Acetone - Industrial
2010-08-23
Identified Industrial Generic Exposure Scenarios (GESs) of Acetone
GES No.
EC No.
CAS No.
1
Subsector
Manufacture,
Processing and
Distribution of
substances and
mixtures
Main SU
All
Industrial
Uses
(SU3)
Description
PROC
ERC
PROC1,
ERC1,
PROC2,
Manufacture, Processing (see
ERC2,
PROC3,
examples below1), Formulation and
ERC4,
PROC4,
Distribution of the substance or
ERC6a
PROC5,
mixtures. Includes recycling/ recovery,
PROC6,
material transfers, storage,
PROC8a, ERCs are
maintenance and loading (including
to be
PROC8b,
marine vessel/barge, road/rail car and
PROC9, checked
bulk container), sampling and
PROC10, with the
associated laboratory activities
PROC14, ECT tool
PROC15
Acetone
200-662-2
67-64-1
x
ERC4
2
3
4
5
Use in laboratories
Uses in Coatings
Use as binders
and release
agents
Rubber production
and processing
All
Industrial
Uses
(SU3)
ERCs are
Use of the substance within laboratory
PROC10,
to be
settings, including material transfers
PROC15
checked
and equipment cleaning
with the
ECT tool
x
+
PROC19
All
Industrial
Uses
(SU3)
Covers the use in coatings (paints,
inks, adhesives, and production of
textiles, etc) including exposures
during use (including materials receipt,
storage, preparation and transfer from
bulk and semi-bulk, application by
spray, roller, spreader, dip, flow,
fluidised bed on production lines and
film formation) and equipment
cleaning, maintenance and associated
laboratory activities.
x
+
PROC1,
PROC2,
PROC3,
PROC4,
PROC7,
PROC8b,
PROC9,
PROC15,
PROC19
All
Industrial
Uses
(SU3)
PROC1,
PROC2,
PROC3,
ERC5
PROC4,
Covers the use as binders and release
PROC5,
ERCs are
agents including material transfers,
PROC6,
to be
mixing, application (including spraying
PROC7,
checked
and brushing), mould forming and
PROC8a,
with the
casting, and handling of waste.
PROC8b,
ECT tool
PROC9,
PROC10,
PROC13
x
All
Industrial
Uses
(SU3)
PROC1,
PROC2,
PROC3,
ERC6d
PROC4,
PROC5,
Manufacture of tyres and general
rubber articles, including processing of PROC6, ERCs are
to be
PROC7,
raw (uncured) rubber, handling and
mixing of rubber additives, vulcanising, PROC8a, checked
PROC8b, with the
cooling and finishing.
PROC9, ECT tool
PROC10,
PROC13,
PROC14
x
ERC4
PROC5,
ERCs are
PROC8a,
to be
PROC10,
checked
PROC13
with the
ECT tool
1/36
Acetone - Industrial
GES No.
EC No.
CAS No.
6
7
Subsector
Polymer
manufacturing
Polymer
processing
2010-08-23
Main SU
ERC
Acetone
200-662-2
67-64-1
All
Industrial
Uses
(SU3)
x
All
Industrial
Uses
(SU3)
PROC1,
PROC2,
PROC3,
ERC6d
PROC4,
Processing of formulated polymers
including material transfers, additives PROC5,
PROC6, ERCs are
handling (e.g. pigments, stabilisers,
to be
PROC8a,
fillers, plasticisers, etc.), moulding,
curing and forming activities, material PROC8b, checked
PROC9, with the
re-works, storage and associated
PROC10, ECT tool
maintenance.
PROC13,
PROC14,
PROC15
x
PROC1,
PROC2,
PROC3,
ERC4
PROC4,
PROC5,
ERCs are
PROC7,
to be
PROC8a,
checked
PROC8b,
with the
PROC9,
ECT tool
PROC10,
PROC13,
PROC19
x
Use in Cleaning
Agents
All
Industrial
Uses
(SU3)
10
Use in Oil field
drilling and
production
operations
All
Industrial
Uses
(SU3)
Blowing agents
All
Industrial
Uses
(SU3)
Mining chemicals
All
Industrial
Uses
(SU3)
12
PROC
PROC1,
PROC2,
PROC3,
ERC6d
Manufacturing of formulated polymers PROC4,
including material transfers, additives PROC5,
PROC6, ERCs are
handling (e.g. pigments, stabilisers,
to be
PROC8a,
fillers, plasticisers, etc.), moulding,
curing and forming activities, material PROC8b, checked
PROC9, with the
re-works, storage and associated
PROC10, ECT tool
maintenance.
PROC13,
PROC14,
PROC15
9
11
Description
Covers the use as a component of
cleaning products including transfer
from storage, pouring/unloading from
drums or containers. Exposures during
mixing/diluting in the preparatory
phase and cleaning activities
(including spraying, brushing, dipping,
wiping, automated and by hand),
related equipment cleaning and
maintenance.
ERC 4
PROC1,
PROC2,
ERCs are
PROC3,
to be
PROC4,
checked
PROC8a,
with the
PROC8b
ECT tool
ERC4,
PROC1, (ERC10a)
PROC2,
Use as a blowing agent for rigid and
PROC3, ERCs are
flexible foams, including material
to be
transfers, mixing and injection, curing, PROC8b,
PROC9, checked
cutting, storage and packing
PROC12 with the
ECT tool
ERC8d
PROC1,
Covers the use of the substance in
PROC2,
extraction processes at mining
PROC3, ERCs are
operations, including material
to be
PROC4,
transfers, winning and separation
PROC5, checked
activities, and substance recovery and
PROC8b, with the
disposal.
PROC9 ECT tool
Covers the use as a component of
cleaning products including transfer
from storage, pouring/unloading from
drums or containers.
1
Examples for processing:
use as intermediate,
use as monomer etc.
use as solvent,
use for the manufacturing of resins
2
Polymer Examples:
FRP, UV, VE
x
x
x
Please note also: PC's and AC's are only for comsumer.
For checking ERC's please use the respective environmental calculation tool (ECT) ECT Acetone or
ECT Phenol or ECT Cumene or ECT AMS or ECT ACP
2/36
Acetone - Industrial
2010-08-23
Identified Industrial PROCs
PROC No.
EC No.
CAS No.
Acetone
200-662-2
67-64-1
PROC1
x
PROC2
x
PROC3
x
PROC4
x
PROC5
x
PROC6
x
PROC7
x
PROC8a
x
PROC8b
x
PROC9
x
PROC10
(2 uses)
x
PROC12
x
PROC13
x
PROC14
x
PROC15
x
PROC19
x
Sum
16
3/36
CSR-Worker-Acetone-ind \ Identification
2010-08-23
Industrial Processes relevant for Acetone and Acetone containing products
Generic Exposure Scenario:
Substance specific information
Substance
CASnr
Substance volatility:
TRA volatility range
physical property
Section 1
Exposure Scenario
Processes, tasks, activities covered
Life Cycle Stage / Sector of Use
Applicable Use Descriptors
(PROC or PC)
Applicable Use Descriptors
Default Operational Conditions
Product characteristics
Acute Hazard
General measures
concentration of substance in product
physical form of product
frequency and duration of use
other Operational Conditions of use
67-64-1
233 hPA
high
liquid
Reference Values
DNEL worker - inhalation (long term)
DNEL worker - inhalation (short term)
DNEL worker - dermal (long term)
500
0
186
ppm
ppm
mg/kg/day
Exposure Scenario Title
Main sector of Use: SU3 = All Industrial Uses
All Industrial Processes relevant for Acetone and Acetone containing products.
SU3 = All Industrial Uses
PROC1, PROC2, PROC3, PROC4, PROC5, PROC6, PROC7, PROC8a, PROC8b, PROC9, PROC10, PROC12, PROC13, PROC14, PROC15,
PROC19
ERCs and local conditions are to be checked with the Excel tool ECT Acetone
R phrases: 11-Highly flammable, 36-Irritating to eyes, 66-Repeated exposure may cause skin dryness or cracking, 67-Vapours may cause
drowsiness and dizziness
Locate bulk storage outdoors [E2]
Use suitable eye protection [PPE26]
If repeated and/or prolonged skin exposure to the substance is likely, then wear suitable gloves tested to EN374 and provide employee
skin care programmes [PPE20]
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied
or removed by a powered fan. [E1]
Covers percentage substance in the product up to 100 % (unless stated differently) [G13].
Liquid, vapour pressure > 10 kPa [OC5].
Covers daily exposures up to 8 hours (unless stated differently) [G2]
Assumes a good basic standard of occupational hygiene is implemented [G1]. ;
4/36
Industrial Processes relevant for Acetone and Acetone containing products
CSR-Worker-Acetone-ind \ Identification
Section 2
Section 2.1
Product characteristics
Amounts used
Frequency and duration of use
Other Operational Conditions of use affecting
environmental exposure
Technical onsite conditions and measures to
reduce or limit discharges, air emissions and
releases to soil
Organisation measures to prevent/limit release
from site
Conditions and measures related to municipal
sewage treatment plant
Conditions and measures related to external
treatment of waste for disposal
Conditions and measures related to external
recovery of waste
Other environmental control measures additional
to above
Section 2.2
Section 3
3.1. Health
3.2. Environment
Section 4
2010-08-23
Operational conditions and risk management measures
Control of environmental exposure
substance is a unique structure, ketone, readily biodegradable
Annual site tonnage (tonnes/year): please use the Excel-Tool 'ECT Acetone' to calculate your maxium tonnage/year
Emission Days (days/year): 360d/y
Indoor/Outdoor use
Common practices vary across sites thus conservative process release estimates used.Typical technical measures are closed systems or scrubbers
or charcoal adsorbers.Typical onsite offgas treatment technology provides removal efficiency of 90 %
Common practices vary across sites thus conservative process release estimates used. Please use the Excel-Tool 'ECT Acetone' to check your
local conditions.
