Honeywell International Inc.
WIN-PAK GX/XE/SE/PE 4.4 B685.5
(With Auto patch 685.5.1)
Release Notes
Copyright © 2016 Honeywell International Inc.. All rights reserved.
This document contains proprietary information of Honeywell International Inc. and is protected by copyright and other international laws.
Reproduction or improper use without specific written authorization of Honeywell International Inc. is strictly forbidden.
Release Notes – WIN-PAK SE/PE/XE 4.1
Table of Contents
1
2
3
Introduction....................................................................................................................................................................... 3
1.1
Purpose ................................................................................................................................................................... 3
Release Notes ................................................................................................................................................................... 3
2.1
Release Details........................................................................................................................................................ 3
2.2
Contents in the DVD ................................................................................................................................................ 4
2.3
Installation Tips ........................................................................................................................................................ 4
2.3.1 Upgrade Preparations ................................................................................................................................. 5
2.3.2 Database Services Upgrade Options: ......................................................................................................... 5
2.3.3 Upgrade on a New Computer ...................................................................................................................... 5
2.3.4 Upgrade on the Same Computer ................................................................................................................. 5
2.3.5 Support Resources – MyWebTech.............................................................................................................. 6
2.4
Highlights ................................................................................................................................................................. 6
2.5
Additional fixed issues ............................................................................................................................................. 8
2.6
Open/Deferred Issues and Limitations..................................................................................................................... 9
2.6.1 WIN-PAK and Regionally Activated Time and Attendance and FIN4000 .................................................... 9
2.6.2 FIN4000 Panel Limitations ........................................................................................................................ 10
2.7
Anomalies and Workarounds ................................................................................................................................. 11
2.8
Deliverables ........................................................................................................................................................... 11
PRO2200/3200 & PW5000/6000 WIN-PAK Compatibility ............................................................................................. 12
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 2 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
1 Introduction
1.1
Purpose
The purpose of this document identifies the contents of the released package including defects fixed, key changes,
compatibility issues, known anomalies, workarounds, etc.
This document corresponds to the release of Build 685.5.1 of WIN-PAK GX/XE/SE/PE 4.4.
2 Release Notes
Product Name:
WIN-PAK GX/XE/SE/PE 4.4
Type of Release
Final Sales Release
Date:
February 26, 2016
2.1
Release Details
Item
Software: WIN-PAK GX/XE/SE/PE
Hardware (including the OS)
Version Number/Type/Make
B685.5.1
 Windows Server 2008, Windows 7, Windows Server 2012,
Windows 8 R2, Windows 10 Professional
 SQL Server 2012 Express comes as default with the installer.
SQL Server 2012 Std (SP3), SQL Server 2008 R2 express and
SQL Server 2008 R2 Std are supported as independent
installations.
 Supports 32 and 64 Bit Editions of OS and SQL Server
 VMWARE 5.5
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 3 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
2.2
Contents in the DVD
This DVD contains more than just the WIN-PAK software. It contains documentation on WIN-PAK as well
as some useful utilities. When you insert the DVD, a menu appears to automatically guide you to the
software documentation, registration link and software installation. If this does not automatically launch,
you can navigate to your DVD using Windows Explorer or Run, and click the Launch.exe file.
Post installation utilities are found by navigating to the DVD’s root, Utilities folder. This folder contains
NetAXS® firmware and instructions, empty WIN-PAK databases, and TWAIN drivers for the PBCAM21
and PBCAM22.
Navigating to the PDF folder, you will find in the language subfolder. You may find it useful to copy one or
more of these manuals to your local hard drive for easy reference. The Userguide.pdf is the full WIN-PAK
manual and the Quick.pdf contains the basic setup and day-to-day information.
2.3
Installation Tips
1. Make sure you have the administrator privileges to install the software.
2. If this is an upgrade, make sure to properly back up your database and also the contents of the Database
folder (C:Program Files (x86)\WINPAKPRO\Database). Review the WIN-PAK release notes on the DVD
before starting the installation. Also, see the Upgrade Optimizations section of this document for optimizing
your upgrade.
