HVB globalTRXnet
Key generation/Initialisation
HypoVereinsbank
Quick Guide
Version 4.5
28 February 2012
2
KEY GENERATION/INITIALISATION HYPOVEREINSBANK
Start HVBglobal TRX net via the favourites of your web browser or alternatively via <Start> <Alle Programs>
<Hypovereinsbank> <HVB global TRXnet>.
Click on <Login> without inserting a password to start the
key management. Then insert the customer- and user ID
received form Hypovereinsbank and choose the key
storage. The chosen key storage has to be accessable at
every login. Confirm with <Next>.
Choose a password and enter it. This password gives you
access to the key file must be inserted at each log-in.
Afterwards click on <Next>.
3
Click <Next> to continue with the key generation.
Generate the keys by moving your mouse in the screen that
is visible until the UniCredit logo is 100% legible. Confirm
with <Next>.
Insert a code letter (prefix) between A and Z and confirm
with <Next>.
To transfer the key to the bank confirm the information with
<Next>.
Each workstation must have a different code prefix!
The initialisation will now take place and the keys will be transferred to the bank.
4
If the processing has been successful the INI/HIA letter will be shown in a new browser tab or browser screen. (Make certain that
your pop-up settings are adjusted). Print the page(s) and after signing, send the document by fax to +49 89 378 33 37094.
The bank will complete the set-up after validating the signature – usually within 60 minutes. Once the bank confirms the setup you may log in successfully to the key storage using the new password.
Imprint
UniCredit Bank AG
Corporate & Investment Banking
Kardinal-Faulhaber-Strasse 1
D-80333 Munich
www.unicreditgroup.eu
Contact & Service Center UniCredit
Cash Management & Electronic Banking
Tel. +49 89 55 299 699
[email protected]
UniCredit Bank AG
Corporate & Investment Banking
www.unicreditgroup.eu
Technical Sales Cash Management
Kardinal-Faulhaber-Strasse 1
D-80333 Munich