White conveyor belts
for food products
Rubber
PVC
FIGUM
FIPLAST
FIGUM - White Rubber Conveyor Belts for Food Products
Utilization
Construction
Figum conveyor belts are used for the transportation
of bulk food products in applications such as sugar
works, dock side facilities, silos and food processing
factories.
The standard construction for Figum is that of a multiply conveyor belt. The belt is composed of several plies
of fabric with white rubber inter-plies separating them
and with white rubber covers.
The Resistance varies from 250N/mm to 1250N/mm
We also offer a special mono ply belt with a single fabric
ply impregnated with white rubber and covered with
white Nitrile rubber. This act's as the "solid woven"
option and is often utilized with bucket elevator conveyor
systems where the high resistance of the belt is beneficial
to the long running of the elevator system.
Different cover
qualities
The choice of cover is determined by the type of
application:
- The nature of the product being transported:
- Greasy foods, vegetable, animal.
Example : arachides, meats
- Non Greasy foods
- Food standards requirements:
Conformity to CEN, American FDA standard, water
absorption, etc.
- Safety requirements:
(Fire resistant and Anti-static)
Fire resistance ISO 1340/DIN 22103, Anti static ISO
284/DIN22104 are the most common
We offer 2 types of cover as standard plus covers for
special applications on request.
BL
FGS
No
Yes
Food
-
North American FDA
Fire Resistance
-
ISO 340 / DIN 22103 (grade S)
Anti-static
-
ISO 284 / DIN 22104
Cover
SBR
NBR with fire retardant agents
Abrasion
Good
Medium
-30º to +80º
-25ºC to +80ºC
Resistance to grease
Working Temperature
Denomination
of the product
FIGUM (MP) 400/3 - 800 - 4 + 2 - FGS
FIGUM (MP):
White Rubber multiply belt for food
400:
Resistance of the belt 400 N/mm
3:
Number of plies
800:
Width of the belt in mm
4 + 2:
Cover thickness in mm
FGS:
Type of cover
NBRprotégé - Food standard FDA
Fire Resistant ISO 340 / DIN 22103 - Quality K
Anti-static ISO284/DIN 22104
FIPLAST - Solid-woven white PVC belts for food products
Utilization
Fiplast conveyor belts are used for the transportation of
bulk food products in applications such as sugar works,
dock side facilities, silos and food processing factories,
etc.
Construction
The standard construction for a Fiplast conveyor belt is
that of a Monoply belt and is denominated Fiplast (SW)
We also offer a special multi ply construction for a Fiplast
conveyor belt and is denominated as Fiplast (MP).
The resistance varies from 250/N/mm to 1250 N/mm
Different cover
qualities
The choice of cover is determined by:
- The nature of the product being transported
- Greasy foods, vegetable, animal.
Exemple: arachides, meats
- Non Greasy foods
- Food standards requirements:
Conformity to CEN, American FDA standard, water
absorption, etc.
- Safety requirements
(Fire resistance and antistatic)
ISO I340/DIN 22103, anti-static ISO 284/DIN22104
are the most used
The cover FGS has the properties shown in the table
below and is the standard cover supplied. Other covers
are possible depending on the load being carried.
FGS
Denomination
of the product
Resistance to grease
Yes
Food
American FDA Norm
Fire resistance
ISO 340 / DIN 22103 (grade S)
Antistatic
ISO 284 / DIN 22104
Cover Rubber
PVC protected
Abrasion
Good
Working temperature
-15ºC to +70ºC
FIPLAST (SW) 400/1 - 800 - 4 + 2 - FGS
FIPLAST (SW):
400:
1:
800:
4 + 2:
FGS:
White Rubber multiply belt for food
Resistance of the belt 400 N/mm
Number of plies
Width of the belt in mm
Cover thickness in mm
Type of cover
NBR protégé - Food standard FDA
Fire Resistant ISO 340 / DIN 22103 - Quality K
Antistatic ISO 284 / DIN 22104
DEPREAUX reserves the right
This document is provided for information
to change parts of this
only and is not legally binding.
document without prior notice.
COBRA EUROPE
12 rue Henry Guy
70303 LUXEUIL LES BAINS
France
Tel: +33 3 84 93 89 30
Fax. +33 3 84 40 44 92
www.cobra-cs.com