TRUSSES ARE NOT BUILT WITH OVERHANGS
TYPICAL DESIGN LOADS:
RESIDENTIAL
ROOF: 20-10-10=40#, 30-10-10=50#, 40-10-10=60#
FLOOR: 40-10-5=55#
AGRICULTURAL
20-4-1=25#, 24-4-1=29#, 24-4-5=33#, 32-4-1=37#
32-4-5=41#, 30-4-1=35#, 40-4-1=45#
COMMERCIAL
ROOF: 30-4-1=35#, 30-4-5=39#, 40-4-1=45#, 40-4-5=49#
FLOOR: 40-10-5=55#, 50-10-5=65#, 80-10-5=95#,
100-10-5=115#, 125-10-5=140#
SECTION B, PAGE 4
FAX # 715-876-5565
EFFECTIVE APRIL 1, 2007
FOR MORE INFORMATION ON TRUSSES, REFER TO TRUSS TRAINING MANUAL IN THIS CATALOG.
EFFECTIVE APRIL 1, 2007
FAX # 715-876-5565
SECTION B, PAGE 5
DROPPED END
For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.
DROPPED END FRAME
Dropped ends & ladder sets are used to obtain a gable overhang, most often 2ʼ or more.
Using a ladder set requires the use of a dropped end frame. The dropped end frame will
be dropped (lowered) to the bottom edge of the lookouts on the ladder set. The ladder
set will sit on top of the dropped end frame so it sits flush with the first common truss.
The ladder will be nailed to the first common truss.
Dropped ends listed are constructed to accept a 2x4 ladder set,
attaching to a standard 4” heel common.
SPAN
10ʼ
12ʼ
14ʼ
16ʼ
18ʼ
20ʼ ^
22ʼ ^
24ʼ ^
26ʼ ^
28ʼ ^
30ʼ ^
32ʼ ^
34ʼ
36ʼ
38ʼ
40ʼ
4/12
TYPE
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
^ IN STOCK FOR PROMPT SHIPMENT
5/12
SKU#
188-5059
188-5237
188-5415
188-5596
188-5774
188-5952
188-6126
188-6298
188-6484
188-6658
188-6838
188-7031
188-7196
188-7358
188-7510
188-7675
SPAN
10ʼ
12ʼ
14ʼ
16ʼ
18ʼ
20ʼ ^
22ʼ ^
24ʼ ^
26ʼ ^
28ʼ ^
30ʼ ^
32ʼ ^
TYPE
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
SKU#
188-5101
188-5282
188-5460
188-5648
188-5826
188-6016
188-6168
188-6346
188-6524
188-6702
188-6883
188-7086
SPAN
10ʼ
12ʼ
14ʼ
16ʼ
18ʼ
20ʼ ^
22ʼ ^
24ʼ ^
26ʼ ^
28ʼ ^
30ʼ ^
32ʼ ^
34ʼ
6/12
TYPE
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
DROPPED END
SKU#
188-5172
188-5350
188-5538
188-5716
188-5897
188-6074
188-6252
188-6430
188-6618
188-6799
188-6935
188-7138
188-7293
PLEASE GIVE THE FOLLOWING INFORMATION
WHEN REQUESTING A DROPPED END FRAME
OR LADDER SET
HEEL HEIGHT OF COMMON TRUSS FROM
WHICH THE DROPPED END IS TO BE DROPPED
THE SIZE OF THE LADDER SET TO BE USED;
2X4 OR 2X6
SECTION B, PAGE 6
FOR ACCURATE QUOTING OF DROPPED ENDS
INCLUDE THE NUMBER OF COMMON TRUSSES
TO BE ORDERED
FAX # 715-876-5565
EFFECTIVE APRIL 1, 2007
LADDER SET
LADDER SET
For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.
Dropped ends & ladder sets are used to obtain a rake overhang up to 2ʼ. A longer rake overhang
can be obtained, but MM Truss must be contacted for specifics. Using a ladder set requires the
use of a dropped end frame. The dropped end frame will be dropped (lowered) to the bottom
edge of the lookouts on the ladder set. The ladder set will sit on top of the dropped end frame so it
sits flush with the first common truss. The ladder will be nailed to the first common truss.
