CHISEL PLOWS
- tines with 2 x ½” bolt holes @ 57mm centres
Type of
Machine
find your
machine
here!
Points
selection
CASE PTX 600, CONCORD, J. DEERE,
FRIGGSTAD, FLEXICOIL 550/650
MORRIS 750, SHEARER T/WORKER
See
below
Seed
boots
ST-SBB-3 ST-DPB-F3 (32mm O/D hose) or
ST-DPB-LF3 (38mm O/D hose)
ALL
Note: use ST-DPB-FTW for Shearer T/worker (57mm centres)
PR 86 DB-ATW
SUPER SEEDER
(60mm Wing)
PR 86 DB-TW
SUPER SEEDER
(60mm Wing)
Tungsten Carbide on leading
edge and underside of wing
$83.00 exc. GST
$91.30 inc. GST
Dual Shoot
fertiliser boots
See ST-SBB-4 ST-DPB-F4 (32mm) or ST-DPB-LF4 (38mm)
below ST-SBB-4 ST-DPB-F7 (32mm) or ST-DPB-LF7 (38mm)
BOURGAULT, EZEE-ON
AFM SCARICHISEL
86
S/Shoot
brackets
Can’t find what you need?
Contact your Dealer or nearest
Primary Sales Australia office
Angled Tungsten Carbide
on leading edge and wings
$89.50 exc. GST
$98.45 inc. GST
86
ST-DPB-F3
ALL
ALL
(32mm O/D hose)
$57.25 exc. GST, $62.98 inc. GST
ST-DPB-LF3 (38mm O/D hose)
$59.50 exc. GST, $65.45 inc. GST
½” bolt holes @
57mm centres
DOUBLE SHOOT BOOTS
87
PR 87
16mm
HEAVY DUTY KNIFE
Tungsten Carbide on leading edge
$82.00 exc. GST
$90.20 inc. GST
PR 45 Slip-on
SUPER SEEDER
Tungsten Carbide on
leading edge and wings
M8x20 roll pin included
$119.00 exc. GST
$130.90 inc. GST
PR 44 Slip-on
KNIFE POINT
Tungsten Carbide
on leading edge
M8x20 roll pin included
$98.00 exc. GST
$107.80 inc. GST
“Slimline” wedge P. No. PA-15557
( 1/2” bolts @ 57mm ctrs.)
$16.00 exc. GST, $17.60 inc. GST
Use C/S plow bolts & Nylocs P. No. B 212-1CSPB
$1.55 exc. GST, $1.71 inc.GST
Note: These slip-on points fit most standard wedges.
We sell and recommend Agpoint wedges.
Ensure your wedges are not too long to allow fitment
of the roll-pin, which is essential to prevent loss of
the point. Knock roll-pin through point to remove.
Warning!
BOLTS & NUTS
for narrow points:
Two 2¾”x 1/2” G8
Bolts & Nylocs
(Includes extra length for
fitting boots)
Torque setting 82 Nm, 60 lbft
POINTS ARE
TUNGSTEN CARBIDE
TIPPED FOR EXTRA WEAR LIFE AND
EXCELLENT PENETRATION !
Use the cross-bolt to position the fertiliser delivery tube for deep or
shallow placement. These fertiliser boots are also popular for single
shoot seeding behind shallow working points, but only when sowing
at depth of working.
ST-DPB-F4 (32mm O/D hose)
$57.25 exc. GST, $62.98 inc. GST
ST-DPB-LF4 (38mm O/D hose)
$59.50 exc. GST, $65.45 inc. GST
18
PR 18-T
2 ½” Ripper
T.C. Tipped
½” bolt holes @
45-57mm centres
$45.10 exc. GST
$49.61 inc. GST
Dividing ridge avoids bringing
“sour” soil to the surface
CASE
Concord
MORRIS
Gumbo
Ground engaging
parts are available
while stocks last
See page 14 for seed boot
options for all machines
ST-SBB-3
$32.50 exc. GST
$35.75 inc. GST
SINGLE SHOOT BRACKETS
ST-SBB-4
$32.50 exc. GST
$35.75 inc. GST
The assembly and use of agricultural machinery can be Dangerous!
Be safe....Protect yourself!In the interests of safety, Primary Sales Australia
recommends that safety glasses and personal safety equipment be used when fitting,
adjusting or using any products, especially cast, heat treated and hard faced points.