Custom ceiling systems
Optima ® Radial
Lay-in & Tegular Ceiling Systems
fine texture
cloud
friendly
Optima® Radial Custom White with Prelude® 15/16" custom suspension system (Pgs. 279-280)
Panels designed for dramatic installations, requiring the fine-textured visual and performance of Optima.
Key Selection Attributes
•
Outstanding acoustical performance
in both Articulation Class (190-200) and
NRC (0.90-0.95)
•
•
Typical Applications
•
•
resistant large panels
Sag
30-Year
Limited System Warranty
against visible sag and mold/mildew
Smooth, clean, durable finish –
•
•
Color
White
Details
1. Optima® Square Lay-in
2. Optima Square Tegular
247
•
•
Washable, Impact-resistant,
Scratch-resistant, Soil-resistant
Energy-saving high light-reflective finish
1
•
2
TechLine SM 1 877 276 7876
armstrongceilings.com/commceilings
Office
Education
Hospitality and retail
Healthcare
Transportation
Visit ArmstrongCeilings.com Photo
Gallery to view more installation
photos seaRCh: optima
Recycled
Content
▲
Location
Dependent
54" 60"
Optima Radial system overview
ProductPanelsLength
24"– 66"
24"– 66"
®
Width
System Capabilities
12"- 48"
•
48"
42"
36"
30"
24"
acoustics
66"
60" 66"
material
ingredient
reporting
low emitting/
materials
lighting
quality
fine texture
recyclable/
extended
producer resp.
biobased
materials
recycled
content
sourcing of
raw materials
Lay-in & Tegular Ceiling Systems
EPD
LEED ®
Optima ® Radial
Calculate leeD contribution at
armstrongceilings.com/greengenie
energy
management
construction
waste mgmt
regional
materials
design for
flexibility
Up to
Custom ceiling systems
71%
12" min
12" min
54"
48"
42"
36"
30"
24"
$$$$
Suspension System
Optima Lay-in or Tegular
Custom Trapezoid Lay-in,
Custom Trapezoid Tegular
6" intervals from
24"- 66"
•
•
Meets
taper up to 5°
Minimum inside radius 12"
Center must be a separate component
One-sided:
1-sided
1-sided
1-sided
Minimum Radius:
2-sided
2-sided • Refer to Optima Radial Technical
Guide for additional capabilities
2-sided
Two-sided:
• Each tapered side MUST be
symmetrical
• Refer to Optima Radial Technical
Guide for additional capabilities
equal
equal
Interlude®, Suprafine®, Prelude® (accessible)
with custom cross tees
•
12'– 0"
12'– 0"
12"
12"
•
The minimum achievable radius
is 12'. This is based on a minimum
panel edge of 12" with the
maximum tapers noted below
Optima Radial panels CANNOT be
used inside this 12' radius –
drywall may be a suitable alternative
equal
One-sided or symmetrical
two-sided trapezoid
Minimum radius 12'-0"
(12" minimum panel edge)
1-sided
1-sided
Width:
48" max
•
Trapezoid panels are available
in widths from 12" to 48"
2.5° max
2.5° max
12" min
12" min
12" min
24"–
66"
24"–
66"
•
•
The maximum taper angle per side
for all trapezoids is 2.5 degrees
For two-sided trapezoids, the taper
angle must be equal on both sides
(i.e., symmetrical) for a maximum
of 5 degrees
66"
66"
60"
60"
54"
54"
48"
48"
42"
42"
36"
36"
30"
30"
24"
24"
Length:
• 8 lengths are available in
the following 6" increments:
24," 30," 36," 42," 48," 54,"
60," and 66"
Length 24"-66" in 6" increments
NOTE: This information does not apply to WoodWorks® or MetalWorks™ Radial ceilings. Please consult TechLine at 1 877 276 7876,
or visit armstrongceilings.com/radial for more details.
Physical Data
12'– 0"
Material
12'– 0"
® acoustically transparent
Fiberglass with DuraBrite
membrane.12'–
With0"
or 12"
without CAC backing.
12"
Surface Finish
12"factory-applied latex paint
DuraBrite with
Fire Performance
ASTM E84 and CAN/ULC S102 surface burning
characteristics. Flame Spread Index 25 or less.
Smoke Developed Index 50 or less. (UL labeled)
ASTM E1264 Classification
Type XII, Form1-sided
2, Pattern E
Fire Class A 1-sided
1-sided
2-sided
2-sided
max
2-sided 5°
5° max
5° max
2.5° max
2.5° max
2.5° max
2.5°
max
each
each
SM
2.5° max
2.5°/ max
1 877 276 7876
TechLine
each equal
armstrongceilings.com/commceilings
equal
(search:
optima)
BPCS-4630-316
equal
Humidity/Sag Resistance
HumiGuard ® Plus ceiling tiles maintain superior sag
resistance. Recommended for areas subject to high
humidity, up to, but not including, standing water and
outdoor applications.
Anti-Mold/Mildew
Fiberglass panels inherently inhibit the growth
of mold and mildew.
Primary (Embodied) Energy
See all LCA information on our EPD’s.
High Recycled Content
Contains greater than 50% total recycled content.
Total recycled content based on product composition
of post-consumer and pre-consumer (post-industrial)
recycled content per FTC guidelines.
LEED® is a registered trademark of the U.S. Green Building Council
All other trademarks used herein are the property of AWI Licensing
Company and/or its affiliates © 2016 AWI Licensing Company Printed in the United States of America
insulation value
3/4" – R Factor – 3.0 (BTU units) 0.53 (Watts units)
1" – R Factor – 4.0 (BTU units) 0.70 (Watts units)
1-1/2" – R Factor – 6.0 (BTU units) 1.05 (Watts units)
Weight; Square Feet/carton
Sizes, weight, and square feet vary with order
30-year performance Guarantee & Warranty
When installed with Armstrong ® Suspension System.
Details at armstrongceilings.com/warranty
Minimum order Quantity
1 carton
248
non-standard Fiberglass
24"– 66"
2.5° max
2.5° max
each
each
equal
equal
Taper:
Taper maximum 2.5° angle
per side
Width 12"- 48"
66"
60"
54"
48"
42"
36"
30"
24"
2-sided
2-sided
5° max
5° max