LADDER SET BUILT FOR 24” OVERHANG
2X4 LADDER SET
$4.52/PER LINEAL FT OF TRUSS SPAN
2X6 LADDER SET
$5.75/PER LINEAL FT OF TRUSS SPAN
PRICE OF LADDER SET DOES
NOT INCLUDE COMMON
TRUSS OR DROPPED
END FRAME.
DROPPED END FRAME
LADDER SET SITS ON TOP OF
DROPPED GABLE END
COMMON TRUSS
LADDER SET
LOOKOUT
2X4 or 2x6
LADDER SET IS
NAILED TO FACE OF
FIRST COMMON TRUSS.
DROPPED END
FRAMES
DROPPED END FRAMES DO
NOT HAVE OVERHANGS.
PLEASE GIVE THE FOLLOWING INFORMATION WHEN REQUESTING
A LADDER SET
THE SPAN & PITCH OF COMMON TRUSSES WITH WHICH THE
LADDER SET WILL BE USED.
THE SIZE OF THE LADDER SET TO BE USED; 2X4 OR 2X6
THE EAVE & RAKE OVERHANG DESIRED
ALL ITEMS LISTED ABOVE ARE SHOWN AT LIST PRICE.
IN ORDER TO ACHIEVE STORE COST MULTIPLY THE LIST PRICE BY .FH
EFFECTIVE APRIL 1, 2007
FAX # 715-876-5565
SECTION B, PAGE 7
SCISSORS
4/2/12, 5/2.5/12, & 6/3/12 SCISSORS
For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.
(SNOW LOAD)
LLTC=LIVE LOAD TOP CHORD
DLTC=DEAD LOAD TOP CHORD
(ROOFING MATERIAL)
LLBC=LIVE LOAD BOTTOM CHORD
(ATTIC STORAGE)
DLBC=DEAD LOAD BOTTOM CHORD (CEILING MATERIAL)
TOTAL
4/2/12
SPAN
TYPE
10ʼ
SCISSOR
SCISSOR
12ʼ
14ʼ
SCISSOR
16ʼ
SCISSOR
18ʼ
SCISSOR
20ʼ
*SCISSOR
22ʼ ^ *SCISSOR
24ʼ ^ *SCISSOR 4” BEARING
24ʼ ^ SCISSOR 6” BEARING
26ʼ ^ *SCISSOR 4” BEARING
26ʼ ^ SCISSOR 6” BEARING
28ʼ ^ *SCISSOR 4” BEARING
28ʼ ^ SCISSOR 6” BEARING
30ʼ ^
*SCISSOR
SKU#
188-4500
188-4514
188-4528
188-4542
188-4556
188-4570
188-4584
188-4598
188-4599
188-4610
188-4611
188-4622
188-4623
188-4634
SPAN
10ʼ
12ʼ
14ʼ
16ʼ
18ʼ
20ʼ
22ʼ ^
24ʼ ^
26ʼ ^
28ʼ ^
30ʼ ^
=
=
=
=
5/2.5/12
TYPE
SCISSOR
SCISSOR
SCISSOR
SCISSOR
SCISSOR
*SCISSOR
*SCISSOR
*SCISSOR
*SCISSOR
*SCISSOR
*SCISSOR
^ IN STOCK FOR PROMPT SHIPMENT
* 4” BEARING
USP HANGER RECOMMENDATION
DESCRIPTIONS
SCISSORS
(TWO PER TRUSS)
SCISSORS CLIP FOR 2X4 B.W.
SCISSORS CLIP FOR 2X6 B.W.
SKU#
227-1280
227-1293
NOTE: HANGERS ARE NOT INCLUDED (AVAILABLE IN HARDWARE DEPT.)
