Cleanroom
Features
• Low profile shape re-establishes
flow at 9" below the ceiling
instead of 30+ inches as with
standard teardrop luminaires.
• Ends are sealed by high
temperature die-cut silicone
gasket to eliminate air gaps and
light leaks.
• Extruded aluminum, steel, or
stainless steel housing with
formed endplates.
• Extruded acrylic lens with internal
prisms allow for undisturbed
laminar air-flow, glare control and
a direct/indirect light distribution
resulting in uniform ceiling
luminance.
• Fits 2" screw slot grid T.
• Units are available in a variety of
lengths and can be row mounted
to adapt to any room size.
• Conforms to FED STD 209E.
Airelume IV
• Certified to meet UL 1598
standards for damp location.
Laminar Flow
• No external hardware.
Product Availability
Lamp
Type
81-14W
82-17W
81-21W
82-25W
81-28W
82-32W
81-28W
82-32W
81-28W
82-32W
81-28W
82-32W
Luminaire Length
24"
24"
36"
36"
48"
48"
96"
96"
144"
144"
192"
192"
No. of
Lamps
1
1
1
1
1
1
2
2
3
3
4
4
Airelume IV is a teardrop shaped
luminaire designed to reduce disturbance
and allow laminar air flow around fixtures.
Note: For technical information or
codes and classifications, see
PDFs Tech1-Tech5 online.
Dimensions
5"
4"
2" (50.8 mm)
.91"
4.37"
(111 mm)
B
C
(2) 218" Dia. K.O. in Top of Housing
O.A. Length
Row Mount/Feed-Thru (optional)
Snap In Wire Terminal
For Thru Wiring
Set Screw Secure End
Plate from Inside
Luminaire
Set Screw Secure Internal
Fixture Joiner for Continuous
Rows Inside Luminaire
Extruded Snap In Acrylic Lens
Extruded Acrylic Lens
Green Product Choice: PA82041
/
Housing Material
Options
Luminaire Length
PA – Painted
Aluminum
WS – White Cold
Roll Steel
SS – Stainless
Steel
02 – 24"
03 – 36"
04 – 48"
08 – 96"*
12 – 144"*
16 – 192"*
Note: When Feed-thru wiring and emergency battery are required.
Specify whether switched or unswitched.
*Aluminum only
Voltage
Lamp Type
81 – T5
82 – T8
Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
www.philips.com/luminaires
Airelume_IV 04/13 RMC – Row Mount, Center
RME – Row Mount, End Fixture
RMEJ – Row Mount, End Joiner
FF – Fast Acting Fixture Fuse, Buss GLR
SFF – Slow Blow (Fusetron) Fuse, Buss, GMF
FW – For Feed-Thru Wiring
1 – 120V
2 – 277V
3 – 347V
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008