2 x 6 RADIAL FLOW SUPERPHOBIC® PRODUCT DATA SHEET
56 mm
(2.2 in)
Membrane Characteristics
Cartridge Configuration
No Baffle Radial Flow
Liquid Flow Guidelines
100 ml/min – 1 liter/min
Liquid must flow on the shellside
Liquid Inlet
Membrane Type
UltraPhobic™
UltraPhobic™ II
Recommended for low
surface tension liquids
that are water-based
Recommended for low
surface tension fluids
with aggressive
formulations
Membrane/Potting Material
Polyolefin / Polyethylene
0.3 m2
Typical Membrane Surface Area
Priming Volume
77 ml
Shellside
143 mm
(5.6 in)
Pressure Guidelines*
Liquid
Outlet
Maximum Shellside LIQUID Working
Temperature/Pressure
UltraPhobic™
UltraPhobic™ II
5-25 C, 4.1 barg
(41-77 F, 60 psig)
50 C, 1.0 barg
(122 F, 15 psig)
5-25 C, 7.2 barg
(41-77 F, 105 psig)
75 C, 1.0 barg
(167 F, 15 psig)
* Note: Liquid pressure should always exceed gas pressure. If no vacuum is used, 1 barg (15 psig) can be
added to pressures above.
Housing Options and Characteristics
Material
Polyethylene
Connections
Vacuum
Note: All dimensions are nominal values.
Refer
to liqui-cel.com
for detailed
NOTE:
All dimensions
are housing
drawings.
nominal values
Shellside
(Liquid Inlet/Outlet)
1/4 inch NPT Female
Lumenside (vacuum)
1/4 inch NPT Female
Weight (approximate)
Dry
Liquid full (shellside - water)
Shipping weight
UltraPhobic™
UltraPhobic™ II
140 grams
220 grams
310 grams
Regulatory
Complies with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC. Constructed of
FDA CFR title 21 compliant materials for wetted parts only at ambient temperatures.
2 x 6 RADIAL FLOW SUPERPHOBIC® PRODUCT DATA SHEET
0
0.05
0.11
0.16
W a t e r F l o w R a t e (gpm)
0.21
0.26
100
UP Membrane
80
UPII Membrane
60
40
20
0
0
200
400
600
0
0.05
0.11
0.16
0.21
0
200
400
600
800
800
1000
40
30
20
10
0
1000
Water Flow Rate (ml/min)
Water Flow Rate (ml/min)
UltraPhobic™
0.26
50
Pressure Drop (mm WC)
%Dissolved Oxygen Removal
W a t e r F l o w R a t e (gpm)
UltraPhobic™ II
UltraPhobic™
UltraPhobic™ II
Test condition O2 Removal: Vacuum mode with water at 45 C. Vacuum: 50 torr
Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M
believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular
application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining
whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M
warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M
product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special,
incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
3M, Membrana, SuperPhobic and UltraPhobic are trademarks of 3M Company. All other trademarks are the property of their respective owners.
© 2015 3M Company. All rights reserved. (D82_Rev13)
Industrial Business Group
Membranes Business Unit
13840 South Lakes Drive
Charlotte, North Carolina 28273
USA
3M Deutschland GmbH
Membranes Business Unit
Öhder Straße 28
42289 Wuppertal
Germany
3M Japan Ltd.
Membranes Business Unit
6-7-29, Kita-Shinagawa,
Shinagawa-ku, Tokyo | 141-8684
Japan
Phone: +1 704 587 8888
Fax: +1 704 587 8610
Phone: +49 202 6099 - 658
Fax: +49 202 6099 - 750
Phone: +81 3 6409 5732
Fax: +81 3 6409 5827
www.superphobic.com