SECTION B, PAGE 8
FAX # 715-876-5565
2ʼ O.C. SPACING
2ʼ OVERHANGS
42
10
0
10
62# PSF
SKU#
188-4504
188-4518
188-4532
188-4546
188-4560
188-4574
188-4588
188-4602
188-4614
188-4626
188-4638
SPAN
10ʼ
12ʼ
14ʼ
16ʼ
18ʼ
20ʼ
22ʼ ^
24ʼ ^
26ʼ ^
28ʼ ^
30ʼ ^
6/3/12
TYPE
SCISSOR
SCISSOR
SCISSOR
SCISSOR
SCISSOR
*SCISSOR
*SCISSOR
*SCISSOR
*SCISSOR
*SCISSOR
*SCISSOR
SKU#
188-4508
188-4522
188-4536
188-4550
188-4564
188-4578
188-4592
188-4606
188-4618
188-4630
188-4642
BEARING
WALL SIZE
3 1/2” seat cut to match
bearing wall
3 1/2” bearing wall width
THE BEARING WALL SIZE IS REQUIRED
BEFORE SCISSOR TRUSS ORDERS CAN
BE PROCESSED.
EFFECTIVE APRIL 1, 2007
ROOM IN ATTIC
GABLE & GAMBREL ROOM-IN-ATTIC
For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.
(SNOW LOAD)
LLTC=LIVE LOAD TOP CHORD
DLTC=DEAD LOAD TOP CHORD
(ROOFING MATERIAL)
LLBC=LIVE LOAD BOTTOM CHORD
(ATTIC STORAGE)
DLBC=DEAD LOAD BOTTOM CHORD (CEILING MATERIAL)
TOTAL
Warning: Stairway opening
may require 2-ply girders and
hand framing. Please ask guest
how they plan to enter their attic.
Stairwell along the stud wall end
of building requires one 2-ply
girder; towards the center of
room requires two 2-ply girders.
=
=
=
=
2ʼ O.C. SPACING
54
10
40#
0
10
tom
74# PSF
Live Load Applied to BotChord in Room Area Only
NOTE: ROOM-IN-ATTIC TRUSSES ARE USUALLY NOT BUILT
WITH OVERHANGS DUE TO TRANSPORTATION PURPOSES.
SELECTED ROOM-IN-ATTIC TRUSSES MAY HAVE ON OVERHANG, MUST CHECK WITH MM TRUSS AT TIME OF PURCHASE.
OVERHANGS MAY BE HANDFRAMED, ADDED IN THE
DESIGN-IT CENTER OR OVERHANG JACKS PURCHASED
(SEE SECTION D, PAGE 3).
ROOM-IN-ATTIC TRUSSES REQUIRE JOB SITE DELIVERY.
JOB SITE DELIVERIES REQUIRE JOB SITE DIRECTIONS
AND MUST BE PAID IN FULL.
slope varies with room size
^
^
^ IN STOCK FOR PROMPT SHIPMENT
EFFECTIVE APRIL 1, 2007
SPREAD WEB STORAGE TRUSSES CAN BE USED WHEN STORAGE SPACE IS NEEDED. THE BOTTOM CHORD IS DESIGNED
TO CARRY A 25 LB. PER SQ. FT. LIVE LOAD. FOR INFORMATION SEE SECTION B, PAGE 10.
FAX # 715-876-5565
SECTION B, PAGE 9
SPREAD WEB
4/12, 5/12, 6/12 SPREAD WEB STORAGE
For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.
LLTC=LIVE LOAD TOP CHORD
(SNOW LOAD)
DLTC=DEAD LOAD TOP CHORD
(ROOFING MATERIAL)
LLBC=LIVE LOAD BOTTOM CHORD
(ATTIC STORAGE)
DLBC=DEAD LOAD BOTTOM CHORD (CEILING MATERIAL)
TOTAL
=
=
=
=
42 2ʼ OC SPACING; 2ʼ OVERHANGS
10
2X3 & 2X4 WEBS;
25
2X4 TOP &
10
87# PSF
2X6 BOTTOM CHORDS
SPREAD WEB STORAGE TRUSSES CAN BE USED WHEN STORAGE SPACE IS DESIRED
WITHIN THE TRUSS. THE ENTIRE BOTTOM CHORD OF A SPREAD WEB STORAGE
TRUSS IS LOADED WITH 25 PSF LIVE LOAD. THE CENTER WEBS OF THE TRUSS ARE
SPREAD APART TO ALLOW THE LARGEST POSSIBLE OPENING IN THE CENTER OF THE
TRUSS. (SEE ILLUSTRATION BELOW)
NOTE: THE SPREAD WEB STORAGE TRUSSES LISTED BELOW HAVE STD 4” HEELS,
AND WILL MATCH UP TO RESIDENTIAL PROMPT SHIP COMMONS, GABLE ENDS, AND
SCISSORS.
