PERMATEX®
PER/3140
Gasket Makers
BLUE RTV GASKET MAKER
•Sensor-safe •An all-purpose RTV silicone
gasket maker •Resists auto and shop fluids
•Waterproof seal resists cracking, shrinking
and migrating •Use for sealing, bonding,
insulating, caulking,
making gaskets and
coating pre-cut gaskets
•The original “blue” gasket
maker •Temperature
range: -54°C to 260°C
intermittent
Applications: Valve
covers, oil pans, timing
covers, water pumps,
thermostat housings,
transmission pans.
Part No.
Size
6BR
80 ml tube
6C
300 ml cartridge
ANAEROBIC GASKET MAKER
•OEM specified •Designed for superior
performance on aluminum flanges •Use for
gasketing close fitting rigid-machined flanges
with gaps up to 0.25 mm (0.01”) unprimed;
1.27 mm (0.05”) with primer •Eliminates the
need for pre-formed, pre-cut, paper gaskets
•Superior resistance to powertrain fluids
including engine oil, transmission fluid, gear
lube, coolants, gasoline
•High reliability sealing
•Long term durability
•Resists temperatures up
to 150°C
Applications: Water
pumps, thermostat
housings, transmission
pans, transmission case
covers, transaxle casings,
o-ring replacement.
ANAEROBIC GASKET MAKER
•Flexible gasket sealant for flanges
that move in service •Use for
gasketing close fitting rigid-machined
flanges with gaps of 0.25 mm (0.01”)
unprimed; 1.27 mm (0.05”) with
primer •Eliminates the need for
pre-formed, pre-cut, paper, rubber or
cork gaskets •Superior resistance
to powertrain fluids including engine
oil, transmission fluid, gear lube,
coolants, gasoline •High reliability
sealing •Long term durability
•Temperature range -51°C to 150°C
Applications: Water pumps,
thermostat housings,
transmission pans,
transmission case covers,
transaxle casings, o-ring
replacement.
Part No.
Size
51813
50 ml tube
51845 300 ml cartridge
Part No.
Size
51531
50 ml tube
51580 300 ml cartridge
HIGH TEMPERATURE ANAEROBIC
FLANGE SEALANT
•Use for gasketing close fitting rigid-machined
flanges with gaps up to 0.25 mm (0.01”)
unprimed; 0.5 mm (0.02”) with primer
•Eliminates the need for pre-formed, pre-cut,
paper, rubber or cork gaskets •Superior
resistance to powertrain fluids including engine
oil, transmission fluid, gear lube, coolants,
gasoline •High reliability sealing •Long term
durability •Withstands temperatures to 204°C
Applications: Water pumps, thermostat
housings, transmission pans, transmission
case covers, transaxle casings, o-ring
replacement.
Part No.
51031
Size
50 ml tube
Gasket Sealants
Automotive Chemicals & Supplies
As new engine designs require more advanced gasket makers, today's under hood requirements create a need for superior sealant technologies. When a chemical gasket is not an option,
Permatex® offers a wide range of gasket sealants suitable for applications on both import and domestic vehicles of any model year or performance caliber.
FORM-A-GASKET® NO. 1 SEALANT
•Designed for dressing/sealing cut gaskets on
rigid flanges •Thick, fast drying, hardening
formula •For application
where permanent
assembly is desired
•Resists common auto
and shop fluids including
fuels •Temperature range:
-54°C to 200°C •USA
Mil-S-45180 D, Type I
Applications: Dressing
cork, rubber, paper,
and composite gaskets,
sealing hose connections.
Part No.
1BR
Size
80 ml tube
FORM-A-GASKET® NO. 2 SEALANT
•Designed for dressing/sealing cut gaskets
on flexible/stamped parts •Thick, slow drying,
non-hardening formula
•Allows for easy disassembly
if required •Resists
common auto and shop
fluids including fuels •More
flexible than Form-A-Gasket®
No.1 to perform better in
thermal cycling applications
•Temperature range: -54°C
to 200°C •USA Mil-S-45180
D, Type II
Applications: Dressing cork,
rubber and paper gaskets.