3. If you are using the NetAXS access control panels, confirm that the version of firmware meets the
minimum requirements for this WIN-PAK release. The minimum version for NetAXS-4 is 3.4.3 and the
minimum version for NetAXS-123 is 3.4.27. WIN-PAK will not communicate to a NetAXS panel that does
not meet the minimum firmware requirements.
4. To ensure optimum performance when installing a new NetAXS panel on WIN-PAK we recommend that
you “flatten” (hard, DIP switch reset) the NetAXS after the firmware upgrade before you initialize the panel
from WIN-PAK for the first time.
5. Support for MAXPRO NVR 3.5 requires manual installation of the MAXPRO NVR 3.5 driver on the WINPAK server and clients. Driver (MAXPRO NVR 3.5 Driver) available through MyWebTech customer portal
https://mywebtech.honeywell.com . Once you are logged in, navigate to the Download Center -> Video->
MAXPRO VMS-> MAXPRO VMS R300 -> Driver updates.
6. .Net 4.5.1 is not supported for VMS applications – Failed to connect to Trinity rendering Server error will be
generated. Uninstall .Net 4.5.1 and install .Net 3.5 or 4.0 using the following steps:
a. Step 1: Uninstall .Net Framework 4.5.1
b. Step 2: Install from the installation media from the Software\Prerequisites folder the
DotNetFramework3.5SP1 and then the DotNetFramework4.0
c. Note: This will require access to the internet as additional updates will be required to be
downloaded during the installation of the .Net 3.5SP1 and .Net4.0
7. WIN-PAK XE/SE/PE 4.4 supports the following SQL installations:
a. New installations will install SQL 2012 Express as default for the supported languages.
b. Existing installations using SQL2008 R2 (express or full) are supported.
c. Only English SQL upgrade functions are supported from the DVD. Upgrades to 4.4 from WIN-PAK
3.x versions that are using English SQL Server 2008 Express or SQL Server 2008 R2 on the
same computer can be upgraded to SQL2012 Express from the installation disk.
d. If upgrading to a new computer and the previous version is WIN-PAK 3.3 or newer, then the bak
files can be restored on the new WIN-PAK 4.4 computer. Remember to also copy over the
contents of the Database folder (C:Program Files (x86)\WINPAKPRO\Database).
8. Non-English
a. SQL 2005 express and SQL 2008 express upgrades to SQL 2012 express require additional files.
b. SQL 2008 express sites will be prompted during installation to download the SQL 2008 R2 – user
will need to select language from the linked site
c. Upgrades to 4.4 from 3.x versions that is using SQL 2005 express on the same computer will
require the additional SQL versions of the older SQL (downloaded from MS) to upgrade to 2012
express.
d. Upgrades to 4.4 from 3.x versions that is using SQL 2008 express on the same computer and the
customer wants to upgrade to SQL2012 express they will require the additional SQL 2008 R2
version (downloaded from MS).
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 4 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
2.3.1 Upgrade Preparations
If this is an upgrade version of WIN-PAK, there are two different approaches.
1. Installing on a separate/new computer.
2. Installing on the same computer.
In both cases you must:
a) Have administrator privileges to install the software.
b) Properly back up your database and images, and review the WIN-PAK release notes on the DVD
before starting the installation.
c) Obtain the CD Key from your current WIN-PAK by logging on to WIN-PAK and selecting Help >
License. You will need this during the installation of your new WIN-PAK.
2.3.2 Database Services Upgrade Options:
Directly supported upgrades are from build 670.21 and higher. WIN-PAK builds 670.16 and older should be sent
to Honeywell tech support for DB conversion. To start this process, please call technical support at 800-323-4576
option 2 or click on the following link and follow steps 1, 2, and 3 to complete the on-line database services
technical support web request form.
https://www.honeywellsystems.com/ss/techsupp/index.html
Database Services
WIN-PAK Upgrade
Part Number
WIN-PAK database upgrade 7 – 10 day lead time *
SRVBDUPNC
WIN-PAK database upgrade 1 day lead time *
SRVDB1DAYNC
WIN-PAK database upgrade 2 day lead time *
SRVDB2DAYNC
* Based on Honeywell business days
2.3.3 Upgrade on a New Computer
Upgrading WIN-PAK to a new computer is as simple as performing a new install of WIN-PAK using the CD
Key from your existing installation; and then using WIN-PAK’s Backup and Restore feature, restore your
backup on the new WIN-PAK computer making sure to not only restore the database but also copy any
floor plans or badging information from the “C:Program Files (x86)\WINPAKPRO\Database” folder. To
complete the license transfer, you will need to go online and register your new installation to receive the
License Key.