H
W
ACTUAL WEB PATTERN MAY VARY DIMENSIONS OF CENTER OPENINGS ARE APPROXIMATE
SPAN
20ʼ
22ʼ
24ʼ
26ʼ
28ʼ
30ʼ
4/12
Center Opening (H,W)
2ʼ 6”x9ʼ 9”
3ʼ 0”x11ʼ 0”
3ʼ 4”x12ʼ 0”
3ʼ 8”x11ʼ 0”
4ʼ 0”x10ʼ 8”
5ʼ 0”x10ʼ 8”
^ IN STOCK FOR PROMPT SHIPMENT
5/12
SKU#
188-9615
188-9673
188-9738
188-9796
188-9851
188-9916
USP HANGER RECOMMENDATION
DESCRIPTIONS
COMMON (TWO PER TRUSS)
TRUSS TIE FOR SINGLE PLATE
TRUSS TIE FOR DOUBLE PLATE
SECTION B, PAGE 10
SPAN Center Opening (H,W)
20ʼ ^ 3ʼ 6”x10ʼ 0”
22ʼ ^ 3ʼ 11”x11ʼ 9”
24ʼ ^ 4ʼ 4”x12ʼ 0”
26ʼ ^ 4ʼ 9”x12ʼ 4”
28ʼ ^ 5ʼ 2”x12ʼ 6”
30ʼ ^ 5ʼ 7”x12ʼ 6”
SKU#
227-3288
227-1646
SKU#
188-9631
188-9699
188-9754
188-9819
188-9877
188-9932
6/12
SPAN Center Opening (H,W)
20ʼ ^ 4ʼ 4”x11ʼ 4”
22ʼ ^ 4ʼ 10”x12ʼ 4”
24ʼ ^ 5ʼ 4”x13ʼ 0”
26ʼ ^ 5ʼ 10”x13ʼ 0”
28ʼ ^ 6ʼ 4”x13ʼ 0”
30ʼ ^ 6ʼ 10”x13ʼ 0”
SKU#
188-9657
188-9712
188-9770
188-9835
188-9893
188-9958
Warning: Stairway opening may require
2-ply girders and hand framing. Please ask
guest how they plan to enter their attic.
Stairwell along the stud wall end of building
requires one 2-ply girder; towards the center
of room requires two 2-ply girders.
FAX # 715-876-5565
EFFECTIVE APRIL 1, 2007
VALLEY SETS
4/12 5/12, & 6/12 VALLEY SET
For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.
Valley Sets are used to form the ridge line and framing between the main roof and secondary
roof structures. Valley sets can also be used for decorative gables, and dormers over porches
and entrances. Valley trusses may be set directly on top of the trusses on the main roof.
Sheathing is not necessary under the valley trusses.
VALLEY SET INCLUDES
SPAN
1 TRUSS EACH: 4ʼ, 8ʼ & 12ʼ
16ʼ
1 TRUSS EACH: 2ʼ, 6ʼ, 10ʼ, & 14ʼ
18ʼ
1 TRUSS EACH: 4ʼ, 8ʼ, 12ʼ, & 16ʼ
20ʼ
1 TRUSS EACH: 2ʼ, 6ʼ, 10ʼ, 14ʼ, & 18ʼ
22ʼ
1 TRUSS EACH: 4ʼ, 8ʼ, 12ʼ, 16ʼ, & 20ʼ
24ʼ
1 TRUSS EACH: 2ʼ, 6ʼ, 10ʼ, 14ʼ, 18ʼ, & 22ʼ
26ʼ
1 TRUSS EACH: 4ʼ, 8ʼ, 12ʼ, 16ʼ, 20ʼ, & 24ʼ
28ʼ
1 TRUSS EACH: 2ʼ, 6ʼ, 10ʼ, 14ʼ, 18ʼ, 22ʼ, & 26ʼ 30ʼ
1 TRUSS EACH: 4ʼ, 8ʼ, 12ʼ, 16ʼ, 20ʼ, 24ʼ, & 28ʼ 32ʼ
4/12
188-8548
188-8603
188-8661
188-8726
188-8784
188-8849
188-8904
188-8962
188-9026
5/12
188-8551
188-8616
188-8674
188-8739
188-8797
188-8852
188-8917
188-8975
188-9039
6/12
188-8580
188-8645
188-8700
188-8768
188-8823
188-8881
188-8946
188-9000
188-9068
TIE-IN-SPAN IS THE SPAN OF THE
TRUSSES TO BE CARRIED BY THE
GIRDER TRUSS. THIS INFORMATION
IS NEEDED BEFORE ANY QUOTE OR
ORDER CAN BE PROCESSED.
