Owl
Owl
“Thanks to an optimum design”
“The result of combining lightweight
and easy-to-handle of handling in the
street”
Design by Lamp Lighting
Street lights tend to be heavy and voluminous, rendering the installation of the same
difficult. The Owl family arises from the concept of taking to the extreme the compensation of lighting performance with regard to the
competitiveness of the product on the market.
2
All this thanks to an optimum design: LED boards, reliable and efficient
drivers, and most important of all: a lightweight and easy-to-handle body.
The development of this body was based on a comprehensive thermal
design with a smooth upper surface and a cooling system in the lower
part surrounding the lighting structure. This ensures the entire front part
is interchangeable and allows for easy access to the cabling and drivers
area. Moreover, this luminaire features a ball and socket which enable it to
be inclined in accordance with the project. More practical than this would
be impossible.
3
660 mm
98
203
752 mm
285
Luminaire Features
Tightness optical compartment: IP66
Tightness body compartment: IP66
Impacts protection: IK10
LED: 4000K
Rated voltage: 220-240 V
Electrical class: I or II
Weight: 7 Kg
Installation height: 4-10 m
180°
IP
66
90°
GLASS
960º
max.
10°
0°
max.
10°
LED
4000 K
0°
Class I
AL: 1 m
1
20%
40%
60%
-1
-2
Emax:
-2
414 lux/klm
-1
0
1
W
33
Code
Color
69.41.59.3
Kg
7,1
street
lm output
3300
48
69.41.48.3
7,1
street
5000
63
69.41.50.3
7,1
street
6545
79
69.41.49.3
7,1
street
7870
96
69.41.51.3
7,2
street
9435
111
69.41.58.3
7,2
street
10900
126
69.41.52.3
7,3
street
12405
W
63
Code
Color
69.41.53.3
Kg
7,1
street
lm output
6545
96
69.41.54.3
7,2
street
9435
126
69.41.55.3
7,3
street
12405
Class II
180°
90°
90°
0°
AL: 1 m
1
40%
60%
0
20%
-1
-2
Emax:
-2
4
Al
90°
0
OWL family is very suitable for lighting main city streets,
secondary streets, trunk roads and reverse priority roads.
It consists of seven luminous flux levels, and its main characteristics are their smart dimension and high efficacy.
Body manufactured of texturised grey lacquered aluminum injection. With serigraphed tempered flat glass.
Passive dissipation through the body for a proper thermal
management.
Models for HI-POWER LED, neutral white color temperature and control gear included. With street optics which
allows a proper luminous distribution.
IP66, IK10 protection rating, and insulation class I or II.
Its ball joint it allows swiveling of the light between 10º and
-10º. Furthermore, it enables to adapt to all types of poles
and supports with no additional adapters.
IK
10
400 lux/klm
-1
0
1
5
1
7. The top cover of the shell has a
wide opening angle and easy opened, making maintenance
easier at heights.
2
1. It has 64 polycarbonate street len-
2. Heat sink that guarantees an opti-
3. Street luminaire made of injected
ses. 3 mm thick tempered fl at glass.
mal low operating temperature, which
polyester lacquered aluminium and
Electronic circuit (PCB) with a voltage
guarantees a long useful life and a
comes in grey and textured graphite
surge safety system.
good luminous fl ux of the LEDs.
colours. IP66 optical system and body.
8. Quick connectors that are easy to
disconnect without tools.
9. Separate unit holder plate, easy to
extract with clips and without tools.
10 m
8m
10
5
6m
0
5
5m
10
4m
4. Fastening system compatible
for columns with a tip diameter of 6076 mm and light poles or wall brackets with a tip diameter of 48-60 mm.
The luminaire is fi xed to the column
externally, and it does not need
opening.
6
5. Swivel hinge-joint allowing for
positions ranging from 15º to -15º.
6. Antimisting valve to prevent condensation.
7
8
9
Córdoba 16,
0 8 2 2 6 Te r r a s s a
( B a r c e l o n a ) S PA I N
T +34 93 736 68 00
F +34 93 786 15 51
[email protected]
lamp.es