Please use the Excel-Tool 'ECT Acetone' to check your local conditions.
External treatment and disposal of waste should comply with applicable regulations
External treatment and disposal of waste should comply with applicable regulations
none
Control of worker exposure
see chapter RMMs
Exposure Estimation
GES Worker Chemical Safety Assessment (CSA) Template
http://cefic.org/templates/shwPublications.asp?HID=750
ECT Acetone
http://www.reachcentrum.eu/EN/consortium-management/consortia-under-reach/phenol-derivatives-reach-consortium.aspx
Guidance to check compliance with the Exposure Scenario
4.1. Health
Guidance is based on assumed operating conditions which may not be applicable to all sites; thus, scaling may be necessary to define appropriate
site-specific risk management measures.
4.2. Environment
Guidance is based on assumed operating conditions which may not be applicable to all sites; thus, scaling may be necessary to define appropriate
site-specific risk management measures.
5/36
CSR-Worker-Acetone-ind \ RMMs
Generic Exposure Scenario:
No
1
SU 3 /
Use Descriptor (PROCs) SU 22
PROC 1 - Use in closed
Industrial process, no likelihood of
SU3
exposure
Industrial Processes relevant for Acetone and Acetone containing products
Industrial Processes relevant for Acetone and Acetone containing
products
Contributing Scenario
General exposures (closed
systems) [CS15].
Operational Conditions
& typical RMMs
(closed systems) [CS107].; Process
sampling [CS2]. ;
0
2010-08-23
Risk Management Measures (RMMs)
adviced under REACh
Sample via a closed loop or other system to avoid exposure [E8].; Handle substance within a closed system [E47].
PROC 2 - Use in closed,
continuous process with
occasional controlled
exposure
PROC 3 - Use in closed
batch process (synthesis or
formulation)
Industrial SU3
General exposures (closed
systems) [CS15].
Continuous process [CS54]. ;
Process sampling [CS2].
0
Sample via a closed loop or other system to avoid exposure [E8].; Handle substance within a closed system [E47].
Industrial SU3
General exposures (closed
systems) [CS15].
Batch process [CS55].
Process sampling [CS2].
0
Sample via a closed loop or other system to avoid exposure [E8].; Handle substance within a closed system [E47].
PROC 4 - Use in batch and
other process (synthesis)
where opportunity for
exposure arises
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 6 -Calendering
operations
Industrial SU3
Process sampling [CS2]. ;
(open systems) [CS108]
0
0
Industrial SU3
Mixing operations (open
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
Industrial SU3
Calendering (including
Banburys) [CS64]
0
0
7
PROC 7 -Industrial
spraying
Industrial SU3
Spraying/fogging by
with local exhaust ventilation [CS109] 0
machine application [CS25].
Ensure material transfers are under containment or extract ventilation [E66]. 8
PROC 7 -Industrial
spraying
Industrial SU3
Spraying/fogging by
0
machine application [CS25].
0
Ensure operation is undertaken outdoors [E69]. 9
PROC 7 -Industrial
spraying
Industrial SU3
Spraying/fogging by
0
machine application [CS25].
0
Wear a respirator conforming to EN140 with Type A filter or better. [PPE22]
10
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8b -Transfer of
chemicals from/to vessels/
large containers at
dedicated facilities
Industrial SU3
Bulk transfers [CS14].
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
0
Industrial SU3
Bulk transfers [CS14].
Dedicated facility [CS81];
Transfer from/pouring from
containers [CS22].
0
2
3
4
5
6
11
6/36
Industrial Processes relevant for Acetone and Acetone containing products
CSR-Worker-Acetone-ind \ RMMs
Generic Exposure Scenario:
No
12
13
Use Descriptor (PROCs)
PROC 9 -Transfer of
chemicals into small
containers (dedicated filling
line)
PROC 10 - Roller
application or brushing
Industrial Processes relevant for Acetone and Acetone containing
products
SU 3 /
SU 22
Industrial SU3
Operational Conditions
Contributing Scenario
& typical RMMs
Small package filling [CS7]. Dedicated facility [CS81];
0
Pouring from small containers [CS9].
Industrial SU3
Rolling, Brushing [CS51].
Or: Equipment cleaning and
maintenance [CS39].
0
Industrial SU3
Equipment cleaning and
maintenance [CS39].
0
0
Risk Management Measures (RMMs)
adviced under REACh
14
PROC 10 - Roller
application or brushing
15
PROC 12 - Use of blow
Industrial agents for foam production SU3
Foaming [CS132].
Production of foam-based objects
[CS125].
0
16
PROC 13 -Treatment of
articles by dipping and
pouring
Industrial SU3
Dipping, immersion and
pouring [CS4].
0
0
17
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 15 - Use of
laboratory reagents in
small scale laboratories
Industrial SU3
Production or preparation or 0
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Laboratory activities [CS36]. 0
0
19
PROC 19 - Hand-mixing
with intimate contact (only
PPE available)
Industrial SU3
Hand application fingerpaints, pastels,
adhesives [CS72]
0
0
Wear suitable gloves tested to EN374 [PPE15]. 0
PROC
0
0
0
0
0.00
0
PROC
0
0
0
0
0.00
0
PROC
0
0
0
0
0.00
18
Industrial SU3
2010-08-23
0
7/36
Generic Exposure Scenario:
No
1
Industrial Processes relevant for Acetone and Acetone containing
products
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 1 - Use in closed
Industrial - General exposures (closed
process, no likelihood of
SU3
systems) [CS15].
exposure
2010-08-23
Industrial Processes relevant for Acetone and Acetone containing products
CSR-Worker-Acetone-ind \ Inhalation Exposure
Operational Conditions
& typical RMMs
(closed systems) [CS107].; Process
sampling [CS2]. ;
Inhalation Exposure
TRA Predicted
Exposure (ppm) no modifiers
TRA LEV :
efficiency (%)
Dilution
ventilation
effectiveness
(%)
TRA
concentration
factor
TRA
duration
factor
0
0.01
0.000
0.000
0
TRA RPE
factor
Extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (inhalation)
Predicted
Exposure (ppm) modified
0
0
0
0.01
PROC 2 - Use in closed,
continuous process with
occasional controlled
exposure
PROC 3 - Use in closed
batch process (synthesis
or formulation)
Industrial - General exposures (closed Continuous process [CS54]. ;
SU3
systems) [CS15].
Process sampling [CS2].
0
50.00
0.00
0.00
0
0
0
0
50
Industrial - General exposures (closed Batch process [CS55].
SU3
systems) [CS15].
Process sampling [CS2].
0
100.00
0.000
0.00
0
0
0
0
100
PROC 4 - Use in batch and
other process (synthesis)
where opportunity for
exposure arises
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 6 -Calendering
operations
Industrial - Process sampling [CS2]. ;
SU3
(open systems) [CS108]
0
0
100.00
0.00
0.00
0
0
0
0
100
Industrial - Mixing operations (open
SU3
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
250.00
0.00
0.00
0
0
0
0
250
Industrial - Calendering (including
SU3
Banburys) [CS64]
0
0
250.00
0.00
0.00
0
0
0
0
250
7
PROC 7 -Industrial
spraying
Industrial - Spraying/fogging by
with local exhaust ventilation [CS109] 0
SU3
machine application [CS25].
500.00
95.00
0.00
0
0
0
0
25
8
PROC 7 -Industrial
spraying
Industrial - Spraying/fogging by
0
SU3
machine application [CS25].
0
500.00
0.00
30.00
0
0
0
0
350
9
PROC 7 -Industrial
spraying
Industrial - Spraying/fogging by
0
SU3
machine application [CS25].
0
500.00
0.00
0.00
0
0
0
0
50
10
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8b -Transfer of
chemicals from/to vessels/
large containers at
dedicated facilities
PROC 9 -Transfer of
chemicals into small
containers (dedicated filling
line)
PROC 10 - Roller
application or brushing
Industrial - Bulk transfers [CS14].
SU3
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
0
250.00
0.00
0.00
0
0
0
0
250
Industrial - Bulk transfers [CS14].
SU3
Dedicated facility [CS81];
Transfer from/pouring from
containers [CS22].
0
150.00
0.00
0.00
0
0
0
0
150
Industrial - Small package filling [CS7]. Dedicated facility [CS81];
0
SU3
Pouring from small containers [CS9].
200.00
0.00
0.00
0
0
0
0
0
200
Industrial - Rolling, Brushing [CS51].
SU3
250.00
0.00
0.00
0
0
0
0
0
250
2
3
4
5
6
11
12
13
Or: Equipment cleaning and
maintenance [CS39].
0
half mask
8/36
Generic Exposure Scenario:
Industrial Processes relevant for Acetone and Acetone containing
products
TRA LEV :
efficiency (%)
Dilution
ventilation
effectiveness
(%)
TRA
concentration
factor
TRA
duration
factor
TRA RPE
factor
Extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (inhalation)
Predicted
Exposure (ppm) modified
0
250.00
0.00
0.00
0
0
0
0
0
250
Production of foam-based objects
[CS125].
0
100.00
0.00
0.00
0
0
0
0
100
0
0
250.00
0.000
0.00
0
0
0
0
250
Industrial - Production or preparation or 0
SU3
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Industrial - Laboratory activities [CS36]. 0
SU3
0
50.00
0.000
0.00
0
0
0
0
50
0
50.00
0.00
0.00
0
0
0
0
50
0
0
250
Operational Conditions
& typical RMMs
0
15
PROC 12 - Use of blow
Industrial - Foaming [CS132].
agents for foam production SU3
16
PROC 13 -Treatment of
articles by dipping and
pouring
Industrial - Dipping, immersion and
SU3
pouring [CS4].
17
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 15 - Use of
laboratory reagents in
small scale laboratories
14
18
Inhalation Exposure
TRA Predicted
Exposure (ppm) no modifiers
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 10 - Roller
Industrial - Equipment cleaning and
application or brushing
SU3
maintenance [CS39].
