Direct Fastening Systems
3.7.1 Fasteners for Attaching Metal Decking
3.7.1.2 Sealing Caps
The AISI 304 stainless steel SDK2 sealing cap with its
neoprene seal installed over the head of the X-ENP-19
fasteners using the SDK2
hand setting tool provides
added corrosion protection.
SDK2 Sealing Cap
SDK2 Setting Tool
3.7.2.1 Tool Information
DX 860-ENP
The DX 860-ENP is a fully automatic powder-actuated tool
designed for attaching metal deck to structural steel beams. The
tool has capacity of 1 strip of 40 cartridges and 4 flexible strips of
10 each X-ENP-19 fasteners in an MXR collated configuration.
The DX 860-ENP is ergonomically designed to work in an upright
position, and can be loaded without bending over. The system is
suitable for deck with a flute width of 3/4" or greater and base
steels with a thickness of 1/4" or greater.
DX 76 & DX 76-MX
DX 76 MX Shown. DX 76 FN-15
(Single fastener guide) also available.
R4X12-S
The DX 76 decking system is a heavy duty system consisting of
semi-automatic, low velocity powder-actuated tool and fasteners
for attaching metal deck to steel base materials. Special features
include cartridge power regulation and an optional MX76 fastener
magazine which allows for high productivity. This system is
suitable for deck with a flute width of 3/4" or greater and base
steels with a thickness of 1/4" or greater. Use with X-ENP-19
fasteners in single, MX or MXR collated configurations.
The R4X12-S decking system is a medium duty pneumatic system
designed for attaching metal deck to steel base materials. With a 20-nail
magazine and rapid cycling rate, this system offers high productivity in
deck installation.
This system is best suited for deck with a flute width of 1/2" or greater and
for base steels (bar joist) with a thickness of 5/32 to 5/16". Fastens XEDN19 THQ12, X-EDNK22THQ12 and X-ZF22THS12 collated fasteners.
DX 460-MX SM
The DX 460-SM decking tool is a medium duty powder-actuated tool
with adjustable power regulation used for attaching metal deck to steel
base materials. This system is best suited for deck with a flute width of
1/2" or greater and for base steels with a thickness of 5/32 to 3/8".
Fastens X-EDN19THQ12, X-EDNK22THQ12, and X-ZF22THS12
fasteners.
DX 860-HSN
The DX 860-HSN stand up decking tool is a fully automatic powder
actuated tool designed for attaching metal deck to steel base
materials. With a high fastening rate and 40-nail magazine, the DX
860-HSN can significantly help reduce the time it takes to attach deck.
Fastenings can be made on very thin support structures without the
need for weld washers. Suitable for base steels with a thickness to
3/8". Fastens X-EDN19THQ12 and X-EDNK22THQ12 fasteners.
52 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.ca.hilti.com I Product Technical Guide 2006