ExamView Student App for Web
User Guide
ExamView Student App for Web
2
© 2017 Turning Technologies, LLC. All rights reserved.
TurningPoint® is a registered trademark and ExamView™ is a trademark of Turning Technologies, LLC. Other trademarked
product names mentioned in this document are owned by their respective companies. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written
permission of Turning Technologies, LLC. For information, address Turning Technologies, LLC, 255 West Federal Street,
Youngstown, OH 44503 USA.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
ExamView Student App for Web
3
Contents
CONTENTS
3
ABOUT EXAMVIEW STUDENT
Technical Requirements
Installing ExamView Student
4
4
4
ONLINE TESTING
Logging into an ExamView Student Online Test
Responding to Online Test Questions
Responding to Multiple Choice Questions
Responding to Multiple Response Questions
Responding to True/False Questions
Responding to Yes/No Questions
Responding to Matching Questions
Responding to Numeric Response Questions
Responding to Short Answer Questions
Submitting a Test
Closing ExamView Student
5
5
6
6
7
7
8
8
9
9
10
11
POLLING SESSIONS
Logging into the ExamView Student App
Closing ExamView Student
Student-Managed Polling Sessions
Responding to Polling Questions
Responding to Multiple Choice Questions
Responding to Multiple Response Questions
Responding to True/False Questions
Responding to Yes No
Responding to Matching Questions
Responding to Numeric Response Questions
Responding to Short Answer Questions
Teacher-Led Polling
Responding to Polling Questions
Responding to Multiple Choice Questions
Responding to Multiple Response Questions
Responding to True/False Questions
Responding to Yes No
Responding to Matching Questions
Responding to Numeric Response Questions
Responding to Short Answer Questions
12
12
13
13
14
14
14
15
15
16
16
17
18
18
18
18
19
19
20
20
21
ExamView Student App for Web
About ExamView Student
ExamView Student allows you to use a computer to (1) respond to questions on an online test from anywhere through an
internet connection and (2) join a polling session and respond to teacher-led or student-managed assessments.
ExamView Student allows you to respond to a variety of question types including Multiple Choice, Multiple Response,
True/False, Yes/No, Numeric Response, Completion, Matching, and Short Answer. Questions and answer choices are
displayed.
This chapter covers the following topics:
Technical Requirements
The following technical requirements are required for ExamView Student to function properly:
l
Internet connection
l
Instructors must use ExamView Student with ExamView Assessment Suite v11.
l
Adobe Flash Player v11.1.0 or above
l
PC browsers supported: Chrome v3.20+, Firefox v17.0+, and Microsoft Internet Explorer v10.0+
l
Mac browsers supported: Chrome v3.20+, Firefox v17.0+, and Safari v9.1.3+
l
Chrome browser supported: Chrome v3.20+
WARNING
Standard data rates may apply. Turning Technologies is not responsible for any cellular usage
charges.
Installing ExamView Student
1 Go to www.turningtechnologies.com/downloads.
2 Select the ExamView tab.
3 Click Launch ExamView Student under ExamView Student Web.
4
ExamView Student App for Web
Online Testing
This section covers using ExamView Student for online tests.
This chapter covers the following topics:
Logging into an ExamView Student Online Test
Responding to Online Test Questions
Submitting a Test
Closing ExamView Student
Logging into an ExamView Student Online Test
To use ExamView Student, you must log in using a Student ID, an Online Test ID, and a test password.
1 Open ExamView Student.
2 Enter your assigned Student ID provided by your instructor in the Student ID field.
TIP
If you do not remember your Student ID, ask your instructor.
3 Enter the Online Test ID provided by your instructor in the Online Test ID field.
5
ExamView Student App for Web
NOTE
If you do not see an Online Test ID field, click Click here at the bottom of the window to
respond to an online test.
4 Click
.
5 Enter the password provided by your instructor in the Password field.
6 Click OK.
The first question on the online test is displayed.
Responding to Online Test Questions
An online test may include a variety of question types including Multiple Choice, Multiple Response, True/False, Yes/No,
Numeric Response, Matching, and Short Answer. Questions and answer choices are displayed.