Split installs of SQL Server and a WIN-PAK application Server:
If the database comes from an earlier version of WIN-PAK 670.xx, the database needs to be restored
locally with the B&R before being restored over to SQL Server Cluster or standalone instance of SQL.
2.3.4 Upgrade on the Same Computer
There are two ways to install the WIN-PAK upgrade on the same computer:
1. Direct installation on top of the existing WIN-PAK, which is adequate for most access control only
installations. WIN-PAK discovers and uses the existing license keys.
2. Uninstall the old WIN-PAK and if needed the old database engine and perform a full installation of the
new WIN-PAK.
This release supports SQL 2008 and SQL 2012. If your database engine is not supported you must
uninstall the old database engine before upgrading. You must know the SQL Server user name and
password to complete the upgrade for supported database engines.
The installation using video integration must follow the second approach. You must uninstall WIN-PAK
first, and then re-install using the previously obtained CD Key
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 5 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
2.3.5 Support Resources – MyWebTech
MyWebTech | Customer Portal https://mywebtech.honeywell.com/
 How-To Video’s
 Knowledgebase
 View Cases
 Submit Technical Questions
 Review Database Service Status
2.4
Highlights
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Windows 10 support
AES 256 encrypted communication supported on NetAXS panels with latest firmware.
Software security prompts and requires the user to change default admin password during initial log on.
Tracking and Mustering reporting related functionality (from WIN-PAK 4.1)
a. Enhanced Tracking and Mustering reporting functionality
b. New Tracking and Mustering Report Template
c. Emergency Printing of T&M Report using Menu Item, Tool bar Icon and Hot Key combo
d. Printing of T&M Report using the Command Files (only Windows 2008 and Windows 7)
Galaxy integration related features
a. Galaxy only license added (WIN-PAK GX)
b. Galaxy User Management
c. Reworded “Privileged” in the card database to “Arming and Disarming Allowed” with Galaxy
functionality changes:
 Galaxy, valid card disarms/arms when “Arming and Disarming Allowed” is checked.
 Vista only disarms on any valid card read allowing access.
 Vista only arms on 3-valid card read when “Arming and Disarming Allowed” is checked
Extended the Card Holder name fields from 30 to 35 characters
Report Preview and Generation in HTML format, System Config, Print settings
Expanded PIN to 10-digits for PRO3000 panels (APAC – Regional feature)
Enhance History Report - provides the user code (Name) in the History Report for arm/disarm operation
License box provides extended license information about supported functionalities
Auto-Patch installation feature installs patches found in the WPPatches and VMSPatches folders of the
installation media
Galaxy Intrusion updates – Option is Regionally activated
1. Prerequisites:
a. Galaxy Dimension (GD-48, GD-96, GD-264 and GD-520) FW: V6.92
b. Galaxy Ethernet Module E080-4 FW: 3.05
c. Ethernet network
2. WIN-PAK Galaxy Edition (GX)
a. Galaxy only Edition – Stripped down menu items Galaxy related items only
b. Galaxy Edition will not have Guard Tour Service, Tracking & Mustering Service and Video
management service
c. Auto addition of Servers at GX first login
d. With support for the Galaxy panel in the License and Unregistered, the Demo Mode will not allow
more than 5 Card Holders and 2 Galaxy panels
3. Communication enhancement
a. Communication per communication server possible up to 50 Galaxy panels
i. Limited per CD Key license (eg WIN-PAK SE will allow up to 50 panels)
ii. Limited to 65000 WIN-PAK events in one hour, 50 GD panels with 6000 groups/zones
iii. Test performance generated 55000 Galaxy alarms/hour & 10000 NetAXS alarms/hour.
1. 8 GB RAM was used & automatic memory allocation settings has been used to
enable consumption of physical memory as RAM when required.
2. WIN-PAK communication server not crashed even though its memory reached
1070MB. And Memory got reduced if we acknowledge & clear the alarms.
iv. It is recommended to use physical servers for WIN-PAK with such load requirements,
virtual machines has limitations in sustaining communication server connection in loaded
conditions
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 6 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
4.
