Publisher Information Notes
Subject:
EZ2/EZ3 PROGRAM VER. 3.11/3.07/3.05
Application: EZ2/EZ3
Upgrade Information
Document No:
22788
Summary:
EZ2 and EZ3 series programs Ver. 3.05 and Ver. 3.07 had been developed to fix the
bugs described in this document (pages 4-6). Program Ver. 3.11 is an update to program
Ver. 3.07 with the same bug correction routines in addition to features supporting the
new Job Separator IV:NIII option.
EZ2/3 series program Ver. 3.11 supersedes Ver. 3.05/3.07. Hence, machines with
Ver. 2.03 should be upgraded with Ver. 3.11. Connecting the new Job Separator IV:
NIII option to EZ2/3 series requires program Ver. 3.11.
In “Major changes with Ver. 3.05” on page 3, Print Pressure Adjustment (Test Mode
1248) does not apply to EZ2 series machines since they do not have a Pressure Control
Mechanism.
This document combines EZ2/EZ3 series program versions 3.05, 3.07 and 3.11 update
information. Please update EZ2/3 with their respective programs Ver. 3.11.
ISSUE DATE: 9/16/2010
SUPERSEDES:
DATED:
PAGE: 1 of 6
Copyright: 2010 RISO, Inc. All products are trademarks of their respective companies. Specifications subject to change without notice.
RISO Inc. Technical Operations
US.RISO.COM
Publisher Information Notes
EZ2/EZ3 PROGRAM VER. 3.11/3.07/3.05
Subject:
Application: EZ2/EZ3
Upgrade Information
Document No:
EZ series TECHNICAL BULLETIN
Brief:
22788
With the release of Job Separator IV:NII, the programs for EZ2/3 series Mecha-Ctrl-PCBs
have been updated to:
EZ2 - CLLM/Ver. 3.11
EZ3 - CLNM/Ver. 3.11
In the new type Job Separator (IV:NIII), the sorting tape can be inserted between sets/
groups without pausing the print job. The program version of the printer must be
Ver. 3.11 or higher. For further setup details, refer to Job Separator IV:NIII Installation
Procedure.
Note:
When using previous Job Separator (IV:NII), you’ll need to stop printing in order to
insert the sorting tape between sets/groups.
Program compatibility:
If the program used in the Mecha-Ctrl-PCB is V3.0 or higher, the NeoROSA-PCB is required
to have Ver. 3.00 or higher. (At present, NeoROSA-PCB program is at: Ver. 3.00).
Mech-PCB program
V2.03 or earlier
V3.00 or later
+
+
NeoROSA-PCB program
V2.03 or earlier
V3.00 or later
Major Changes with Mecha-Ctrl-PCB program V3.11:
EZ2
EZ3
Description
Added new Test Mode for Job Separator IV:NIII (New type)
ST* Operation Mode Selection:
You can select from 2 modes when using Job Separator IV:NIII
V
V
1247
Setting
Range: 0 to 1
[0]: Stop mode (Default)
[1]: Non-Stop mode
*When using RISO Job Separator IV:NII or
earlier types, the printer will only work with
“Stop mode” without regard to the selection.
Enter TM 9874 to get to TM1247.
*ST: Sorter
ISSUE DATE: 9/16/2010
SUPERSEDES:
DATED:
PAGE: 2 of 6
Copyright: 2010 RISO, Inc. All products are trademarks of their respective companies. Specifications subject to change without notice.
RISO Inc. Technical Operations
US.RISO.COM
Publisher Information Notes
EZ2/EZ3 PROGRAM VER. 3.11/3.07/3.05
Subject:
Application: EZ2/EZ3
EZ2
Upgrade Information
EZ3
22788
Description
ST Interval Action Selection
When selecting Non-stop mode (TM 1247 to ”1”), Interval
Action Selection (TM 3172) depends on tape insertion condition. At speeds 4 & 5, tape may hit ejected paper, hence
selecting Interval mode (TM 3172 to “1”) causes the drum to
rotate with no paper fed/ejected within a certain time interval.
This mode synchronizes printing with sorting tape insertion.
Enter TM9874 to get to TMs 3172-3178
3172
V
Document No:
V
Setting
Range: 0 to 1
[0]: Non-Interval mode
[1]: Interval mode (Default)
*When you select Non-Interval mode, check
the machine movement and adjust tape cut
timing if needed.
ST Tape Cut Timing Adj.
When the tape is not inserted properly in Non-Stop mode on
Job Separator IV:NIII, Tape Cut Timing can be adjusted.
Consult Job Separator IV:NIII Installation Instructions.
3173 - 3178
Setting
Range: -200 to +200 (-200ms to +200ms)
Step: 10 (10ms)
Default: 0
Serial Number Applications for Mecha-Ctrl-PCB withProgram V3.11:
EZ220U
78500290
EZ230U
79780590
EZ390U
79750991
ISSUE DATE: 9/16/2010
SUPERSEDES:
DATED:
PAGE: 3 of 6
Copyright: 2010 RISO, Inc. All products are trademarks of their respective companies. Specifications subject to change without notice.
