INSTALLATION GUIDE
DMX DECODER
SPECIFICATION
BRIGHTLIGHT CODE:
BL-DMX-102
IP RATING:
Indoor Use Only
DIMENSIONS (MM):
L166 X W67 X H41
VOLTAGE:
12 or 24 Volt DC
DMX CHANNELS:
3 Channels
POWER OUTPUT:
12 Volt: 48 watt max
24Volt: 96 watt max
OPERATING TEMP:
-20° ~ +60°C
HOUSING:
Aluminium
DMX Decoder
INSTRUCTION GUIDE
Dip Switches:
Dip switches 1-9 are used to set the starting DMX address for 3 channels. Using binary values, set the required DMX patch
address for your pack:
Switch#
(1) (2) (3) (4) (5) (6) (7) (8) (9)
on off
Value
(Binary)
1
2
4
8 16 32 64 128 256
As the illustration above shows, each dip switch incorporates a value that should be used when trying to figure out DMX
address settings. Dip Switch 1 = 1, Dip Switch 2 = 2, Dip Switch 3 = 4, Dip Switch 5 = 8, etc... The value for every dip switch
doubles counting from left to right. The goal is to try to get to the required DMX patch number by using the least number of
dip switches and adding the binary values for each dip switch to land on the required address number.
For Example: These would be the dip switch settings for the specified DMX addresses.
Dip Switches Settings
DMX Address
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Dip Switches Settings
1
1
2
4
8 16 32 64 128 256
15
1
(1) (2) (3) (4) (5) (6) (7) (8) (9)
2
4
8 16 32 64 128 256
(1) (2) (3) (4) (5) (6) (7) (8) (9)
2
1
2
4
8 16 32 64 128 256
106
1
(1) (2) (3) (4) (5) (6) (7) (8) (9)
2
4
8 16 32 64 128 256
(1) (2) (3) (4) (5) (6) (7) (8) (9)
3
1
2
4
8 16 32 64 128 256
259
1
(1) (2) (3) (4) (5) (6) (7) (8) (9)
2
4
8 16 32 64 128 256
(1) (2) (3) (4) (5) (6) (7) (8) (9)
10
1
2
4
DMX Address
(1) (2) (3) (4) (5) (6) (7) (8) (9)
8 16 32 64 128 256
www.brightlight.co.nz | 0800 952 000
417
1
2
4
INNOVATION
8 16 32 64 128 256
• QUALITY • SERVICE • WARRANTY
INSTALLATION GUIDE
DMX DECODER
If Dip Switch10 (Fun) is ON, the following functions apply:
Dip Switch Settings
Function
Switch 1-9 is OFF
Black
Switch 1 = ON
Red
Switch 2 = ON
Green
Switch 3 = ON
Blue
Switch 4 = ON
Yellow
Switch 5 = ON
Purple
Switch 6 = ON
Cyan
Switch 7 = ON
White
Switch 8 = ON
seven colour jump changes
Switch 9 = ON
seven colour gradual changes
If the Dip Switch setting is 8 or 9 for colour changes, the switches 1 to 7 control the change speed with Siwtch 1 ON being
the slowest and Switch 7 ON is the fastest.
CONNECT DIAGRAM
DMX512 Console
DMX in
DMX out
DMX in
DMX512
DECODER
DMX in
DMX512
DECODER
load output
Power
DMX out
DMX512
DECODER
load output
power in
Power
power in
LED Lamp
www.brightlight.co.nz | 0800 952 000
load output
Power
LED Lamp
INNOVATION
DMX out
power in
LED Lamp
• QUALITY • SERVICE • WARRANTY