5.
6.
7.
v. “Never ON” Time zone can be configured of low priority zones. (It will reduce the number
of alarms received by WIN-PAK)
vi. DB maintenance & services restart to be performed monthly for maintaining
communication server stable.
vii. Alarm window & Control map can be closed if operator not working on these windows.
b. Galaxy devices communication speed improvements
i. Faster status updates in polling sequences (up to 7 poll cycles per minute)
ii. Faster Arming and disarming control and feedback from WIN-PAK (command in 10
seconds executed)
c. Output control enhanced
i. Faster control and feedback per output
ii. Correct control for outputs on RIO 214, 215 and RIO 300 to 415
iii. In Panel ADV, all output commands have a faster response.
Floorplan and Control map enhancements
a. Floor Plan enhancements
i. Galaxy Floor Plan Icons and associated Devices viz., Input, Output, Galaxy Zone & Group,
Galaxy Output have been improved, selection of multiple icons for various Galaxy devices
b. Galaxy Groups have new actions
i. Group Reset and Abort Set
ii. Same action will be reflected in the Control Map, Floor Plan, Alarm View and Command
Files
c. Galaxy Devices in the Control Map and Floor Plan Showing only the appropriate action
i. from the Right Click Menu
Galaxy User Management
a. New menu created for Galaxy user management
i. Part of Card Holder (GX) or Card (SE/PE) menu
ii. Galaxy > User Management
iii. Galaxy > Duplicate users
b. New Galaxy user overview window
i. Win-PAK Card holder vs Galaxy panels relationships
ii. Filter first, last name
iii. Indication of failed uploads to Galaxy panels
iv. Manage user, copy, remove panels, remove card holder
v. Indication of update success to Galaxy panels
c. User management (from Galaxy User management window OR Card holder tab)
i. User name, Pin code, Galaxy card : local or unique for complete system
1. Including duplication check over all installed panels
ii. User level, quick / full menu
iii. Group assignment, Group choice, Galaxy card can be used at DCM reader to (dis-)arm
iv. Select preconfigured schedules and access templates.
v. Resend checkbox (highlighted when upload to Galaxy failed)
d. All modifications sent immediately to Galaxy panels
i. Notification of successful upload in WIN-PAK log and event window
ii. Notification of failed upload in WIN-PAK log and event window
1. Indication of failed upload to Galaxy panels in event and alarm window
2. Indication of failed upload to Galaxy panels in Galaxy User management window
3. Retry per schedule
4. Retry per manual operator action
Synchronization with Galaxy:
a. Added schedules and access template
b. Added question if Galaxy user names need to be incorporated after synchronization
i. Import of the Galaxy names to card holders
ii. Import all user properties.
Set up of Galaxy ADVs devices
a. Auto installation of Communication server, Command File server and Schedule server
b. Galaxy Panel, Groups, Zones, Outputs, RIOs automatically configured
c. Zone Naming Conventions – easy look up and find ADV actions in Floor plans, control maps and
reports
d. Normal intrusion Galaxy zones are now by default in never on reporting timezone (only report
when group is disarmed).
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 7 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
8.
9.
10.
11.
12.
13.
1.
2.
3.
4.
5.
6.
e. Galaxy Panel, Entry/Exit Zone Configuration will be checked or unchecked according to zone
Type, to ignore entry / exit / final zones in the attempt to arm from WIN-PAK or 3-swipe from
non-Galaxy access reader
Galaxy Panel, Date & Time Synchronization with SIA commands (no more polling stops)
a. Galaxy panel right click menu
b. Part of Time Synchronization schedule
Set up user names from Galaxy as WIN-PAK card holders:
a. First name – programmed Galaxy user name,
b. Last name – name of panel
New Schedule for Galaxy panels
a. Resend failed uploaded user modifications and deletions to Galaxy panels
b. This schedule needs to be configured up manually in the time management > Schedules menu
Enhanced Galaxy Log report
a. Reporting combined Galaxy Log report and WIN-PAK event log
b. Panel Log update manually from the Galaxy log report filters
Triple swipe to arm / disarm in WIN-PAK SE / PE 4.4 (Privileged card)
a. Reworded “Privileged” in the card database to “Arming and Disarming Allowed”
b. “Arming and Disarming Allowed” activated had changed functionality:
i. Valid access card can 3-swipe to attempt to arm Group connected to the reader
1. This will be reported as ATTEMPT TO ARM FROM READER YY BY
CARDHOLDER XX alarm in WIN-PAK in the Group ADV
ii. Valid access card can single swipe to attempt to disarm Group connected to the reader
1. This will be reported as ATTEMPT TO DISARM FROM READER YY BY
CARDHOLDER XX alarm in WIN-PAK in the Group ADV
iii. Any card with the “Arming and Disarming Allowed” deactivated will not arm or disarm the
group, but will open the door per the access level (regardless of group armed or
disarmed).
