United Fibers
UltraTouch Cyclone Insulation Blower
Follow these steps to return tool to rentable condition:
Tool Rental Center
Support Guideline
Slide rear panel up and out of machine
5
6
7
8
Blow any foreign materials and debris out of
sprockets and chain area
NOTE: All above actions must occur when the machine is
unplugged! Blower intended for UltraTouch product only,
we do not recommend for use with any other material.
Note: Upon return immediately inspect airlock rotor
for damage caused by placing objects in machine.
Additionally, ensure both blowing hoses and coupler was
also returned.
1
2
3
4
Remove rear cover by removing single screw
holding back panel
Lubricate chain (lightly)
Replace rear cover and screw
Inspect power cord for damage
Ensure both hose sections and coupler were
returned
Spray lubricate both wheels on the machine
For TRC Assistance please contact
United Fibers at 480.726.0001.