www.studioefabrics.com
Ahoy Matey
QUILT 1
PROCESS COLOR:
Featuring fabrics from the Ahoy Matey collection by Mary Jane Mitchell for
Fabric Requirements
(A) 3258P-11 ...........
(B) 3259-11 ..............
(C) 3260-44 ..............
(D) 3262-11 .............
(E) 3261-88 ..............
(F) 3260-11 ..............
(G) 3262-44 ..............
(H) 3263-44 ..............
1 panel
¼ yard
¼ yard
¼ yard
¼ yard
¼ yard
¼ yard
¼ yard
(I) 3263-77 ............... 1 ½ yards*
Backing
3259-11 ............... 3 ¼ yards
*Includes binding
Additional Supplies Needed
Batting 56” x 62”
Piecing and sewing thread
Quilting and sewing supplies
GRAYSCALE:
Pattern Information
Quilt designed by Heidi Pridemore
Finished Quilt Size 48" x 54"
Skill Level: Advanced Beginner
B/W:
Cutting Instructions
•STUDIO e PROJECTS•
www.studioefabrics.com
Cutting
Page 2 of 5
Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.
WOF= Width of Fabric • LOF = Length of Fabric
Fabric A (3258P-11 Panel – Multi):
• Fussy cut (1) 33 ½” x 39 ½” rectangle.
Fabric B (3259-11 Blocks – Multi):
• Fussy cut (4) 6 ½” squares.
Fabric C (3260-44 Tossed Sea Life – Yellow), cut:
• (2) Template Two triangles.
Fabric D (3262-11 Flags – Blue), cut:
• (6) Template Two triangles.
Fabric E (3261-88 Seagulls – Red), cut:
• (6) Template Two triangles.
Fabric F (3260-11 Tossed Sea Life – Blue), cut:
• (4) Template Two triangles.
Fabric G (3262-44 Flags – Cream), cut:
• (4) Template Two triangles.
Fabric H (3263-44 Stars – Yellow), cut:
• (4) Template Two triangles.
Fabric I (3263-77 Stars – Navy), cut:
• (6) 2 ½” x WOF strips for the binding.
• (2) 2 ½” x 39 ½” WOF strips.
• (2) 2 ½” x 37 ½” WOF strips.
• (26) Template One triangles.
• (26) Template Three triangles.
Backing (3259-11 Blocks – Multi), cut:
• (2) 56” x WOF. Sew the strips together and trim to 56” x 62” for the back.
•STUDIO e PROJECTS•
Page 3 of 5
www.studioefabrics.com
Sewing
Sew using a ¼” seam allowance with right sides together (RST) unless otherwise indicated. Always
press towards the darker fabric while assembling, unless otherwise noted by the arrows.
Block Assembly
1. Sew (1) 2 ½” x 39 ½” Fabric I strip to each side of the 33
½” x 39 ½” Fabric A rectangle. Sew (1) 2 ½” x 37 ½” Fabric I
strip to the top and to the bottom of the Fabric A rectangle.
Trim the block to measure 36 ½” x 42 ½” to make the Center
Block (Fig. 1).
2. Place (1) Fabric I-Template One triangle on top of (1)
Fabric C-Template Two triangle, right sides together, aligning
the left sides (Fig. 2). Sew the two triangles together along
the left side. Press the smaller triangle open.
3. Place (1) Fabric I-Template Three triangle on top of the
Fabric C-Template Two triangle, right sides together, aligning
the right sides (Fig. 3). Sew the two triangles together along
the right side. Press the smaller triangle open to make (1) ICI
unit (Fig. 4). Trim the ICI unit to measure 6 ½” square.
4. Repeat Steps 2-3 to make a second ICI unit.
I
A
I
Trim to measure
36 ½” x 42 ½”
after the borders
are added
I
I
Fig. 1
make 2
I
I
C
Fig. 2
Fig. 3
Fig. 4
5. Repeat Steps 2-3 using (6) Fabric I-Template One triangles, (6) Fabric D-Template Two triangles and (6)
Fabric I-Template Three triangles to make (6) 6 ½” IDI units (Fig. 5).
6. Repeat Steps 2-3 using (6) Fabric I-Template One triangles, (6) Fabric E-Template Two triangles and (6)
Fabric I-Template Three triangles to make (6) 6 ½” IEI units (Fig. 6).
7. Repeat Steps 2-3 using (4) Fabric I-Template One triangles, (4) Fabric F-Template Two triangles and (4)
Fabric I-Template Three triangles to make (4) 6 ½” IFI units (Fig. 7).
8. Repeat Steps 2-3 using (4) Fabric I-Template One triangles, (4) Fabric G-Template Two triangles and (4)
Fabric I-Template Three triangles to make (4) 6 ½” IGI units (Fig. 8).
9. Repeat Steps 2-3 using (4) Fabric I-Template One triangles, (4) Fabric H-Template Two triangles and (4)
Fabric I-Template Three triangles to make (4) 6 ½” IHI units (Fig. 9).
make 6
make 6
make 4
make 4
I
I
I
I
I
I
I
I
make 4
I
I
D
E
F
G
H
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
•STUDIO e PROJECTS•
Page 4 of 5
www.studioefabrics.com
Quilt Top Assembly
(Follow the Quilt Layout while assembling the quilt top.)
10. Sew (7) assorted units together to make (1) strip. Repeat to make a second strip. Sew the (1) strip to
each side of the Center Block.
11. Sew (6) assorted units together to make (1) strip. Sew (1) 6 ½” Fabric B square to each end of the strip
to make the top border. Repeat to make the bottom border. Sew the borders to the Center Block to make the
quilt top.
Layering, Quilting and Finishing
12. Press the quilt top and 56” x 62” backing well. Layer backing (wrong side up), batting, pressed quilt top
(right side up) and baste. Quilt as desired and trim excess batting and backing when quilting is complete.
Binding
13. Cut the ends of the (6)
Fabric I binding strips at a
45-degree angle and sew end
to end to make (1) continuous
piece of binding. Fold in half
lengthwise and press wrong
sides together.
B
14. Sew the binding to the front
of the quilt, raw edges together.
Turn the folded edge to the back,
and hand stitch in place.
C
D
E
F
G
B
H
E
D
D
E
H
F
G
G
F
H
E
D
D
E
B
Quilt Layout
H
D
E
F
G
C
B
•STUDIO e PROJECTS•
Page 5 of 5
Template One
Template Two
Template Three
1” square
for scale
www.studioefabrics.com
© 2015 Studio e Fabrics ®