GIRDER TRUSSES ARE USED TO ELIMINATE THE NEED FOR AN INTERIOR LOAD BEARING WALL. THE
GIRDER IS USED TO SUPPORT ONE END OF THE MAIN ROOF TRUSS AT THE INTERIOR SECTION OF
THE TWO ROOFS. THE MAIN ROOF TRUSSES THAT TIE INTO THE GIRDER ARE CARRIED ON THE BOTTOM CHORD BY JOIST HANGERS. THE HANGER REQUIRED AND THE SIZE OF THE GIRDER DEPEND
ON THE NUMBER AND SPAN OF TRUSSES TO BE CARRIED.
EFFECTIVE APRIL 1, 2007
FAX # 715-876-5565
SECTION B, PAGE 11
HIP SETS
4/12, 5/12, 6/12 HIP SET
For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.
LLTC=LIVE LOAD TOP CHORD
(SNOW LOAD)
DLTC=DEAD LOAD TOP CHORD
(ROOFING MATERIAL)
LLBC=LIVE LOAD BOTTOM CHORD
(ATTIC STORAGE)
DLBC=DEAD LOAD BOTTOM CHORD (CEILING MATERIAL)
TOTAL
=
=
=
=
HIP
END DIMINISHCORNER
GIRDER JACKS ING HIP GIRDERS JACKS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
2
3
2
3
4
5
6
7
8
9
0
0
0
0
0
0
0
1
1
2
2
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
* Does not require Hip Blocking Frame
42
10
0
10
62# PSF
4
4
4
8
8
12
12
12
12
12
12
12
12
SPAN
*8ʼ
*10ʼ
12ʼ
*14ʼ
16ʼ
*18ʼ
20ʼ
22ʼ
24ʼ
26ʼ
28ʼ
30ʼ
32ʼ
2ʼ O.C. SPACING
2ʼ OVERHANGS
4/12
188-7824
188-7853
188-7882
188-7918
188-7947
188-7976
188-8001
188-8069
^ 188-8124
^ 188-8182
^ 188-8247
^ 188-8302
188-8360
PITCH
5/12
188-7837
188-7866
188-7895
188-7921
188-7950
188-7989
188-8014
188-8072
188-8137
188-8195
188-8250
188-8315
188-8373
6/12
188-7840
188-7879
188-7905
188-7934
188-7963
188-7992
188-8043
188-8108
^188-8166
^188-8221
^188-8289
^188-8331
188-8399
^ PROMPT SHIP
HIP BLOCKING FRAME
HIP SET DOES NOT
INCLUDE FIRST COMMON
DIMINISHING HIP
(DROPPED)
PLAN VIEW
CORNER
GIRDER
NOTE:
HIP BLOCKING FRAME (INCLUDED) ELIMINATES THE NEED FOR RIDGE BLOCKING
CORNER JACKS
END JACKS
QUANTITY OF HANGERS NEEDED
DESCRIPTION:
SKU #
CORNER GIRDER-END JACK (HJC)
228-1717
CORNER JACK (SKL-SKR OR MP3)
228-1911
END JACK (JL-24)
227-1060
TRUSS TIE FOR SINGLE OR DOUBLE PLATE 227-1646
†1 HANGER PER 8ʼ JACK LESS 2 FOR HJC CONNECTION
QTY
2
12
†
2/TRUSS
NOTE: HANGERS ARE NOT INCLUDED. THEY ARE AVAILABLE THROUGH THE HARDWARE DEPARTMENT.