c. Enhance Reporting functionality – Provided the user code (Name) in the History Report for
arm/disarm operation (3 x swipe arming via access reader)
Deleting a cardholder from WIN-PAK when a Galaxy user code is attached
a. Popup window will ask for deletion of Galaxy user codes
b. After confirmation immediately updated in Galaxy panels
FIN4000 Panel – Option is Regionally activated
Full integration of the FIN4000 Panels: HON FIN4000-10K, HON FIN4000K-10K and HON FIN4000K-20K
Download of all the configuration, Time zone, Access Levels, Holidays, Users/Fingerprint, Inputs and
Outputs
Enrollment of the Fingerprint for the Card Holder through FIN4000 ENROLL and HON FIN4000K-20K,
HON FIN4000K-10K , HON FIN4000-10K
Auto Download of the Access Levels and Users/Fingerprints on the Access Level Changes
All FIN4000 panels support External Readers as the secondary Readers
License to support maximum of 255 FIN4000 panels per Communication Server
Time and Attendance Module for the WIN-PAK – Option is Regionally activated (no Windows 10 support)
1. Time Attendance to support various configuration: Employee, Department, Holiday, Leave, On Duty, Shift,
Shift Rotation, Attendance Correction
2. Time and Attendance to generate/show/export various Attendance and other reports
3. Time and Attendance supporting scheduled reports
4. Time and Attendance to support all the Honeywell Access Panels for the calculations
2.5
Additional fixed issues
1. DB limits and capacity restrictions in 4.0 are not maximized for 10GB SQL Server 2012 Express Edition
2. Disarm commands sent repeatedly after the partition is in “disarm” state.
3. PRO3200 Card and PIN application where Host Grant is used. Card Downloaded event reports in WINPAK on each card swipe & relay output energized.
4. Card and Card Holder unable to select a note field and enter “search for" detail
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 8 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
5. Showing Incorrect Password events & PRO-3200 Panel initialization fails when Encryption enabled on FW
2.6.5 (396)
6. Workstation Defaults - Restore Windows setting is not working for the operator
7. WIN-PAK API compatibility for Microsoft Updates KB3057154, KB3088195, KB3060716, KB3061512,
KB3067505, KB3080149, KB3071756
8. Custom Access Level and update delay times
9. Custom access level latency issues with large database
10. NX-4 and Multiple Access Level affected by host grants
11. Downstream NetAXS panel AL change not download to panel
12. Italian OS, error 13 'Type Mismatch' date/time conversion is wrong in code.
13. Action message strings for Fusion and Galaxy Devices are always displayed in English text for installation
upgrades using B& R utility
14. Activating RIO outputs 214 and higher does not work from the control map
15. User Level Triggers in Card record can be changed by an operator with view permissions
16. When a Group/Partition is unset/disarm with single swipe of card, multiple unset command is sending from
WP
2.6
Open/Deferred Issues and Limitations
2.6.1 WIN-PAK and Regionally Activated Time and Attendance and FIN4000
1. Uninstallation of WIN-PAK 685.5 not removing the Time& attendance shortcut icon
2. WIN-PAK 685.5 installation completes before installation of Auto patch 685.5.1 is completed (requires 5
min additional to complete the installation for Time and Attendance activation).