No
2010-08-23
Industrial Processes relevant for Acetone and Acetone containing products
CSR-Worker-Acetone-ind \ Inhalation Exposure
19
PROC 19 - Hand-mixing
Industrial - Hand application with intimate contact (only SU3
fingerpaints, pastels,
PPE available)
adhesives [CS72]
0
0
250.00
0.00
0.00
0
0
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0
0
0
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0
0
0
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0
0
0
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0
0
0
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0
0
0
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0
0
0
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0
0
0
9/36
CSR-Worker-Acetone-ind \ Dermal Exposure
Generic Exposure Scenario:
No
1
2
3
4
5
6
Industrial Processes relevant for Acetone and Acetone containing
products
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 1 - Use in closed
Industrial - General exposures (closed
process, no likelihood of
SU3
systems) [CS15].
exposure
PROC 2 - Use in closed,
continuous process with
occasional controlled
exposure
PROC 3 - Use in closed
batch process (synthesis
or formulation)
PROC 4 - Use in batch
and other process
(synthesis) where
opportunity for exposure
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 6 -Calendering
operations
2010-08-23
Industrial Processes relevant for Acetone and Acetone containing products
Operational Conditions
& typical RMMs
(closed systems) [CS107].; Process 0
sampling [CS2]. ;
Dermal Exposure
TRA Predicted
Dermal exposure
(mg/kg/d) - no
modifiers
TRA Dermal
exposure LEV
reduction factor
TRA
concentration
factor
PPE factor
extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (dermal)
Predicted Dermal
Exposure
(mg/kg/d) modified
0.34
0.000
0.000
0
0
0
0.34
Industrial - General exposures (closed Continuous process [CS54]. ;
SU3
systems) [CS15].
Process sampling [CS2].
0
1.37
0.00
0.00
0
0
0
1.37
Industrial - General exposures (closed Batch process [CS55].
SU3
systems) [CS15].
Process sampling [CS2].
0
0.34
0.000
0.00
0
0
0
0.34
Industrial - Process sampling [CS2]. ;
SU3
(open systems) [CS108]
0
0
6.86
0.00
0.00
0
0
0
6.86
Industrial - Mixing operations (open
SU3
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
13.71
0.00
0.00
0
0
0
13.71
Industrial - Calendering (including
SU3
Banburys) [CS64]
0
0
27.43
0.00
0.00
0
0
0
27.43
7
PROC 7 -Industrial
spraying
Industrial - Spraying/fogging by
SU3
machine application
[CS25].
with local exhaust ventilation
[CS109]
0
42.86
0.05
0.00
0
0
0
2.14
8
PROC 7 -Industrial
spraying
Industrial - Spraying/fogging by
SU3
machine application
[CS25].
0
0
42.86
0.00
0.00
0
0
0
42.86
9
PROC 7 -Industrial
spraying
Industrial - Spraying/fogging by
SU3
machine application
[CS25].
0
0
42.86
0.00
0.00
0
0
0
42.86
10
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8b -Transfer of
chemicals from/to vessels/
large containers at
dedicated facilities
PROC 9 -Transfer of
chemicals into small
containers (dedicated
filling line)
Industrial - Bulk transfers [CS14].
SU3
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
0
13.71
0.00
0.00
0
0
0
13.71
Industrial - Bulk transfers [CS14].
SU3
Dedicated facility [CS81];
Transfer from/pouring from
containers [CS22].
0
6.86
0.00
0.00
0
0
0
6.86
0
6.86
0.00
0.00
0
0
0
6.86
11
12
Industrial - Small package filling [CS7]. Dedicated facility [CS81];
SU3
Pouring from small containers
[CS9].
10/36
CSR-Worker-Acetone-ind \ Dermal Exposure
Generic Exposure Scenario:
2010-08-23
Industrial Processes relevant for Acetone and Acetone containing products
Industrial Processes relevant for Acetone and Acetone containing
products
Dermal Exposure
TRA Predicted
Dermal exposure
(mg/kg/d) - no
modifiers
TRA Dermal
exposure LEV
reduction factor
TRA
concentration
factor
PPE factor
extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (dermal)
Predicted Dermal
Exposure
(mg/kg/d) modified
0
27.43
0.00
0.00
0
0
0
27.43
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 10 - Roller
Industrial - Rolling, Brushing [CS51].
application or brushing
SU3
Operational Conditions
& typical RMMs
Or: Equipment cleaning and
maintenance [CS39].
14
PROC 10 - Roller
application or brushing
Industrial - Equipment cleaning and
SU3
maintenance [CS39].
0
0
27.43
0.00
0.00
0
0
0
27.43
15
PROC 12 - Use of blow
agents for foam
production
Industrial - Foaming [CS132].
SU3
Production of foam-based objects
[CS125].
0
0.34
0.00
0.00
0
0
0
0.34
16
PROC 13 -Treatment of
articles by dipping and
pouring
Industrial - Dipping, immersion and
SU3
pouring [CS4].
0
0
13.71
0.000
0.00
0
0
0
13.71
17
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 15 - Use of
laboratory reagents in
small scale laboratories
Industrial - Production or preparation
SU3
or articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Industrial - Laboratory activities
SU3
[CS36].
0
0
0.34
0.000
0.00
0
0
0
0.34
0
0
0.34
0.00
0.00
0
0
0
0.34
No
13
18
19
PROC 19 - Hand-mixing
Industrial - Hand application with intimate contact (only SU3
fingerpaints, pastels,
PPE available)
adhesives [CS72]
0
0
141.43
0.00
0.00
gloves
0
0
28.29
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0.00
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0.00
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0.00
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0.00
0
PROC
0
0
0
0
0.00
0.00
0.00
0
0
0
0.00
11/36
CSR-Worker-Acetone-ind \ RCR
2010-08-23
Industrial Processes relevant for Acetone and Acetone containing products
Generic Exposure Scenario:
Industrial Processes relevant for Acetone and Acetone containing
products
No
Use Descriptor (PROCs) SU 3 /
SU 22
Contributing Scenario
Operational Conditions
& typical RMMs
1
PROC 1 - Use in closed
process, no likelihood of
exposure
Industrial SU3
General exposures (closed
systems) [CS15].
(closed systems) [CS107].; Process
sampling [CS2]. ;
2
PROC 2 - Use in closed,
continuous process with
occasional controlled
exposure
PROC 3 - Use in closed
batch process (synthesis or
formulation)
Industrial SU3
General exposures (closed
systems) [CS15].
Industrial SU3
PROC 4 - Use in batch and
other process (synthesis)
where opportunity for
exposure arises
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 6 -Calendering
operations
7
Risk Characterization
RCR
(inhalation)
RCR
(dermal)
RCR
(all routes)
0
0.00002
0.002
0.002
Continuous process [CS54]. ;
Process sampling [CS2].
0
0.10
0.01
0.11
General exposures (closed
systems) [CS15].
Batch process [CS55].
Process sampling [CS2].
0
0.20
0.002
0.20
Industrial SU3
Process sampling [CS2]. ;
(open systems) [CS108]
0
0
0.20
0.04
0.24
Industrial SU3
Mixing operations (open
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
0.50
0.07
0.57
Industrial SU3
Calendering (including
Banburys) [CS64]
0
0
0.50
0.15
0.65
PROC 7 -Industrial
spraying
Industrial SU3
Spraying/fogging by
with local exhaust ventilation [CS109] 0
machine application [CS25].
0.05
0.01
0.06
8
PROC 7 -Industrial
spraying
Industrial SU3
Spraying/fogging by
0
machine application [CS25].
0
0.70
0.23
0.93
9
PROC 7 -Industrial
spraying
Industrial SU3
Spraying/fogging by
0
machine application [CS25].
0
0.10
0.23
0.33
10
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8b -Transfer of
chemicals from/to vessels/
large containers at
dedicated facilities
Industrial SU3
Bulk transfers [CS14].
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
0
0.50
0.07
0.57
Industrial SU3
Bulk transfers [CS14].
Dedicated facility [CS81];
Transfer from/pouring from
containers [CS22].
0
0.30
0.037
0.34
3
4
5
6
11
12/36
2010-08-23
Industrial Processes relevant for Acetone and Acetone containing products
CSR-Worker-Acetone-ind \ RCR
Generic Exposure Scenario:
Industrial Processes relevant for Acetone and Acetone containing
products
No
Use Descriptor (PROCs) SU 3 /
SU 22
Contributing Scenario
12
PROC 9 -Transfer of
chemicals into small
containers (dedicated filling
line)
PROC 10 - Roller
application or brushing
Industrial SU3
14
PROC 10 - Roller
application or brushing
15
RCR
(inhalation)
RCR
(dermal)
RCR
(all routes)
Small package filling [CS7]. Dedicated facility [CS81];
0
Pouring from small containers [CS9].
0.40
0.04
0.44
Industrial SU3
Rolling, Brushing [CS51].
Or: Equipment cleaning and
maintenance [CS39].
0
0.50
0.15
0.65
Industrial SU3
Equipment cleaning and
maintenance [CS39].
0
0
0.50
0.15
0.65
PROC 12 - Use of blow
Industrial agents for foam production SU3
Foaming [CS132].
Production of foam-based objects
[CS125].
0
0.20
0.00
0.20
16
PROC 13 -Treatment of
articles by dipping and
pouring
Industrial SU3
Dipping, immersion and
pouring [CS4].
0
0
0.50
0.074
0.57
17
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 15 - Use of
laboratory reagents in
small scale laboratories
Industrial SU3
Production or preparation or 0
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Laboratory activities [CS36]. 0
0
0.10
0.00
0.10
0
0.10
0.00
0.10
19
PROC 19 - Hand-mixing
with intimate contact (only
PPE available)
Industrial SU3
Hand application fingerpaints, pastels,
adhesives [CS72]
0
0
0.50
0.15
0.65
0
PROC
0
0
0
0
0.00
0.00
0.00
0
PROC
0
0
0
0
0.00
0.00
0.00
0
PROC
0
0
0
0
0.00
0.00
0.00
13
18
Industrial SU3
Operational Conditions
& typical RMMs
Risk Characterization
13/36
Acetone - Professional
2010-08-23
Identified Professional Generic Exposure Scenarios (GESs) of Acetone
GES No.