RISO Inc. Technical Operations
US.RISO.COM
Publisher Information Notes
EZ2/EZ3 PROGRAM VER. 3.11/3.07/3.05
Subject:
Application: EZ2/EZ3
Upgrade Information
22788
Document No:
Program:
EZ2- CLLM/V3.07/3.05 for MECHA-PCB; CLLJ/V3.00 for NeoROSA-PCB.
EZ3- CLNM/V3.07/3.05 for MECHA-PCB; CLNJ/V3.00 for NeoROSA-PCB.
Program compatibility:
For MECHA-PCB with a program V3.00 or higher, the NeoROSA-PCB program is required to be
V3.00 or higher.
MECHA-PCB
V2.03 or earlier
V3.00 or higher
NeoROSA-PCB
V2.03 or earlier
V3.00 or higher
Major changes with V3.07 (MECHA-PCB):
EZ2
EZ3
Description
User Management Mode bug fixed:
Even though the Wake Up key is pressed during printing to log off, printing
does not stop. This bug has been fixed.
<Reference> Setting Up User Management
V
V
Auto Idling Time Setting bug fixed:
V
V
Even though the Auto Idling Time is set to 12 hours in Custom Setting Mode,
Auto Idlingis performed in 6 hours. This bug has been fixed.
<Reference> Auto Idling Time Setting:
Auto Idling Time can be set to: “None”, “6 hours” or “12 hours” in
Custom Setting Mode.
ISSUE DATE: 9/16/2010
SUPERSEDES:
DATED:
PAGE: 4 of 6
Copyright: 2010 RISO, Inc. All products are trademarks of their respective companies. Specifications subject to change without notice.
RISO Inc. Technical Operations
US.RISO.COM
Publisher Information Notes
EZ2/EZ3 PROGRAM VER. 3.11/3.07/3.05
Subject:
Application: EZ2/EZ3
Upgrade Information
Document No:
22788
Major changes with V3.05 ( MECHA-PCB):
EZ2 EZ3
Description
Paper Sensor Automatic Adjustment bug fixed:
V
V
When performing Test Mode 705 (Paper Sensor Automatic Adjustment), paper
may not feed properly. The adjustment may fail and error message is displayed.
This bug has been fixed.
<Reference> Paper Sensor Adjustment.
When Paper Sensor is replaced, make sure you activate Test Mode 705 for
adjustment. Detailed procedure is within the “Second Paper Feed” section of
the Technical Manual.
Added new Test Mode 1248: Print Pressure Adjustment for light image
problem:
The light image problem may occur if the machine were left un-operational for
a certain period of time. Refreshing ink inside the drum can remedy the light
image problem.
Print Pressure Adjustment in Test Mode:
* No title display of Test Mode on User Panel
---
V
TM #1248
Setting range: -930 to +999
0: Default
* Minus(-) is to decrease print pressure
* Plus(+) is to increase print pressure
Setting
This mode is intended for the service technician and
not for the end user.
Within this mode, Test Mode 87 (Paper feed test)
and 888 (Print Drum Ink Drainage) ought to be
performed as below:
Procedure for refreshing ink inside a print drum:
1- Enter Factory Test Mode 9874.
2- Enter Test Mode 1248 (Print Pressure Adjustment) and enter ”+999”.
3- with an original placed, make a master. (Use an original with a large print
area to drain ink fast).
4- Enter Test Mode 888 (Print Drum Ink Drainage).
5- After draining ink, return the value of Test Mode 1248 to ”0”.
6- Enter Test Mode 887 (Print Drum Inking Action).
ISSUE DATE: 9/16/2010
SUPERSEDES:
DATED:
PAGE: 5 of 6
Copyright: 2010 RISO, Inc. All products are trademarks of their respective companies. Specifications subject to change without notice.
RISO Inc. Technical Operations
US.RISO.COM
Publisher Information Notes
EZ2/EZ3 PROGRAM VER. 3.11/3.07/3.05
Subject:
Application: EZ2/EZ3
Upgrade Information
Document No:
22788
Serial Number Applications for program V3.07 (MECHA-PCB):
EZ220U
78500144
EZ230U
79780571
EZ390U
79750989
Serial Number Applications for program V3.05 (MECHA-PCB):
EZ220U
78500134
EZ230U
79780571
EZ390U
79750989
Serial Number Applications for program V3.00 (NeoROSA-PCB):
S-4892
RISO PC I/F USB
S-4892 C RISO PC I/F USB C
ISSUE DATE: 9/16/2010
SUPERSEDES:
10040031
10040031
DATED:
PAGE: 6 of 6
Copyright: 2010 RISO, Inc. All products are trademarks of their respective companies. Specifications subject to change without notice.
RISO Inc. Technical Operations
US.RISO.COM