3. Employee name came as ALL in Leave, On Duty and Attendance Correction Report on Export
4. On Modify/create Expiration date on CardHolder-Fingerprint tab data is not autodownloading
5. On Editing the Supervisor in Update Supervisor - Username not coming in mail
6. Unnamed file exception while discovering FIN4000 device.
7. In Report schedule selected employee shows duplicate record after report executed
8. FIN4000 Input/Output/Reader ADV's name by default displays Reader
9. WINPAKPRO_TA_LOAD CREATE file failed to install automatically during 685.5.1 patch installation
10. In ShiftAllocation - no validation for selecting shift
11. Forgot/ Change Password Alert message Issue, not move to the homepage
12. Installation issues after uninstallation
13. HONFIN4000 Config utility shortcut icon is not uninstalled.
14. LDAP login is not working in WIN server 2012
15. Installation of B685.5 with standard sql 2012 failed to create WPUSER with user given password
16. WIN-PAK upgrade failed to create WPUSER and installation aborted
17. Custom Wiegand option is not working in HID ,Iclass card layout tab
18. New Employee addition failed when joining date is on December month
19. "ALL" option in configuration is not working in edit mode
20. T&A Home page Login button not firing when i hit ENTER button
21. Leave cannot be applied for 2.5 day if there is a 3rd day onduty is already applied
22. Unrelated error is observed during WIN-PAK login after license upgrade from SE-PE
23. "Report Generated by" should be removed from scheduled report
24. WIN-PAK UI is not establishing the connection for valid credentials Randomly observed
25. T&A should not allow Valid password after account locked for specified invalid login time
26. Carry forwarded Earn leave should be accumulated with previous earn leave balance
27. In WIN-PAK UI, windows positions are changed when an operator launches a new session with LDAP
login which are opened during the previous session
28. Location change for Employee will not update leave balance as per the new location leave balance
29. Dashboard status taking more time to load
30. Maximum of 5 sec delay in output activation when the operation mode is in double mode
31. Sorting Biometric userID in credential holder disappears credential holder records
32. T&A web application performance is very low in local machine
33. Email address Special character validating but not restricting the user to enter in SMTP settings
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 9 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
34. T&A application is unavailable during bulk card holder import/addition
35. SDK_LIMITATION: The Messages and the Code for the failed Events from the Device/SDK are so abstract
that it is difficult to get the real cause of the Event
36. Drag FIN4000 device and drop from one com server to another device goes to not responding mode
37. FIN4000k-10k&FIN4000-10K goes unknown after continuous reconnect and disconnect and also not
disconnecting/reconnecting properly in long run
38. Credential holder operator level as view not showing edit button
39. FIN4000 Output status in control map not changing after valid swipe
40. DEVICE_LIMITATION: Duplicate finger not validating if user enroll same finger for both 1st and 2nd Finger
41. Panel, inputs, outputs goes unknown states if user delete respective ADV's and create again
42. Max limit input Shunt time warning message displays twice
43. Time zone name in FIN4000 device is haphazard if WP TZ name is in numeric
44. Operator able to clear the NetAXS Panel alarms even if it’s in alarm state when "Clear Alarm on Normal
Only" Enabled
45. Different Galaxy User with Same Name are listed Under one Card Holder Name
46. Default String for "USER" is Changed in Non English OS
47. Failed to connect to VMS Server from WIN-PAK Remote UI + Comm Server installed Machine
48. Language Translation Not Happened in Dutch OS During Installation
49. Not able to create a Galaxy user without PIN number
50. Never On Blocks Fault/Trouble Alarm as Well
51. 128 AL Check Message displaying wrongly on WP 4.4 B 685.4.1 installed machine where only one AL
present
52. WIN-PAK showing as Demo, Working as like Demo mode only even though licensed it after few days and
this is observed in 2 test beds randomly
53. Polish Language Translation Issue
54. UI Crash Occurred while using Download LogData in Galaxy Panel
55. 1Panel GX License allows 2 GD Panel and NetAxs Panel In DB restore Scenario
56. Detailed View Option is not Working
57. Vista panel responding to arming and disarming control command to vista partition from control map, but
the status of the partition devices were not updating in WP 4.4 Build 685.1 as per the control command.
58. Starting services progress window not stopping/closing down after installing some components of NVR
Driver 3.5 Build 332 Rev F over WP 4.4 Build 685.1
59. If user selects print preview option in report section, WP generating two report windows.
60. Tracking and Mustering report not showing its branch readers as configured in Tracking And Exit area
61. In view only operator permission, WP allowing operator to remove card holder from galaxy user
management window.
