ASSEMBLY INSTRUCTIONS
Pre-Lit Tree
SPECIAL FEATURES:
Pre-strung with UL-listed light-locked light strings.
Equipped with seasonal light strings.
Flame-resistant, natural looking tree.
Please read all instructions prior to assembly.
Please save these instructions.
This pre-lit tree includes a UL-listed decorative lighting string. The combination
of the light string and tree has not been evaluated by UL.
(1)
ASSEMBLY INSTRUCTIONS
Pre-Lit Tree
Model No. 6070-1068-400L
This product is for indoor use only.
1.Before you start to assemble your tree, choose a location near a wall outlet. Make sure the tree stand is placed on a level surface.
2. Insert the bottom section of tree body ( C) into the tree stand, tighten the three thumb screws evenly and make sure the trunk stays straight.
Insert the middle section of tree body ( B) into the bottom of tree body ( C), then insert the top section of tree body ( A) into the middle section of tree body (B).
THUMB SCREWS
STAND
A
C
B
B
C
C
A
B
C
3. Open all branches.
4. When shaping the branches, start with tips farthest from the pole.
One tip to the right, one tip to the left, and one tip at the center of the main stem.
D
5. Connect the plug (D) of string with the end cord ( E) of string.
6. Insert the plug (F) of string into the electrical cord (see illustration).
E
Then insert the plug of electrical cord to the wall outlet.
F
7. After you press the the foot switch of the electrical cord, your entire tree should be lit.
FOOT SWITCH
If some bulbs do not light, search for any loose plugs,
loose or missing bulbs that may have caused the problem.
THE
ELECTRICAL
CORD
TO WALL OUTLET
(2)