EC No.
CAS No.
Subsector
Main SU
Description
PROC
ERC
Acetone
200-662-2
67-64-1
ERC8a
1
2
3
All
Professional
Use in laboratories
Uses
(SU22)
Uses in Coatings
Use as binders
and release
agents
All
Professional
Uses
(SU22)
All
Professional
Uses
(SU22)
Polymer
manufacturing
All
Professional
Uses
(SU22)
5
Polymer
processing
All
Professional
Uses
(SU22)
7
Use in Cleaning
Agents
All
Professional
Uses
(SU22)
4
Use of small quantities within
laboratory settings, including material
transfers and equipment cleaning
PROC10,
PROC15
ERCs are
to be
checked
with the
ECT tool
ERC8a,
Covers the use in coatings (paints,
ERC8c,
inks, adhesives, etc) including
ERC8d,
exposures during use (including
PROC5,
ERC8f
materials receipt, storage, preparation
PROC8a,
and transfer from bulk and semi-bulk,
PROC10, ERCs are
application by spray, roller, brush,
PROC13
to be
spreader by hand or similar methods),
checked
and equipment cleaning, maintenance
with the
and associated laboratory activities.
ECT tool
ERC8a,
PROC1,
ERC8b,
PROC2,
ERC8c,
PROC3,
ERC8d,
PROC4,
Covers the use as binders and release
ERC8e,
PROC5,
agents including material transfers,
ERC8f
PROC6,
mixing, application by spraying,
PROC 8a,
brushing, and handling of waste.
ERCs are
PROC8b,
to be
PROC9,
checked
PROC10,
with the
PROC11
ECT tool
ERC8a,
ERC8d,
ERC8c,
Manufacturing of formulated polymers
ERC8f
including material transfers, moulding
PROC8a
and forming activities, material reERCs are
works and associated maintenance.
to be
checked
with the
ECT tool
ERC8a,
ERC8d,
ERC8c,
Processing of formulated polymers
ERC8f
including material transfers, moulding
PROC8a
and forming activities, material reERCs are
works and associated maintenance.
to be
checked
with the
ECT tool
PROC1,
PROC2,
Covers the use as a component of
PROC3,
ERC8a
cleaning products including
PROC4,
pouring/unloading from drums or
PROC5,
ERCs are
containers; and exposures during
PROC8a,
to be
mixing/diluting in the preparatory phase PROC8b,
checked
and cleaning activities (including
PROC9,
with the
spraying, brushing, dipping, wiping
PROC10,
ECT tool
automated and by hand).
PROC11,
PROC13,
PROC19
x
+
PROC19
x
+
PROC1,
PROC2,
PROC3,
PROC4,
PROC8b,
PROC9,
PROC11,
PROC15,
PROC19
x
x
+
PROC1
PROC2
PROC8b
PROC9
PROC14
x
+
PROC1
PROC2
PROC8b
PROC9
PROC14
x
+
ERC8d
14/36
Acetone - Professional
GES No.
EC No.
CAS No.
8
9
10
11
2
Subsector
2010-08-23
Main SU
Description
PROC
ERC
ERC8d
PROC1,
PROC2,
ERCs are
PROC3,
to be
PROC4,
checked
PROC8a,
with the
PROC8b
ECT tool
PROC1,
ERC8a,
PROC2,
ERC8d
Use as an agrochemical excipient for
All
PROC4,
application by manual or machine
Professional
PROC8a, ERCs are
Agrochemical uses
spraying, smokes and fogging;
Uses
PROC8b,
to be
including equipment clean-downs and
(SU22)
PROC11, checked
disposal.
PROC13, with the
PROC19 ECT tool
ERC8d
PROC1,
All
Ice prevention and de-icing of vehicles, PROC2, ERCs are
De-icing and anti- Professional
aircraft and other equipment by
PROC8b,
to be
icing applications
Uses
spraying
PROC11, checked
(SU22)
PROC19 with the
ECT tool
ERC8d
Covers exposures arising from the
PROC1,
All
manufacture and use of slurry
PROC3, ERCs are
Explosives
Professional
explosives (including materials
PROC5,
to be
manufacture & use
Uses
transfer, mixing and charging) and
PROC8a, checked
(SU22)
equipment cleaning
PROC8b with the
ECT tool
Use in Oil field
drilling and
production
operations
Polymer Examples:
All
Professional
Uses
(SU22)
Covers the use as a component of
cleaning products including
pouring/unloading from drums or
containers
Acetone
200-662-2
67-64-1
x
x
x
x
FRP, UV, VE
Please note also: PC's and AC's are only for comsumer.
For checking ERC's please use the respective environmental calculation tool (ECT) ECT Acetone or
ECT Phenol or ECT Cumene or ECT AMS or ECT ACP
15/36
Acetone - Professional
2010-08-23
Identified Professional PROCs
PROC No.
EC No.
CAS No.
Acetone
200-662-2
67-64-1
PROC1
x
PROC2
x
PROC3
x
PROC4
x
PROC5
x
PROC6
x
PROC8a
x
PROC8b
x
PROC9
x
PROC10
(2 uses)
x
PROC11
x
PROC13
x
PROC14
x
PROC15
x
PROC19
x
Sum
15
16/36
2010-08-23
Main sector of Use: SU22 = All Professional Uses
CSR-Worker-Acetone-prof \ Identification
Generic Exposure Scenario:
Substance specific information
Substance
CASnr
Substance volatility:
TRA volatility range
physical property
67-64-1
233 hPA
high
liquid
Section 1
Exposure Scenario
Processes, tasks, activities covered
Life Cycle Stage / Sector of Use
Applicable Use Descriptors (PROC or PC)
Exposure Scenario Title
Main sector of Use: SU22 = All Professional Uses
All Professional Processes relevant for Acetone and Acetone containing products.
SU22 = All Professional Uses
PROC1, PROC2, PROC3, PROC4, PROC5, PROC6, PROC8a, PROC8b, PROC9, PROC10, PROC11, PROC13, PROC15, PROC19
Applicable Use Descriptors (ERC or SpERC)
Default Operational Conditions
ERCs and local conditions are to be checked with the Excel tool ECT Acetone
Product characteristics
Acute Hazard
General measures
concentration of substance in product
physical form of product
frequency and duration of use
other Operational Conditions of use
Reference Values
DNEL worker - inhalation (long term)
DNEL worker - inhalation (short term)
DNEL worker - dermal (long term)
500
0
186
ppm
ppm
mg/kg/day
R phrases: 11-Highly flammable, 36-Irritating to eyes, 66-Repeated exposure may cause skin dryness or cracking, 67-Vapours may cause
drowsiness and dizziness
Locate bulk storage outdoors [E2]
Use suitable eye protection [PPE26]
If repeated and/or prolonged skin exposure to the substance is likely, then wear suitable gloves tested to EN374 and provide employee
skin care programmes [PPE20]
Provide a good standard of general ventilation. Natural ventilation is from doors, windows etc. Controlled ventilation means air is supplied
or removed by a powered fan. [E1]
Covers percentage substance in the product up to 100 % (unless stated differently) [G13].
Liquid, vapour pressure > 10 kPa [OC5].
Covers daily exposures up to 8 hours (unless stated differently) [G2]
Assumes a good basic standard of occupational hygiene is implemented [G1]. ;
17/36
Main sector of Use: SU22 = All Professional Uses
CSR-Worker-Acetone-prof \ Identification
Section 2
Section 2.1
Product characteristics
Amounts used
Frequency and duration of use
Other Operational Conditions of use affecting
environmental exposure
Technical onsite conditions and measures to
reduce or limit discharges, air emissions and
releases to soil
Organisation measures to prevent/limit release
from site
Conditions and measures related to municipal
sewage treatment plant
Conditions and measures related to external
treatment of waste for disposal
Conditions and measures related to external
recovery of waste
Other environmental control measures additional
to above
Section 2.2
Section 3
3.1. Health
3.2. Environment
Section 4
2010-08-23
Operational conditions and risk management measures
Control of environmental exposure
substance is a unique structure, ketone, readily biodegradable
Annual site tonnage (tonnes/year): please use the Excel-Tool 'ECT Acetone' to calculate your maxium tonnage/year
Emission Days (days/year): 360d/y
Indoor/Outdoor use
Common practices vary across sites thus conservative process release estimates used.Typical technical measures are closed systems or scrubbers
or charcoal adsorbers.Typical onsite offgas treatment technology provides removal efficiency of 90 %
Common practices vary across sites thus conservative process release estimates used. Please use the Excel-Tool 'ECT Acetone' to check your
local conditions.
Please use the Excel-Tool 'ECT Acetone' to check your local conditions.
External treatment and disposal of waste should comply with applicable regulations
External treatment and disposal of waste should comply with applicable regulations
none
Control of worker exposure
see chapter RMMs
Exposure Estimation
GES Worker Chemical Safety Assessment (CSA) Template
http://cefic.org/templates/shwPublications.asp?HID=750
ECT Acetone
http://www.reachcentrum.eu/EN/consortium-management/consortia-under-reach/phenol-derivatives-reach-consortium.aspx
Guidance to check compliance with the Exposure Scenario
4.1. Health
Guidance is based on assumed operating conditions which may not be applicable to all sites; thus, scaling may be necessary to define appropriate
site-specific risk management measures.
4.2. Environment
Guidance is based on assumed operating conditions which may not be applicable to all sites; thus, scaling may be necessary to define appropriate
site-specific risk management measures.
