The widest range of
RPE
PLI
STD
SXT
SLT
SHT
STD
transport trailer
Plat-O-Sol
STD 450-600
Plat-O-Sol
1 rear axel
Classic ones :
Simple, practical and rugged.
Payload : 4,5 t.
Inside length :
4,5 M and 6 M
STD 450
+
Transportation of agricultural equipment,
or for use in viticulture or arboriculture.
+ Hydraulic front stand.
STD 450
+ Two rear single-effect cylinders ensure
the placement on the ground and the
Especially for viticulture: SPV-STD
Standard accessories :
[Rear steering axle
[Hitch tongue without
uncoupling
STD SPV 450
Technical specifications
Standard equipment :
!200 x 150 central beam. 200 x 100 belt.
!40 mm-thick wooden floor screwed along the length of the
transport trailer.
!70 mm square rear axle, mechanical braking.
!Floor height in transport position: 0.6m.
!Machine lowering system controlled by two hydraulic
cylinders.
!Hydraulic retractable front stand for loading tools from the
front of the transport trailer.
!Two 11.5/80 x 15.3 wheels - 10 plys.
!Standard lights. Two tie-down straps.
!Load carrying capacity: 4.5 tonnes.
Options :
+ Rear steering axle with hydraulic controls.
+ Direction indicator for the rear axle.
+ Hydraulic braking.
+ Hydraulic front hitch tongue without
uncoupling.
+ Front and rear boards with removable sides.
+Electro-hydraulic control from a single doubleeffect distributor.
+Reinforced chassis and hydraulic controls for
load carrying capacity between 5.5 and 6
SHT 450-600
Plat-O-Sol
Extremely
practical :
1 sliding axle
No bending - rugged,
easy to handle and use.
Payload : 5 t.
Inside length :
4,5 M et 6 M
SHT 450
+Transportation of heavy equipment,
as well as forage, big bags or picking
boxes.
Possibility of unloading at a platform.
+A
cylinder, placed inside the axle,
pushes the rear axle behind the transport
trailer thanks to rollers moving on two rails
and guiding rollers placed on the rear of
the plate.
Optional: Control of all
hydraulic functions from an
on-board electrical box unit.
Technical specifications
Standard equipment :
!250 x 150 central beam. 250 x 100 belt.
!40 mm-thick wooden floor screwed along the length of
the transport trailer.
!70mm square rear axle, hydraulic braking.
!Machine lowering system controlled by one hydraulic
cylinder.
!Hydraulic retractable front stand for loading tools from
the front of the transport trailer.
!Floor height in transport position: 0.8m.
!Two 350/50 - 16 wheels - 12 plys.
!Standard lights. Two tie-down straps.
!Load carrying capacity: 5 tonnes.
Options :
+Hydraulic front hitch tongue without uncoupling.
+Front and rear boards with removable sides.
+Electro-hydraulic control from a single doubleeffect distributor.
New hitch tongue
[Can be adapted to the highest hooks.
[Ultra-flat profile – ideal for front loading.
Plat-O-Sol
SLT/SXT 600-700-880
The "heavyweights" :
No bending - rugged,
easy to handle and use.
Inside length :
6 m - 7 m - 8,80 m
SLT 700
+ Ideal for any transportation
+The new SLT and SXT transport trailers
are equipped with the same machine
lowering system as featured on the
SHT, with a cylinder fitted inside the
central beam.
+The
position of the axles during
transportation gives great
manoeuvrability and excellent rigidity
of the transport trailer.
+ Once
the transport trailer has
been lowered to the ground, the
stand retracts completely to allow
loadings from the front.
SXT 880 S
+ Double fixed axle or swinging axle.
Technical specifications
SLT 700
Standard equipment on SLT and SXT:
!Load carrying capacity: 6 tonnes and 9 tonnes.
!250 x 150 central beam (S355 steel for the SXT).
!250 x 100 belt, 40 mm-thick wooden floor.
!70 or 80mm double square rear axle, hydraulic braking.
!Machine lowering system controlled by one hydraulic cylinder.
!Hydraulic retractable front stand for loading tools from the front of the transport trailer.
!Floor height in transport position: 0.8m.
!Four 10.0/75x15.3 wheelse -10 plys or 340/55 x 16.
!Standard lights. Two tie-down straps.
!Loading height: 250 mm.
!Rear totally clear to allow loading at a platform (not available on S model).
Standard equipment on SLT S and SXT
S:
Identical on both SLT and SXT except:
!Load carrying capacity : 7 and 9 tonnes.
!Floor height in transport position: 0.8m.
!Swinging axle.
Options :
+Ladder racks for transporting forage.
+Hydraulic front hitch tongue without
SXT 700
Tilting transport trailer
PLI 2500-4000
Multi-purpose :
Payload:
2,6 t. / 4,1 t.
Simple, practical and
self-working.
Inside length :
4,50 m - 6 m
7m
+Easy to couple with its telescopic hitch tongue.
+ With its variable tilt, the transport
trailer moves on the same level as the
tool to be put on, then the transport
trailer can be easily repositioned
horizontally for completely secure
+ Behind a tractor, a combine harvester
Technical specifications
Multi-purpose
Standard equipment :
!200 x 150 (2.6T.) or 250 x 150 (4.4T.) central beam.
!Floor height in transport position: 0.48m.
!150x100 tubular frame, 40 mm-thick wooden floor.
!Braked 50 or 60 mm square rear axle. (P.T.A.C. : 4000 Kg or 5900 Kg).
!50 or 60 mm square front axle, pivoting on polyethylene ring, Ø 80 reinforced pin.
!Two rear wheels and two front wheels 10.0/75x15.3, 10 plys.
!Transport trailer titled by a stand and a hydraulic cylinder.
! Fully independent hydraulic controls.
! Telescopic hitch tongue with automatic engaging.
! Standard lights. Two tie-down straps for securing
equipment.
Options :
+Cutter bar supports (allowing the transport of a
cutter bar that is longer than the transport trailer)
+Rear steering axle with hydraulic controls.
+Rear ramps for vehicles or small machinery.
Low loader trailers RPE up 5 to 26 t
rt trailer
o
p
s
n
a
r
t
g
in
Tilt
RPE 5
Inside length :
4,50 m - 6,50 m - 7,50 m
+ Trailers
for heavy equipment transports,
such as caterpillar machinery or equipment
not approved for standard road travel.
+ There
are five models available,
with rear tilt assisted by a doubleeffect cylinder or retarder.
RPE 15
Technical specifications
RPE 26
Standard equipment RPE 5 - 8 - 10 - 15 - 20 T :
!Tilting transport trailer, articulated on the axle.
!50 mm-thick wooden floor.
!Tilting system with retarder cylinder or DE.
!Hydraulic braking and park braking system.
!Front stand, hydraulic or mechanical.
!Standard lights.
Standard equipment on RPE 20 and 26 T :
! Fixed transport trailer with tilting section at rear.
! 50 mm-thick wooden floor.
!Hydraulic braking and park braking system.
!Hitch tongue with rubber-suspension (only on RPE 26 T).
! Two anti-roll rear stands.
!Hydraulic front stand.
Option :
+ Outriggers
PERARD SARL
Avenue de l’Europe
Z.I. de Baleycourt
F-55100 VERDUN
Tél: + 33 329 73 73 73
Fax: + 33 329 73 73 74
[email protected]
www.perard.fr
02/07 - Noncontractual photos and data - DC 2_b_Uk