TIP
l
l
l
l
l
l
l
You can respond to the questions at your own pace from anywhere.
The left side of the window allows you to navigate from one question to the next. Each
question is numbered and includes an abbreviation of the question type (for example, MC
is a Multiple Choice question).
You can scroll the questions in the navigation pane by clicking in the area and holding as
you move up or down.
The selected question displays in the question area. Answer options display above the
question.
You can answer the questions in any order.
Answered questions display your answer in the navigation pane immediately under the
question identifier.
You can return to a question and change your answer.
Responding to Multiple Choice Questions
Multiple Choice questions display the question and answer choices. You must select one answer choice.
6
ExamView Student App for Web
7
1 In the answer options area above the question, click the letter that corresponds to the answer choices.
2 Click
.
Responding to Multiple Response Questions
Multiple Response questions display the question and answer choices. You may select more than one response to a question.
1 In the answer options area above the question, click the letter(s) that correspond to the answer choice(s).
2 Click
.
Responding to True/False Questions
True/False questions display the question and answer choices. You must select one answer choice.
ExamView Student App for Web
1 In the answer options area above the question, click either True or False.
2 Click
.
Responding to Yes/No Questions
Yes/No questions display the question and answer choices. You must select one answer choice.
1 In the answer options area above the question, click either Yes or No.
2 Click
.
Responding to Matching Questions
Matching questions display the question and answer choices. You must select one answer choice.
8
ExamView Student App for Web
1 In the answer options area above the question, click the letter that corresponds to the answer choices.
2 Click
.
Responding to Numeric Response Questions
Numeric Response questions display the question and an answer field for you to type your response.
1 Click the blank Answer field above the question.
2 Type your answer.
3 Click
.
Responding to Short Answer Questions
Short Answer questions display the question and an answer field for you to type your response.
9
ExamView Student App for Web
10
1 Click in the blank Answer field above the question.
2 Type your answer.
TIP
Responses can include alpha-numeric characters, uppercase and lowercase letters, and no
character limit.
Long responses will remain a continuous string of text; you cannot separate a long response
into paragraphs.
3 Click
.
Submitting a Test
After you answer all the questions on an online test, you must submit the test.
1 Click
in the lower-left corner.
TIP
If
test.
is not blue you have not answered all the questions on the online
2 Click OK to confirm that you want to submit your online test.
ExamView Student App for Web
3 When you successfully send your test, the Online test successfully saved message appears.
TIP
You can submit an online test only once unless a teacher allows you to take it multiple
times.
Closing ExamView Student
Click
to close ExamView Student.
11
ExamView Student App for Web
12
Polling Sessions
This section covers using ExamView Student in a polling session to respond to teacher-led or student-managed assessments.
This chapter covers the following topics:
Logging into the ExamView Student App
Closing ExamView Student
Student-Managed Polling Sessions
Teacher-Led Polling
Logging into the ExamView Student App
To use ExamView Student, you must log in using a Student ID and a Session ID.
1 Open ExamView Student.
By default, the app will open to the Online Test login.
ExamView Student App for Web
13
2 Select Click Here at the bottom of the app to use ExamView Student on a polling session.
3 Enter your assigned Student ID provided by your instructor.
4 Enter the Session ID provided by your instructor and click
.
5 If prompted, enter the password provided by your instructor in the Password field.
6 Click OK.
You have now joined the session.
TIP
You can only join one session at a time.
Closing ExamView Student
Click
to close ExamView Student.
Student-Managed Polling Sessions
This section covers using ExamView Student in a student-managed polling session to respond to assessments.
ExamView Student App for Web
14
Responding to Polling Questions
A polling session may include a variety of question types including Multiple Choice, Multiple Response, True/False, Yes/No,
Numeric Response, Matching, and Short Answer. Questions and answer choices are displayed.