18/36
CSR-Worker-Acetone-prof \ RMMs
Generic Exposure Scenario:
No
1
2
3
4
5
6
7
Professional Processes relevant for Acetone and Acetone containing products
Professional Processes relevant for Acetone and Acetone containing
products
Risk Management Measures (RMMs)
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 1 - Use in closed
Professional General exposures (closed
process, no likelihood of
- SU22
systems) [CS15].
exposure
Operational Conditions
& typical RMMs
(closed systems) [CS107].; Process
sampling [CS2]. ;
PROC 2 - Use in closed,
continuous process with
occasional controlled
exposure
PROC 3 - Use in closed
batch process (synthesis or
formulation)
Professional General exposures (closed
- SU22
systems) [CS15].
Continuous process [CS54]. ;
Process sampling [CS2].
0
Sample via a closed loop or other system to avoid exposure [E8].; Handle substance within a closed system [E47].
Professional General exposures (closed
- SU22
systems) [CS15].
Batch process [CS55].
Process sampling [CS2].
0
Sample via a closed loop or other system to avoid exposure [E8].; Handle substance within a closed system [E47].
PROC 4 - Use in batch and
other process (synthesis)
where opportunity for
exposure arises
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 6 -Calendering
operations
Professional Process sampling [CS2]. ;
- SU22
(open systems) [CS108]
0
0
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55]. ;
0
Process sampling [CS2]. ;
with local exhaust ventilation [CS109]
Ensure material transfers are under containment or extract ventilation [E66]. Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
Ensure operation is undertaken outdoors [E69]. Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
Avoid carrying out activities involving exposure for more than 4 hours [28].
0
Ensure operation is undertaken outdoors [E69]. 0
Ensure operation is undertaken outdoors [E69]. 0
Avoid carrying out activities involving exposure for more than 4 hours [28].
9
PROC 6 -Calendering
operations
0
Professional Calendering (including
- SU22
Banburys) [CS64];
with local exhaust ventilation
[CS109]
Professional Calendering (including
0
- SU22
Banburys) [CS64]
10
PROC 6 -Calendering
operations
Professional Calendering (including
- SU22
Banburys) [CS64]
11
PROC 8a -Transfer of
Professional Bulk transfers [CS14].
chemicals from/to vessels/ - SU22
large containers at non
dedicated facilities
8
2010-08-23
0
0
Non-dedicated facility [CS82];
0
Transfer from/pouring from
containers [CS22]. ;
with local exhaust ventilation [CS109]
adviced under REACh
Sample via a closed loop or other system to avoid exposure [E8].; Handle substance within a closed system [E47].
Ensure material transfers are under containment or extract ventilation [E66]. 19/36
CSR-Worker-Acetone-prof \ RMMs
Generic Exposure Scenario:
No
12
13
14
15
16
Use Descriptor (PROCs)
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8b -Transfer of
chemicals from/to vessels/
large containers at
dedicated facilities
PROC 9 -Transfer of
chemicals into small
containers (dedicated filling
line)
PROC 10 - Roller
application or brushing
Professional Processes relevant for Acetone and Acetone containing products
Professional Processes relevant for Acetone and Acetone containing
products
SU 3 /
SU 22
Contributing Scenario
Professional Bulk transfers [CS14].
- SU22
Operational Conditions
& typical RMMs
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
Professional Bulk transfers [CS14].
- SU22
Professional Bulk transfers [CS14].
- SU22
2010-08-23
Risk Management Measures (RMMs)
0
adviced under REACh
Ensure operation is undertaken outdoors [E69]. Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
0
Avoid carrying out activities involving exposure for more than 4 hours [28].
Dedicated facility [CS81];
Transfer from/pouring from
containers [CS22].
0
Professional Small package filling [CS7]. Dedicated facility [CS81];
0
- SU22
Pouring from small containers [CS9].
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
0
maintenance [CS39]. ;
with local exhaust ventilation [CS109]
Ensure material transfers are under containment or extract ventilation [E66]. 17
PROC 10 - Roller
application or brushing
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
maintenance [CS39].
0
Limit the substance content in the product to 25% [OC18].
18
PROC 10 - Roller
application or brushing
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
maintenance [CS39].
0
Avoid carrying out activities involving exposure for more than 4 hours [28].
19
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual with local exhaust ventilation [CS109] 0
- SU22
application [CS24].
Ensure material transfers are under containment or extract ventilation [E66]. 20
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
Limit the substance content in the product to 25% [OC18].Ensure operation is undertaken outdoors [E69]. Avoid carrying out activities involving exposure for more than 4 hours [28].
21
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
Avoid carrying out activities involving exposure for more than 1 hour [27].
22
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
Wear a respirator conforming to EN140 with Type A filter or better. [PPE22]
20/36
CSR-Worker-Acetone-prof \ RMMs
Generic Exposure Scenario:
No
23
Professional Processes relevant for Acetone and Acetone containing products
Professional Processes relevant for Acetone and Acetone containing
products
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 13 -Treatment of
Professional Dipping, immersion and
articles by dipping and
- SU22
pouring [CS4].
pouring
Operational Conditions
& typical RMMs
0
2010-08-23
Risk Management Measures (RMMs)
adviced under REACh
0
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 15 - Use of
laboratory reagents in
small scale laboratories
Professional Production or preparation or with local exhaust ventilation [CS109] 0
- SU22
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
0
Professional Production or preparation or 0
- SU22
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Professional Laboratory activities [CS36]. 0
0
- SU22
Ensure material transfers are under containment or extract ventilation [E66]. 27
PROC 19 - Hand-mixing
with intimate contact (only
PPE available
Professional Hand application - SU22
fingerpaints, pastels,
adhesives [CS72]
0
0
Limit the substance content in the product to 25% [OC18].Wear suitable gloves tested to EN374 [PPE15]. 28
PROC 19 - Hand-mixing
with intimate contact (only
PPE available
Professional Hand application - SU22
fingerpaints, pastels,
adhesives [CS72]
0
0
Avoid carrying out activities involving exposure for more than 1 hour [27].
24
25
26
Avoid carrying out activities involving exposure for more than 4 hours [28].
21/36
CSR-Worker-Acetone-prof \ Inhalation Exposure
Generic Exposure Scenario:
No
1
2
3
4
5
6
7
Professional Processes relevant for Acetone and Acetone containing
products
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 1 - Use in closed
Professional General exposures (closed
process, no likelihood of
- SU22
systems) [CS15].
exposure
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
Operational Conditions
& typical RMMs
(closed systems) [CS107].; Process
sampling [CS2]. ;
Inhalation Exposure
TRA Predicted
Exposure (ppm) no modifiers
TRA LEV :
efficiency (%)
Dilution
ventilation
effectiveness
(%)
TRA
concentration
factor
TRA
duration
factor
0
0.01
0.000
0.000
0
TRA RPE
factor
Extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (inhalation)
Predicted
Exposure (ppm) modified
0
0
0
0.01
PROC 2 - Use in closed,
continuous process with
occasional controlled
exposure
PROC 3 - Use in closed
batch process (synthesis
or formulation)
Professional General exposures (closed Continuous process [CS54]. ;
- SU22
systems) [CS15].
Process sampling [CS2].
0
50.00
0.00
0.00
0
0
0
0
50
Professional General exposures (closed Batch process [CS55].
- SU22
systems) [CS15].
Process sampling [CS2].
0
100.00
0.000
0.00
0
0
0
0
100
PROC 4 - Use in batch and
other process (synthesis)
where opportunity for
exposure arises
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 6 -Calendering
operations
Professional Process sampling [CS2]. ;
- SU22
(open systems) [CS108]
0
0
250.00
0.00
0.00
0
0
0
0
250
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55]. ;
0
Process sampling [CS2]. ;
with local exhaust ventilation [CS109]
500.00
80.00
0.00
0
0
0
0
100
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
500.00
0.00
30.00
0
0
0
0
350
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
500.00
0.00
0.00
0
1-4 hours
0
0
300
0
600.00
80.00
0.00
0
0
0
0
420
0
600.00
0.00
30.00
0
0
0
0
420
9
PROC 6 -Calendering
operations
Professional Calendering (including
0
- SU22
Banburys) [CS64];
with local exhaust ventilation
[CS109]
Professional Calendering (including
0
- SU22
Banburys) [CS64]
10
PROC 6 -Calendering
operations
Professional Calendering (including
- SU22
Banburys) [CS64]
0
0
600.00
0.00
0.00
0
1-4 hours
0
0
360
11
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
Professional Bulk transfers [CS14].
- SU22
Non-dedicated facility [CS82];
0
Transfer from/pouring from
containers [CS22]. ;
with local exhaust ventilation [CS109
Non-dedicated facility [CS82];
0
Transfer from/pouring from
containers [CS22].
500.00
80.00
0.00
0
0
0
0
100
500.00
0.00
30.00
0
0
0
0
350
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
500.00
0.00
0.00
0
1-4 hours
0
0
300
8
12
13
Professional Bulk transfers [CS14].
- SU22
Professional Bulk transfers [CS14].
- SU22
0
22/36
CSR-Worker-Acetone-prof \ Inhalation Exposure
Generic Exposure Scenario:
No
14
15
16
Professional Processes relevant for Acetone and Acetone containing
products
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 8b -Transfer of
Professional Bulk transfers [CS14].
chemicals from/to vessels/ - SU22
large containers at
dedicated facilities
PROC 9 -Transfer of
Professional Small package filling [CS7].
chemicals into small
- SU22
containers (dedicated filling
line)
PROC 10 - Roller
Professional Rolling, Brushing [CS51].
application or brushing
- SU22
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
Inhalation Exposure
TRA Predicted
Exposure (ppm) no modifiers
TRA LEV :
efficiency (%)
Dilution
ventilation
effectiveness
(%)
TRA
concentration
factor
TRA
duration
factor
0
250.00
0.00
0.00
0
0
Dedicated facility [CS81];
0
Pouring from small containers [CS9].
