I
TENDER SPECIFICATION OF ROPE POLYESTER HAWSERLAID
CIR: 3" (D|A-24MM)
BN Requirements
Name of ltem
Rope Polyester Hawser Laid
Quantity
General Properties:
Materialto be Used
Polyester.
To be used in BN Ships.
Z Twist (Right hand lay).
Circumference
Weight per Coil
Minimum Breaking Load (MBL)
To be mentioned.
Golor of the
Length per Coil
Country of Origin
To be mentioned
Country of Manufacture
To be mentioned
ffi
Manufacturer's postal address, fax,
web address and e mail is to be
mentioned.
Polyester identification mark to be
held ( 01 Blue varn in one strand
Cataloque: Original catalogue to be submitted with the offer
Sample:
15 (Fifteen) meter sample are to be submitted with the offer.
Sample should be of the exact size/dia. weaving and quality of the offered
rope. Acceptable sample will be approved by the NHQ.
ldentification Marks
to.
.,;
t/
18.
Manufacturer's authenticitv certificate is to be submitted with the offer.
During supply of goods manufacturer has to provide factory quality test
certificate (original) and MBL (Minimum Breaking Load) test certificate
(original) for each coil of rope which has to be sealed and attached with
the coil
Del
iverv Req
20"
21
ui
rements:
Packaqins:
Commercial packaging.
Marking: Each package
a. I Name of item
is to be marked as follows:
Contract No. and date
Supplier's name and address
Deliverv
Schedule
Delivery schedule for the procurement quantity is
mentioned below
Consignee
NSD Ctg
lnstallment
Delivery time from the date
of signing the contract
3300 mtr.
I
23
Warrantv: At least 12 month warranty
the date of acceptance by the BN. lf any item found defective during the
warranty period the supplier will repair/replace the same within 30 days
any cost.
lnspection and
rest.
clNS wiil inspect
th@
Quality of Material
Quan
Out look
Measurement
lnspection bv Consionee. At the time of delivery consignee will inspect
the following:
P
Marki
Quantit
Warrantv Certificate
Endorsement of CINS as to inspection and acceptance.
Other lnformation
26
Evaluation of render offer(s). Tender
basis of followino:
Quality of material
g
offersffi
Weavin
Measurements.
Other
ameters qiven in the
ification
laboratory (as required) to examine compatibility
material of s
ier's sample with tender s
I Price
.
query within 03 days of raising the query.
Payment: Payment will be made local curren@
acceptance of product by Bangladesh Navy.
Liquidated Damaqe (LD).
regulation.
LD for late delivery will apply as
validitv of offer. Tender offer must be valid
opening tender.
per
fo@
W
nir
tlqlu
ilYonzzeu xosYrufu
Commander BN
Deputy Director
Directorate of Naval Stores
Naval Headquarters
I
TENDER SPECIFICATION OF ROPE POLYESTER HAWSERLAID
CIR:-3.5" (DlA-28MM)
BN Requirements
Supplier's
Response/Offer
Name of ltem
Quantity
Rope Polyester Hawser Laid
Polyester.
5.
I Strand
B
lDia
To be used in BN Ships.
03 (Three)
Z Twist (Right hand lay)
i 6 -Tllay
' 7 Circumference
9-
Weight per Coil
Minimum Breaking Load (MBL)
'10
To be mentioned.
12.25 Tons.
11
Color of the ro
Length per Coil
13
Country of Origin
To be mentioned.
14.
Country of Manufacture
To be mentioned.
i5
Man ufactu
i12
rer's Add ress
Manufacturer's postal address, fax,
web address and e mail is to be
mentioned.
ldentification Marks
Cataloque:
17
-b
Polyester identification mark
to
be
held ( 01 Blue
in one strand
Original catalogue to be submitted with the offer
Sample:
15 (Fifteen) meter sample are to be submitted with the offer.
Sample should be of the exact size/dia, weaving and quality of the offered
rope. Acceptable sample will be approved by the NHQ
Certificates:
a. I Manufacturer's authenti
certificate is to be submitted with the offer.
During supply of goods manufacturer has to provide factory quality test
certificate (original) and MBL (Minimum Breaking Load) test certificate
(original) for each coil of rope which has to be sealed and attached with
the coil.
I
l
I
i
i
Deliverv Requirements:
,0 -iqr"!esj!s.
Commercial packaging.
21. i tUarfincr: fach p-ackage ffi
a.
b
I Name of item
Contract No. and date
nee's address
er's name and address
Deliverv Schedule
Delivery schedule for the procurement quantity is
mentioned below.
Gonsignee
NSD Ctg
lnstallment
Delivery time from the date
of sionino the contract
Quantity
90 days
4+oo mtr
7
t
23.
24.
to be given bY-the suPPlier from
the dai" of acceptance by the BN. lf any item found defective during the
warranty period itre suppiier will repair/replace the same within 30 days
any cost.
lnspection and Test. clNS will inspect the item as to tne lollowlng:
a.
b
c
d
25
Quality of Material
Quantity
Out look
Measurement
lnspection bv Consiqnee. At the time ot dellvery conslgnee
wrrr rrrspeur
the following:
Packaoinq
a.
b
Marking
c
Quantity
\A/arronlrr
f'arf ifinate
d.
e.
f nOorsement of CINS as to inspection and acceptance'
Othet lnfo rmation
offers will be evaluated on the
26
basis of following:
a.
Qualitv of material
Out look
b.
Weaving
c.
Measurements.
d.
e
Alhar
naramafarc
f
Material test
nirrcn in thc snecification
(as required) to examine compatibility of
liar'c camnla rnrifh tcndcr snecification.
in laborator),
Price
zz
Supptier's
Service
ouerv within 03 davs of raisinq the query.
'
Supplter must reply Io puyer s
rency as Per existing rules after
28
-ceptance of product by Bangladesh Navy.
(LD). LD for late
dellvery wlll appry
29
Liquidated Damaqe
30
ValiditV of Offer. Tender offer must be Valld tor
1UU OayS
as
Pel
lrom Ine 1;are
ur
opening tender.
[4 MOAZZEM HO
It
N
Commander BN
Deputy Director
Directorate of Naval Stores
Jllaval Headquarters