Typical internal membrane system using Platon

Typical internal membrane system
using Platon Plasterbase to walls
Drawing No. (I P 019.1)
PLATON PLASTERBASE
6:1:1 RENDER OR SUITABLE PLASTER
OR DOT & DAB PLASTERBOARD WITH
PROPRIETARY BOARD ADHESIVE
75mm (MIN)
REINFORCED SCREED
WALL/FLOOR JUNCTION
OR CORNERSTRIP
UNDERFLOOR
HEATING PIPES
INSULATION
PLATON
MULTI / P5 /
P20
20mm STONE
SLAB
TRITON AQUA CHANNEL
TO DRAINAGE FACILITY
© Triton Systems
All installations to be strictly in accordance with manufacturer’s guidelines
which are set out in the Isola Manual. For any non-standard details,
please contact our technical department on 01322 318830
Triton Systems
Units 3 – 5 Crayford Commercial Centre,
Greyhound Way, Crayford, Kent DA1 4HF
Tel: 01322 318830 Fax: 01322 524017 Email: [email protected]
www.tritonsystems.co.uk
0632 12/11