SECTION B, PAGE 12
FAX # 715-876-5565
EFFECTIVE APRIL 1, 2007
TRUSS PLANT
4/12 HEAVY-COMBO PROMPT SHIP POST FRAME TRUSSES
For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.
THE PROMPT SHIP TRUSSES SHOWN BELOW ARE DESIGNED TO CARRY A 40#
LOAD AT 9ʼ O.C. WITH 90 MPH WIND LOAD RATING. THEY CAN BE USED AT
DIFFERENT SPACINGS TO ACHIEVE ADDITIONAL LOADING. USE THE CHART
BELOW AS A GUIDE FOR OTHER LOADS.
IN STOCK FOR PROMPT SHIPMENT
LLTC=LIVE LOAD TOP CHORD
(SNOW LOAD)
DLTC=DEAD LOAD TOP CHORD
(ROOFING MATERIAL)
LLBC=LIVE LOAD BOTTOM CHORD
(ATTIC STORAGE)
DLBC=DEAD LOAD BOTTOM CHORD (CEILING MATERIAL)
TC LL
50
50
50
50
50
45
45
42
42
35
35
30
30
24
*
*
*
*
*
*
*
*
SPAN
20ʼ
24ʼ
26ʼ
28ʼ
30ʼ
32ʼ
TC DL
4
5
4
5
4
5
4
5
4
5
4
5
4
5
BC DL
1
5
1
5
1
5
1
5
1
5
1
5
1
5
PITCH
4/12
4/12
4/12
4/12
4/12
4/12
TRUSS
SKU#
187-6738
187-6770
187-6783
187-6796
187-6806
187-6819
4/12
4/12
187-6835
187-6851
TOTAL LOAD
55
60
55
60
55
55
50
52
47
45
40
40
35
34
SPACING
4ʼ-0”
4ʼ-0”
5ʼ-0”
5ʼ-0”
6ʼ-0”
6ʼ-0”
7ʼ-0”
7ʼ-0”
8ʼ-0”
8ʼ-0”
9ʼ-0”
9ʼ-0”
10ʼ-0”
10ʼ-0”
END FRAME HEEL
SKU#
HEIGHT
187-7407
7-7/8”
187-7423
7-7/8”
187-7449
7-7/8”
187-7232
7-7/8”
187-7465
7-7/8”
187-7371
7-7/8”
TRUSSES OVER 36ʼ REQUIRE JOBSITE DELIVERY
36ʼ
40ʼ
187-7494
187-7614
7-7/8”
7-7/8”
LATERAL BRACING REQUIRED ON BOTTOM CHORD 10ʼ O.C.
*
90 MPH WIND RATED
MAXIMUM TOP CHORD PURLIN SPACING 16” O.C.
EFFECTIVE APRIL 1, 2007
FAX # 715-876-5565
SECTION B, PAGE 13
TRUSS PLANT
TALL WALL REQUEST FORM
NAME: ______________________________________
ADDRESS: __________________________________
CITY: _____________ COUNTY: _______________
STATE: ___________ ZIP CODE: ______________
Daytime: (_____)______-____________
Home:
(_____)______-____________
DATE: _________________________________
TEAM MEMBER: ______________________
STORE LOCATION: ___________________
STORE NUMBER: _____________________
PROJECT NAME: _____________________
PLEASE PROVIDE
1.
2.
3.
4.
THE FOLLOWING INFORMATION:
Please include this form with a fax of the wall plan.
Please specify all rough opening dimensions if not indicated on the plans.
Please include truss layout for roof loading on the wall.
Show ridge beam reactions and size, if possible.
ADDITIONAL INFORMATION:
End Wall Dimensions
Wall Width (A): _____________
Eave Height (B): _____________
Peak Height (C): _____________
Truss Information
Truss Bearing (D): ___________
Truss Heel (E): _____________
Roof Pitch (F):
_____________
Truss Spacing: _____________
Overhang Information
Overhang Dimension: 12", 18", 24", ____
Material for Overhang: 2x4, 2x6, 2x8, ____
F
12
E
C
B
D
A
Surrounding Terrain
Special Notes:
Inside Developed City
Wooded Area
Open Terrain
Lakefront
SECTION B, PAGE 14
FAX # 715-876-5565
Surrounded by other
houses
EFFECTIVE APRIL 1, 2007