Part No.
2BR
Size
80 ml tube
GASKET REMOVER
•Removes gaskets and gasket residue from
any type of metal housing
•Also removes chemical formin-place gaskets •Penetrates
and cleans intricate shapes
•Will not run, even on
vertical surfaces •Eliminates
excessive scraping and
potential damage to flanged
surfaces •Saves time and
labour
Applications: Use to assist in
removing any gasket.
INDIAN HEAD® GASKET SHELLAC
COMPOUND
•Original quality formula •Hard setting,
economical sealant •Seals all common
gasketing materials in low
temperature and low pressure
applications •Temperature
range: -54°C to 175°C •Resists
diesel fuels and most shop
fluids
Applications: Hose
connections, paper and
cardboard gaskets.
Part No.
4MA
Part No.
5J-1
Size
340 g aerosol
Size
50 ml bottle
PermaShield™ FUEL RESISTANT GASKET DRESSING & FLANGE
SEALANT
Specially formulated for superior fluid resistance, this polyester urethane based gasketing
compound withstands extreme temperature changes without hardening. Its non-setting,
non-hardening character remains tacky even with rapid changes in temperature, enabling
repeated assembly and disassembly of parts. Suitable as either a gasket maker or
dressing. PermaShield seals surface imperfections between metal parts and is ideal in
high performance applications. With an operating temperature range of -50°C to 260°C,
this compound resists common engine fluids, including oil, gasoline, ethanol, water, and
antifreeze and prevents contamination from moisture and dirt.
Part No.
Size
85420
L2
AVIATION FORM-A-GASKET® NO. 3
SEALANT
•Slow-drying, non-hardening sealant •Ideal
for close fitting machined surface •Approved
for use in aviation as well as automotive
applications •Helps
seal cut gaskets
•Resists gasoline, oil,
anti-freeze and axle
fluids •Temperature
range: -54°C to 200°C
•USA Mil-S-45180 D,
Type III
Applications: Seals
any paper, rubber,
cork or composite gasket,
close-fitting machined
surfaces, hoses.
Part No.
3H
80017
Size
118 ml brush-top can
473 ml brush-top can
HIGH TACK™ SPRAY-A-GASKET®
SEALANT
•Fast drying all-purpose spray adhesive/
sealant •Tacky paste for holding cut gaskets in
place during assembly •Helps seal cut gaskets
•Resists gasoline, oil, anti-freeze, kerosene,
propane, butane and axle fluids •Temperature
range: -54°C to 260°C
Applications: Seals any rubber,
cork, paper or composite gasket;
also for holding sanding disks
and for use as an all-purpose
adhesive.
Part No.
Size
99MA
255 g aerosol
SUPER HIGH TACK™ GASKET
SEALANT
•Fast drying all-purpose adhesive/sealant
•Tacky paste for holding cut gaskets in place
during assembly •Helps seal cut gaskets
•Resists gasoline, oil, anti-freeze, kerosene,
propane, butane and
axle fluids •Temperature
range: -54°C to 260°C
Applications: Seals
any rubber, cork, paper
or composite gasket;
also works on hose
connections; good as a
general purpose contact
adhesive.
Part No.
Size
98H
118 ml brush-top can
98D
473 ml brush-top can
COPPER SPRAY-A-GASKET® HIGHTEMP SEALANT
•Fast drying, metallic copper spray adhesive/
sealant •Prevents gasket burnout and
improves heat transfer •Fills minor surface
irregularities •Fills hot spots and surface
imperfections •Resists all types of automotive
fluids, especially gasoline
•Temperature range -46°C to
260°C
Applications: Cylinder head
gaskets, carburetor gaskets,
exhaust manifold gaskets
and other high temperature
applications.
Part No.
Size
101MA 255 g aerosol
2 oz. tube
We Are Canadian. (And Proud of it!)