250.00
0.00
0.00
0
0
Or: Equipment cleaning and
0
maintenance [CS39]. ;
with local exhaust ventilation [CS109]
500.00
80.000
0.00
0
Operational Conditions
& typical RMMs
Dedicated facility [CS81];
Transfer from/pouring from
containers [CS22].
TRA RPE
factor
Extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (inhalation)
Predicted
Exposure (ppm) modified
0
0
250
0
0
0
250
0
0
0
0
100
17
PROC 10 - Roller
application or brushing
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
maintenance [CS39].
0
500.00
0.000
0.00
5-25%
0
0
0
0
300
18
PROC 10 - Roller
application or brushing
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
maintenance [CS39].
0
500.00
0.00
0.00
0
1-4 hours
0
0
0
300
19
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual with local exhaust ventilation [CS109] 0
- SU22
application [CS24].
1000.00
80.00
0.00
0
0
0
0
0
200
20
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
1000.00
0.00
30.00
5-25%
1-4 hours
0
0
0
252
21
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
1000.00
0.00
0.00
0
15 min-1
hour
0
0
0
200
22
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
1000.00
0.00
0.00
0
0
half mask
0
0
100
23
PROC 13 -Treatment of
articles by dipping and
pouring
Professional Dipping, immersion and
- SU22
pouring [CS4].
0
250.00
0.00
0.00
0
0
0
0
250
24
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 15 - Use of
laboratory reagents in
small scale laboratories
Professional Production or preparation or with local exhaust ventilation [CS109] 0
- SU22
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Professional Production or preparation or 0
0
- SU22
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Professional Laboratory activities [CS36]. 0
0
- SU22
500.00
80.00
0.00
0
0
0
0
100
500.00
0.00
0.00
0
1-4 hours
0
0
300
50.00
0.00
0.00
0
0
0
0
50
25
26
0
23/36
CSR-Worker-Acetone-prof \ Inhalation Exposure
Generic Exposure Scenario:
No
27
28
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
Professional Processes relevant for Acetone and Acetone containing
products
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 19 - Hand-mixing
Professional Hand application with intimate contact (only - SU22
fingerpaints, pastels,
PPE available
adhesives [CS72]
Operational Conditions
& typical RMMs
0
PROC 19 - Hand-mixing
Professional Hand application with intimate contact (only - SU22
fingerpaints, pastels,
PPE available
adhesives [CS72]
0
Inhalation Exposure
TRA Predicted
Exposure (ppm) no modifiers
TRA LEV :
efficiency (%)
Dilution
ventilation
effectiveness
(%)
TRA
concentration
factor
TRA
duration
factor
0
500.00
0.00
0.00
5-25%
0
500.00
0.00
0.00
0
TRA RPE
factor
Extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (inhalation)
Predicted
Exposure (ppm) modified
0
0
0
300
15 min-1
hour
0
0
100
24/36
CSR-Worker-Acetone-prof \ Dermal Exposure
Generic Exposure Scenario:
No
1
2
3
4
5
6
7
Professional Processes relevant for Acetone and Acetone containing
products
SU 3 /
Use Descriptor (PROCs) SU 22
Contributing Scenario
PROC 1 - Use in closed
Professional General exposures (closed
process, no likelihood of
- SU22
systems) [CS15].
exposure
PROC 2 - Use in closed,
continuous process with
occasional controlled
exposure
PROC 3 - Use in closed
batch process (synthesis
or formulation)
PROC 4 - Use in batch
and other process
(synthesis) where
opportunity for exposure
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 6 -Calendering
operations
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
Operational Conditions
& typical RMMs
(closed systems) [CS107].; Process 0
sampling [CS2]. ;
Dermal Exposure
TRA Predicted
Dermal exposure
(mg/kg/d) - no
modifiers
TRA Dermal
exposure LEV
reduction factor
TRA
concentration
factor
PPE factor
extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (dermal)
Predicted Dermal
Exposure
(mg/kg/d) modified
0.34
0.000
0.000
0
0
0
0.34
Professional General exposures (closed Continuous process [CS54]. ;
- SU22
systems) [CS15].
Process sampling [CS2].
0
1.37
0.00
0.00
0
0
0
1.37
Professional General exposures (closed Batch process [CS55].
- SU22
systems) [CS15].
Process sampling [CS2].
0
0.34
0.000
0.00
0
0
0
0.34
Professional Process sampling [CS2]. ;
- SU22
(open systems) [CS108]
0
0
6.86
0.00
0.00
0
0
0
6.86
Professional Mixing operations (open
- SU22
systems) [CS30].
0
13.71
0.01
0.00
0
0
0
0.07
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55]. ;
Process sampling [CS2]. ;
with local exhaust ventilation
[CS109]
Batch process [CS55].
Process sampling [CS2].
0
13.71
0.00
0.00
0
0
0
13.71
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
13.71
0.00
0.00
0
0
0
13.71
0
0
27.43
0.05
0.00
0
0
0
27.43
0
0
27.43
0.00
0.00
0
0
0
27.43
9
PROC 6 -Calendering
operations
Professional Calendering (including
- SU22
Banburys) [CS64];
with local exhaust
ventilation [CS109]
Professional Calendering (including
- SU22
Banburys) [CS64]
10
PROC 6 -Calendering
operations
Professional Calendering (including
- SU22
Banburys) [CS64]
0
0
27.43
0.00
0.00
0
0
0
27.43
11
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
Professional Bulk transfers [CS14].
- SU22
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22]. ;
with local exhaust ventilation
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
0
13.71
0.01
0.00
0
0
0
0.14
0
13.71
0.00
0.00
0
0
0
13.71
8
12
Professional Bulk transfers [CS14].
- SU22
25/36
CSR-Worker-Acetone-prof \ Dermal Exposure
Generic Exposure Scenario:
No
13
14
15
Use Descriptor (PROCs)
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8b -Transfer of
chemicals from/to vessels/
large containers at
dedicated facilities
PROC 9 -Transfer of
chemicals into small
containers (dedicated
filling line)
PROC 10 - Roller
application or brushing
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
Professional Processes relevant for Acetone and Acetone containing
products
Dermal Exposure
TRA Predicted
Dermal exposure
(mg/kg/d) - no
modifiers
TRA Dermal
exposure LEV
reduction factor
TRA
concentration
factor
PPE factor
extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (dermal)
Predicted Dermal
Exposure
(mg/kg/d) modified
0
13.71
0.00
0.00
0
0
0
13.71
0
6.86
0.00
0.00
0
0
0
6.86
Professional Small package filling [CS7]. Dedicated facility [CS81];
- SU22
Pouring from small containers
[CS9].
0
6.86
0.00
0.00
0
0
0
6.86
Professional Rolling, Brushing [CS51].
- SU22
0
27.43
0.050
0.00
0
0
0
1.37
0
27.43
0.000
5-25%
0
0
0
16.46
SU 3 /
SU 22
Contributing Scenario
Professional Bulk transfers [CS14].
- SU22
Operational Conditions
& typical RMMs
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
Professional Bulk transfers [CS14].
- SU22
Dedicated facility [CS81];
Transfer from/pouring from
containers [CS22].
17
PROC 10 - Roller
application or brushing
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
maintenance [CS39]. ;
with local exhaust ventilation
[CS109]
Or: Equipment cleaning and
maintenance [CS39].
18
PROC 10 - Roller
application or brushing
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
maintenance [CS39].
0
27.43
0.00
0.00
0
0
0
27.43
19
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual with local exhaust ventilation
- SU22
application [CS24].
[CS109]
0
107.14
0.02
0.00
0
0
0
2.14
20
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
107.14
0.00
5-25%
0
0
0
64.28
21
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
107.14
0.00
0.00
0
0
0
107.14
22
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
107.14
0.00
0.00
0
0
0
107.14
23
PROC 13 -Treatment of
articles by dipping and
pouring
Professional Dipping, immersion and
- SU22
pouring [CS4].
0
0
13.71
0.00
0.00
0
0
0
13.71
24
PROC 14 - Production of Professional Production or preparation
preparations or articles by - SU22
or articles by tabletting,
tabletting, compression,
compression, extrusion or
extrusion, pelletisation
pelletisation [CS100]
with local exhaust ventilation
[CS109]
0
3.43
0.10
0.00
0
0
0
0.34
16
26/36
CSR-Worker-Acetone-prof \ Dermal Exposure
Generic Exposure Scenario:
No
25
26
Use Descriptor (PROCs)
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 15 - Use of
laboratory reagents in
small scale laboratories
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
Professional Processes relevant for Acetone and Acetone containing
products
SU 3 /
SU 22
Contributing Scenario
Professional Production or preparation
- SU22
or articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Professional Laboratory activities
- SU22
[CS36].
Dermal Exposure
TRA Predicted
Dermal exposure
(mg/kg/d) - no
modifiers
TRA Dermal
exposure LEV
reduction factor
TRA
concentration
factor
PPE factor
extra
exposure
modifier:
[optional]
Free text - comment
to clarify additional
modifier (dermal)
Predicted Dermal
Exposure
(mg/kg/d) modified
Operational Conditions
& typical RMMs
0
0
3.43
0.00
0.00
0
0
0
3.43
0
0
0.34
0.00
0.00
0
0
0
0.34
27
PROC 19 - Hand-mixing
Professional Hand application with intimate contact (only - SU22
fingerpaints, pastels,
PPE available
adhesives [CS72]
0
0
141.43
0.00
5-25%
gloves
0
0
16.97
28
PROC 19 - Hand-mixing
Professional Hand application with intimate contact (only - SU22
fingerpaints, pastels,
PPE available
adhesives [CS72]
0
0
141.43
0.00
0.00
0
0
0
141.43
27/36
CSR-Worker-Acetone-prof \ RCR
Generic Exposure Scenario:
Professional Processes relevant for Acetone and Acetone containing
products
No
Use Descriptor (PROCs) SU 3 /
SU 22
Contributing Scenario
1
PROC 1 - Use in closed
process, no likelihood of
exposure
Professional General exposures (closed
- SU22
systems) [CS15].