62. User Info is Deleted in User Management and Not in Panel.
63. Access Level is disappearing from card while swiping it to the reader, If limited number of uses enabled for
the card
64. Com server not turning its state to online if com server configured with "machine IP" in Machine name field.
65. P-Series panels will are not supporting RS232 connection applications.
66. Schedules are affected by Day Light Saving changes. Schedules will adjust and roll back or ahead.
67. WIN-PAK Dialogue window appears behind the user management
2.6.2 FIN4000 Panel Limitations
1. FIN4000 Output status in the control map is not changing after a valid presentation
2. Duplicate finger is not validating if user enrolls same finger for both 1st and 2nd Finger. The FIN4000
doesn’t have the capability to detect the Duplicate among multiple fingers registered for the same user
3. Double mode, Timed APB functionalities are not working for external readers. All the settings are related
and apply only to the Internal Reader of the FIN4000 Panels
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 10 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
2.7
Anomalies and Workarounds
1. NetAXS-4 using RS-232 and encryption enabled will not communicate with WIN-PAK. Workaround,
ensure that the encryption on the panel is not enabled as that configuration is not supported by WIN-PAK.
2. Importing Arabic names using the WIN-PAK Import Utility can show ???. Workaround.
c. Stop all the WIN-PAK Services
d. Execute the below query in SQL Management Studio
ALTER DATABASE [WIN-PAK Pro] SET multi_user WITH ROLLBACK IMMEDIATE;
ALTER DATABASE [WIN-PAK Pro] COLLATE Arabic_CI_AS;
e. Now Start all the WIN-PAK Services
f. Now Open the WIN-PAK Import Utility to import the Data from Excel/CSV File.
2.8
Deliverables
1.
2.
3.
4.
5.
WP_GX_XE_SE_PE_RELEASE_4.4_685.5– Installation Media for B685.5.1
WIN-PAK_GXXESEPE_4.4_User_Guide.pdf – User Guide for the WIN-PAK
WIN-PAK_GX_4.4_User_Guide.pdf – User Guide for the WIN-PAK Galaxy Only
WIN-PAK_GXXESEPE_4.4_TA_User_Guide.pdf – User Guide for the WIN-PAK Time and Attendance
Readme.txt - First Time Installation and Troubleshooting tips for the WIN-PAK Time and Attendance
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 11 of 12
Release Notes – WIN-PAK SE/PE/XE 4.1
3 PRO2200/3200 & PW5000/6000 WIN-PAK Compatibility
WIN-PAK 4.0 and Higher
PRO22R1
PRO22R2
PRO22IN
PRO22OUT
PRO32R1
PRO32R2
PRO32IN
PRO32OUT
PW5K1R1
PW5K1R2
PW5K1IN
PW5K1OUT
PW6K1R1E
PW6K1R2
PW6K1IN
PW6K1OUT
PW5K1R2
PW5K1IN
PW5K1OUT
PW6K1R1E
PW6K1R2
PW6K1IN
PW6K1OUT
PRO22IC
(8 downstream)
PRO32IC
(16 downstream)
PW5K1IC
(32 downstream)
PW6K1IC
(32 downstream)
WIN-PAK 3.3 Build 670.21 or lower
CS 4.2 Build 1017.33 or lower
PRO22R1
PRO22R2
PRO22IN
PRO22OUT
PRO32R1
PRO32R2
PRO32IN
PRO32OUT
PW5K1R1
PRO22IC
(8 downstream)
PRO32IC
*as PRO22IC
(8 downstream)
PW5K1IC
(32 downstream)
PW6K1IC
(32 downstream)
Note 1: Reader, Input, and Output addresses on the PRO3200 panel are labeled starting
with address 0. This translates to address 1 in the WIN-PAK per the example below
PRO3200 Device
Reader\ Input\ Output
PRO3200 Address
0
WIN-PAK Address
1
Note 2: The SIO board ports for a PRO32IC in WIN-PAK are ports 4 and 6; port 6 is set
as the default. These are labeled as ports 2 and 3 on the panel.
Copyright © 2016 Honeywell International Inc.. All rights reserved.
Revision 2
Page 12 of 12