250 Watts of CO2 Power With 800 Watts Peak Pulse Power
Bridge the gap between low and high power pulse capabilities
with the new Pulstar p250 pulsed CO2 laser.
Synrad proudly introduces the newest addition to the groundbreaking Pulstar family of
pulsed CO2 lasers with the Pulstar p250. Featuring 250 watts of average power with an
industry-first typical peak pulse power of 800 watts, the p250 provides users with an
accessible entry point into high power laser processing, at an affordable price.
Based on the same proven technology behind the success of Synrad’s i401, the p250’s
peak pulse power takes materials processing a step further by allowing users to cut
faster and drill deeper through a variety of materials, including aluminium, with minimal
heat affect zone and superior cut edge quality. The p250’s longer tube design provides
excellent power stability, making it ideal for applications that demand the highest levels
of consistency and precision.
If you’re one of the many who are eager to introduce refined high-power laser
processing into your production lines, then the p250 is the undisputable competitive
choice in today’s laser market. For more information about Synrad’s p250 pulse power
laser, and other lasers from Synrad, visit www.synrad.com today!
Pulstar p250 Core Features:
Specifications:
Model
Average Output Power*
Peak Pulse Power (typical)
Peak Pulse Energy (typical)
Pulse Length, max
p250
> 250 W
800 W
600 mJ
1000 µs (1.0 ms)
Rise Time
< 50 µs
Duty Cycle Range
Power Stability, guaranteed
(from cold start)
Mode Quality
Beam Waist Diameter
(at 1/e2)
Beam Divergence (full
angle)
Ellipticity
Polarization
Wavelength (typical)
Input Voltage / Current**
Heat Load (max)
Cooling
Flow Rate***
Dimensions (in)
Dimensions (mm)
Weight
0% - 45%
±5%
M2 < 1.2
• Average output power > 250W
• Peak pulse power of 800W (typical)
• Peak pulse energy (typical) of 600 mJ
• Max pulse width of 1000 µs (1.0 ms)
• Fast rise time of less than 50 µs
• Exceptional power stability (±5%)
• Pulsed operation up to 100 kHz
• Duty cycle range of 0% to 45%
• Excellent mode quality (M2 < 1.2)
8.5 ± 1mm
< 2.0 mrad
< 1.2
Linear (Horizontal)
10.2 - 10.7µm
48 ± 0.5 VDC / 90 A
4300 W
Water
3.0 GPM, < 60 PSI
49.3 x 12.4 x 7.8
1252 x 315 x 198
120 lbs / 54.4 kg
Specifications subject to change without notice.
*Power level guaranteed for 12 months regardless of operating
hours, applied over recommended coolant flow rate & temp. range.
• Integrated RF drive - no bulky RF
power supply or cables!
• Modular electronics packaging
based on proven i401 architecture
• Built-in gas purge port
• TCP/IP web-based diagnostics
• Efficient RF design for low power
consumption
• Ideally suited for clean highspeed, low HAZ processing
Outline and Mounting:
BEAM EXIT
.750
19.05
46.875
1190.63
C
L
7.820
198.63
4.200
106.68
3.040
77.22
49.275
1251.59
FRONT
SIDE
STATUS LEDS
ETHERNET
PORT
USER I/O PORT
1/4" PURGE FITTING
WATER OUTLET
(12mm TUBE FITTING)
48V POWER TERMINAL 12.400
(M10X1.5)
314.96
WATER INLET
(12mm TUBE FITTING)
C
L
GND TERMINAL
(M10X1.5)
**200A peak for < 1000 µs.
***At coolant temperatures above 22°C, derate power 0.5 W/°C to 1
W/°C up to a coolant temperature of 30 °C.
REAR
9.250
234.95
BOTTOM
38.825
986.16
® Synrad, Inc., 4600 Campus Place • Mukilteo, WA 98275, USA
tel: 1.425.349.3500 • fax: 1.425.349.3667 • e-mail: [email protected]
Invisible Laser Radiation.
Avoid eye or skin exposure to direct or scattered radiation.
Class 4 Laser Product.
Datasheet - p250 (2014-02 v5) US
www.synrad.com