(closed systems) [CS107].; Process
sampling [CS2]. ;
2
PROC 2 - Use in closed,
continuous process with
occasional controlled
exposure
PROC 3 - Use in closed
batch process (synthesis or
formulation)
Professional General exposures (closed
- SU22
systems) [CS15].
PROC 4 - Use in batch and
other process (synthesis)
where opportunity for
exposure arises
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 5 -Mixing or
blending in batch
processes (multistage
and/or significant contact)
PROC 6 -Calendering
operations
3
4
5
6
7
Operational Conditions
& typical RMMs
Risk Characterization
RCR
(inhalation)
RCR
(dermal)
RCR
(all routes)
0
0.00002
0.002
0.002
Continuous process [CS54]. ;
Process sampling [CS2].
0
0.10
0.01
0.11
Professional General exposures (closed
- SU22
systems) [CS15].
Batch process [CS55].
Process sampling [CS2].
0
0.20
0.002
0.20
Professional Process sampling [CS2]. ;
- SU22
(open systems) [CS108]
0
0
0.50
0.04
0.54
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55]. ;
0
Process sampling [CS2]. ;
with local exhaust ventilation [CS109]
0.20
0.00
0.20
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
0.70
0.07
0.77
Professional Mixing operations (open
- SU22
systems) [CS30].
Batch process [CS55].
Process sampling [CS2].
0
0.60
0.07
0.67
0
0.84
0.15
0.99
0
0.84
0.15
0.99
0
0.72
0.15
0.87
Non-dedicated facility [CS82];
0
Transfer from/pouring from
containers [CS22]. ;
with local exhaust ventilation [CS109]
0.20
0.001
0.20
9
PROC 6 -Calendering
operations
Professional Calendering (including
0
- SU22
Banburys) [CS64];
with local exhaust ventilation
[CS109]
Professional Calendering (including
0
- SU22
Banburys) [CS64]
10
PROC 6 -Calendering
operations
Professional Calendering (including
- SU22
Banburys) [CS64]
11
PROC 8a -Transfer of
Professional Bulk transfers [CS14].
chemicals from/to vessels/ - SU22
large containers at non
dedicated facilities
8
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
0
28/36
CSR-Worker-Acetone-prof \ RCR
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
Generic Exposure Scenario:
Professional Processes relevant for Acetone and Acetone containing
products
No
Use Descriptor (PROCs) SU 3 /
SU 22
Contributing Scenario
12
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8a -Transfer of
chemicals from/to vessels/
large containers at non
dedicated facilities
PROC 8b -Transfer of
chemicals from/to vessels/
large containers at
dedicated facilities
PROC 9 -Transfer of
chemicals into small
containers (dedicated filling
line)
PROC 10 - Roller
application or brushing
Professional Bulk transfers [CS14].
- SU22
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
Professional Bulk transfers [CS14].
- SU22
Professional Bulk transfers [CS14].
- SU22
17
RCR
(inhalation)
RCR
(dermal)
RCR
(all routes)
0
0.70
0.07
0.77
Non-dedicated facility [CS82];
Transfer from/pouring from
containers [CS22].
0
0.60
0.07
0.67
Dedicated facility [CS81];
Transfer from/pouring from
containers [CS22].
0
0.50
0.04
0.54
Professional Small package filling [CS7]. Dedicated facility [CS81];
0
- SU22
Pouring from small containers [CS9].
0.50
0.04
0.54
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
0
maintenance [CS39]. ;
with local exhaust ventilation [CS109]
0.20
0.007
0.21
PROC 10 - Roller
application or brushing
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
maintenance [CS39].
0
0.60
0.09
0.69
18
PROC 10 - Roller
application or brushing
Professional Rolling, Brushing [CS51].
- SU22
Or: Equipment cleaning and
maintenance [CS39].
0
0.60
0.15
0.75
19
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual with local exhaust ventilation [CS109] 0
- SU22
application [CS24].
0.40
0.01
0.41
20
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
0.50
0.35
0.85
21
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
0.40
0.58
0.98
22
PROC 11 - Non industrial
spraying
Professional Spraying/fogging by manual 0
- SU22
application [CS24].
0
0.20
0.58
0.78
13
14
15
16
Operational Conditions
& typical RMMs
Risk Characterization
29/36
CSR-Worker-Acetone-prof \ RCR
2010-08-23
Professional Processes relevant for Acetone and Acetone containing products
Generic Exposure Scenario:
Professional Processes relevant for Acetone and Acetone containing
products
No
Use Descriptor (PROCs) SU 3 /
SU 22
Contributing Scenario
23
PROC 13 -Treatment of
articles by dipping and
pouring
Professional Dipping, immersion and
- SU22
pouring [CS4].
24
RCR
(inhalation)
RCR
(dermal)
RCR
(all routes)
0
0.50
0.07
0.57
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 14 - Production of
preparations or articles by
tabletting, compression,
extrusion, pelletisation
PROC 15 - Use of
laboratory reagents in
small scale laboratories
Professional Production or preparation or with local exhaust ventilation [CS109] 0
- SU22
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Professional Production or preparation or 0
0
- SU22
articles by tabletting,
compression, extrusion or
pelletisation [CS100]
Professional Laboratory activities [CS36]. 0
0
- SU22
0.20
0.002
0.20
0.60
0.02
0.62
0.10
0.002
0.10
27
PROC 19 - Hand-mixing
with intimate contact (only
PPE available
Professional Hand application - SU22
fingerpaints, pastels,
adhesives [CS72]
0
0
0.60
0.09
0.69
28
PROC 19 - Hand-mixing
with intimate contact (only
PPE available
Professional Hand application - SU22
fingerpaints, pastels,
adhesives [CS72]
0
0
0.20
0.76
0.96
25
26
Operational Conditions
& typical RMMs
Risk Characterization
0
30/36
Acetone - Consumer
2010-08-23
Identified Consumer Generic Exposure Scenarios (GESs) of Acetone
GES No.
EC No.
CAS No.
Subsector
Main SU
Description
PC
Covers the use in coatings (paints,
inks, adhesives, etc) including
exposures during use (including
PC1, PC4, PC5, PC9,
product transfer and preparation,
PC10, PC15, PC24,
application by brush, spray by hand or
PC31
similar methods) and equipment
cleaning.
Uses in Coatings
All
Consumer
Uses
(SU21)
2
Use in Cleaning
Agents
All
Consumer
Uses
(SU21)
Covers general exposures to
consumers arising from the use of
household products sold as washing
and cleaning products, aerosols,
coatings, de-icers, lubricants and air
care products.
PC3, PC4, PC9,
PC24, PC32, PC 35,
PC38
3
De-icing and antiicing applications
All
Consumer
Uses
(SU21)
De-icing of vehicles and similar
equipment by spraying
PC4
1
Identified Consumer - PCs & Market Sector - PCs
Acetone
PC
PC1
PC3
PC4
PC9
PC15
PC24
PC31
PC32
PC35
PC38
Coatings
x
0
x
x
x
x
x
0
0
0
Cleanings
0
x
x
x
0
x
0
x
x
x
De-icing
0
0
x
0
0
0
0
0
0
0
PC type
Consumer
Consumer
Market Sector
Consumer
Market Sector
Consumer
Consumer
Market Sector
Consumer
Market Sector
31/36
2010-08-23
CSR-Consumer-Acetone
Main Sector of Use: All Consumer Uses
Section 1
Title
Exposure Scenario Title
Sector of Use (SU code)
Use Descriptor (PC codes)
21
PC LISTS
Processes, tasks, activities covered
DESCRIPTIONS
GES USES
Environmental Release Category
Specific Environmental Release Category
Section 2
Operational conditions and risk management measures
Field for additional statements to explain scenario if required - pending better understanding from ECHA
Section 2.1
Control of consumer exposure
Product characteristics
Physical form of product
liquid
Vapour pressure
24000
Concentration of substance in product
Unless otherwise stated, cover concentrations up to 100% [ConsOC1]
Unless otherwise stated, covers use amounts up to37500g [ConsOC2]; covers skin contact area up to 6600cm2 [ConsOC5]
Amounts used
Frequency and duration of use/exposure
Other Operational Conditions affecting
exposure
Section 2.1.1
PC1:Adhesives, sealants--Glues, hobby use
PC1:Adhesives, sealants--Glues DIY-use (carpet
glue, tile glue, wood parquet glue)
PC1:Adhesives, sealants--Glue from spray
OC
RMM
OC
RMM
OC
RMM
Unless otherwise stated, covers use frequency up to 4 times per day [ConsOC4]; covers exposure up to 8 hours per event
[ConsOC14]
3
Unless otherwise stated assumes use at ambient temperatures [ConsOC15]; assumes use in a 20 m room [ConsOC11];
assumes use with typical ventilation [ConsOC8].