TIP
You can respond to the questions at your own pace.
l
The left side of the window allows you to navigate from one question to the next. Each
question is numbered and includes an abbreviation of the question type (for example, MC
is a Multiple Choice question).
l
You can scroll the questions in the navigation pane by clicking in the area and holding as
you move up or down.
l
The selected question displays in the question area. Answer options display above the
question.
l
You can answer the questions in any order.
l
Answered questions display your answer in the navigation pane immediately under the
question identifier.
l
You can change or edit your answer as long as polling is open.
l
Responding to Multiple Choice Questions
Multiple Choice questions display the question and answer choices. You must select one answer choice.
1 In the answer options area above the question, click the letter that corresponds to the answer choices.
2 Click
.
Responding to Multiple Response Questions
Multiple Response questions display the question and answer choices. You may select more than one response to a question.
ExamView Student App for Web
1 In the answer options area above the question, click the letter(s) that correspond to the answer choice(s).
2 Click
.
Responding to True/False Questions
True/False questions display the question and answer choices. You must select one answer choice.
1 In the answer options area above the question, click either True or False.
2 Click
.
Responding to Yes No
Yes/No questions display the question and answer choices. You must select one answer choice.
15
ExamView Student App for Web
1 In the answer options area above the question, click either Yes or No.
2 Click
.
Responding to Matching Questions
Matching questions display the question and answer choices. You must select one answer choice.
1 In the answer options area above the question, click the letter that corresponds to the answer choices.
2 Click
.
Responding to Numeric Response Questions
Numeric Response questions display the question and an answer field for you to type your response.
16
ExamView Student App for Web
1 Click the blank Answer field above the question.
2 Type your answer.
3 Click
.
Responding to Short Answer Questions
Short Answer questions display the question and an answer field for you to type your response.
1 Click in the blank Answer field above the question.
2 Type your answer.
TIP
Responses can include alpha-numeric characters, uppercase and lowercase letters, and no
character limit.
Long responses will remain a continuous string of text; you cannot separate a long response
into paragraphs.
17
ExamView Student App for Web
3 Click
18
.
Teacher-Led Polling
This section covers using ExamView Student in a polling session to respond to teacher-led assessments in real-time.
This section covers the following topics:
Responding to Polling Questions
Responding to Polling Questions
A polling session may include a variety of question types including Multiple Choice, Multiple Response, True/False, Yes/No,
Numeric Response, Matching, and Short Answer. Questions and answer choices are displayed.
TIP
l
Your teacher sets the pace.
l
The question displays in the question area. Answer options display above the question.
l
You can change or edit your answer as long as polling is open.
Responding to Multiple Choice Questions
Multiple Choice questions display the question and answer choices. You must select one answer choice.
1 In the answer options area above the question, click the letter that corresponds to the answer choices.
2 Click
.
Responding to Multiple Response Questions
Multiple Response questions display the question and answer choices. You may select more than one response to a question.
ExamView Student App for Web
1 In the answer options area above the question, click the letter(s) that correspond to the answer choice(s).
2 Click
.
Responding to True/False Questions
True/False questions display the question and answer choices. You must select one answer choice.
1 In the answer options area above the question, click either True or False.
2 Click
.
Responding to Yes No
Yes/No questions display the question and answer choices. You must select one answer choice.
19
ExamView Student App for Web
1 In the answer options area above the question, click either Yes or No.
2 Click
.
Responding to Matching Questions
Matching questions display the question and answer choices. You must select one answer choice.
1 In the answer options area above the question, click the letter that corresponds to the answer choices.
2 Click
.
Responding to Numeric Response Questions
Numeric Response questions display the question and an answer field for you to type your response.
20
ExamView Student App for Web
1 Click the blank Answer field above the question.
2 Type your answer.
3 Click
.
Responding to Short Answer Questions
Short Answer questions display the question and an answer field for you to type your response.
1 Click in the blank Answer field above the question.
2 Type your answer.
TIP
Responses can include alpha-numeric characters, uppercase and lowercase letters, and no
character limit.
Long responses will remain a continuous string of text; you cannot separate a long response
into paragraphs.
21
ExamView Student App for Web
3 Click
.
22