PRODUCT DATA SHEET SPHERON® SO carbon black GENERAL DESCRIPTION The SPHERON® carbon black series have been specially developed by Cabot’s Industrial Products business as part of Cabot’s ongoing commitment to address market needs and promote solutions for future product design and processing challenges. SPHERON® SO carbon black conforms to ASTM N550 carbon black target values and has high cleanliness and soft pellets for improved dispersion. PERFORMANCE FEATURES SPHERON SO carbon black is especially developed for extruded rubber applications such as automotive weather stripping, hoses and profiles. SPHERON SOA carbon black exhibits rubber reinforcement properties similar to those of ASTM N550 carbon black, but imparts fewer visible imperfections on the surfaces of extruded rubber parts. The improved cleanliness of SPHERON SO carbon black can also contribute to a longer screen life (fewer screen changes) and less wear on extruder barrel, screw and die from abrasion compared to conventional ASTM carbon black products. SPHERON SO carbon black is well-suited for industrial rubber applications which require good extrusion characteristics and low hysteresis with more reinforcement than ASTM N700 and N600 type carbon black products. TYPICAL APPLICATIONS • Automotive weather stripping and door seals • Extruded hoses and profiles • Anti-vibration and other molded rubber parts SPHERON® SO carbon black TECHNICAL DATA SPHERON SO carbon black exhibits rubber reinforcement and processing properties similar to those of ASTM N550 carbon black, but imparts fewer visible imperfections on the surfaces of extruded rubber parts. Test Formulation: 100 phr EPDM, 70 phr Paraffinic Oil, 15 phr Whiting, Sulphur cure vulcanization system SPHERON® SO Loading (phr) ASTM N550 125 125 74 74 73 73 13.3 14.0 100% Modulus, MPa 4.9 5.1 300% Modulus, MPa 12.1 13.2 Elongation at Break, % 349 336 PROCESSING PROPERTIES Mooney Viscosity ML (1+4) at 100°C, (M.U.) PHYSICAL PROPERTIES Hardness Shore A Tensile Properties Tensile Strength, MPa Extruded Tape defect counts ASTM N550 Tape defect counts 2,000 Dispersion on 266 cm² of extruded EPDM tape surface SPHERON® SO 1,600 1,200 800 400 0 100-150 m 150-200 m > 200 m Tape defect size classes, (m) NORTH AMERICA SOUTH AMERICA EMEA* Cabot Corporation 1095 Windward Ridge Parkway Suite 200 Alpharetta, GA 30005 USA TEL +800 472 4889 Cabot Brasil Industria e Comércio Ltda. Rua do Paraiso 148-5th floor Sao Paulo – SP, Brazil Paraiso CEP.: 04103-000 TEL +55 11 2144 6400 CUSTOMER SERVICE 0800 195959 Cabot EMEA Business Service Centre SIA Cabot Latvia 101 Mukusalas Street Riga, LV-1004 Latvia TEL +371 67050700 *Europe, Middle East and Africa CHINA Cabot China Ltd. 558 Shuangbai Road Minghang District Shanghai 201108 China TEL +86 21 5175 8800 ASIA PACIFIC NORTH Cabot Japan K.K. Sumitomo Shiba-Daimon Bldg. 3F 2-5-5 Shiba Daimon, Minato-ku Tokyo 105-0012 Japan TEL +81 3 3431 1770 ASIA PACIFIC SOUTH PT. Cabot Indonesia Talavera Office Park Jl. Letjen TB Simatupang Kav 22-26, Cilandak Jakarta 12430 Indonesia TEL +62 21 27584100 This information is provided as a convenience and for informational purposes only. No guarantee or warranty as to this information, or any product to which it relates, is given or implied. This information may contain inaccuracies, errors or omissions and CABOT DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AS TO (i) SUCH INFORMATION, (ii) ANY PRODUCT OR (iii) INTELLECTUAL PROPERTY INFRINGEMENT. In no event is Cabot responsible for, and Cabot does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information or any product to which it relates. The SPHERON brand is a registered trademark of Cabot Corporation. ©2013, 2008, 2002, 2001 Cabot Corporation. SPSO_pds 09/2014 cabotcorp.com
© Copyright 2024 Paperzz