Product categories
Unless otherwise stated, covers concentrations up to 30% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 35.73 cm2 [ConsOC5]; for each use event, covers use
amounts up to 9g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 4.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 30% [ConsOC1]; covers use up to 1 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 110.00 cm2 [ConsOC5]; for each use event, covers use amounts
up to 6390g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 6.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 30% [ConsOC1]; covers use up to 6 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 35.73 cm2 [ConsOC5]; for each use event, covers use amounts
up to 85.05g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 4.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
32/36
Narr_High
2010-08-23
CSR-Consumer-Acetone
Section 2.1.1
PC1:Adhesives, sealants--Sealants
PC3:Air care products--Air care, instant action
(aerosol sprays)
Main Sector of Use: All Consumer Uses
OC
RMM
OC
RMM
PC3:Air care products--Air care, continuous action OC
(solid and liquid)
PC4_n:Anti-freeze and de-icing products-Washing car window
RMM
OC
RMM
PC4_n:Anti-freeze and de-icing products--Pouring OC
into radiator
Product categories
Unless otherwise stated, covers concentrations up to 30% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 35.73 cm2 [ConsOC5]; for each use event, covers use
amounts up to 75g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 1.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use
up to 4 times/day of use[ConsOC4]; for each use event, covers use amounts up to 0.1g [ConsOC2]; covers use under typical
household ventilation [ConsOC8]; covers use in room size of 20m3[ConsOC11]; for each use event, covers exposure up to
0.25hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 10% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 35.70 cm2 [ConsOC5]; for each use event, covers use
amounts up to 0.48g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 8.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 1% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; for each use event, covers use amounts up to 0.5g [ConsOC2]; Covers use in a one car
garage (34m3) under typcial ventilation [ConsOC10]; covers use in room size of 34m3[ConsOC11]; for each use event, covers
exposure up to 0.02hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 10% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 428.00 cm2 [ConsOC5]; for each use event, covers use
amounts up to 2000g [ConsOC2]; Covers use in a one car garage (34m3) under typcial ventilation [ConsOC10]; covers use in
room size of 34m3[ConsOC11]; for each use event, covers exposure up to 0.17hr/event[ConsOC14];
RMM
PC4_n:Anti-freeze and de-icing products--Lock de- OC
icer
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 214.40 cm2 [ConsOC5]; for each use event, covers use
amounts up to 4g [ConsOC2]; Covers use in a one car garage (34m3) under typcial ventilation [ConsOC10]; covers use in room
size of 34m3[ConsOC11]; for each use event, covers exposure up to 0.25hr/event[ConsOC14];
RMM
PC9a:Coatings and paints, fillers putties, thinners-- OC
Waterborne latex wall paint
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 1.5% [ConsOC1]; covers use up to 4 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 428.75 cm2 [ConsOC5]; for each use event, covers use amounts
up to 2760g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 2.20hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 27.5% [ConsOC1]; covers use up to 6 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 428.75 cm2 [ConsOC5]; for each use event, covers use
amounts up to 744g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 2.20hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
RMM
PC9a:Coatings and paints, fillers putties, thinners-- OC
Solvent rich, high solid, water borne paint
RMM
33/36
Narr_High
2010-08-23
CSR-Consumer-Acetone
Main Sector of Use: All Consumer Uses
Section 2.1.1
PC9a:Coatings and paints, fillers putties, thinners-- OC
Aerosol spray can
RMM
PC9a:Coatings and paints, fillers putties, thinners-- OC
Removers (paint-, glue-, wall paper-, sealantremover)
PC9b:Fillers, putties, plasters, modeling clay-Fillers and putty
PC9b:Fillers, putties, plasters, modeling clay-Plasters and floor equalizers
PC9b:Fillers, putties, plasters, modeling clay-Modelling clay
PC9c:Finger paints --Finger paints
PC15_n: Non-metal surface treatment products-Solvent rich, high solid, water borne paint
PC15_n: Non-metal surface treatment products-Aerosol spray can
PC15_n: Non-metal surface treatment products-Removers (paint-, glue-, wall paper-, sealantremover)
RMM
OC
RMM
OC
RMM
OC
RMM
OC
RMM
OC
RMM
OC
RMM
OC
RMM
Product categories
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 2 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; for each use event, covers use amounts up to 215g [ConsOC2]; Covers use in a one car garage
(34m3) under typcial ventilation [ConsOC10]; covers use in room size of 34m3[ConsOC11]; for each use event, covers exposure
up to 0.33hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 3 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 857.50 cm2 [ConsOC5]; for each use event, covers use amounts
up to 491g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of 20m3[ConsOC11];
for each use event, covers exposure up to 2.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 2% [ConsOC1]; covers use up to 12 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 35.73 cm2 [ConsOC5]; for each use event, covers use amounts
up to 85g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of 20m3[ConsOC11];
for each use event, covers exposure up to 4.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 2% [ConsOC1]; covers use up to 12 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 857.50 cm2 [ConsOC5]; for each use event, covers use amounts
up to 13800g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 2.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 1% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 254.40 cm2 [ConsOC5]; for each use event, assumes
swallowed amount of 1g [ConsOC13];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 254.40 cm2 [ConsOC5]; for each use event, assumes
swallowed amount of 1.35g [ConsOC13];
Avoid using at a product concentration greater than 5% [ConsRMM1];
Unless otherwise stated, covers concentrations up to 27.5% [ConsOC1]; covers use up to 6 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 428.75 cm2 [ConsOC5]; for each use event, covers use
amounts up to 744g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 2.20hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 2 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; for each use event, covers use amounts up to 215g [ConsOC2]; Covers use in a one car garage
(34m3) under typcial ventilation [ConsOC10]; covers use in room size of 34m3[ConsOC11]; for each use event, covers exposure
up to 0.33hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 3 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 857.50 cm2 [ConsOC5]; for each use event, covers use amounts
up to 491g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of 20m3[ConsOC11];
for each use event, covers exposure up to 2.00hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
34/36
Narr_High
2010-08-23
CSR-Consumer-Acetone
Main Sector of Use: All Consumer Uses
Section 2.1.1
PC24: Lubricants, greases, and release products-- OC
Liquids
RMM
PC24: Lubricants, greases, and release products-- OC
Pastes
RMM
PC24: Lubricants, greases, and release products-- OC
Sprays
PC31:Polishes and wax blends--Polishes, wax /
cream (floor, furniture, shoes)
PC31:Polishes and wax blends--Polishes, spray
(furniture, shoes)
PC35:Washing and cleaning products (including
solvent based products)--Laundry and dish
washing products
PC35:Washing and cleaning products (including
solvent based products)--Cleaners, liquids (all
purpose cleaners, sanitary products, floor
cleaners, glass cleaners, carpet cleaners, metal
cleaners )
RMM
OC
RMM
OC
RMM
OC
RMM
OC
RMM
PC35:Washing and cleaning products (including OC
solvent based products)--Cleaners, trigger sprays
(all purpose cleaners, sanitary products, glass
cleaners)
RMM
Product categories
Unless otherwise stated, covers concentrations up to 100% [ConsOC1]; covers use up to 4 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 468.00 cm2 [ConsOC5]; for each use event, covers use
amounts up to 2200g [ConsOC2]; Covers use in a one car garage (34m3) under typcial ventilation [ConsOC10]; covers use in
room size of 34m3[ConsOC11]; for each use event, covers exposure up to 0.17hr/event[ConsOC14];
Unless otherwise stated, covers concentrations up to 20% [ConsOC1]; covers use up to 10 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 468.00 cm2 [ConsOC5]; for each use event, covers use
amounts up to 34g [ConsOC2]; covers use in room size of m3[ConsOC11];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 6 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 428.75 cm2 [ConsOC5]; for each use event, covers use amounts
up to 73g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of 20m3[ConsOC11];
for each use event, covers exposure up to 0.17hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 29 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 430.00 cm2 [ConsOC5]; for each use event, covers use
amounts up to 142g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 1.23hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 50% [ConsOC1]; covers use up to 8 days/year[ConsOC3]; covers use up to
1 time/on day of use[ConsOC4]; covers skin contact area up to 430.00 cm2 [ConsOC5]; for each use event, covers use amounts
up to 35g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of 20m3[ConsOC11];
for each use event, covers exposure up to 0.33hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 5% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 857.50 cm2 [ConsOC5]; for each use event, covers use
amounts up to 15g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 0.50hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 5% [ConsOC1]; covers use up to 128 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 857.50 cm2 [ConsOC5]; for each use event, covers use
amounts up to 27g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 0.33hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
Unless otherwise stated, covers concentrations up to 15% [ConsOC1]; covers use up to 128 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; covers skin contact area up to 428.00 cm2 [ConsOC5]; for each use event, covers use
amounts up to 35g [ConsOC2]; covers use under typical household ventilation [ConsOC8]; covers use in room size of
20m3[ConsOC11]; for each use event, covers exposure up to 0.17hr/event[ConsOC14];
No specific RMMs identified beyond those OCs stated
35/36
Narr_High
2010-08-23
CSR-Consumer-Acetone
Section 2.1.1
PC38_n: Welding and soldering products, flux
products--NOTE, n_assessment not in TRA
Main Sector of Use: All Consumer Uses
Product categories
Unless otherwise stated, covers concentrations up to 20% [ConsOC1]; covers use up to 365 days/year[ConsOC3]; covers use up
to 1 time/on day of use[ConsOC4]; for each use event, covers use amounts up to 12g [ConsOC2]; covers use under typical
household ventilation [ConsOC8]; covers use in room size of 20m3[ConsOC11]; for each use event, covers exposure up to
1.00hr/event[ConsOC14];
RMM
No specific RMMs identified beyond those OCs stated
Section 3
Exposure Estimation ('Flexible' heading)
ECHA Note in draft template: Exposure estimation and risk characterisation ratios (for all routes of expoure for consumers and all compartments for environment) resulting from the conditions
described under Sections 2.1 and 2.2.), and the substance properties; make reference to the exposure assessment tool applied. Note: Detail could be confusing for customers. Also may be
an extensive list. Proposal to include a weblink from where these data can be retrieved (a component of GES development).
OC
3.1. Health
Health sub-headings (design as phrases)
Standard phrases expected. Ability to Include a web link.
3.2. Environment
Environment sub-headings (design as phrases)
Standard phrases expected. Ability to Include a web link.
Section 4
Guidance to check compliance with the Exposure Scenario ('Flexible' heading)
Guidance how the DU can evaluate whether he operates within the conditions set in the exposure scenario - scaling tools. Standard phrases
4.1. Health
Health sub-headings (design as phrases)
4.2. Environment
Environment sub-headings (design as phrases)
Utilize TRA, TRA+ and/or CONSEXPO exposure model
Standard phrases
36/36
Narr_High